2014 Honda Civic Airbag issues, can you help,thanks

[KALNAJJAR01]

airbags module # 77960-TR0-A222-M1---95640

i have 2 cars were in accident, all parts were replaced new and used from same year car.

i did use:
1. carprog calculator-- result - U3000 internal failure of the srs unit

customer boought new srs module light is off.

2. used tachosoft - result- same U3000-49 internal failure of the srs unit

3. orange calculator same result C3913 and U3000-49

all three were failed.
i am attaching all files

any one has an idea or has 100% good and test file .
thanks for the help

can i just copy a good test file for honda and write it , is possible, do i need scan tool to calibrate or can not been done like that must compare only and do it manually.

thanksssssssssssssssssssssss

[KALNAJJAR01]

this is orange cleared same result

[repairmymodule]

There is an issue with these having HARDWARE failures after deployment.

Our good friend Anastudio1 can help you!

[badenaleks]

No HARDWARE
DATA SPC need rewrite !

[badenaleks]

need good foto !

[ctype02]

I have couple 2014 crv , civic and fit with the same issue

[Plcautoparts]

which one is the original file? and if you replace module with a good used one you might have to recalibrate the passenger seat (ODS)
Do you still have the car, i will try to clear it!

[KALNAJJAR01]

customer bought new module from Honda dealership for $400, no need to calibrate any thing, light disappear .
do not have the car, but all calculators failed to fix the crash

[mojomojo]

No HARDWARE
DATA SPC need rewrite !
Can you explain further. Seems to be a ever growing issue with these.

[FxShaw]

anastudio1...

http://www.ebay.com/itm/2013-2014-Honda-accord-SRS-fix-with-code-U3000-INTERNAL-FAILURE-OF-THE-SRS-UNIT-/221679518434?hash=item339d2102e2&vxp=mtr

[AVDIMON]

I have 3 modules with internal error. So, no body found solution yet? Is it really processor issue or it's hardware failure? I know that I tried to good working solution which was working just fine on another module. To this is hardware issue, not software.

[alex1g35]

I have run into a few of these problems myself. Anyone have a solution yet?

[HeXor]

I don't think anyone wants to share the info to fix it.

[sawatdee0999]

Most scanner do not have the Data information to give out the correct reading for the new honda's
i used the HDS and give me seat, but launch which same update give me module error.

If you get module error and that is the one thats left. Reprogram both he sws and opds it should go off.

[alex1g35]

Thank you so much! I could not believe it, but it worked! Sws had some interesting code that had to do with some programming problem. Did a calibration and light went off! You are a genius. Thanks again 😊

[ctype02]

So u3000 code can be fixed by calibrating sws and opds??

[sawatdee0999]

I've confirmed that U3000 isn't a correct reading of our scanner. But the HDS was picking up as Weight sensor reprogramming. Only for these type of Honda. Tested it on a few Honda over these past year's. HDS has something call ODS it programs both sws and opds together matching the codes by doing that the lights went off and stayed off.


Carprog fix is fine. just program the seat for both sws and opds. If you dont have a HDS, Program sws and opds by itself.

[alex1g35]

Hey guys, so a few days later, I get the same error "internal failure". SWS doesnt have a code, but when I do the seat calibration, light goes off for a few hours and then comes on again. I have a snap-on scanner and it only has the SWS menu, no opds. Do I have to do the opds calibration also? Im not sure what the problem can be..

[chemantha]

hey can u send me the dtc in ur srs module

[sawatdee0999]

you will have to do both calibration and how did you clear the light? alex1g35

[alex1g35]

So main airbag menu has a code "internal failure of srs module" I go to sws, do the programming, then go back into the airbag menu and clear the code and it goes away. And then it comes back. How can I do the opds calibration? Find someone with a different scanner?

[sawatdee0999]

that would be the case if you know anyone and how did you clear your file may you upload it?

[PierreTheron]

This tool is working for me to calibrate these ... on the later 2014 modules and at least gives the correct fault codes ....

Get two off them as the first one i got failed after few uses ...


http://www.gocardiag.com/vehicle-integrated-diagnostic-platform-p-378.html



Regards

[amlgarA]

U 3000, this module burn sometimes if crash sensor are damage, or over heat when airbag deploy, is a hardware issue,,, replace module... wont matter even write virgin data wont fix it,,

[ctype02]

Like someone was saying there is a way to fix by rewriting hardware data

[sawatdee0999]

I'll post my correct data for this and try it.

[alex1g35]

This is my clear file. I think its correct as I have done a lot of these civics. But please double check. Also included is the original crash file.

[janushaan]

This tool is working for me to calibrate these ... on the later 2014 modules and at least gives the correct fault codes ....

Get two off them as the first one i got failed after few uses ...


http://www.gocardiag.com/vehicle-integrated-diagnostic-platform-p-378.html



Regards

but do you mean first one failed after few uses,,

[sawatdee0999]

this is a 100% clear file for honda. which i have clear. just upload it into your module and your light will go off.


329088

[amlgarA]

:beer:WONT MATTER WHAT TO DO ,, EVEN USING VIRGIN FILE 95640 , doe snot work, maybe like the other guy says SPC560 DATA but I don't think so... if someone has solution, I have 20 modules replaced, WITH TR0 A013, A014, A212, A222, even some 2014 and 2015 FIT, I keep them ALL , ready to fix them....if someone has solution I wuld realy appreciate, I have all virgin files , for all those modules, I tried write oldone the same cODE u3000

[alex1g35]

ok so I reset the module yesterday. SRS had no codes, but sws had "wrong combination with the supplementary restraints system unit". I did the calibration and had to go back into the SRS and clear the codes even though there were none in that menu. Today in the morning the light went on again..

[Catdaddyfunk]

What code are you getting?

[alex1g35]

U3000-49 Internal failure of the SRS unit

[FxShaw]

Ahhh the infamous U3000-49 code lol...I was wondering how long it would take you to respond back saying it the same issue as before.


Get a new/used module.

[alex1g35]

So no one knows the fix for it? Will probably start looking for a used module.
But whats interesting is that the light goes off for a few hours, tried starting the car, turning it off, and driving it. And then it comes on randomly. Not sure whats going on..

[survivorp]

Was getting the code U3000-49, now it doesn't seem to come on. Not sure if i should replace the part or not :S

[PierreTheron]

Was getting the code U3000-49, now it doesn't seem to come on. Not sure if i should replace the part or not :S


Wait and see if the fault comes back again m8 ..

Only way to sum this thread up is ......

If you did a wrong read from module( voltage on programmer too high ) you might have problems with even the correct cleared file flashed to the Module ???
Or am i getting it wrong Here???

[amlgarA]

HOW YOU EXPLAIN 2015 fit, need rewrite RENESAS H8SX/1727, because there is not spc560p:joyman:

[Catdaddyfunk]

Was getting the code U3000-49, now it doesn't seem to come on. Not sure if i should replace the part or not :S

If it work then it works...if not then obviously you will need to replace it.

[Edvardas]

anybody know how to fix this problem?

[mojomojo]

Has the solution for this been revealed yet...i still looking around for a solution myself...

[slavax]

Just recently had this issue.
1. Cleared the crash data from 95640 and U3000 49 appeared with other codes.
2. Replaced Infineon chip, did not help.
3. Loaded VIRGIN file instead of clearing crash and re-calibrated the seat, Problem went away, SRS light was OFF. Drove around, tested OK.
4. Next morning started the car and the SRS light was ON again
5. Hoocked up the scanner and !!! No communication with the module, WTF???
6. Checked the ground, re-seated the harness connectors, NO COMM!
7. Threw the dam module into the trash can and ordered used one from a local parts dealer.

[gusta]

iam sure the problem is hardware issue on those module, because a guys on ebay fix them for 75 dlrs they must replace a capacitor o resistance from module circuit board

[borshch]

sorry whats "SPC" ?