tool for keys programming

[blackfox2007]

i need a tool for programming the keys, witch one is the best and almost use .

[super jumbe]

You will need more then one tool depends how serious you want to get into the key business and the combination can cost you well over 20K...

[blackfox2007]

thinks super jumbe for your replay.
i need a tool can programme europeen car keys, and i don't wich one is usefull for this task .

[drakov]

What tools do you have now and what is your planned budget

[blackfox2007]

i'm a beginner and i'am collecting some information about the keys making tools, my buget is around 1000$

[m3touk85]

You need t300, x100+, clone zedbull
Xprog , clone fvdi

After that you will need professional tools in future

[vlado kljucar]

for that money, on your place i will buy tango, soldering station and xprog,upausb,

and if you want to work trough obd ,for that money you can buy only clones, like already @super jumbe sayed for serious tools u will need over 20k...

or maybe buy now on promotion orig abritus and step by step when u have money buy softwares for key programming :)

[electromech]

You need t300, x100+, clone zedbull
Xprog , clone fvdi

After that you will need professional tools in future

Agree but the Clone FVDI is riddled with problems is it not a waste of money at this point or could you enlighten me and say it is worth the troubles?

[blackfox2007]

Thinks for your help

[blackfox2007]

On youtube i see some key programmer on obd and usb used with computer application

[antonypaul]

AD or SBB original you can happy with you key job need some good programming tool and transponder

[estate]

Programming them is only half the battle...........

[electronistul21]

first you need learning electronic.ist better to start with radiodecode,after key programing.need know what ist one dump,what ist hexa and another.

[wktan]

G'day members,
I bought a 2010 mondeo 2.0L TDCI (NZ) about one year ago. Only provided with one key. Managed to get a key cut in UK. Bought a 4D clonable transponder (EH2) and a 4D clone king from aliexpress. Managed to clone chip and it works. However the EH2 chip is hidden under the ignition switch because it cannot be accommodated inside the key. It can hold a TPX2 transponder chip. Anyone out there have any knowledge whether TPX2 can be cloned using 4D clone king?

[electronistul21]

for what reason you wish cloned key? is better programing in to car.in this case you erase lost key.

[wktan]

Ford Mondeo required two original keys before you can program a third key. Reprogramming a key by dealer in NZ will be quite expensive. It is very much cheaper for me to get the key cut in UK and send to me in NZ. I bought the 4D clone king and 4D transponder EH2 to copy the key. It has been working fine the past one year.

[electronistul21]

now i understend.you not have device for programing key.for ford ist better use VCM2 (need outcode-incode ) for programing.you have raison,when programing single key to ford,engine not cranck.

[wktan]

Yes I do not possess a key programming device and have no intention to buy one at the moment because it is a one off job. I did the key cut and copy because it costs less than half I will have to get the key cut and copy by dealer in NZ. Moreover I am afraid that programming device might mess up the whole system and render the car useless.

[Catdaddyfunk]

So no go on skp900?

[didi_du_93000]

For 1000$.

Zed bull clone with effi software 200$
Xprog M 100$
renault nissan keyprogtool tool (clone of truecode) 100$
Autocom diagnostic for learn key by obd. 80$
TM100 with some option 500$


You will can make more than 60% of European park with this set and with less than 1000$.

Good luck!!!

BUT DON'T FORGET YOU WILL DON'T BECOME "PROFFESIONAL LOCKSMITH"

And you haven't cutter, decoder-reader-pick, transponder stock, key stock...

Right price is 40 000$.


With Tapatalk

[janushaan]

SBB china clone works good,,
CK100 is good tool for cheap

[SKYTON]

You need t300, x100+, clone zedbull
Xprog , clone fvdi

After that you will need professional tools in future
right mate

[geeroam]

You got first tool right computer and join DK lol:burnout:learn how to solder, identify transponders, and be prepared for many sleepless nights,

[dadal]

and be prepared for many sleepless nights, I know this one very well,,most important investment

[speedy100]

Hi there!
Am i missing something or what?
Who would ever invest 20.000 or 40.000 USD. for just cutting keys???
The equipment will be worthless way before it pays back its value. Not talking about making profit for the owner before that...
Even if You cut keys all day this will not work business wise!
Unless cutting keys is paid like gold in Your country... not in mine though... :(

Best Regards

[lanrceds]

a lots of tool can support all key lost ,OBDSTAR X100 PRO is the best excellent among their,eazy use ,cheap price