***** TM100 (full) - geniune review*****

[datapage]

I no have free toyota free 3.22. how i can install free gifts Christmas?

[bigkey]

I no have free toyota free 3.22. how i can install free gifts Christmas?

Not quite sure if the standard procedure is applied to this free gift, but go to Tools --> Install New Modules --> It will do the rest
When completed go to Tools --> View Installed Modules --> The list should show 10: Toyota, Lexus

[bigkey]

Cloned an ID46 for Peugeot 407 yesterday. Cloned sussessful but wont start the car immo light still flashing on dash board

[manfred2]

Hello.
I update but did not see active module 10. Someone does it work?

[m-o-y]

send him your TM100 serial and then install new modules

[datapage]

To whom i send serial number?

[m-o-y]

I activated Toyota by sending my TM100 serial to flyobd
and then install new modules.
so you can send through skype or any there contact

[PremierD]

To whom is giving you the free gift I would surmise mate :)

[m-o-y]

auto diagnostic tool/Mary

[datapage]

Toyota not FREE.
garyflyobd.com
22:50 (more 9 hrs)


For me
Hi dear




Toyota---110usd




By PayPal---116usd

[m-o-y]

Christmas Promotion ---FLY Company

Promotion 1: Order TM100 base ------450usd
1: free Toyota
2: free CAS4
3: free CSA4+
4: free Porsche
5: free 46/ 4D cloner

Promotion 2: Any TM100 old user:
CAS4 /CAS4+ and Porsche -----only 100usd


Promotion 3: Any TM100 old users :
Toyota is free to be activated

Promotion 3: Any TM100 old users :
Nissan + 20-digital PIN code caculator---50usd

http://flyobd.com/tm100-en.htm

The E-shop website : http://www.uecutool.com/

Mary’s Aliexpress shop: http://www.aliexpress.com/store/1184214

the company’s website : http://flyobd.com/fvdi-en.htm

but it is only for Christmas , that mean it is end

[Nikola1309]

toyota is free for old users, i update mine yesterday for free,just contact them on skype.

[datapage]

More than 1300 (+ A B C D series )people will have to send a private message ?? for skype? madness. If it was free for all, it should be automatically.

[PremierD]

So its not even worth you paying attention and contacting them ... ? you need spoon fed this as well ?

[mostafali]

Any one try to activate TM100 today, is there any issue with activation server??

[PremierD]

Its The holidays you .............. :)

[fadhle]

toyota is free only for Christmas promotion
[5:11:01 AM] auto diagnostic tool/Mary: you can enjoy the promotion price
[5:11:11 AM] auto diagnostic tool/Mary: but now the promotion is over

[shitad]

Any more news on 48 cloning

[philipcoin]

today try to program mazda 2 eprom 93c86
cannot find on tm100 saw mazda 6 have same eprom but cannot regconice.

thank you.

[cjawahir]

today try to program mazda 2 eprom 93c86
cannot find on tm100 saw mazda 6 have same eprom but cannot regconice.

thank you.

immo not in dash but in bcm glove box area, same as demio Mazda .

cj

[philipcoin]

immo not in dash but in bcm glove box area, same as demio Mazda .

cj


Effi recognize file in May be module 60 immo in ecu.

Please can send you file and check.

[cjawahir]

Effi recognize file in May be module 60 immo in ecu.

Please can send you file and check.

your ecu like the one on effi module 63 ?

did u get the car to start ?

is the car euro model or JDM ?

CJ

[philipcoin]

yes module 63 eprom 93c86
But effi cannot program key it says wrong data.

Car is Japan.
I remove ecu but yet immo light flash on cluster.
Please I check glove box did not see immo box

Where is it located please.

[cjawahir]

yes module 63 eprom 93c86
But effi cannot program key it says wrong data.

Car is Japan.
I remove ecu but yet immo light flash on cluster.
Please I check glove box did not see immo box

Where is it located please.

REMOVE glove box and plastic skin then u see it .

cj

[PremierD]

lol lol lol .... ...............:top:

[philipcoin]

REMOVE glove box and plastic skin then u see it .

cj


thank you will check
what is the eprom in the immo
and give feed back.

[cjawahir]

thank you will check
what is the eprom in the immo
and give feed back.

9s12 mask 1L15Y

CJ

[siyadk]

does tm100 have unlocking feature for Jeep,chrysler keys similar like tango?? can anyone update me on this

[philipcoin]

Not sure my friend
May next update .

Pc

[obdsystems]

Any more news on 48 cloning

It can't even do 46 cloning lol
Please somebody else tell me I'm wrong (please do!)


There are professional tools already available for 48 cloning - check threads

[parapilot]

no mate, iv had 2 cloners of them for id46, org, and the new 'replacement' never got either to work. load of rubbish. tried many different ways.

[bigkey]

It does work ... and ... it does not work.
When it works, beautiful as the carbon chip is cheap and can fit into most remotes.
But when it not works, not thing but frustration;
That's why if it doesn't work after 2 tries I use something else.

[souss]

hi members,

i have a problem with original tm100 from fly,
my problem is when i connect my tm100 i have a message connection with serve failed,
i change the usb cable and re install driver but i have the same problem,
have you issue for this problem?

Thank you!

[m-o-y]

yes this msg received when you work offline ,
but machine will work good in online or offline.

[cjawahir]

hi members,

i have a problem with original tm100 from fly,
my problem is when i connect my tm100 i have a message connection with serve failed,
i change the usb cable and re install driver but i have the same problem,
have you issue for this problem?

Thank you!

sometimes u will see this problem , its server problem .

some function will not work without server , cal cs bytes will not work .

cj

[bigkey]

hi members,

i have a problem with original tm100 from fly,
my problem is when i connect my tm100 i have a message connection with serve failed,
i change the usb cable and re install driver but i have the same problem,
have you issue for this problem?

Thank you!

I always receive this message when my laptop is not connect to internet.

[souss]

thank you for all, for your reply, so the problem comes from fly server!

[philipcoin]

today try to program mazda 2 eprom 93c86
cannot find on tm100 saw mazda 6 have same eprom but cannot regconice.

thank you.

hello mate
car start running tm100 program key successfully
i use ford fiasta on tm100 to program mazda 2
immo is in ecu

thank you.

[cjawahir]

hello mate
car start running tm100 program key successfully
i use ford fiasta on tm100 to program mazda 2
immo is in ecu

thank you.

ford fiesta with 86 chip is in engine ecu , can u post the dump u got in the instrument cluster /

cj

[philipcoin]

mate
did not read dump from cluster
because there is no immo in cluster is in ecu ford fiesta and ford ka
have similiar ecu of use ford fiesta use 4d 63 and ford ka 4c with same eprom number can check will post ford ka and fiesta dump here.
so you test.

thank you
regards

pc.



[QUOTE=cjawahir;2684670]ford fiesta with 86 chip is in engine ecu , can u post the dump u got in the instrument cluster /

[trinicolin]

Is it necessary to get CN 900 or any other cloner once you got the TM 100?

[totoo]

V3.22 released

1. Add keymaker for Porsche Cayenne, Cayman, Macan as MY2014. Parts: BCM, IC: 9S12XEP100, Transponder: PCF7953.
2. Add keymaker for Ford Focus as MY2014. Parts: PCM, IC: 95320, Transponder: TIRIS DST80.
3. Add keymaker for Iveco Daily as MY2012. IC: 95640, Transponder: Hitag2.
4. Add function: make VAG dealer key by 7-byte CS.
5. Add function: edit ID46 IDE(GMT46, TPX4, CN3).

How to make VAG dealer key by 7-byte CS:
1. Select TPReader, click "MEGAMOS 48", click button "Dealer key by 7-byte CS"
2. Input 7-byte component security, select brand, put new key into coil
3. Click button "Make dealer key".

How to edit ID46 IDE:
1. Select TPReader, click "PCF7936"
2. Input 4-byte IDE at P0, click button "Write".

[totoo]

2015-12-2

V3.24 released

1. Add function: disable key at keymaker for new model Porsche
2. Add function: explorer key at keymaker for new model Porsche
3. Fix bug: reading UMACFG of PCF7953

[totoo]

2016-1-19

V3.26 released

1. Add keymaker for Nissan TEANA as MY2012. Parts: BCM, IC: Freescale 9S12, Transponder: PCF7952.
2. Add keymaker for Chevrolet Captiva, Silverado as MY2011. Parts: Immobilizer Box, IC: Freescale 9S08, Transponder: PCF7936.
3. Add keymaker for Mitsubishi L200, ASX, Mirage. Parts: EATCS, IC: EEPROM 25320, Transponder: PCF7936.
4. Fix bug: Dodge Dakota dump unknown version.
5. Add function for BMW CAS4+ save ISK.
6. Improve online activation procedure. Activation only within 10 days remain.

How to save ISK for BMW:
Select keymaker for BMW CAS4+ adding key. After original key decoded, TM100 will save 16-byte ISK for you. If the same car lost
all keys, you can use the saved ISK to do all key lost without reading ISK from DME.

[lidons]

Key add a VW Passat 3C, and only added me ID46 transponder, the Remote could not be added. what is the procedure for it.

This car uses hitag key ID46.

[cyrixcard]

Does TM100 have feature to reset Toyota H /4D by OBDII like tango. Tango use vag Kline cable and this is good to save time removing dash to bring IMMO out. This will be great option if added

[cjawahir]

Does TM100 have feature to reset Toyota H /4D by OBDII like tango. Tango use vag Kline cable and this is good to save time removing dash to bring IMMO out. This will be great option if added

tango have that h via obd really ?

cj

[PremierD]

lol lol lol .............

[whiskeyman]

Does TM100 have feature to reset Toyota H /4D by OBDII like tango. Tango use vag Kline cable and this is good to save time removing dash to bring IMMO out. This will be great option if added

this i would like to see in action:)

reading the immo by obd with tango

[Atex31]

Do you want me to video the next one?

It's always had the Toyota OBD with Tango Toyota never tried it on an H system yet.

[whiskeyman]

would like to see if it does these H keys

[lidons]

major flaw found in TM100.
MODULE. 7936 hitag2 key ID46 with proximity to VW Passat.
Chinese keys come with a CN3 within them, if you do it by the key module is recorded in the dumps and start OK.
but to activate by OBD2 to operate the remote, continues to give it high for diagnosis to be a CN3. and left out of programming. Unable program for OBD.
VW also works hitag unlock --- but only with transponder CN3 ok.
with PCF7936 is not unlocked, leave message (Not Found).
reviewing with FVDI, CN3 if the transponder is preloaded with 7bit. But it is not blocked and neither is blocked by OBD.
CN3 is not valid for diagnosis.
7936 Virgin putting a transponder on the key and encoding for dumps with TM100, this does NOT perform well preload 7byt CS, and yes blocked,

with FVDI, you can not either, and preloading tagkeytool entering the key, and then try to register for OBD.

[lidons]

CN3 - add transponder by Dumps (tm 100) and it works ok.
CN3 - can not give high by OBD --- (just dumps) - (this step is necessary to add remote later)because NOT (Locked)
Remote - can not register, (for it is necessary to record the keys for OBD)
Remote. This is not possible by dumps only for OBD. for this a PCF7936 is needed and NOT a CN3
7936- not preload the CS with TM100,
7936- is necessary to register for OBD. then the remote (keyless)

Unlock TM100 VW Hitaig d46 comfort
CN3 - ok
7936 - Unable to not recognize.

[obdsystems]

major flaw found in TM100.
MODULE. 7936 hitag2 key ID46 with proximity to VW Passat.
Chinese keys come with a CN3 within them, if you do it by the key module is recorded in the dumps and start OK.
but to activate by OBD2 to operate the remote, continues to give it high for diagnosis to be a CN3. and left out of programming. Unable program for OBD.
VW also works hitag unlock --- but only with transponder CN3 ok.
with PCF7936 is not unlocked, leave message (Not Found).
reviewing with FVDI, CN3 if the transponder is preloaded with 7bit. But it is not blocked and neither is blocked by OBD.
CN3 is not valid for diagnosis.
7936 Virgin putting a transponder on the key and encoding for dumps with TM100, this does NOT perform well preload 7byt CS, and yes blocked,

with FVDI, you can not either, and preloading tagkeytool entering the key, and then try to register for OBD.


thanks - is this the ID46 CC passat ?

- its rare but is out there

[philipcoin]

hello

today i have kia bongo with eprom 95080 in ecu all key lost
TM100 AND TANGOcannot recognize dump
but EFFI can recognize but back file is full of 0000

someone can check if dump is correct

with any tool


thanks
regards.

[rokibar]

tango accept your dump. there are two keys id 46

[philipcoin]

tango accept your dump. there are two keys id 46

thanks

i make key with tango.


TM100 need to fix this bug.

[philipcoin]

anyone test this function


How to edit ID46 IDE:
1. Select TPReader, click "PCF7936"；
2. Input 4-byte IDE at P0, click button "Write"；

[limpid]

When I try to connect and update tm100 I get Io error, I be sent it back to china ones it was brought back after two weeks went back to same IO error

[limpid]

Tm100 io error after update part 2 what could be responsible

[m-o-y]

I had this problem when I bought my Tm100 .
I actually solved it through hotair soldering . but not sure about the part which I resoldered
so , Firstly you need to connect with TM100 support team.

[limpid]

Pls how so I get connected to their support teem?
I ve sent it back to China once for repairs

[m-o-y]

easy to log there site {FLY} and find what you need

[limpid]

Thnx a lot m-o-y I just did the hotair soldering and it worked,
I think the EPROM was losing contact

[philipcoin]

TM100 cannot program hyundai immo in ecu eprom st95040.

fly need to fix this bug.

[souss]

hi Members,


I noticed that for some time the TM100 has no update, they have dropped this product ?

[PremierD]

No ..........................................:)

[souss]

Thank you for your answer:02.47-tranquillity:

[geka1111]

hello guys,i want to buy modules renault cars and opel for TM100 base,support not answer on email, how to pay via paypal?

[micromax]

like fvdi 2015
device copied, introduced a few amendments, and we have silence.
now we will see TM200 or TM2017, new box , new payment....

:congrats:

[zygzook]

chrysler, voyager not copy 46 can not read data from the ignition big sneeze !!!!

[ph0en1x]

Is on sale now. Look fly site, promotion till end of month.

[autoTkey]

Well, here goes again the same old/new version story.

(Only for old TM100 based version)

And what bugs me about this tool are not only the bugs, but also the time limited usability. You can use it for the period you pay and after that you need to pay again. That's worse than AVDI's AMS.

[keysmith]

In November I had the modules listed below on the left activated, today it shows no modules activated. I am trying to read a BMW CAS3 dump and its says now I need to buy module #9. Where did the modules go?

[cjawahir]

In November I had the modules listed below on the left activated, today it shows no modules activated. I am trying to read a BMW CAS3 dump and its says now I need to buy module #9. Where did the modules go?

very strange , did u contact fly ?

cj

[keysmith]

very strange , did u contact fly ?

cj

not yet, thought it might be a common issue someone else ran into

[philipcoin]

In November I had the modules listed below on the left activated, today it shows no modules activated. I am trying to read a BMW CAS3 dump and its says now I need to buy module #9. Where did the modules go?



BMW CAS 3 is free connect your TM100 to internet
and use again.

[daniersms]

BMW CAS 3 is free connect your TM100 to internet
and use again.

Yes and it works well

[keysmith]

In November I had the modules listed below on the left activated, today it shows no modules activated. I am trying to read a BMW CAS3 dump and its says now I need to buy module #9. Where did the modules go?

Fixed it myself, uninstalled TM100, installed 3.16 then upgraded to 3.26, modules are back :biggrin:

[jnand]

Just wondering where the hell is Sir Gwee these days. I woudnt have invested in this tool, had I not read his post(s) in this thread. Now I have "immo loc." in a language that only 1.x billion people can read and understand, in the whole world. Sadly, I am not in the 1.x billion group. Is this enough reason for me to stop buying fly products? I should never have listened to Gwee.

[obeids]

Hi there

I paid now for Nissan module on TM100. However I tried 2 different Nissan Vehicles and it doesn't make the transponder correctly and corrupts the eeprom dump :(

The one vehicle is a NISSAN NAVARA 2010+ and the other Nissan Xtrail 2010+. Both using the same type BCM with the 9s12 chip.

Can somebody get them to fix this bug ASAP

[tunertool]

Can you fix reading id13, such a simple function is not working!?

[philipcoin]

Can you fix reading id13, such a simple function is not working!?

you mean tm100 cannot read id13?

[daniersms]

Yes just checked mine now and also not reading ID13 =--- surprise

[philipcoin]

just read id13 for fiat

[PremierD]

also not reading ID13 =--- surprise.....just read id13 for fiat even more surprised now mate ..... :)

[whiskeyman]

Just wondering where the hell is Sir Gwee these days. I woudnt have invested in this tool, had I not read his post(s) in this thread. Now I have "immo loc." in a language that only 1.x billion people can read and understand, in the whole world. Sadly, I am not in the 1.x billion group. Is this enough reason for me to stop buying fly products? I should never have listened to Gwee.

it aint gwee that makes this tool
hes not here now to defend himself ,so i will speak up for him
complain to those that make this tool

many here on DK tried to help fly
and there arrogance pissed people off (gary was big culprit)
So you need to look at the root of the problem


tm100 project will be dead shortly
what happens once the server goes down ?
box is another door stop
like all fly products once it has reached its peak they look for next money spinner

i for one ,will not waste another penny on any of there products in the future

[totoo]

it aint gwee that makes this tool
hes not here now to defend himself ,so i will speak up for him
complain to those that make this tool

many here on DK tried to help fly
and there arrogance pissed people off (gary was big culprit)
So you need to look at the root of the problem


tm100 project will be dead shortly
what happens once the server goes down ?
box is another door stop
like all fly products once it has reached its peak they look for next money spinner

i for one ,will not waste another penny on any of there products in the future


----------------------------------------------------------------------------------------

TM 100 is not a copy tool ,TM100 is a tool with independent intellectual property rights.

TM 100 will be free update for ever . not dead for ever.

TM100 server is running well , for ever.

do not worry.

[jnand]

What is the point if important features of the tool eg immobilizer locations are in Chinese.

[autoTkey]

----------------------------------------------------------------------------------------

TM 100 is not a copy tool ,TM100 is a tool with independent intellectual property rights.

TM 100 will be free update for ever . not dead for ever.

TM100 server is running well , for ever.

do not worry.

We worry - TM100 is time limited. You buy it and use it for some months until the license expires and then you need to buy it again... This is nonsense!

[totoo]

We worry - TM100 is time limited. You buy it and use it for some months until the license expires and then you need to buy it again... This is nonsense!


you can buy tm 100 base and some other modules together. or tm 100 full Unlimited.

NO license expires.

[autoTkey]

It's written on FLY website....

[whiskeyman]

----------------------------------------------------------------------------------------

TM 100 is not a copy tool ,TM100 is a tool with independent intellectual property rights.

TM 100 will be free update for ever . not dead for ever.

TM100 server is running well , for ever.

do not worry.

not a copy tool".............really?
have a look at tango
and tell me if not a copy
Fvdi from fly not a copy?

dont try tell us lies

[PremierD]

OK .. lets just have a cup of tea ..

[zygzook]

badziewie ja wszystko z chin piszą że robi a zatrzymuje sie to w kiblu

[Siham]

ONLY English here dude.!!! :)

[PremierD]

badziewie ja wszystko z chin piszą że robi a zatrzymuje sie to w kiblu


"crap I write everything from China was doing and stops it in the toilet"...... Where you will be soon i think mate .:)

[gmb45]

"crap I write everything from China was doing and stops it in the toilet"...... Where you will be soon i think mate .:)lol.............

[philipcoin]

hello,

anyone use tm100 to program key for cas4 and cas 4+

does it ok with no problem.

[bigkey]

Really? I am not aware of that. You will have to check in every 30 days but dont think you have to pay again.


Well, here goes again the same old/new version story.


And what bugs me about this tool are not only the bugs, but also the time limited usability. You can use it for the period you pay and after that you need to pay again. That's worse than AVDI's AMS.

[bigkey]

Sorry to hear you guy having problem with 46 cloning, but the 46 cloner works good for me, as long as I use CN3. Occasionlly I have to use other device and TPX4, but that's rare
no mate, iv had 2 cloners of them for id46, org, and the new 'replacement' never got either to work. load of rubbish. tried many different ways.

[keysmith]

Sorry to hear you guy having problem with 46 cloning, but the 46 cloner works good for me, as long as I use CN3. Occasionlly I have to use other device and TPX4, but that's rare

Have you ever succeesfully done a Chrysler? I have never been able to clone an ID46 Chrysler with CN3 or TPX4. Other people have said the same thing in this thread.

[totoo]

Really? I am not aware of that. You will have to check in every 30 days but dont think you have to pay again.

if you buy Tm 100 base, you can use forever , if you buy tm 100 full Unlimited, you can use forever. no time limited.

[totoo]

hello,

anyone use tm100 to program key for cas4 and cas 4+

does it ok with no problem.

ok, no problem.

[micromax]

if you buy Tm 100 base, you can use forever , if you buy tm 100 full Unlimited, you can use forever. no time limited.
when FLY turn off server, all tm100 is dead after 30 days.

[cjawahir]

when FLY turn off server, all tm100 is dead after 30 days.

i notice that my xp pro not update the days , but w7 its working .

what system your using /

cj

[PremierD]

when FLY turn off server, all tm100 is dead after 30 days.

The very same thing will happen If AVDI .. and all the other overpriced tools turn off their servers mate .. :)

Your point is??

[totoo]

Server is very stable , do not worry.

[micromax]

The very same thing will happen If AVDI .. and all the other overpriced tools turn off their servers mate .. :)

Your point is??

yes its very dangerous. if the company goes bankrupt, or is something else this device around the world will cease to act. not only fly, another devices too, xprog, carprog, avdi...

[PremierD]

Correct ... so no need to just single out Fly then :)

[westlock]

Add keymaker:SAAB, 93C66, ID46. Models: since MY2003, 9-3, 9-5, Twice

Has anyone done a key for a 05 saab 93 will it work with tm100

thanks for any info

[autocheck]

tryed it but didn't work , checked the file and it was all zeros

Sent from my SM-G350E using Tapatalk

[parapilot]

93 ID46 works fine. used it 5/6 times.

[souss]

hi members,

I have the TM100 we now cover for 1 year , and yesterday when I plug it into my computer , I have 3 beep , the green light turns on but the red does not light , the problem is that I even lost my modules I bought in fly , someone already had this problem ?

thank's to all for your help.

[PremierD]

Have you contacted Fly ?......

[souss]

no, but I contacted them tomorrow

[PremierD]

:top:..............................

[totoo]

2016-4-12 V3.28 released：
1. Add keymaker for China vehicle Siemens immobox. Parts: Immobox, IC: 93C56, Transponder: HITAG2；
2. Add keymaker for Changfeng Liebao. IC: STM8AF5288;
3. Bugs fix;


Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating；

[twalters]

Really sick of this tool. I have to plug it in and do the online activation before booking jobs in as like today 3 booked in for tomorrow but tm100 is suddenly deactivated and no help available from my uk supplier. Great when it works but just too intermittent. Cant download latest software either .

[PremierD]

no you don't mate .. plug it in once a month .. and it stays activated ... just the days count down . no biggy :)

[Siham]

Hi Mates ,

Does Tm100 give the option to insert the ISN manually like Tango for cas3 ++ ?

Thank you :)

[totoo]

Hi Mates ,

Does Tm100 give the option to insert the ISN manually like Tango for cas3 ++ ?

Thank you :)

Tm100 give the option to insert the ISN manually like Tango for cas4+ , not cas 3+ .

[Siham]

Hi totoo ,
Wrong ,tango give the option for isn input for cas3+ .
For TM100 need the ecu dump so need to use ecu programmers ,with tango just need to read ism with other tool by obd.. :)

BR :)

[bigkey]

Hi totoo, is there anyway I can download the older TM100 version?
I remember clone id46 sucess 100% with one older version (not sure which one), but after updates it is kind of hit & miss





NO???

[totoo]

Hi totoo, is there anyway I can download the older TM100 version?
I remember clone id46 sucess 100% with one older version (not sure which one), but after updates it is kind of hit & miss
NO???


yes ,contact me by Skype please.

[zygzook]

nissan jucke nats 6 clone 46 faul, file ok start

[obeids]

Hi there Guys.

Having some problem with TM100. Some modules seem to be faulty. I have attached the Eeprom files for you guys to see if works on your system or not. Can FLY engineers please resolve these issues !

1) VW Golf 4 Motometer - When open 93C56 it says wrong version. This same file works fine on VVDI and other tools.
2) VW Golf 4 Motometer - Open file for 24C02 to show pin but shows incorrect pin. Same file work and shows correct pin on other programs.
3) Nissan Navara 9S12 2010 + - When make a 7936 transponder it locks the chip, and gives out a corrupted eeprom file to write back to Immo.
4) Nissan X-Trail 9S12 2010 + - When make a 7936 transponder it locks the chip, and gives out a corrupted eeprom file to write back to Immo.


Also since the last 2 updates the unit seems to be unstable. Sometimes you open 1 file and it again says Connecting to TM100 and suddenly for any module it will say PAYABLE MODULE - PLEASE CONTACT SUPPLIER.
Lastly is the proble of writing PCF7935. I noticed that for some unknown reason this machine takes about 5 times longer to write any PC7935. Example is BMW EWS keys. It takes about 5 minutes of writing and still many times transponder data is corrupted.

[autocheck]

Hi there Guys.

Having some problem with TM100. Some modules seem to be faulty. I have attached the Eeprom files for you guys to see if works on your system or not. Can FLY engineers please resolve these issues !

1) VW Golf 4 Motometer - When open 93C56 it says wrong version. This same file works fine on VVDI and other tools.
2) VW Golf 4 Motometer - Open file for 24C02 to show pin but shows incorrect pin. Same file work and shows correct pin on other programs.
3) Nissan Navara 9S12 2010 + - When make a 7936 transponder it locks the chip, and gives out a corrupted eeprom file to write back to Immo.
4) Nissan X-Trail 9S12 2010 + - When make a 7936 transponder it locks the chip, and gives out a corrupted eeprom file to write back to Immo.


Also since the last 2 updates the unit seems to be unstable. Sometimes you open 1 file and it again says Connecting to TM100 and suddenly for any module it will say PAYABLE MODULE - PLEASE CONTACT SUPPLIER.
Lastly is the proble of writing PCF7935. I noticed that for some unknown reason this machine takes about 5 times longer to write any PC7935. Example is BMW EWS keys. It takes about 5 minutes of writing and still many times transponder data is corrupted.
Thanks, that's true please the engineers work on that.

Sent from my A718 Xplora Plus using Tapatalk

[Recoder]

Hi there just to add my own problems.
When writing to chips or reading takes a really long time .
Also if its going to fail ie making id40 chip for opel from blank pcf 7935 it just says writing etc and just hangs .

Tried setting it up on different laptop etc everything just takes a very long time (Reading and Writing).

My version is basic with added modules 3.28.
Any help or advice appreciated .

[Rito]

I try today read Audi A5 smart key and it not detect... AVDI can detect it and show all if, Km etc.....

[cjawahir]

my tm100 goes to 0 days , contact support and miller said i need to send back unit by EMS , this will take about 6 weeks to go to china and return to me .

what i want to know is what dont work with the unit set now at 0 days ?

cj

[obeids]

Hi guys....

I just the Mercedes Module activated because I needed to make a Transponder for a Merc W168 series.
I loaded the file and it uses a PCF7935 and guess what it took between 8 to 10 minutes to write the transponder and still not working.
This is the longest I have seen any machine take to write to a PCF7935....... I could've copied a GB of data or more in that time. I am sure the PCF7935 doesn't even have 512kb of data space.
Surely there is a problem with the TM100 and PCF7935.

I am sending this info to the Fly engineer and request all guys to the guys to also report the fault to the engineers so that they can make an urgent update and fix this issue.

* PM poster for Skype details please !

Add these 2 skype names and report it to them and let's get them to fix this issues.

[philipcoin]

When you report problems on tm100 to their engineer they do not give you feedback and will not solve problems in the next update,

They have not solve any problem so far as i know ....

[bigkey]

When you report problems on tm100 to their engineer they do not give you feedback and will not solve problems in the next update,

They have not solve any problem so far as i know ....

Since GWEE went ... things getting worse... They may have got enough suckers (including M...E....)

More worry about other items that can generate more ... buck ...

[siyadk]

Sending back to china when activation days hits zero...thats unbelievable!! come on Fly... you have to better than this.. if this continues, you will be the worst tool ever

[philipcoin]

Not sure they have been following this thread mate
Because if they do.
Then tm100 will be good tool

They said tm100 better than tango
And yet tango is releasing good update

is almost 2yrs and they have not inprove

They just want to sell what they have and not help customers.

[koyot]

just throw your money
TM100 will never work the same as tango
e cloon china

[siyadk]

It doesn't need to work as tango 100%... Atleast half as tango would do.
I had couple of modules which tm100 didn't have asked Gary that I can share this module to tm100 . he was not even bothered ..
It seems they want to sell units as many as possible and not to develop it further

[Rito]

About Nissan 20 pin code calculator, how this work??

I have Nissan Qashqai try programe it but I not understand how calculator work.
Must use vin from car?

Thanks

[philipcoin]

About Nissan 20 pin code calculator, how this work??

I have Nissan Qashqai try programe it but I not understand how calculator work.
Must use vin from car?

Thanks


nissan 20digit pincode

it changes like outcode and incode
when you try programing and the outcode of 20didgit show on your screen you insert that outcode to tm100 and will give you incode

when you get 20digit outcode and you unplug your tool that outcode will change.

[kristikapa]

Add keymaker:SAAB, 93C66, ID46. Models: since MY2003, 9-3, 9-5, Twice

Has anyone done a key for a 05 saab 93 will it work with tm100

thanks for any info

It worked for me. Key added with succes.

[siyadk]

tm100 v3.26 clone is out... finger crossed, hope fly wont come up with new machine like they did for fvdi

[totoo]

my tm100 goes to 0 days , contact support and miller said i need to send back unit by EMS , this will take about 6 weeks to go to china and return to me .

what i want to know is what dont work with the unit set now at 0 days ?

cj

FLY closed some tm 100 test machines , because your tm 100 is test machine.

[daniersms]

FLY closed some tm 100 test machines , because your tm 100 is test machine.

Now did this people get hold of the test machines and how will we now?

[whiskeyman]

FLY closed some tm 100 test machines , because your tm 100 is test machine.


nice to see you found the guys info helpful to develope the tool
nice way of showing your appreciation
keep up the good work fly company:chuncky:

not much you can clone now

[nenadgorgi]

TM100 work partial not even near like tango but if you use TM100 like master tool in your workshop and don't have any backup tool than that is bad idea what you gonna say to your customer hey just wait couple of days because:
1 - my tool have BUGS
2 -fly server is off
3-My tool is just for testing and now dont work
for profesional work need org tool and one shot one kill (money pocket)

[micromax]

all tools from FLY its for beta testing, look on FVDI2015, bugs, bugs, bugs, we sends logs and wait, wait. counter go to 0 and tools go to trash.

[lidons]

to work with 7935 is an odyssey, long time.
7935 transponder reading for BMW, is all false.

[lylezim]

is this tool worth having thats probably all i would want to know from those who already have it...

[siyadk]

i honestly suggest you to wait, or if you extra money in pocket, buy tango. Because currently tm100 is a joke, no serious updates and not fixing reported bugs. If they sort it all out, then buy tm100 , else dont buy. I hope they will listen and start working

[p1et]

I really don't understand why bother byuing this crap copy when you have original with basic software which does really lot of cars for 1100 USD. It is not much money for so much capabilities which work 100% and it's constantly updating.

[zygzook]

Chinese engineers have ***** eyes that not all can comprehend, because not all can see and figure out and copy, and have everything sucks but good price

[cjawahir]

bro i am not here to bad talk Chinese people , or say every thing from china is crapp , just some people really dont care what u think about them its all about money .

there is a way Tm100 can run with out internet connection , my tm 100 was deactivated was beeping 2 times , now i have it working again .

cj

[zygzook]

alfabet morsa

[siyadk]

takes more than a minute to detect and read 4D 67 chip...really unimpressive... Fly, if you are listening , please solve this, else you wont last long in this market

apologies for low res video, but you will get the idea

https://www.youtube.com/watch?v=BQWQWQyO3r4

[lidons]

Toyota RAV4 - 2003+ 4D. it does not work, (No master key, not used) -1
EFFI Mod 117, Andriu - OK. +1

[PremierD]

2016-5-9

V3.30 released

1. Add Toyota/Subaru smart key reset function.
2. Bugs fix.

How to reset smart key for Toyota/Subaru:
1. Select Tools, Unlocker, Toyota, Reset smart key.
2. Click button reset.


Try that then .. see if it helps

[Atex31]

Same day that Tango gets updated with the same functions too. :hmmmm2:

[PremierD]

It have bugs as well ? :hmmmm2:.....lol

[Atex31]

Hopefully not,

They do usually test it on actual vehicles before releasing to the unwashed masses. ;)

[Rito]

Today I try read key Audi A5 and it not show info... ( think it can read VIN + KM )
Not detect tranponder...... But key start car....

[siyadk]

2016-5-9

V3.30 released

1. Add Toyota/Subaru smart key reset function.
2. Bugs fix.

How to reset smart key for Toyota/Subaru:
1. Select Tools, Unlocker, Toyota, Reset smart key.
2. Click button reset.


Try that then .. see if it helps


This update deserve a clap for fly company...
Atleast they heard to the customer demand
or
A perfect reply for the 3.26 clone recently released. looks like for time being, clone is a s**ker

[siyadk]

update: toyota smart remote is payable module
no big surprises there..

[PremierD]

update: toyota smart remote is payable module
no big surprises there..


You go to the store for a case of beer ... you pay? or you get it for ~~~~ all ... ? wake up mate.:)

[totoo]

TM 100 new module Reset of Toyota/Lexus/Subaru Smart Keys 40,80,128 bit.

374575374576

[cjawahir]

TM 100 new module Reset of Toyota/Lexus/Subaru Smart Keys 40,80,128 bit.

374575374576

first next time upload a better pic , where in the software did u see 128 bit type key ?

cj

[siyadk]

ok here is review for toyota smart key reset..

did around 10 keys today. all worked fine except two(could be because of bad key)

really impressed.. however takes long time as compared Tango(yes i have done many in tango). However i wont complain

[siyadk]

however little strange and confusion with price for module.. Fly sent skype and email saying 50$ for toyota reset module. However when contacted gary, he needed 63 $ (60 for module and 3 for paypal)

reason he said is, price went up!!! probably a lot inflation going on there:stung:

[siyadk]

You go to the store for a case of beer ... you pay? or you get it for ~~~~ all ... ? wake up mate.:)

not if you programmed a key for beer store owner for free... I get my daily beers that way:excitement::excitement:.

[siyadk]

first next time upload a better pic , where in the software did u see 128 bit type key ?

cj

A small update info:
unfortunately no DST 128 key unlock in this module yet. I tried this module with DSt 128 keys as well, but fails

[totoo]

A small update info:
unfortunately no DST 128 key unlock in this module yet. I tried this module with DSt 128 keys as well, but fails


DST 128 key unlock will be updated next version.

[Siham]

Will you also add G chips image generator ?
Also it is possible to add possibility to insert manually ISN for CAS3+++ without having to read ecu dump ??

Thank you !

[totoo]

2016-5-12 V3.32 released：
1. Add Toyota/Subaru smart key TMS37200 reset function；


How to reset smart key for Toyota/Subaru:
1.Select Tools, Unlocker, Toyota, Reset smart key；
2.Click button reset；


Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating；

================================================== =====================



DST 128 key unlock is updated today.

[PremierD]

A small update info:
unfortunately no DST 128 key unlock in this module yet. I tried this module with DSt 128 keys as well, but fails


.................................................b etter now ?

[Siham]

Dear Totoo , it is possible sometimes to get an answer from your side ?
Just one answer will be fine mate :)

Thank you :)

[PremierD]

:hmmmm:........................................... .

[Siham]

.....:hopelessness:

[obeids]

Is it only me that has issue writing PCF7935 with the TM100 or are there other guys too?
It takes extremely long to write and then too the data is corrupted.

Another problem is the VW Golf 4 Motometer Cluster. It doesn't read the 93C56 eeprom and says " Unknown version" and the 24c02 it gives wrong pin. Both these files work perfect on other units such as VVDI etc.

[rapidroman]

if this device does for you , the more you how to do it

[micromax]

it's just good advice

price is similar...

[PremierD]

Then give the advice when its asked for mate ... :)

[rapidroman]

does not comment on electronics , never earn my maintenance

[PremierD]

Mate ... wtf are you on about ...????



A może lepiej powiedzieć .. Co chcesz odpowiedzieć ???

[rapidroman]

quietly boss

[Johnner]

Oh dear ! :eek:

[rapidroman]

TM100 even near the tango did not happen , is it practical

[PremierD]

Cant be arsed with this ... goodbye

[siyadk]

:rock::rock::rock::rock:
.................................................b etter now ?

[autocheck]

What's new on v3. 34

Sent from my A718 Xplora Plus using Tapatalk

[totoo]

2016-5-14 V3.34 released：
1. Bugs fixed for ZhongHua and DiHao Siemens immo program,Code 93c56, use ID46 chip；
2. Fixed a problem with Siemens generated special chip；

[datapage]

Fiat has not upgrade, very old soft.
VW not correct crc eeprom med17 ME17 edc17

[PremierD]

Moan ,moan ....moan ..............................lol

[whiskeyman]

I used mine to hold me solder iron today

was well pleased:stung:

[philipcoin]

2016-5-14 V3.34 released：
1. Bugs fixed for ZhongHua and DiHao Siemens immo program,Code 93c56, use ID46 chip；
2. Fixed a problem with Siemens generated special chip；


hi

have you fix kia and honda
getz eprom 95040 -chip id46

[totoo]

if your tm 100 is full version unlimited , one set FLY OBD Terminator fulll unlimited for you free.

[Recoder]

Very dissapointed in my tm100 not full but have added module .
Does not do what it says on tin .
Cant even update now to 3.34 stuck on 3.28 just hangs when i try to update .
Thoughts anyobody please .

[siyadk]

Very dissapointed in my tm100 not full but have added module .
Does not do what it says on tin .
Cant even update now to 3.34 stuck on 3.28 just hangs when i try to update .
Thoughts anyobody please .

i had similar issue when i using it on Windows 10 . When tried windows xp, then there was no hanging and updated completely without hanging. MAybe this could be your solution

[Recoder]

i had similar issue when i using it on Windows 10 . When tried windows xp, then there was no hanging and updated completely without hanging. MAybe this could be your solution

I tried it on another machine im running xp on both .
After lots of trying managed to get it to update .
Still not happy with transponder writing speed etc .
Shame really looked very promising .
Glad i didnt buy full version .
Just my thoughts and observations .

[siyadk]

I tried it on another machine im running xp on both .
After lots of trying managed to get it to update .
Still not happy with transponder writing speed etc .
Shame really looked very promising .
Glad i didnt buy full version .
Just my thoughts and observations .


glad i would help...You are right, the writing and reading speed is terrible but i think it can be fixed with any update, because this issue was not there in much earlier versions, so i think a simple update would fix the solution

[jnand]

I tried it on another machine im running xp on both .
After lots of trying managed to get it to update .
Still not happy with transponder writing speed etc .
Shame really looked very promising .
Glad i didnt buy full version .
Just my thoughts and observations .

Most of us were conned into buying it by Gwee, who is no where to be seen now. I missed out on a lot of money because half the time it does not work correctly or takes forever to execute. I have fixed all those problems now, and more. I bought a tango.

[paul_12345]

Most of us were conned into buying it by Gwee, who is no where to be seen now. I missed out on a lot of money because half the time it does not work correctly or takes forever to execute. I have fixed all those problems now, and more. I bought a tango.

No one was conned into buying it as gwee didn't lie... I for one raised the issue that fly can not be trusted and also posted that gwee was too influenced by fly giving him free equipment.. your own choice and your own fault.... also gwee is banned hence he is no where to be seen.

[whiskeyman]

Most of us were conned into buying it by Gwee, who is no where to be seen now. I missed out on a lot of money because half the time it does not work correctly or takes forever to execute. I have fixed all those problems now, and more. I bought a tango.

Gwee was good member and friend of mine
dId gwee sell you the device?
i think not
He and a few member here had small input to the device
till fly cut them off
notice fly has influence on site here
Learn facts first

[Johnner]

Gwee was good member and friend of mine
dId gwee sell you the device?
i think not
He and a few member here had small input to the device
till fly cut them off
notice fly has influence on site here
Learn facts first



Would you care to explain to everyone here mate,where they have this alleged influence ? :hmmmm:

If not..I would respectfully request you refrain from making such inflammatory,ill informed statements...

Thank you...

[whiskeyman]

refrain i shall:02.47-tranquillity:

[jnand]

Gwee was good member and friend of mine
dId gwee sell you the device?
i think not
He and a few member here had small input to the device
till fly cut them off
notice fly has influence on site here
Learn facts first

Gwee did not sell me the equipment, however, the input he had on the evaluation of the device on this site was by no means "small", contrary to what you say. And, coming from such a high profile locksmith, us newbies believed every word he said. I am not aware of the influence fly co. has on DK. Tell me more. The only way forward for me from here is legit stuff only.

[siyadk]

lets behind the past and move forward. Tm100 can be a better tool if fly can listen to our complaints and issues. See how excellent is vvdi and samic customer support for their customer.
I suggest we all stay together as one and keep asking fly for bug fix till the point they cant ignore us more

united we stand, divided we fall!!!

[Recoder]

No one was conned into buying it as gwee didn't lie... I for one raised the issue that fly can not be trusted and also posted that gwee was too influenced by fly giving him free equipment.. your own choice and your own fault.... also gwee is banned hence he is no where to be seen.
Thanks for your observations and thoughts .
You are 100% right we had a choice .
I did study as much as i could on device and in the end thought it would a good choice but tango would have been better im sure .
But as said with a bit of tweeking and playing this item could of made the grade .

Maybe too much being crammed into small processor (Maybe tm200 on way ;-)

[rodrigonicolas]

Hi, I have a problem with original TM100, when I try to update, get

Firmware update failed
TM100 IO error

Please someone could help me.

[datapage]

I bought bell cost $ 1.
I told the salesman that crap.
Seller said but only costs $ 1 ...

[paul_12345]

Maybe too much being crammed into small processor (Maybe tm200 on way ;-)

Nothing to do with the processor.. its got a pretty powerful chip.. have you seen tmpro's hardware.

[Recoder]

Nothing to do with the processor.. its got a pretty powerful chip.. have you seen tmpro's hardware.

As it happens i havent looked inside my TMpro but i do belive it is not crammed full goodies so point taken .

Its just a shame TM100 is so slow and buggy .
maybe its better on some Vehicle makes than others (The reason for this sticky to find out?).

[siyadk]

has anyone been able to perform activation. My activation counter is at 19 days now. It doesnt activate while opening the tm100 software and i tired all ways for last one week( yes , computer is connected to internet)

[totoo]

Hi, I have a problem with original TM100, when I try to update, get

Firmware update failed
TM100 IO error

Please someone could help me.


your tm 100 is bad , return it to factory and repair it please.

[totoo]

As it happens i havent looked inside my TMpro but i do belive it is not crammed full goodies so point taken .

Its just a shame TM100 is so slow and buggy .
maybe its better on some Vehicle makes than others (The reason for this sticky to find out?).


Tm pro 2 is very very very difficult to crack. maybe you can crack it .haha

[PremierD]

has anyone been able to perform activation. My activation counter is at 19 days now. It doesnt activate while opening the tm100 software and i tired all ways for last one week( yes , computer is connected to internet)

I think that it has been changed to activate only when it gets to 10 days or less ..then it goes up to 29 days :)

Check your updates .. it tells you just that .. somwhere


2016-1-19


V3.26 released

1. Add keymaker for Nissan TEANA as MY2012. Parts: BCM, IC: Freescale 9S12, Transponder: PCF7952.
2. Add keymaker for Chevrolet Captiva, Silverado as MY2011. Parts: Immobilizer Box, IC: Freescale 9S08, Transponder: PCF7936.
3. Add keymaker for Mitsubishi L200, ASX, Mirage. Parts: EATCS, IC: EEPROM 25320, Transponder: PCF7936.
4. Fix bug: Dodge Dakota dump unknown version.
5. Add function for BMW CAS4+ save ISK.
6. Improve online activation procedure. Activation only within 10 days remain

[Recoder]

Maybe i could crack it .HA HA
Maybe not?.
But thats not the point i dont claim to do somthing and dont Ha ha .

Bogi done a good job whatever anybody thinks same as TM100 good job so far *****Almost *****.
Thats why i bought it on its potential and prior testing by members .

This message is done without predjudice or Malice


Tm pro 2 is very very very difficult to crack. maybe you can crack it .haha

[paul_12345]

Tm pro 2 is very very very difficult to crack. maybe you can crack it .haha

You mean tmpro is very hard to reverse engineer i.e. to reverse it so that you can extract the algo from it to add to tm100.

It can't be that hard to just clone it.

[obdsystems]

Chrysler 300C 2008+

Writes chip but file doesn't seem updated. Disappointing

[obdsystems]

My thought for tonight: u can have this clever crap, but ultimately still better off with genuine Tango
PS. No clever comment pls admin - It still has bugs mate after all this time

[philipcros1]

sierra improved pleystacion1

sierra improved pleystacion1

[philipcros1]

if someone sells something , let them write the truth , and the truth lies in the center of the country , such as doing v / v overbroad

[philipcros1]

his device is a moderator I can annoy

[Johnner]

Mate,another member of staff has already canned you for the same sh**e you're spouting on about here...

Goodbye...again :banghead:

[obdsystems]

2nd job the same - doesn't write back to file the written chip.
Contacted support - this is ridiculous. it's un-usable

Will give feedback

[datapage]

feedback china= after purchase = I don’t understand = I will consult my engineer =... . tu . . . . tuuu . . tuuuuuuuuuu . but the price is good . and accessible to the people.

[Siham]

2nd job the same - doesn't write back to file the written chip.
Contacted support - this is ridiculous. it's un-usable

Will give feedback

How many % of module are ok with TM100 ?

[parapilot]

My experiance 70-80% of key modules. Not including cloning etc which is terrible

[m-o-y]

Two times tried to write Pcf7935 from Bsi 106 with failed and msg write protection.

[siyadk]

TOTOO:
Are you listening. Please help us out. We need a solid confirmation from you that fly will sort the bugs out. Please hear us, your customers!!. Please reply for above bugs

If you are going to ignore us, I can assure you that your tm100 wont stand too long in the market

[Siham]

TOTOO:
Are you listening. Please help us out. We need a solid confirmation from you that fly will sort the bugs out. Please hear us, your customers!!. Please reply for above bugs

If you are going to ignore us, I can assure you that your tm100 wont stand too long in the market


My Dear Mate ,

Fly ,Gary and all other staff from this company DO NOT CARE about customers ,they will care about customers only when they try to sell or promote new products, they absolutely do not give a ~~~~ about customers .
Why customers have to beg for bug fix when it in the interest of the conpany to fix those bugs .
Do not expect to much from them ,also where is Zhumerchant ?
Its sad to see a company that have potential and beheave like this .

With all respects ,Best regards :)

[micromax]

the fly the company only cares about its own interests - earn money to maintain - as they wrote themselves.
all users is betatesters.

[zhumerchant]

Two times tried to write Pcf7935 from Bsi 106 with failed and msg write protection.
did you use blank PCF7935? otherwise TM100 will give message "write protect".

[zhumerchant]

what modules not work? please tell me by skpe with dump file.

[zhumerchant]

there is no device without bugs.
if you find a bug in your device, you became a betatester?
if so, you have become a betatester when you were born.

[zhumerchant]

the fly the company only cares about its own interests - earn money to maintain - as they wrote themselves.
all users is betatesters.
there is no device without bugs.
if you find a bug in your device, you became a betatester?
if so, you have become a betatester when you were born.

[autocheck]

there is no device without bugs.
if you find a bug in your device, you became a betatester?
if so, you have become a betatester when you were born.
What's your Skype name?

Sent from my A718 Xplora Plus using Tapatalk

[PremierD]

What's your Skype name?

Sent from my A718 Xplora Plus using Tapatalk

Open your eyes mate .............

[autocheck]

Thanks

Sent from my A718 Xplora Plus using Tapatalk

[lidons]

Nissan micra K12 EEp95080 - 7946 + remote ok :)
Fvdi - tagkeytool (NOTE- 95080)- NOT Found

[PremierD]

Nissan micra K12 EEp95080 - 7946 + remote ok :)
Fvdi - tagkeytool (NOTE- 95080)- NOT Found


***** TM100 (full) - geniune review*****...... It says ~~~~ all about fvdi at the top of this thread mate ...............:)

[Siham]

there is no device without bugs.
if you find a bug in your device, you became a betatester?
if so, you have become a betatester when you were born.

Yes you are right there is no device without bugs! :)
But devellopers of others companies try to fix those bugs and do not wait month to fix it .But yes of course somes big company that make powerfull tool sometimes do not care about bugs fix.
You can get exemple from : Xhorse -Autohex-Truecode and many others that REALLY care about customers problems and software/hardware problems or bugs.
Zhumerchant its also long times that we didn't got you here ....... quite 1 year,your last post here was from 23 july 2015 it was when TM100 have v 3.13 .
Also if you take the time to read some post ahead you will now what bugs still have TM100 .
Personally I am very glad to see that you are back ,hope you will sort out those bugs.

Good luck Buddy :)

[m-o-y]

did you use blank PCF7935? otherwise TM100 will give message "write protect".
Yes , it is Blank PCF7935.

[siyadk]

Zhummerchant.. thank you god you showed up.. please donot disappear again. we wanna makes this tool good, if not the best. For this please listen to your customers and fix bugs, atleast one by one. If you show that courtesy, i am sure you will earn goodwill from DK members

My suggestion no:1 - please fix reading and writing speed of chips of tm100. It takes more than a minute to read simple 4d60 chip. Earlier version did it less than 10 secs. So i am sure this is a bug issue

Atlast not the least, Zhummerchannt, your appearance back to DK is a promising one and please dont disappoint us again.

[lidons]

imagen generator ID46 7936 Renault Master Phase2 -> Not Found -> Transponder leave it locked and unusable

[philipcoin]

Hello mates ,

I need tm100 3.34 software someone can upload it here

Thanks
Regards

PC..

[zhumerchant]

imagen generator ID46 7936 Renault Master Phase2 -> Not Found -> Transponder leave it locked and unusable

Sorry for the bug. The bug will be fixed at Ver:3.36.
Please contact with technical support, will unlock the transponder for you.

[lidons]

Sorry for the bug. The bug will be fixed at Ver:3.36.
Please contact with technical support, will unlock the transponder for you.

you can pass me the (IKS- high and low) and I unlock it.
- Or TM100 can restore option 7936?:)

[obdsystems]

Sorry for the bug. The bug will be fixed at Ver:3.36.
Please contact with technical support, will unlock the transponder for you.


and fix the Chrysler 2008+ 300C bug plz

[zhumerchant]

you can pass me the (IKS- high and low) and I unlock it.
- Or TM100 can restore option 7936?:)
At version V3.34, TM100 wrote wrong crypto key. ISK low: 4F4E4D49, ISK high: 4B52.
You can use it to unlock.

[siyadk]

At version V3.34, TM100 wrote wrong crypto key. ISK low: 4F4E4D49, ISK high: 4B52.
You can use it to unlock.

:congrats:
good job zhunnerchannt. Now you start to get my respect. Keep up this good work