***** TM100 (full) - geniune review*****

[zippy82]

Ok so wheres the best place to get the software? I'm running AK software and thought if you updated online you got the latest, I'll check what came with the kd900 which came from Tradelocks, don't think I saw a cd just a memory stick but there normally blank

[cqae]

has anyone had any trouble with the toyota remotes?

I am trying to make some toyota remotes, and to program them you need to press the lock & unlock at the same time & the light is meant to flash once, then pressing lock it is meant to flash twice quickly to program it, but my KD remotes wont do that, neither will some remotes I got from autokey, so I cant program any into my little yaris......any ideas?

[cjawahir]

ok i made a remote for the rover , now i need to find a dead car to program it to : )

here is the pic of the software .

cj

[gwee]

Ok so wheres the best place to get the software? I'm running AK software and thought if you updated online you got the latest, I'll check what came with the kd900 which came from Tradelocks, don't think I saw a cd just a memory stick but there normally blank

yet to successfully program a Toyota

[iamfooser]

has anyone had any trouble with the toyota remotes?

I did a toyota Camry with KD without any issue. Could program it right away.

[gwee]

is the frequency issues, already discussed with jimmy and will be sorted

need to send them few remotes for testing, all our Toyota are JDM, not common

[cqae]

ive done a camry & rav4, but had trouble with a yaris today-programming says it needs to flash ones when you press the 2 buttons simultaneously then flash quickly when you press lock to program it, couldnt get that to work.

ended up getting a key from a dealer, didnt do the flash thing but programmed in

[ninja123]

had issues with a 2003 ford focus today, used audi style flip key, had to put transponder in different positions before it would read, bentley stlye flip was ok though.

ninja

[totalkey]

had issues with a 2003 ford focus today, used audi style flip key, had to put transponder in different positions before it would read, bentley stlye flip was ok though.

ninja

No room for glass chip in Audi style , if you look good you will se a small place for carbon in the middle


iPhone Tapatalk

[dekimin]

hi mate, have you been successful?that would be very gratefull if success.

I have KD900, but on my KD there is no such a remote like yours. there is only rover remote like BMW style



Best Regards

[cjawahir]

u need to download the latest software and you will see it , i was able to make the remote not tested it as yet

cj

[cqae]

had issues with a 2003 ford focus today, used audi style flip key, had to put transponder in different positions before it would read, bentley stlye flip was ok though.

ninja

I had a similar problem with a lexus I did ages ago like that, cloned transponder to a TPX2 & it would work if I held it near the reader, but not inside the key. Mine was opposite to yours though, it wouldn't work inside the bentleigh looking key, but ok in the others, only problem is you cant fit the TPX2 in the other styles. In the end I found if I cut away the metal edges of the Bentliegh remote it worked, metal edges must of been shielding it. They clip off so just ground part away & customer was happy

[ninja123]

I was using carbon transponder, not glass, in the end, i had to fit transponder facing backwards and lay flat on inside of key, then it word work.

My bro has a MG, I will test when i can make a key blade :)

ninja

[H.Wessel]

Where you buy KD900 remotes? I am thinking to buy it but I can not find any shop where there are kd900 remotes...

[totalkey]

Where you buy KD900 remotes? I am thinking to buy it but I can not find any shop where there are kd900 remotes...
i buy from honrow.com

[rapidlocksmiths]

You can get the glass chips into the audi style , you just need to do a little work with dremel to get a good placement , though no such issues with the id63 .

i had similar with an old 4c model that wanted a flip key , in the end i used dremel to fit 4c into place then a dab of hot glue to keep it there , that was over a year ago and no comebacks .

for ford i sit and make up a stock of 4c , id60 , id63 so i have them to hand already built .

i also have some built with cn2 chips in and clone to the cn2 from glass .

[obdsystems]

hi does this do CAS3+ BMW lost keys like Tango ie need dump from engine ecu and CAS3+ unit ?

Just outta interest as it does everything else :) wondering

[PremierD]

If it can't .. it soon will ... lol

[H.Wessel]

and what about kd300? its the same that kd900 without stand alone functions? I will mainly use it to make audi 8p remotes and a little more so I am not needing others functions and cost cheaper than kd900.

[totalkey]

and what about kd300? its the same that kd900 without stand alone functions? I will mainly use it to make audi 8p remotes and a little more so I am not needing others functions and cost cheaper than kd900.

Yes, same thing


iPhone Tapatalk

[simaservis1108]

If any of you guys have problems that Windows won't install drivers for TM100,there is a solution.
Device has lost PID,contact me for drivers,and solution.

[bearheroes]

hi does this do CAS3+ BMW lost keys like Tango ie need dump from engine ecu and CAS3+ unit ?

Just outta interest as it does everything else :) wondering

If all keys lost and no ecu file, then how it will be decrypted???


Sent from my Tapatalk using iPhone

[PremierD]

If all keys lost and no ecu file, then how it will be decrypted???


Sent from my Tapatalk using iPhone


New glasses required mate ... :) "hi does this do CAS3+ BMW lost keys like Tango ie need dump from engine ecu and CAS3+ unit ?"

[bearheroes]

My glasses look good...[emoji4]...he asked if it works with same way and i replied how else it could be...


Sent from my Tapatalk using iPhone

[PremierD]

We will agree to disagree on that one mate...:)

[whiskeyman]

I have a friend who has full TM100 clone and so far what what ive seen its working good and he,s very happy.$699 for full and it works good. I have no sympathy for FLY company its just a taste of there own medicine.

FLY cloned a fantastic not so expensive tool tango, and then put there ridiculous price tag on it , as they did with FVDI.


the clone is junk
avoid as i said before


clone
283413

original
283414

[PremierD]

Word on the street is .. that along with FvdI 2015 the TM 100 .. will also need to be connected to tinternet once a month (in line with a lot of other manufacturers of DiaG equipment)to validate the SW and HW ... OH! and Neuk any clones that think about updating ..maybe this can also be confirmed by someone who knows ?

[gwee]

clones will be nuked even without connecting to internet lol is just a matter of time

[obdmaster]

the clone is junk
avoid as i said before


clone
283413

original
283414

Post dump whiskeyman will try on my m8,s tm100 clone tomorrow. His first tm100 clone said same on most payable makers but he got in touch with nancy on skype and she sent him another one straight out, before even sending old one back. Which for him so far been working great.

[whiskeyman]

was this one here from dk i test
http://www.digital-kaos.co.uk/forums/attachments/f177/270211d1406309294-passat-95320-comfort-module-b6-b7-cc-3c-pin-cs-topic-comfort95320.rar

i too have had second unit sent as first one died
not impressed so far

[obdsystems]

clones of clones - gotta lol
funny thing is companies like Fly make a big deal - saying don't buy

Yeah hopefully won't be on-line yet as all these companies might disappear tomorrow :(

so sure asked b4 but where to buy full version - direct?
they all sell basic or clone of clone?

[daniersms]

gwee can you check these files from a Mercedez immo Maskset 1D69J .I bought merc mod 35 but it says unknown version and the files is mine and another one I found here on DK

[daniersms]

And here is another one to check VW Golf 5 unknown version

[gwee]

be patient :) very soon all will be good

[insomnia2009]

were can i buy the full version of this anybody recommend

[super jumbe]

were can i buy the full version of this anybody recommend

Very good question, me too need to know....

[obdsystems]

Very good question, me too need to know....

i asked that before him :disgust:

maybe everybody is basic but we don't want glass half empty

[Siham]

Contact http://www.flyobd.com/ directly its the manufacturer.

[insomnia2009]

Very good question, me too need to know....


i contact them and here is what they told me if i order today full package it will be 699usd however after tomorrow the price will increase too 839 usd im not sure if this is just a sales trick but thats what i was told the user name is nancy.FVDI Abrites Commander Factory Home page best supplier for FVDI Commander (http://www.fvdiobd.com)

[PremierD]

i contact them and here is what they told me if i order today full package it will be 699usd however after tomorrow the price will increase too 839 usd im not sure if this is just a sales trick but thats what i was told the user name is nancy.FVDI Abrites Commander Factory Home page best supplier for FVDI Commander (http://www.fvdiobd.com)

That's for the clone mate ....:)

[insomnia2009]

What do you mean m8

Sent from my GT-I9505 using Tapatalk

[PremierD]

Very simple mate .. that's the one that has been cloned from the one in post 440... and will die (I assume) when you try to update it .. but who am I.... Napoleon took a chance ....look what happened to him lol

[insomnia2009]

Very simple mate .. that's the one that has been cloned from the one in post 440... and will die (I assume) when you try to update it .. but who am I.... Napoleon took a chance ....look what happened to him lol


got you very clear just finished reading entire post and see whats going on ( lesson learned dont read half the thread) :friendly_wink:

[whiskeyman]

mine posted back

thats what i thought of it :disgust:

[obdmaster]

mine posted back

thats what i thought of it :disgust:

My m8,s quite happy with his even though it came up unknown version on passat 2013 dump we tested, even though you say original tm100 did it perfectly. He says everything else he,s used it on as worked well. For the price we both think its a good buy.

[gwee]

My m8,s quite happy with his even though it came up unknown version on passat 2013 dump we tested, even though you say original tm100 did it perfectly. He says everything else he,s used it on as worked well. For the price we both think its a good buy.

how everything else worked well? lol when the original still having bugs lol

the clone debugged..........................:banghead:

" is better we post our own experience, some m8 cannot be trusted too lol

[daniersms]

I just hope they really working on this UNKNOWN VERSION because there are a lot of modules which is simply unknown ---arghhhhh

[jimmykey]

kd remotes only sell by authorised dealers.
so go to keydiy.com and find wether you have a local dealer there
if not has pls contact the keydiy.com directly

[cjawahir]

My m8,s quite happy with his even though it came up unknown version on passat 2013 dump we tested, even though you say original tm100 did it perfectly. He says everything else he,s used it on as worked well. For the price we both think its a good buy.

what u got is basic for the price of full software from the clone tm100 people , so really it was better for your m8 to buy the real tm 100 basic .


cj

[whiskeyman]

just an update
got full refund from nancy :peaceful:

[zvuk44]

Today I would like to add an additional key to Nissan Note 2007 release. Considered dump from BCM, eeprom 95080, TM100 original took a dump, showed that contains two key with radio channel. I inserted a blank chip PCF7936 and pressed the button to record the key, TM100 pretended that everything is recorded, in the end the car and would not start with the new chip. Chip had to throw out. Wrote to the manufacturer about the problem, I hope that will fix the problem.

[obdmaster]

what u got is basic for the price of full software from the clone tm100 people , so really it was better for your m8 to buy the real tm 100 basic .


cj

Well IVECO isnt included and its working great with 95320 body unit, fiat punto isnt included in basic and that works well, toyota isn,t included in basic and that works well this is all whats been tested so far.
Jaguar isnt included in basic but a dump from an x-type dash i had is recognised wether it makes working transponder untested.

[obdsystems]

just an update
got full refund from nancy :peaceful:

Well Napoleon took a chance, and indeed he did meet his Waterloo lol

[PremierD]

KAP diagnostics ...... :roflmao:

Passed on your finding mate .....:)

[kleidaras]

Anyone have try image generator pcf for renault? I try 2 time's and pcf locks. Thanks.

Στάλθηκε από το C1905 μου χρησιμοποιώντας Tapatalk

[gwee]

image generator won't work properly at this moment

[simaservis1108]

Yeah,it locked my card also.
Dump option is good though,remote works too.

[cjawahir]

TM100 was unable to register the key in the Nissan Qashqai 2010 release.
Keys are in 9S12XB256. Tried to register net pcf7936. More and more it starts to upset me!!!

my understanding this can can only work with pcf7946 key even the uk spec navara need the pcf7946 ,

cj

[zvuk44]

[QUOTE = cjawahir; 2411953] my understanding this can can only work with pcf7946 key even the uk spec navara need the pcf7946 ,

cj [/ QUOTE]


Yes original key pcf7946 recorded without problems through diagnosis. But they say that tango is working with these machines on a memory dump, and writes it pcf7936. My opinion is that the manufacturer hurried TM100 compared with the tango! They still work and work on the TM100, that he even went out on a level with the tango.
Let's see what will happen after the update, the picture may change for the better, as long as evaluation TM100 three points out of five :(

[bearheroes]

[QUOTE = cjawahir; 2411953] my understanding this can can only work with pcf7946 key even the uk spec navara need the pcf7946 ,

cj [/ QUOTE]


Yes original key pcf7946 recorded without problems through diagnosis. But they say that tango is working with these machines on a memory dump, and writes it pcf7936. My opinion is that the manufacturer hurried TM100 compared with the tango! They still work and work on the TM100, that he even went out on a level with the tango.

Yes tango work good with these cars,but when 7946 is used remote doesn't work...needs extra programming...at least with 3 i have tried...

[okura]

when downloading new update - actual version 2.8, after download ok wrote: corrupted, where is problem?

[micromax]

all updated is bugfix, i see than work like fvdi2015 and also have time limit.....
Mary from Fly told me 2500$ for unlimited version, better buy orginal tango.

[Galee]

Hi can you explain a little "work like fvdi2015 and also have time limit" ?

[keysmith]

2015-3-13
How to unlock key for VW, Passat B6:
1. Select Tools, Unlocker, VW, Passat B6, Comfort Module, Unlock HITAG by 95320.
2. Open 95320 dump file, put key to be unlocked into coil and click button "Unlocker".

This feature intrigues me. Can somebody who has this tool elaborate on this feature. Is this a method to unlock the transponder in the VAG switchblade remotes?

[electromech]

Has anyone tested them on the land rover discover 3 or range rover sport as this module is very expensive with TMPro and the remote section does not work with that module?

[parapilot]

Red ford 4c and glass chip id13 my tm100 will not read. Any one else have issues? Will read id13 on t5, just not the glass

[zhumerchant]

Red ford 4c and glass chip id13 my tm100 will not read. Any one else have issues? Will read id13 on t5, just not the glass
some TIRIS chip has high sensitivity, you need lift transponder over the coil 2 cm.

Red ford 4c and glass chip id13 my tm100 will not read. Any one else have issues? Will read id13 on t5, just not the glass

[qubits]

So, how do we get the discounted price of $350? The salesperson doesn't seem to know...
Someone share the COUPON code!!

[PremierD]

:roflmao:.....................

[qubits]

maybe little late now, that's July last year :)

Great! So by now price must be lower for chinese tool. :excitement:

[PremierD]

Of course mate .. look up their WWW. and ask ... lol

[zckariya70]

Red ford 4c and glass chip id13 my tm100 will not read. Any one else have issues? Will read id13 on t5, just not the glass

yes u r right

[electromech]

Just downloaded the TM100 user manual ......Its a tango manual...I am just looking for something to do Land Rover Discover 3 keys...Not dealer the keys I have SDD that can do that.....so its between TM100 and Tango I am leaning towards Tango currently...TMPRO2 can do it but cost is CRAZY.Could anyone point me in the right direction.

[ninja123]

I need too, after all, tm100 is a clone, tango will out live it, lots more ?$? I know, but I make more money from ori kit than clones :)

ninja

[Siham]

Just downloaded the TM100 user manual ......Its a tango manual...I am just looking for something to do Land Rover Discover 3 keys...Not dealer the keys I have SDD that can do that.....so its between TM100 and Tango I am leaning towards Tango currently...TMPRO2 can do it but cost is CRAZY.Could anyone point me in the right direction.

you can make keys with sdd for discovery 3 even all keys lost?

[electromech]

you can make keys with sdd for discovery 3 even all keys lost?

Yes possible as with SDD you get precoded key from dealer

[obdsystems]

Just downloaded the TM100 user manual ......Its a tango manual...I am just looking for something to do Land Rover Discover 3 keys...Not dealer the keys I have SDD that can do that.....so its between TM100 and Tango I am leaning towards Tango currently...TMPRO2 can do it but cost is CRAZY.Could anyone point me in the right direction.

With Tmpro2 you don't need basic module software - just the unit and module you need.

So might find alot less. Plan to get for Fiat. Dont think Tango (or thus Clone) cover this to program the fobs

[MCNexo94]

Last version aviable for clone TM100 is 1.45 is old to now

[totoo]

Last version aviable for clone TM100 is 1.45 is old to now

2015-3-20 V2.10 released：
1. Add function: Searching of the 7th byte by existing key for VAG (MEGAMOS48)；
2. Bug fix: Keymaker for Honda bike 93C46；
3. Bug fix: Keymaker for Kawasaki Denso 21175-0811；
4. Bug fix: Keymaker for Fiat Seicento 93c56 exit while loading dump；
5. Bug fix: Keymaker for BMW CAS1；
6. Bug fix: TP22,23,24,25；
7. Add current and expired time tip at online activation dialog；
8. Bug fix: MEGAMOS48 verify not stable；

How to search the 7th byte for VAG:
1.Select TPReader, click "MEGAMOS 48", click button "Search 7th CS"；
2.Input 6-byte component security, select brand, put working key into coil；
3.Click button "Search"
Notes:
This version inclues firmware update. Please DO NOT disconnect PC with TM100 while updating；

[electromech]

With Tmpro2 you don't need basic module software - just the unit and module you need.

So might find alot less. Plan to get for Fiat. Dont think Tango (or thus Clone) cover this to program the fobs

Fly engineer just confirmed that TM100 cant do Land Rover keys ..busy with Tango now seems they can do it but same as TMPro2 where the remote section wont work...if Tango confirms then they more than likely have a new client

[parapilot]

Can tm100 clone to CN1 or CN2?

[Siham]

Fly engineer just confirmed that TM100 cant do Land Rover keys ..busy with Tango now seems they can do it but same as TMPro2 where the remote section wont work...if Tango confirms then they more than likely have a new client

If its for range rover sport 2008 , I did many with tmpro and remote always worked!

[electromech]

If its for range rover sport 2008 , I did many with tmpro and remote always worked!

Are those new keys from dealers?

[Siham]

New keys but not from dealers.

[electromech]

New keys but not from dealers.

Hi I have done some searching but cant seem to find new keys only shells could you please point me in the right direction?

[Siham]

mosmarkey.ru
autokeys.us

[Rito]

Hello, I read about tm100 and abut price loks like interesting...
Actuality have ZedBull original and AVDI original.

gwee (http://www.digital-kaos.co.uk/forums/member.php/352471-gwee) can you provide Tm100 good price for me??
(I had sen mp gwee (http://www.digital-kaos.co.uk/forums/member.php/352471-gwee) but not answer)

thanks

[ninja123]

Is it possible to update the basic version of TM100?

Can modules be purchased separately? or need to buy 62 module package?

Also, where is best place to buy module upgrade from? (if its possible)

Thanks

[Galee]

Yes you can buy from fly or your supplier or aliexpress just check who's cheapest as prices are not all the same. I think when you go in to a option in the tm100 buy module option it then creates a log file with the modules you chose and your device serial number.

[electromech]

Hello, I read about tm100 and abut price loks like interesting...
Actuality have ZedBull original and AVDI original.

gwee (http://www.digital-kaos.co.uk/forums/member.php/352471-gwee) can you provide Tm100 good price for me??
(I had sen mp gwee (http://www.digital-kaos.co.uk/forums/member.php/352471-gwee) but not answer)


thanks

Add one for me too then we would get discount...I am sure if a few of us buy units from them they would look at a discounted rate?

[ninja123]

Can anyone help me? I got TM100 today, install on windows 7 laptop, but when try to run software, I get error message 'the program cant start because mfc110u.dll is missing from your computer'

so I install on windows xp laptop, software runs but wont detect hardware, when i plug in hardware it is asking for driver but fails to install it???

ninja

[ninja123]

where can i find driver?

[ninja123]

thanks tyrone, but these drivers are installed already, how do I install manually? (the ones you sent me)

[paul_12345]

Can anyone help me? I got TM100 today, install on windows 7 laptop, but when try to run software, I get error message 'the program cant start because mfc110u.dll is missing from your computer'

so I install on windows xp laptop, software runs but wont detect hardware, when i plug in hardware it is asking for driver but fails to install it???

ninja

mfc will be the microsoft visual studio runtime library you will just need to install the correct version that tm100 uses for your operating system

and if you want to do the xp drivers then you should get away with installing the drivers then restarting the laptop and then try connecting the interface.

if it still does not work go to control panel system, device manager click on the usb icon that has the warning icon on it, then click update drivers

then select install from a list, you should then be able to specify the folder of the extracted drivers and let it search that folder which should then install it

or do the 'dont search' option and have disk and select the driver from the extracted driver folder

[ninja123]

tried that too :(

in device manager, under usb, all is ok, no warning icon, but no TM100.

under 'other devices' there is tm100 with a warning icon, and no drivers installed, but wont let me choose any drivers.


ninja

[cjawahir]

hi uninstall all and install this on windows 7 , it will detect your device after a min or two .





cj

[ninja123]

windows 7 - got the missing file sorted, software runs but still no device - trying above software now

windows xp - got tm rfid under usb in device manager, but still not detecting device, will try drivers from paul on this one now.

will update later, thanks guys

[ninja123]

windows 7 - still the same after 5 mins

[ninja123]

tried a few times now :(

[ninja123]

A MASSIVE thanks to mr gwee, had me sorted in no time, thanks :)

ninja

[PremierD]

That's the reason that DK.. is, and always will be the best forum. We have members who care ..and provide help f.o.c. 24/7..:)

[ninja123]

is there any module for saab cim?

[qubits]

is there any module for saab cim?

no saab. are you trying to do all keys lost?

[ninja123]

yes, I have tmpro, so may have to buy the module 111 for this job.

ninja

[ninja123]

need to do this job tomorrow!!

module 111 is ?179, job is ?300, key is ?59, so in proffit from first job.

I did have a cim dump and matching key, and i figured out the key data, bit like truecode does it, done a few in the past, but been that long ive lost the key!!!

ninja

[parapilot]

TM100 4D / 46 cloner will be released in about 2 weeks :)

will this be online, or a seperate cloner box to add on?

[Siham]

tmpro2 cracking in progress....................wait for good news :)

GOOD NEWS!!!
TMPRO module are tooo expensive!!!
But problem is not cracking ,its to be sure that it will work like the original.And noo Bugs!

[ninja123]

hi gwee, tm100 working well on other laptop now, but xedbull/effi not work now, asking for missing ftdi files!!

my worry is, if i install missing files/drivers, will my tm100 stop working again?

ninja

[simaservis1108]

Effi and TM100 drivers are colliding,use FTClean between each use of both devices.
It will be OK.

[ninja123]

That will be a pain in the ass, I dont hae time to mess about with this when working mad busy all day!!

I will use yet another laptop for zed/effi.

Thanks for your help

ninja

[electromech]

That will be a pain in the ass, I dont hae time to mess about with this when working mad busy all day!!

I will use yet another laptop for zed/effi.

Thanks for your help

ninja

Ninja from which site have yo purchased this new unit and are there any Tm100 "Clone of a Clone" running around?

[ninja123]

got from obd16.com, cant see any cloned clones yet! 450usd

[ninja123]

u can just update driver for effi, tm100 will still work :)

effi still runs but when i plug in zedbull, thats when it asks for the ftdi bla bla bla.

Ill try it when I get time and report back.

ninja

[ninja123]

loaded drivers for zedbull and all is working again, and TM100 still work :)

Thanks again for your assistance mr gwee.

ninja

[bigkey]

Just wonder if any member can help. Im interested in this TM100 device, maybe a bit overkill for me but just want to learn.
However, not quite sure where to start and if I can handle it. Look at their website and google but cannot find the manual of how to use it.
Im having a rough idea of making keys by load the original eeprom file into this device then reload the "fix" file back to eeprom, but not quite confident about the steps between.
Maybe the people buying this device already have enough knowledge of how to use it, but if the manufacturer can provide a User manual then it would be good for learners like myself.
I dont know if it worths for GWEE to mention this to them.

Cheers all:02.47-tranquillity:

[bigkey]

Would be interested to see this happen

[Siham]

Read dump with programmer ,load it in TM100 or any keyprog ,put transponder and program key ,write new dump in eeprom and start the car.
My friend best manual is you Brain and litle search here on the forum ,just use the search button.
For starting you can download TM100 chips location. :)
BTW : you are member of DK since 5 year and still not learned ..........:stung:

[bigkey]

Yes, I m one of those older generation lockie. Getting on DK forum and feeling "a bit" backward. Wander around on the forum and feel silly as dont really have anything good enough to offer, so I get off. But now there is need to update myself or have to take un-voluntary retire as the technology wheel will push me out. So I decided to catch up and better learning from here. Hope people wont mind as I will be a sucker more than a helper:torn:

[bigkey]

Thank you very much Tyrone, you made me feel less uneasy now. God bless

[bigkey]

just an update
got full refund from nancy :peaceful:

Obviously you dont think the clone Full version TM100 is good enough. Is it much trouble to get your refund? Is the device working ok just for common cars i.e: Toyota, Jeep, Iveco ..

[bigkey]

get original tm100 with updates

OK, got the message. Having original one on the way

[insomnia2009]

me too 4d 46 cloner is a big bonus was going to order cn900 but will try this first will get eeprom and cloning together im ready to order just waiting for it to go on sale

[whiskeyman]

Obviously you dont think the clone Full version TM100 is good enough. Is it much trouble to get your refund? Is the device working ok just for common cars i.e: Toyota, Jeep, Iveco ..

was too many bugs for me
things that don't work correctly will just cost you time
money and loads of frustration

not for me

[totoo]

TM100 46/4D copy box support chip list：
1. 46 copy chip list：CN3/ TPX4/ GMT 46
2. 4D copy chip list：CN1/ CN2/ TPX2/ EH2/ Common blank 4D

[insomnia2009]

i will buy on the day its out already been in contact with them

[bigkey]

TM100 46/4D copy box support chip list：
1. 46 copy chip list：CN3/ TPX4/ GMT 46
2. 4D copy chip list：CN1/ CN2/ TPX2/ EH2/ Common blank 4D

Hi Totoo, Is it a stand alone cloning box or an attachment to TM100 ? Is operation similar to Silca and JMA devices ? Cheers

[Saulius Saulius]

Hello, someone know TM100 can make smart key for Lexus IS220 2007 year? If no, which tool can do that? TmPro2 very expensive module for Lexus smart key 900 euros.

[Saulius Saulius]

to tpx2? if so, many of us here can give you 4 pages from dump to start car

I don't know which transponder, car so far from me, if I go to the car, I need make it at least in a few hours, otherwise I need to stay overnight... :)

Maybe it can do "obd orange Toyota/Lexus smart key programmer"?

[Saulius Saulius]

you have smart key with pg1 - 94?

if so, tm100 can add key to dump

At the moment no, just looking for info, if possible to do that, I will buy a key and will go to the car...

[Saulius Saulius]

Gwee, if I use new key and you add it by eeprom, remote control need to be reprogrammed separately or no? What i mean, client can send for me immo box by post, after i can send programmed key and box back to him.

[cjawahir]

done a suzuki grand vitara 2006 model , need to open engine ecu and remove 93c56 .

Tcode id this vehicle as liana and wipe the dump clean , had to use one from vanos batam install and make key .

cj

[totoo]

Hi Totoo, Is it a stand alone cloning box or an attachment to TM100 ? Is operation similar to Silca and JMA devices ? Cheers
TM100 46/4D copy box is not a standalone cloning box.

[cjawahir]

today i try to use the honda cal tool , the result was part digit and part letters , so the cal is still in hex code so just convert to dec and will be ok , i email the fly company about the problem hope they can fix soon .

cj

[bigkey]

Hi all, learner here. What is Datastream Page 4 in 4D transponder? what do we use it for?
Also I am quite comfortable with reading SOIC8 eeprom, but dont know how to handle Motorola MC68HC... series eeprom ? Please direct me to an easiest tool to handle the task. Thankshttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=312393&stc=1

[bigkey]

When I checked the installed modules in my basic TM100, there are only a few as in attached photo.
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=312426&stc=1Is this standard? I thought seen much more on their website for standard version.
Can some TM100 owners confirm that mine is ok ? Thanks

[ninja123]

Same as mine, on sellers site, there it states there are a lot more, even on basic version, not too happy about that either.

I didnt see myself buying more modules already :(

[PremierD]

Same as mine, on sellers site, there it states there are a lot more, even on basic version, not too happy about that either.

I didnt see myself buying more modules already :(

A bit like that mate :)

[simaservis1108]

All other basic modules in the list work.
Hyundai,Kia,Daewoo,SsangYong,Chery etc etc...

[Galee]

I had the same with mine contacted support zhu I think he showed me the same photo of the few installed modules and said that is correct he also logged on via teamviewer and checked all the basic modules do open and work.

[bigkey]

All other basic modules in the list work.
Hyundai,Kia,Daewoo,SsangYong,Chery etc etc...

So other basic modules are working, just not listed in the "installed modules" ? Thats ok, I can live with it, just wish if they have manual to come with the device

[simaservis1108]

That is correct bigkey.

[cjawahir]

my understanding is only this list is payable the rest is free 1. Iveco
o NEW

[vorovei constantin]

hello
TM100 I have a strange beep noise.
I can somebody enlighten me

[PremierD]

Wear earplugs mate ............lol

[kleidaras]

hello
TM100 I have a strange beep noise.
I can somebody enlighten me


https://www.youtube.com/watch?v=znjY4KJl_1I

[obdsystems]

Hi guys does the full TM100 version do Fiat 500 fobs like TMPro ?

Just wondering :)

[PremierD]

If it can't it will do soon :)

[whiskeyman]

this device still 1300 pounds for full version?

[totoo]

Special price for Tm 100 full version now .

[whiskeyman]

Special price for Tm 100 full version now .

what is this special price

[p1et]

I see promotion 1745 USD till end of May.

[obdsystems]

Where guys?
Price is still same on website

like to buy direct if possible

Special Gwee discount possible lol :)

[whiskeyman]

have trouble justify price against original

[obdsystems]

still where the special offer :) i will ask mr fly n say gwee is my mate :)

[obdsystems]

------------------- :)

[whiskeyman]

i will try say gwee is my father:)

[bigkey]

i will try say gwee is my father:)

Tried that ... didn't work ... ha ha

[bigkey]

Just have a first use of TM100 for 2 jobs today.
key for Camry 2004 ECU 93C86
and image for ID65 for Suzuki Ignis 2002
Both work good

[obdsystems]

:) :) :) :) :)

[cjawahir]

i see the 4d and id 46 attachment sold here http://www.uecutool.com/fly-products/tm100-4d-46-cloning-machine.html

cj

[obdsystems]

Smells like a clone clone to me, email -

-----------------------------------
Dear sir,

thanks for your mail


but our TM100 is original made in china,the update need offer by factory,by e-mail,not online,


we advise you can buy SK80 TANGO


http://www.cardiag.co.uk/tango-key-programmer.html



regards
marshall

-------------------------------------

Seems only safe place could be fly

PS. tho Cardiag.co.uk are a good company

[PremierD]

"made in china,the update need offer by factory,by e-mail,not online,"

Scam .. to promote Tango I guess .:)

[totoo]

Original TM 100 update freely forever . update online forever. now the latest tm 100 version is V3.02

[autofan1965]

Nothing is forever.

[PremierD]

Eh!..... dead is mate ..:) and Taxes .. oh.. and VCDS updates ... and ....lol

[parapilot]

So does anyone know how to use this new cloner / have any instructions before I plug mine in and have a play??

[PremierD]

If it stars ticking ... run like ~~~~ ... lol lol

I saw instructions somewhere .. will try and find them mate .

Just select the 'clone' from the tools menu and follow the prompts .. :)

[parapilot]

I failed on a 46 dispatch 2011. Still playing may well be user error so not going to comment further until iv tried a few more.

As above 4d seams fine.

[Siham]

I failed on a 46 dispatch 2011. Still playing may well be user error so not going to comment further until iv tried a few more.

As above 4d seams fine.


Did you used a snifer and switch ignition on off ?

[totoo]

TM100-46/4D copy box 4D chip Video Link ： https://www.youtube.com/watch?v=Pa7vnuxHTSs&feature=youtu.be

[totoo]

TM100-46/4D copy box 46 chip Video Link ： https://www.youtube.com/watch?v=VHWM_J7a8NU&feature=youtu.be

[parapilot]

Did you used a snifer and switch ignition on off ?
yes used sniffer, and got green light. tried twice didn't work. will try another car.

[mikajna]

Why they write 7936 cloning, is this cloning just PCF7936, or can clone all hitag2 transponders, pcf7936, 7941, 7946, 7947...etc?

[cjawahir]

yes used sniffer, and got green light. tried twice didn't work. will try another car.

did u use the TPH jma clone box ?

cj

[parapilot]

did u use the TPH jma clone box ?

cj
I used the tm100 clone box.

Pug 206 2003 fail. Invalid password or crypto key. Tried 3 times. Humm anyone had a success yet?

[cjawahir]

you will need the decoder box to do id 46 key

cj

[parapilot]

The tm100 clone box says it does id46. You saying I need an additional unit to??

[totoo]

TM100 4D&46 Cloning Machine supports CN1/ CN2/ TPX2/ EH2/ Common 4D.

[autoTkey]

I can't start the program after install. It gives error "ordinal 80 ... FTD..." or something like that. Also I'm having a hard time downloading the TM100-chip-positions.rar file(which is the manual) from the flyobd website - it gives me waiting time of few days and fails to download. Can someone help?

[cjawahir]

The tm100 clone box says it does id46. You saying I need an additional unit to?? as i understand yes .

cj

[cjawahir]

The tm100 clone box says it does id46. You saying I need an additional unit to??

i could be wrong about this , lets see what the fly engineer have to say

cj

[PremierD]

Word on the street is that it is built in ..:)

[parapilot]

2007 punto id46. Failed. Has anyone ever cloned a id46 yet? not working at all here. 4d is ok

[totoo]

2015-6-8 V3.03 released：
1. Add support for new CN2 chip；
2. Bug fix: Copy HITAG2 with crypt key not readable；
3. Software update even if device disconnected；
Notes:
This version inclues firmware 1 update. Please DO NOT disconnect PC with TM100 while updating；

[obeids]

Hi guys.
Been at Fly company today to view the TM100 and the FVDI. To be honest, they are one very disorganised and unprofessional company. They expected me to bring my pc so they could install and use my PC as demo. They didn't have a PC in there own company where their products are setup. They eventually installed TM100 on their one machine and guess what, they themselves couldn't get it to clone a key using their new cloner.
So guys how can we buy from them? Besides they quoting $450 plus $150 for the cloner, plus $100 for Xprog 5.50, yet on their website its $600 for all. I am trying to explain to "MARY" but she don't want to listen (Mind you she speaks english, but understands less than she speaks).
Honestly wasn't impressed at all with FLY Company.
They making big money but not doing things correctly.

[parapilot]

So they couldn't get the clone to work??!!! Has anyone successfully cloned an id46 yet. Iv been failing everytime. Tried once today with the update. Still failed. I'd advise everyone to hang fire on the cloner ATM (unless for 4d)

[obeids]

Hi there.
They requested me to go again today because they say they used the wrong chip and so today they will demonstrate how to copy.
Could you tell me exactly what problem you're facing so that I can ask them and clarify the matter.

[parapilot]

thanks mate, tried the id46 cloning on about 4/5 cars and its always failing, invalid password, or crypto key. i cycle ign, get green light on cloner etc, but never managed to copy id46. ID4d copys fine.

[totoo]

thanks mate, tried the id46 cloning on about 4/5 cars and its always failing, invalid password, or crypto key. i cycle ign, get green light on cloner etc, but never managed to copy id46. ID4d copys fine.


maybe you need TM100 cloner manual.doc, you can get it from GWEE or me

[totoo]

TM100 cloner manual


TM100 cloner > Quick guide

TM100 cloner >
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317736&stc=1


USB connector
USB indicator
Sniffer Antenna
Sniffer On/Off switch
Clear sniffed data switch
Check sniffed data switch
Sniffer indicator
Sniffing process indicator


4D cloning procedure



Connect Cloner to PC, USB indicator display green light. Don’t need to ON the sniffer switch.
Connect TM100 > load TM100 software > select Tools > select Clone > select Tiris 4D.
Follow on screen instructions.
Once decoded successfully, page 4 will be shown.
Use CN1/CN2/TPX2/EH2 transponders > start copying.

46 cloning procedure



Sniff original transponder


Switch On the sniffer > Red Indicator light will be displayed. Press “Check” button > Red light indicate- no data> Green light indicate previous data present and need to be cleared.

If previous data present, press “Clear” button to clear previous data and restart the sniffer.

Position the sniffer antenna near the ignition (about 2cm), turn On the ignition with original key. Observe the “Check” indicator light, upon success, red indicator will blink once. Press “check” button and it should be green, otherwise repeat the procedure again.



Connect cloner to PC, green light should be ON.
Connect TM100 > load TM100 software > select Tools > select Clone > select Hitag 2.
Follow on screen instructions.
Once decoded successfully, crypto key will be shown.
Use YS21/GMT46/CN3 transponders > start copying.

7. http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317575&stc=1

[zhumerchant]

pdf format manual

[zhumerchant]

thanks mate, tried the id46 cloning on about 4/5 cars and its always failing, invalid password, or crypto key. i cycle ign, get green light on cloner etc, but never managed to copy id46. ID4d copys fine.
it's a bug, correct in new version software.

[autoTkey]

Well it still can't with the tools I have. And I'm not an expert - I just asked you how you do it and you didn't share.

[Siham]

TM100 seams to have tooo much bugs , why?
I do not say other tool doesn't have bugs but i we look at the updates there is so much ''Bug fix''!! :(
But good to know they are fixing those ''Bugs".

[PremierD]

You would be moaning like ~~~~ .. (more than usual that is ) if the "Bugs " were not getting fixed wouldn't you :)

[totoo]

TM 100 key programmer 2015-6-16 V3.04 released： 1. Unlock new CN2 chip for 4D copy；
2. Bug fix: Subaru XV, DST80, read page 1 before write；
3. Bug fix: can not generate TP transponder for some ID48；
4. Bug fix: 4E write failed；
Notes:
This version includes firmware 2 update. Please DO NOT disconnect PC with TM100 while updating；

[simaservis1108]

One bug.

Generate key from dump 93C56 Alfa Romeo 166 Immobox - not working.
EFfI - OK.

[insomnia2009]

im trying to decide between this and the cn900 i have been holding a while to see how its going anyone can compare it to the cn900

[Siham]

For keys programming Tm100 is 10000 better than cn900.
For clonng i think cn900 .

:)

[bigkey]

Just order the cloner and update to V3.04 and fail to connect to server all the time, but still showing "Days remain:15".
Hope it wont go down to 0 and not allow me to use it.
Any one struck this ?
Cheers

[autoTkey]

Can anyone already confirm the CN2 renewing function is working(except Gwee!)? I mean for the new 80bit CN2.

[bigkey]

Does TM100 unlocks Hyundai key PCF7936 ? I saw Tango has this function . Dont know if we can re-use the old Hyundai remote keys

[lkjubaking]

Today i try copy 4D to TPX2 -not work- Decode OK (Failed to write transponder)
with TRS5000 works on the first try

[cjawahir]

[QUOTE=lkjubaking;2548615]Today i try copy 4D to TPX2 -not work- Decode OK (Failed to write transponder)
with TRS5000 works on the first try[/Q

what 4d did u try to copy ?

cj

[bigkey]

Hi Guys, maybe just a dumb question but I really don't know. What are the chips "GMT 46" and "Common 4D" ? Need to know to buy chip for my new cloner. Any help would be appreciated

[zhumerchant]

Hi Guys, maybe just a dumb question but I really don't know. What are the chips "GMT 46" and "Common 4D" ? Need to know to buy chip for my new cloner. Any help would be appreciated

GMT46: go to http://www.aliexpress.com/, search GMT46.
Common 4D: all page not locked 4D.

[datapage]

I need to have price tm 100? please pm

[insomnia2009]

did anyone clone id46 thanks

[parapilot]

did anyone clone id46 thanks

No, tried with every update and failed everytime. Either I have a faulty sniffer or id46 just does not work!

[kemaster]

May be he also have worked for CodeCard:)

[obeids]

Hi there.
Can the TM100 do the G Chip. I have an AURIS with no keys. Uses G Chip. Is this ID70 (As claimed by ZHANG FLY Engineer) or is it Tiris DST+?
Which option should be used as the TM100 only shows year 2005 immo box on its list. The DST+ only shows under the smart key option.

Help would be greatly appreciated.

[simaservis1108]

Gwee,are TM100 developers interested in info for new modules?

I have info for around 15 modules to give,if they are interested...

[electromech]

Hopefully some TMPro2 Modules :rock:

[gepakg]

by my opinion Andrius is developer of most important modules of effi:-) sierra only write sw...

regards Gepa


Andrius will be helping to develop few new modules for TM100, in case some of you don't know who is Andrius, he is the co developer for EFFI :)

[gepakg]

by my knowledge i will support everything what i know,and guys who have used this will tell if it is OK:-)))))

regards Gepa


with u and andrius involved, i am sure TM100 will be a super tool :)

[Siham]

So need to change the name of TM100 into DK keyprog . :)
For sure it will be better than Tango and tagkey and other... :)

Good luck Guys.

[bigkey]

DON'T EVER POST OTHERS WORK WITHOUT PERMISSION !!!!!!!!!!!!!!

Hi Gwee, I thought it's ok to ask about TM100 here because most of the TM100 users would visit this threat. Cheers

[westlock]

ninja's tm100 sorted using this driver :)

Hi are these drivers the most recent

i downloaded p1doooo.rar.

when i try to open it all i get is ( it does not apear to be a valid archive)

on windows 7 ultimate

[obeids]

Still waiting for a suitable reply.

[PremierD]

Then wait a bit longer mate ... I'm sure that everyone concerned will be working flat out to answer your life or death question :)

[westlock]

I bought tm 100 from hk lock. When I try to use it doesn't connect. It displays information ( tm100 interface not connected or not run as administrator ) . I have tried on window 7 home premium, window 7 ultimate, I also took it to two computer repair shops who tried to install with no joy. they also tried on window 8 pro without any success . Could this be a fault machine, who am I best contacting to resolve issues.

any help would be gratefully recieved

[bigkey]

he posted my dump without my permission, is that ok?
Sorry... did not see that. Thought he just asks a question about using TM100 (cause I may want to put up some questions too)
Cheers

[simaservis1108]

Gwee,thanks for refering Gary to me.

I sent many information for adding.
TM100 will now have SAAB listed.

[westlock]

Just a short note to thanks Gwee for getting tm100 installed for me

thanks again

[simaservis1108]

There we go :D

More to come...

[simaservis1108]

How?

Let's check.

[simaservis1108]

Yes dump is different,than the one I got.

If anyone can confirm PG3 16 07 FC AA.

[gepakg]

of course he have because serial id & manufacture code are not always on same location,also there have few serious hints if you make red key:-)

and beside of these this module is first immo used on old bikes KTM from 2009 ,new is with 9s12p128,ZADI type 2

regards Gepa


new ktm bikes modules have bugs

[bigkey]

tm100 will do G keys
Do you mean tm100 will clone G keys? or KeyMaker G keys? Thanks

[zhumerchant]

Can you help me, where can I find TK5551 and BMW EML transponders, thanks

[Recoder]

Can you help me, where can I find TK5551 and BMW EML transponders, thanks
Try 3dgroup uk.for tk5551

hth

[cjawahir]

Try 3dgroup uk.for tk5551

hth

that tk5551 chip wont work because its precoded for mira clone ,

try here http://www.codecard.lt/index.php?searchStr=tk5551&act=viewCat

cj

[obeids]

Hi guys....

Having issues with Cloning 4D keys on the TM100.
I put original key and it reads and decodes. Then I insert CN2 and it says " WRITE FAILED". Tried different chips and quite a few times. Always the same.
Used the same chips on EFFI and it cloned perfect.

Any Ideas???

BTW it was 4D67 for Toyota

[Siham]

Hello Gwee and Zhumerchant ,

When you will add or its already planified keymaker for VAG with BCM2 and for range rover 2008-2015 ?

Regards :)

[bigkey]

Hi guys....

Having issues with Cloning 4D keys on the TM100.
I put original key and it reads and decodes. Then I insert CN2 and it says " WRITE FAILED". Tried different chips and quite a few times. Always the same.
Used the same chips on EFFI and it cloned perfect.

Any Ideas???

BTW it was 4D67 for Toyota

I bought the cloner just to clone ID46, but tried over 10 cars and always "decode fail", some failed instantly, some failed after 5 minutes. Tech supports always refer to manuals or basic videos.
Quite frustrated, maybe its time to put it aside and wait for improvement. GO BACK TO TRS5000 and 468Keypro now

[parapilot]

Same mate, I have never managed to clone id46 successfully. Tried loads of cars.

Also 4d onto cn2 keep failing. Zedbull does them fine.

Whenever i ask if anyone has managed to do id46 I get no reply!!!

[cjawahir]

Same mate, I have never managed to clone id46 successfully. Tried loads of cars.

Also 4d onto cn2 keep failing. Zedbull does them fine.

Whenever i ask if anyone has managed to do id46 I get no reply!!!

no reply because i dont have the clone box yet , i have other tool and most times i program chip to car .

i am not sure if this can clone to tpx 4

will let u know as soon as i have it

cj

[simaservis1108]

Today try Ford Transit BCM.
Dump recognized OK.
Add key to dump not working.
Key not recognized,immo light flashing fast.

[cjawahir]

Today try Ford Transit BCM.
Dump recognized OK.
Add key to dump not working.
Key not recognized,immo light flashing fast.

was that 4d key / can u post dump

that vehicle is it possible to reset keys ?

no need to post dump i see other post
cj

[simaservis1108]

Classic Ford 4D63 except for the integrated remote.
It is not locked,except for PG3.
Should be reusable.

[bigkey]

Same mate, I have never managed to clone id46 successfully. Tried loads of cars.

Also 4d onto cn2 keep failing. Zedbull does them fine.

Whenever i ask if anyone has managed to do id46 I get no reply!!!

I tried to clone my daughter's Honda Euro 2006 key ID46 today. So many failed but get it at last.
Look like you need to TURN OFF the cloner after clear data, then TURN ON "fresh" before collecting data from car.
I tried three times all ok when follow OFF/ON procedure.
Not 100% sure if that is what made the different but will try again tomorrow on other cars and will report.

[neverquiet]

Has anyone tried to add key to dump for Volvo XC90 2004 and newer?
It needs to connect to the server to get the job done!

[obeids]

I haven't able to use the cloner still. So far all failed but Zedbull with EFFI works.

************************************************** ****************8

[cipijoint]

Can someone help me i got my TM100 damaged by FTDI ( its genuine) , some windows issue damaged the FTdi232RL , i need the USB EPT FILE read by MPROG from an TM100 original, so that i can rewrite my usb device ..

[cjawahir]

2015-7-21
V3.09 released
1. Add keymaker: China vehicle, Delphi Immobox, 93C66, ID48. Models: GreatWall Hover,Wingle,Voolex C10,C20,C30,V200,V240,X240, ZhongHua.
2. Bugs fix.

Notes:
EEPROM is 93C66B, SOT-23. You can read it by XProg using Microchip 93xx66B. The wire schematic from 6-PIN to 8-PIN can be got from
technical support.

[autocheck]

What's on v3.10 & v3.11
?

[PremierD]

More stuff ....just a guess though lol

[PremierD]

needed for latest SOT thingy lol lol

[zhumerchant]

Today try Ford Transit BCM.
Dump recognized OK.
Add key to dump not working.
Key not recognized,immo light flashing fast.
bugs will be fixed V3.13

[simaservis1108]

Also check Alfa Romeo 166 Immobox - Key from 93C56.

Also doesn't work.