Johnson Control BSI flash

[jacostanzo]

Hello,

I have a BSI from peugeot partner, after ren pin code with a chinese tool flash was kill. Want to recover write new flash but I can identify what processor use this BSI, please in attach picture from BSI.
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317652&stc=1317653
Also I read eeprom somebody can give pin code please?

[Siham]

Did it with FVDI ? FVDI fly or clone ?
If its the case , connect battery charger an you car battery and retry the procedure ,flash is not corrupted its the BSI that is in boot mode.
Tried on 2 peugeot 308 with BSI jonhson and it worked but tooked 50 min .

[PremierD]

If you require it the Pin is 76GB mate

[helmi reguig]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=317658&stc=1
-------------------------------------------

[PremierD]

AVDI to read a pin mate ... :roflmao: .. a bit of overkill don't you think . lol

[jacostanzo]

Did it with FVDI ? FVDI fly or clone ?
If its the case , connect battery charger an you car battery and retry the procedure ,flash is not corrupted its the BSI that is in boot mode.
Tried on 2 peugeot 308 with BSI jonhson and it worked but tooked 50 min .

Was with FVDI, i will try this procedure. Thanks

[DashProg]

Send your bsi ref please

[kari11]

Did it with FVDI ? FVDI fly or clone ?
If its the case , connect battery charger an you car battery and retry the procedure ,flash is not corrupted its the BSI that is in boot mode.
Tried on 2 peugeot 308 with BSI jonhson and it worked but tooked 50 min .

Hello,

I've the same problem. I did the procedure, but it has not changed. Can anyone help?

Thanks
Kari

[stefyhgs]

Hello!!! Does anyone have a solution for this problem??? I just killed a JCI BSI on a 2011 partner, nothing works, I have 14,25 V on the supply tried to write km, or read pin, nothing brings it back to life, I can read the flash with the ecu flasher option on FVDI, but when trying to write it back I get checksum error. Please help!!

[stefyhgs]

Sorry is there any way to calculate the checksum of the file that I allready have and try to reflash it??? Or is there any chance to get another file?? BSI JCI 9666895580 Thank you!!!

[madzar]

Find your backup file.FVDI makes backup,then write it with SMOK psa tool or original AVDI.I had problem with Picaso stuck in boot mode .Smok tool solved in 20 min 100%.It is flash file.

[stefyhgs]

Sorry m8, but if I had the SMOK or the original AVDI I wouldn't find myself in this situation in trhe first place, don't you think? I've allready tryed to reflash the backup that FVDI made in the documents folder, but no joy because it had the "checksum error". In the end I managed to find a collection of berlingo flash dumps, chose the right one and flashed it with the same FVDI that killed the BSI in the first place, trough the "ECU Flasher" option and padabum, everything came back from the deads. I will upload the dumps for other helpless souls, with special thank's to Alexander74 that posted it in the first time. Hope this will be helpfull to anyone!!!

[reks13]

What version psa fvdi did you used for reflash?

[stefyhgs]

Sorry for the late reply. I used version 6.3 of the FVDI PSA Commander. Regards!!!

[ayet]

Sorry m8, but if I had the SMOK or the original AVDI I wouldn't find myself in this situation in trhe first place, don't you think? I've allready tryed to reflash the backup that FVDI made in the documents folder, but no joy because it had the "checksum error". In the end I managed to find a collection of berlingo flash dumps, chose the right one and flashed it with the same FVDI that killed the BSI in the first place, trough the "ECU Flasher" option and padabum, everything came back from the deads. I will upload the dumps for other helpless souls, with special thank's to Alexander74 that posted it in the first time. Hope this will be helpfull to anyone!!!


THANK YOU VERY MUCH

YOU SAVED MY DAY

[Talleresmalaga]

Sorry m8, but if I had the SMOK or the original AVDI I wouldn't find myself in this situation in trhe first place, don't you think? I've allready tryed to reflash the backup that FVDI made in the documents folder, but no joy because it had the "checksum error". In the end I managed to find a collection of berlingo flash dumps, chose the right one and flashed it with the same FVDI that killed the BSI in the first place, trough the "ECU Flasher" option and padabum, everything came back from the deads. I will upload the dumps for other helpless souls, with special thank's to Alexander74 that posted it in the first time. Hope this will be helpfull to anyone!!!

Good afternoon, first of all Thanks for the files, same problem with a 2012 partner, corrupt flahs did not work, no charger, no 2 days giving read a pin, its file worked, but I had to learn BSI and do manual coding, I do not get Have windows work, or central locking, did you have this problem? can it be the case that it is berlingo and load them in partner?


Greetings and thanks

[doctore]

you have wrong flash

post original software signature:)

[Talleresmalaga]

you have wrong flash

post original software signature:)

Good evening, first of all Thanks for the answer, the problem that I can not find the flahs for this bsi, the only one I found is the one that passed the previous companion of citroen with the letters E2.C2, I got one from a similar client that varies those letters, but all the readings fvdi clone give error in the sum of verification, I pass the image with the data, in case someone had something


or if you know where I can look

Greetings and thanks

539453

[topclef]

here is flash with signature E2EC , try and report

[Talleresmalaga]

here is flash with signature E2EC , try and report



Thank you very much, tomorrow I check it and I tell you how it was


regards

[Talleresmalaga]

Good evening, here the result of the tests, load the dumps from obd2, unlike the other one, it does not ask me to match the BSI to the ECU, it ends the load OK, but it does not work without electric windows, fuel level, or oil level


I try to reload the flash from the BSI cloning option, it does not allow loading the file, fvdi declares that the file recorded in the bsi is more current


if they are compared, there is no difference just with the original, do you think of something, or can it be a problem to load the dumps from OBD and with the other Dumps loaded?

540639

New

540645


Greetings and thanks

[malguy]

I hope you back up your eeprom before you write flash. Use write flash not clone m8.

Regards,

[chafik4051]

hi
i have same problem in partner killed when try read pin code
please help me cheksum correction to reflash
best regards

[baygrozdan]

here you go, working flash and solution how to repair it with fvdi with connection on table. pass on pm.

Good luck :)

[chafik4051]

here you go, working flash and solution how to repair it with fvdi with connection on table. pass on pm.

Good luck :)
THANK YOU TESTED NOW KEY PROGRAMMED ENGINE START GREAT JOB

[chafik4051]

hi,
help me please correct checksum and pin code for BSI Citroen Berlingo B9 (https://www.digital-kaos.co.uk/forums/showthread.php/644723-Citroen-Berlingo-B9-bsi)

best regards

[chafik4051]

hi,
help me please correct checksum and pin code for BSI Citroen Berlingo B9 (https://www.digital-kaos.co.uk/forums/showthread.php/644723-Citroen-Berlingo-B9-bsi)

best regards
sorry wrong file posted

[chafik4051]

this is bsi file to corect checksum i find it in Abrites folder

[barho67]

here you go, working flash and solution how to repair it with fvdi with connection on table. pass on pm.

Good luck :)

can you send me pass? i try to send message but you need to erasse messagese in your inbox i cant send

[Munzhedzi]

Hi can anyone assist me with the flash, I killed the costomer bsi with fvdi while trying to read the pin, I know this is an old thread but anyone willing to assist? I need to flash this on the desk already got the fvdi pin out, tried the file on the psa folder didn't work, thanks in advance https://uploads.tapatalk-cdn.com/20200502/a002c0ef62cdf7e337193059eedeefec.jpghttps://uploads.tapatalk-cdn.com/20200502/56995f43f21be5d0d9890b5e48813995.jpg

Sent from my CLT-L09 using Tapatalk

[ricked]

@Munzhedzij your file

ask pass in PM only

[Munzhedzi]

Hi @ricked, thanks so much I need the the eeprom as well mine is corrupted 95128, can you please assist?

Sent from my CLT-L09 using Tapatalk

[ricked]

Hi @ricked, thanks so much I need the the eeprom as well mine is corrupted 95128, can you please assist?

Sent from my CLT-L09 using Tapatalk

dont have that, if possible make virgin

[Munzhedzi]

Sorry but clueless about that, how do I make virgin I read people talking about fff is that so?

Sent from my CLT-L09 using Tapatalk

[adjee]

here you go, working flash and solution how to repair it with fvdi with connection on table. pass on pm.

Good luck :)


hello,

please can i have password for the bsi solution.

thanks in advance and for sharing.

[lidons]

hello i need Flash (7D.29) from BSI-JC C4 picasso 2008
BSI04EV K04-00
it's possible ?

thanks

[lidons]

hello, this is the flash from the bad BSI JC 7d.29
can repair the Checksum?

[rafal]

hello i need Flash (7D.29) from BSI-JC C4 picasso 2008
BSI04EV K04-00
it's possible ?

thanks
here....................

[lidons]

ok thanks, i will try on monday and i will keep informed, is the flash checked?

[khayri]

:love-struck:PLS .........PASS

[tech_cz]

Why pass?

WBR, Marek

[wowa557]

I have the same problem with boot mode bsi. I have do following:
I use FVDI 2014, i go to special functions, bsi exchange (from OLD TO NEW).
I started to read the (killed) Bsi. In the end, the bsi goes on and i could use them normal. i have wonder me but they work again.

[amaiod amaiod]

hello i need Flash (5F.47) from BSI-JC C4 picasso 2007
BSI04EV K04-00

[rafal]

hello i need Flash (5F.47) from BSI-JC C4 picasso 2007
BSI04EV K04-00
.............................

[vladimir88]

Guys Help me please i need original flash Thanks

[soulnotsailed]

Hi guys! killed my bsi can't find
Software signature: BA90
I would appreciate your help.
CheckSumm Error :(
Hi guys! killed my bsi can't find Software signature: BA90I would appreciate your help

[soulnotsailed]

Hi guys! killed my bsi can't find
Software signature: BA90
I would appreciate your help.
CheckSumm Error :(
Hi guys! killed my bsi can't find Software signature: BA90I would appreciate your help



Help please, 5 day without a car :(
Help please, 5 day without a car :(

[soulnotsailed]

Help please, 5 day without a car :(
Help please, 5 day without a car :(
My Solution orig software signature: BA90

[Kamel76]

Salut à tous
Recherche dump flash bsi jci 04ev
Signature f3. E4
Merci daider

[rafal]

Salut à tous
Recherche dump flash bsi jci 04ev
Signature f3. E4
Merci daider

english please....................

[Kokosz88]

Please help. I wanted to read the pin with fvdi. The car does not show any signs of life at the moment.
I found a .bin file in the directory, can you have a look, is it okay?

Citroen C5 2010





Functional Plan No: 9664058780
Manufacturer: Johnson Controls
Functional Product No: 9666895680
Software Index: 05.02
Calibration Index: 00.00
Diagnostic Index: OR
Serial Number: 012910
Manufactoring Date: 10/8/2030
System: B0
Software edition: 11.51
Software signature: DB.5F
Software reference: 9677415680
Manufactoring Date2: 1E/8/2010
Programming Date: 30/10/2010
Reprogramming counter: 1

[Domingo1111]

gracias por estos archivos de flash , he tenido el mismo problema con el FVDI chino a leer BSI de una peugeot partner , espero que alguno de estos archivo me pueda valer

[brend]

Amigo.........ENGLISH!!!.........776471



gracias por estos archivos de flash , he tenido el mismo problema con el FVDI chino a leer BSI de una peugeot partner , espero que alguno de estos archivo me pueda valer

[gianni94]

ciao hello friends I tried with fvdi to pull out the pin from a c4 and I blocked the flash !!now i wrote another flash with different signature and i don't know how to find the original signature i tried to write but it gives error cheksum

[gianni94]

hello i need
signature jc_bsi_7d29

[tech_cz]

Here:

WBR, Marek

[gianni94]

now I have to program the old keys or make new keys

[gianni94]

tech_cz thank you so much but you tell me the procedure after rewriting the bsi, i also have lexia

[gianni94]

scusa ma ti chiedo se puoi riparare il mio flash originale

[gianni94]

maybe even the eeprom is messed up !!!!!
you tell me
thank you

[smario77]

hello,i killed my bsi with svci 2020,i found the file saved by abrites but saying checksum error. some help would be much appreciated

[rafal]

hello,i killed my bsi with svci 2020,i found the file saved by abrites but saying checksum error. some help would be much appreciated

Go to bsi by fvdi again and read signature of flash please

[fmod12]

Hello!!!! Could somebody help with sw. signature 78.cc???? (966405908002 citroen c5). Thank You!!!

[hrag]

YOU CAN FIND IN AVDI BACKUP FOLDER

[p1et]

here you go, working flash and solution how to repair it with fvdi with connection on table. pass on pm.

Good luck :)

Hello,

Can you share password? Thanks.

[Essen cars]

Hi, please I need the flash, I killed BSI with SVCI while trying to read the pin.
Peugeot 807 , 2010 Diesel
Software Signature AF4D
thanks in advance

[81zx]

Here AF.4D

[Essen cars]

Thanks for 81zx , now i need help , the car back to the original issue :
can someone here please check this dump if corrupted or not ?
I have ignition on , no start no crank , no communication with Engine ECU and ABS.
Read the Immo code on bench with SVCI from BSI not succeed , read the eeprom with VVDI Prog ok , but I don’t know if the dump ok or not.
I hope if you can help me
thanks in advance

[Essen cars]

Here is the eeprom 95128 Original

[marina_rv]

Here is the eeprom 95128 Original

vin = VF3EBRHHAAZxxxxxx
pin = 5xxF or Fxx5
distance = 239xxx

[Essen cars]

Thank you, i have the VIN number and the PIN , but is this dump correct or corrupted ?

[sofyantitoun]

Good morning i have a problem with peugeot 308 2012 bsi Johnson controls E2EC

[rafal]

Good morning i have a problem with peugeot 308 2012 bsi Johnson controls E2EC

and?
explain what you need.........................

[brend]

and?
explain what you need.........................

Look like flash trable..... .







Good morning i have a problem with peugeot 308 2012 bsi Johnson controls E2EC


Hi.

Here good one flash ..............

[sofyantitoun]

Thank you for the help brend
But I have to ask one more question can i fix it with fvdi without removing it from the car or i have to do it on the table hope you answer me

[sofyantitoun]

Look like flash trable..... .









Hi.

Here good one flash ..............964018

Thank you for the help brend
But I have to ask one more question can i fix it with fvdi without removing it from the car or i have to do it on the table hope you answer

[brend]

Thank you for the help brend
But I have to ask one more question can i fix it with fvdi without removing it from the car or i have to do it on the table hope you answer


Yes , you can to do this without removing bsi from car .

If flash corrupted after read , bsi stay in boot mode .

Connecting and read id or samething you can't , ony write function work , no more .

[sofyantitoun]

thank you brend

[dasboard3]

hi
i need help citroen c8 jci bsi FLASH
9666895680 02
BSI04EV K04_00 090211
BOOT 2097777-1
212456701
V05..02
212454502
NS08033672
THANK YOU

[marina_rv]

hi
i need help citroen c8 jci bsi FLASH
9666895680 02
BSI04EV K04_00 090211
BOOT 2097777-1
212456701
V05..02
212454502
NS08033672
THANK YOU

send sygnature info or read 95128 i send to forum.

[dasboard3]

hi c8bsi eeprom

[dasboard3]

hi
problem solved new flash eeprom write smok uhds,mod win pin original writing svci program key svci car start,settings mod launch
all ok
(thanks button)

[karab]

Hello!
Another FVDI killed Johnson Controls BSI.
Does anybody have flash for it?

[rafal]

Hello!
Another FVDI killed Johnson Controls BSI.
Does anybody have flash for it?

bad quality of picture m8.........................

[karab]

OK!
Siganture is 77E8

[macinek102]

Use Search for the future :)

https://www.digital-kaos.co.uk/forums/showthread.php/717994-Please-i-need-flash-for-BSI-and-PIN-CODE-JCI_BSI_77E8-bin


https://www.digital-kaos.co.uk/forums/showthread.php/717994-Please-i-need-flash-for-BSI-and-PIN-CODE-JCI_BSI_77E8-bin

[karab]

Thanks macinek!
I should search more deeply!
I know there are different scenarios in this case.
I tried reflash BSI with the backup file that FVDI made itself in My Documents folder and car started.
Hope this will be helpful for others in my situation.

[hbfj]

Have someone flash for this signature ? JCI_BSI_3c0c ? I try to read pin from a citroen berlingo eletric ,but the avdi read the file with wrong checksum and cant write them. The car is dead :)

[sroka]

hello guys iam looking for 83.8E good flash thx

[sroka]

or my flash repair ?

[morgano]

hello guys iam looking for 83.8E good flash thx

Here it is.

Regards,

[dimet]

Hi

Need flash with signature jc_bsi_6936

[ricked]

Hi

Need flash with signature jc_bsi_6936

here is soft 69.36
remove boot part of the software if needed(io terminal file)

[dimet]

here is soft 69.36
remove boot part of the software if needed(io terminal file)

I don't have IO terminal. I have FVDI. Can I use the same file with FVDI?
Please send me password.

[dimet]

....................

[brend]

I don't have IO terminal. I have FVDI. Can I use the same file with FVDI?
Please send me password.

Yes , you can do this !

[ricked]

I don't have IO terminal. I have FVDI. Can I use the same file with FVDI?
Please send me password.

like i did say remove boot part and you will have same file as avdi

[dimet]

like i did say remove boot part and you will have same file as avdi

I don't know how to use your file. I have this file from fvdi backup but can't write because is checksum error. Some one can repair this file or give me good file?

[ricked]

I don't know how to use your file. I have this file from fvdi backup but can't write because is checksum error. Some one can repair this file or give me good file?

stop begging for this file as i did give it to you, i did say you need to edit mine to use it with avdi and it will work!!!

second option move data blocks from my file your yours, solved...

also why is your file from 2013??

edit

file .JCI_BSI_6936 CS fixed and adapted

[dimet]

This file is ok I use it with X-tool and with SMOK work good.

[cbarry]

Thank you, it went perfet for me. Thaaaaanks.