PDA

View Full Version : GM Tech 2 Suzuki


trinicolin
20th January, 2016, 07:15 PM
Hi folks. I bought a clone GM Tech 2 to be able to sync immo to ecu on a 2003 Vitara, but is getting error message. 353000

Can someone please tell me the next step.

Sent from my SAMSUNG-SM-N910A using Tapatalk
gokart
21st January, 2016, 12:08 AM
The next step is to buy a good camera because I see only a blured photo.
trinicolin
25th January, 2016, 02:39 PM
VALIDITY HAS EXPIRED DOWNLOAD LATEST DIAG SOFTWARE. current sw 01.120.020 Has anyone encountered this situation? Need help urgently.
Thanks

Sent from my SAMSUNG-SM-N910A using Tapatalk
trinicolin
27th January, 2016, 09:14 PM
The next step is to buy a good camera because I see only a blured photo.
So the message is revealed. What is your contribution apart from your photography advice

Sent from my SAMSUNG-SM-N910A using Tapatalk
Dawid
28th January, 2016, 10:17 PM
Check what date is set in your Tech tools options? Try to set 2004 year.
For sync immo to ecu you need password and pin code. Tech2 will ask you about password if you choose to register ECM. After password you need pin code
Try this password 890625
and pin code 0895
This should work with soft ver. 01.240.022
trinicolin
3rd February, 2016, 08:17 PM
A million thanks to you Dawid. That guidance solved that part of the problem but I am once again stumped with the in correct pin. The password went in nicely but invalid pin. 0895. This leads me to ask. Where can I get suzuki pin codes? Once again I need the assistance of DK. Thanks much.

Sent from my SAMSUNG-SM-N910A using Tapatalk
Bllinda
4th February, 2016, 12:51 AM
try .... .... 0408-0804-5244-0599 and report.
trinicolin
4th February, 2016, 01:28 AM
Thank Bllinda, would definitely try tomorrow and report. Sir!!!

Sent from my SAMSUNG-SM-N910A using Tapatalk
trinicolin
4th February, 2016, 04:11 PM
No luck with these codes. Even tried 7224-8008 6863 and the last four digit of the VIN 1265.

Sent from my SAMSUNG-SM-N910A using Tapatalk
trinicolin
4th February, 2016, 04:13 PM
Would it be easier at this stage to post ecu+immo+key data to get the proper dump?

Sent from my SAMSUNG-SM-N910A using Tapatalk
Bllinda
6th February, 2016, 11:30 AM
then it is not worth anything calculators.
ilhafi
11th February, 2016, 08:01 PM
hello what program you use for suzuki ?
trinicolin
12th February, 2016, 12:40 PM
Version 01.260.024

Sent from my SAMSUNG-SM-N910A using Tapatalk
trinicolin
13th February, 2016, 01:57 PM
did you get the link?

Sent from my SAMSUNG-SGH-I717 using Tapatalk
trinicolin
22nd February, 2016, 04:02 PM
thank you guys for your assistance. problems solved with pair of dump, just had to make key. Thanks Vasko!
bgd_ct
8th April, 2024, 01:35 PM
thank's worked great for me