2014+ VW 24c64 +NEC SW 0805 0905

[wiseman]

Has anyone had success on these Sw versions.

[javyb]

No cannot be done currently by any tool

[H2Deetoo]

Some older SW 0805 can be done, but newer SW 0805 are same as SW09xx and cannot be done :(

[wiseman]

Some older SW 0805 can be done, but newer SW 0805 are same as SW09xx and cannot be done :(

What tool managed the older version of 0805, it's 0805 I'm more interested in for now

[yugo45]

It is not matter what software you have it is production date .
Any cluster made after 06-2014 can not be done with any tool at moment.
I have cluster 07-2014 with software 0807 and it can not be done.
But I have done cluster with 07-2013 with software 0809.

[H2Deetoo]

Genuine Vagtacho supports older SW08xx

[ghostrider72]

Genuine Carprog as well. I have new cluster with this software on my table and cant read it. I can only read eeprom from the clip but not immo block. Crap hehe

[H2Deetoo]

Too bad :(

[batandball]

smelecom will read the miles on new version but wont change it

[chriskross]

Buy new cluster programm immo with and set new km with odis :-) job done

[H2Deetoo]

And what about used clusters then??

[ghostrider72]

Buy new cluster programm immo with and set new km with odis :-) job done

U cant program immo to it at the moment. There is no tool to do it.
I've asked VW in UK to code it and they failed. They read all the data from my clocks without a problem. Than fitted new clocks in and couldnt even connect ODIS to it. Clocks are brand new, unused however not provided by the dealer.

[chriskross]

lol when vw can't adapt it who then? change your vw dealer

[meteor80]

http://images.tapatalk-cdn.com/15/07/23/bfb8eae2c2feb877901a1071555f7bdb.jpg
Does someone know will Carprog read Immo in this cluster?

Wysłane z mojego Lenovo P780 przy użyciu Tapatalka

[H2Deetoo]

There is NO TOOL at this moment which can unlock (and read immo data from) these SW07xx clusters.


Rgs H2Deetoo

[meteor80]

Not good.

Wysłane z mojego Lenovo P780 przy użyciu Tapatalka

[ghostrider72]

705 is a bit different than the one from the first post. Plus it is made in February 2014 so should be ok. Cant remember from top of my head but im pretty sure car prob can handle it.

[H2Deetoo]

ghostrider72, you are wrong.
meteor80 is refering to a color cluster and from SW07xx and up NO tool supports it yet. I have 3 of them here now.
For black/white clusters it is SW08xx (new) and SW09xx which are not supported.


Regards,
H2Deetoo

[meteor80]

Yes it is colour cluster.

Wysłane z mojego Lenovo P780 przy użyciu Tapatalka

[ghostrider72]

ghostrider72, you are wrong.
meteor80 is refering to a color cluster and from SW07xx and up NO tool supports it yet. I have 3 of them here now.
For black/white clusters it is SW08xx (new) and SW09xx which are not supported.
H2Deetoo

You right mate. I just read SW nr, but not the part number hehe, my fault

[tunertool]

We made any progress on these yet ? I've got loads of them waiting...

[Wolfster]

We made any progress on these yet ? I've got loads of them waiting...

Hehe, we all have, when the SW is released you won't have so many ;-)

[ghostrider72]

carprog reads only up to SW05xx on colour clusters

[pimpin]

whell my JP programmer done this job by OBD2 so you dont need remove nathing of vehicle

[offsystem]

Jp programmer what is this?

[smartymarti]

whell my JP programmer done this job by OBD2 so you dont need remove nathing of vehicle

im not actually believeing this BO&*^ks

[teerak2uk]

Jp programmer what is this?
Jprog .

[smartymarti]

if its done vi j link then the chasis and immo data is also copied and then im thinking the car wont start and if you get around that the chasis is gonna look strange when it goes into the dealers

all in all bs

[offsystem]

The nec is locked reading is just possible by entering bootloader mode.

[javyb]

if its done vi j link then the chasis and immo data is also copied and then im thinking the car wont start and if you get around that the chasis is gonna look strange when it goes into the dealers

all in all bs
He's on about jprog 6 marti

[offsystem]

which NEC chip is this 70FXXXX360541

[exe123]

70F3426 it is locked. you cannot read it with programmer!

[junmab]

Elrasoft added the Renesas MCU.
Has any one tried it with VW or Skoda Octavia ?

[yugo45]

Elrasoft added the Renesas MCU.
Has any one tried it with VW or Skoda Octavia ?

All devices on market can read ONLY Unsecured MCU.

[koyot]

like this...........