Kawasaki ER6N 2014 with 93c66 micro eeprom

[baubynis]

Need help for Kawasaki ER6N 2014 with 93c66 micro eeprom
Original km 2215
Need 800km
Thanks320125

[baubynis]

will test it and inform ;)

[smartymarti]

Im thinking gwee,s file be be fine no point in testing it , it will work

[baubynis]

works good thanks

[baubynis]

Hi
Do you have some idea after change km on my kawasaki er6n .drive around 80km no problem,only no enymore memory on trip computer,after swith off ignition trip km resets.
And yesterday start the bike rmp stand around 4000rmp swith off igniton 3000rmp.speed is ok.
Drive around 15 km,leave bike for 1h ,then come back was normal like it must.
Today same problem drive 7km stop bike
Rmp on 3000.and still after 3hours same
Have some idea?


Sent from my iPhone using Tapatalk

[zckariya70]

Hi
Do you have some idea after change km on my kawasaki er6n .drive around 80km no problem,only no enymore memory on trip computer,after swith off ignition trip km resets.
And yesterday start the bike rmp stand around 4000rmp swith off igniton 3000rmp.speed is ok.
Drive around 15 km,leave bike for 1h ,then come back was normal like it must.
Today same problem drive 7km stop bike
Rmp on 3000.and still after 3hours same
Have some idea?


Sent from my iPhone using Tapatalk


write back ur orginal dump and cheack again

[baubynis]

With original like it was all OK
And trip komputer shows what it was before I take off battery.
Have some idea how to fix


Sent from my iPhone using Tapatalk

[baubynis]

Rmp ok
"Trip a "OK
"Trip b "(no memory )
Thanks


Sent from my iPhone using Tapatalk

[baubynis]

Everything OK
Drive around 400km no problem
And "trip B" have memory!
Thanks


Sent from my iPhone using Tapatalk

[Digiboy686]

Hello. I am new to all this. Can someone can point me where can i find correct info about mileage calculator or instructions on how to change correctly the eeprom data.

I brough the dash of kawasaki er6 2010 with 93e66 to some computer guy,who said he swapped the eeprom to new one(with the same file loaded) but my dash shows ----- instead of mileage and also fuel indicator dont show anything,also engine speed soes not show up. The orginal plan was to swap the chips myself,got the coder but soldering was so small that bring it to the professioanls. Dont know what he messed up,but now i am on my own. He made a backup of original chip(which i also have).

Please can you help me modify file (have 78.855 but need 50.200),but i have it in BIN format i evn dont know how to upload it.
Tell me how to do it myself?
Any ideas what he messd up(everything looks good and acuurate but panel works partly only.)

[Digiboy686]

Ok. i read how to upload file.

[frankrayk]

Your file is bad, read in 16bit.

[Digiboy686]

Ok. I will try to read it by myself. And thet come back.

[jomberykaso]

Good Luck!

[Digiboy686]

Finally get my ez2010 working. My bin files are only 1kb? what`s wrong?

Stupid. I am wrong. I tryd to use carxexedit com. But it shows i have only 62km and to NOT proceed further if its not correct.

[drpeter]

Finally get my ez2010 working. My bin files are only 1kb? what`s wrong?

Stupid. I am wrong. I tryd to use carxexedit com. But it shows i have only 62km and to NOT proceed further if its not correct.Because you uploaded a wrong dump, read as 16bit and try again :-).

[jomberykaso]

Or try my file posted.

[Digiboy686]

I am confused, i have so many chips to choose in dropdown in EZP that i select COMMON

[jomberykaso]

It seems to be your first job in this world.

[drpeter]

I am confused, i have so many chips to choose in dropdown in EZP that i select COMMONHere is your file...