PDA

View Full Version : Peugeot 307 immo problem



Maximilian1
23rd October, 2015, 09:44 PM
Hi guys
I have a problem with immo in peugeot 307 1.4 petrol 2003.
The car won't start.
Checked DTC and there is one: "permanent fault communication on data with the driving school ecu"
I read the ECU Sagem S2000 with KTAG but to me eprom 95080 dump is corrupted.
I can't read the VALEO BSI as I have only carprog and I'm not sure how to connect it without desoldering MC912dg128.
My diag tool LAUNCH cannot program immo without the pin.
Could you advise how to fix this.
337609

kizagt
23rd October, 2015, 09:54 PM
337611
try to read bsi, you need Lexia if you want to program bsi

mariazo84
23rd October, 2015, 10:46 PM
with carprog if you can read up photo BSI and BSI as connecting mostare

mariazo84
23rd October, 2015, 10:47 PM
reupload photo

Maximilian1
24th October, 2015, 07:59 AM
337611
try to read bsi, you need Lexia if you want to program bsi
WIll this wiring diagram work with carprog ? have anyone tried this ? I don't want to damage BSI.
Thanks

vasa
24th October, 2015, 08:41 AM
Sreach Google pin from VIN on France site coast 5 euro paypal. Is easy . You can try Carprog no fear reading.

bodzio012
24th October, 2015, 12:25 PM
Maximilian where are you from, maybe near me :)
Your launch maybe write keys but not more, but you need to planet or diagbox because you need to do configuration bsi.
Try read pin by the carprog and adapter a10

Maximilian1
25th October, 2015, 07:24 PM
Maximilian where are you from, maybe near me :)
Your launch maybe write keys but not more, but you need to planet or diagbox because you need to do configuration bsi.
Try read pin by the carprog and adapter a10

I was living there but now moved to UK :)
I think I have succeeded reading the bsi. Could anyone generate pin from bsi dump attached, please.

Thank you
337846

stoyanov
25th October, 2015, 07:35 PM
This dump looks like corrupted,no vin and pin inside.

Maximilian1
25th October, 2015, 07:47 PM
So what should I do now ? Should I load a virgin dump ?

bodzio012
25th October, 2015, 08:59 PM
Bin corrupted, write virgin

bodzio012
25th October, 2015, 09:08 PM
And read spi from ECU, tell type of engine, diesel , petrol?

Maximilian1
25th October, 2015, 11:22 PM
the car is peugeot 307 1.4 petrol 2003.
I have made the ECU dump using KTAG but the dump is corrupted too.
ECU is Sagem S2000

any ideas ?

337867