CN900 mini news?

[sagutani]

this tool is awful. I dont recommend to buy it. and do you think they care?

Highly unrecommended! It's totally GARBAGE. Only on this thing in my life I find "UPDATE" means "RUIN". Even if they give people the device for free, they don't have rights to do that DECEIT.

[keysmith]

Highly unrecommended! It's totally GARBAGE. Only on this thing in my life I find "UPDATE" means "RUIN". Even if they give people the device for free, they don't have rights to do that DECEIT.

I've been running 1.13 for a month and I love this tool. If I never updated it again it would pay for itself 10x over. Going to unload my $1000 cloner soon. Sorry about your update problems but it's not indicative of other peoples experience. Like any Chinese tool, you don't buy it for customer support but for the features it provides at a low price.

[dimet]

Can I make a copy of the key for Mercedes A170 year 2000 ID33 7935?

[oleg68]

try use the T5 Id20 Chip

[keysmith]

Cloned a Fiat 500 today, CN3 wouldn't work but the TPX4 did.

Anybody have luck cloning ID46 keys to the Chinese 46C carbon chip?

[duplikeytor]

Cloned a Fiat 500 today, CN3 wouldn't work but the TPX4 did.

Anybody have luck cloning ID46 keys to the Chinese 46C carbon chip?

1.12 success rate 90%

[godfathertre]

from version 1.13 to 1.20.2.15. The latest version won't let me clone 4C to CN1 and 4D to CN2 i am afraid from latest version very little work hopefully the developer knows this and release a update to fix this i cannot believe release a update version without

testing tool copying capabilities .

[solitaire]

Cloned a Fiat 500 today, CN3 wouldn't work but the TPX4 did.

Anybody have luck cloning ID46 keys to the Chinese 46C carbon chip?
I always use CN3, no problem with this chips.

[dimet]

Cloned a Fiat 500 today, CN3 wouldn't work but the TPX4 did.

Anybody have luck cloning ID46 keys to the Chinese 46C carbon chip?

I use CN3 without problem.

[nikolat]

I have also used Cn3 without any problem. Any news, regarding CN 900 and ID48?

[P&D]

I have also used Cn3 without any problem. Any news, regarding CN 900 and ID48?

Don't think you will get ID48 copying with this machine......in the next few years if ever
if they cannot release updates without killing machine .....I would say not a chance for the ID48



from version 1.13 to 1.20.2.15. The latest version won't let me clone 4C to CN1 and 4D to CN2 i am afraid from latest version very little work hopefully the developer knows this and release a update to fix this i cannot believe release a update version without

testing tool copying capabilities .

Maybe thats there ploy kill them all so we have to buy again lol........as if we would..........You watch them bring something else out soon ;)

[keysmith]

1.12 CN3 success rate 90%


I always use CN3, no problem with this chips.


I use CN3 without problem.


I have also used Cn3 without any problem.

Ordered a second batch of CN3 chips, these ones work and read as "CN3". The other ones that failed read as "ID46 7936" but they where not made by NXP :hmpf:

[vanos batam]

doing G H chip fortuner Hilux thrue?

[godfathertre]

the problem is not 1.12 or 1.13 is is version 1.20 that little or nothing works keep version 1.12 or 1.13 do not update as the tool becomes useless and hopefully this will be fixed on next update please release new firmware to developer or a way to rollback to

1.13 to fix these issues .

[Weasel3]

Lockdoctor has this OBD add-on, on their homepage.
Can they confirm it works

[kevfield]

If lockdoctor has it on there website for sale i am 100% sure it will work ....

Thanks Kev

[godfathertre]

nothing works with version 1.20 with this tool you need to upgrade to this version for the addon obd to work and the company selling they have not tested soon you upgrade no 4c cloning or 4d cloning i would not buy till this is

fixed what is the point of doing toyota if the tool cant even copy 4c or 4d go ahead and buy and then tell us .

[ninja123]

just tested mine, id46 ok but all 4D not working since update :(

[solitaire]

I write email to *Removed Email Address..., ask firmware rollback to 1.13

I ask all users make the same.
thanks!

[Johnner]

C'mon mate...you know the routine here : Forum Rules (http://www.digital-kaos.co.uk/forums/showthread.php/2-Forum-Rules)

[solitaire]

I write email to *Removed Email Address..., ask firmware rollback to 1.13

I ask all users make the same.
thanks!
today get answer:


Cannotrollback，please buy new chip for your mini900, thankyou
Have a nice day

mini900 cn

[HeXeN]

What new chip this aliens talking about?

[solitaire]

I don't known

[solitaire]

today new update:
firmware 1.22.2.15

[godfathertre]

are you sure is version 1.22 . 2.15 just tried to update and says 1.20 2.15 is the latest firmware no need to update for mini cn900 and does your 4c and 4d copy works please release update to developer to fix 4c and 4d copying

as soon as possible do not update if you have version 1.13 otherwise the only thing that will work is id 46 copy .

[solitaire]

yes firware 1.22.2.15, MINI900 updater version 2.4
4D decoding successful, but can't write
4C can't write.

[godfathertre]

just wait hopefully there will be a update to fix these issues and do not ask the seller as they have not a clue and the will tell you porkies and have a good day as seller learn from us from this forum the do not test nothing they sell just look at the update tool

what a mess why cant they be able to write software that works and release updates this could be a cheap tool if fixed and supported from developer properly .

[Weasel3]

just wait hopefully there will be a update to fix these issues and do not ask the seller as they have not a clue and the will tell you porkies and have a good day as seller learn from us from this forum the do not test nothing they sell just look at the update tool

what a mess why cant they be able to write software that works and release updates this could be a cheap tool if fixed and supported from developer properly .


Many of the small CN sellers on Ali etc. Do use drop shipping. At least for the larger and expensive things.
And I do understand that.

The risk of having things in stock, which can be old and outdated quite fast is to high.
So it is obviously there is a lack of knowledge sometimes.

Many of the stores is held of women, with good sales and support. And also a friendly gesture.
(I prefer that. It means a lot to me. I think most of us feel the same).
(Or else there is a certain shop in Bulgaria with the opposite (male and very rude):). I don't need to say more. We all know who that is).


The CN women on Ali use the factory developer when they need extra assistance. But this is CN shops, and I agree it is not always easy to get the support you expect. It usually take some time to get things solved.
Better pay more then, buy locally and complain. And the poor bastard who sold you the goods, get all the mess.:) If your in a hurry, and want an easy cooperation with your supplier.

[bigkey]

That's a good news; I still have over 40 chip 46C left over from broken 486 device. Will try on 1.13 and report here

[bigkey]

Version 1.13 works beautiful for me.
For the price and what it can do is perfect for me.
Just my 2cents

[ucokseparoh]

What new chip this aliens talking about?


aliens... :biggrin::rofl:

[HeXeN]

So they will be changing chips every few months? It was the same story with JMD some time ago, after update id46 copy chip stopped working.
Is this some kind of "war" between MINI900 and CN900MINI ? The first one seems to get faster updates or higher firmware...

[autoTkey]

Last thing I heard both MINI900 and CN900MINI come from the same factory.

[oleg68]

CN900 mini received an update 1.23.2.15
he may determine the chip 8E and pcf7939

422216

[bbopel]

1.23.2.15 = Cn1 fail. Cn2 fail. Cn3 fail

Sent fra min D5803 via Tapatalk

[sv2hqx]

1.23.2.15 = Cn1 fail. Cn2 fail. Cn3 fail

Sent fra min D5803 via Tapatalk


knowing issue cn1
cn2 working
cn3 working
may you chips are not cn

[stivencho]

HI, Someone read SD cards from mini900. I need ver. 1.13.

[godfathertre]

update to 1.23. 2.15 4d copyng fixed 46 copy okay sorry cant test 4c has i have no chips to test so if you have version 1.20 update to this to fix this issues or if you have version 1.13 just keep this do not forget to say thank you.

[Weasel3]

For me.
Updating to 2.5 Sw on PC. Have some error.
It just bounces in a circle.
Download SW, shut down start up and download again the same 2.5.
If I use older SW it does not connect to web.
I have 1.22.2.15 from earlier. Trying to update to 1.23.2.15
Not possible to do further update on the tool because of this.

[solitaire]

Please someone uploade mini900 updater v 2.5
thanks

[Key Center]

Hi
If the program will update around, change the language to Chinese

[ninja123]

after latest update, still not copy 4D :(

[ucokseparoh]

brief report from Indonesia market in regards to CN TOYO..

~ Failed on Avanza G
~ Failed on 2008 Fortuner G

report is from my fb friends.

[godfathertre]

as i said in previous the developer of this tool need to check the updates on this machine and test that can copy after as been updated not worse than before the update software is a joke please stop buying this tool till all this issues are fixed also the 4 d copy

works on last update but you need to put cn chip near bottom of coil reader as is very weak what is the point of selling obd adaptor if these issues are not fixed yet with the mini cn900 .

[HeXeN]

all people of the world please flood tjecu email with negative opinions about this device.
and do not buy this s..t
click "?" button you will see email.

[ninja123]

click what ? ?
pm me email plz

[HeXeN]

when you open software updater there is "?" green button upper right corner. click it, there is tjecu email.

[solitaire]

note from aliexpress ys-01 chip:

424001

ps. CN5 copy work fine

[keysplus]

Emailed frustration hopefully fixed soon

[godfathertre]

the developer of this tool should be ashamed cant release a update that works and fixes the copy problems and the update tool is a joke if you have version 1,13 do not update and stop buying this tool till problems solved never mind the obd adptor

if cant copy 4c etc what is the point .

[ray-ray]

Time for everyone to post YouTube video on the failier of these tool. Once YouTube has been blasted with negative reviews and comments the end of tjecu. I don't have a mini but the same issue is going on with there CN900 as the updated link is dead.

[P&D]

look on the bright side ray-ray.......at least they work

[boskyluki]

Peugeot 206, 2004, encoding chip successful, chip cn3, version 1.12

[HeXeN]

ID13 copy to T5 FAILED :burnout:
DO NOT BUY THIS PIECE OF ...

[godfathertre]

the developer of this tool need to get a good look and try to fix those issue soon otherwise nobody will buy this tool only copy id 46 and 4d and the pick up coil is very quick why bring a addon obd if tool cant even copy not even 4c soon the xhorse vvdi key tool

will come out the will loose a lot of sales tjecu seems company do not care of customer problems update procedure is a joke and if you have 1.13 version do not upgrade at all and stop buying tool till these issues fixed or bring back a recovery to go back to 1.13

from latest firmware.

[Weasel3]

There has been the Chinese New Year.
The most important vacation/celebration, for CN people in the hole year.
All going back to their small village far away.
Most of them are back tomorrow at work.
So I guess their going the extra mile to solve things.
Now when the vacation is finished.

This is just small minor bugs, that will be solved.
As long as online update is available.
Cant just relay one tool. Need to have the big old one as well.
This is just the small fast one.
But I agree I think all the others companies get a tough competitor, with the new tool released (vvdi).

[key4man]

Hello friends
success to make lost keys for Toyota Corolla (G CHIP)with this device

[securipro38]

Hello friends
success to make lost keys for Toyota Corolla (G CHIP)with this device
HI can you tell us your version software please ?
Thanks

[key4man]

HI can you tell us your version software please ?
Thanks

version software 1.20.2.15

[strat]

I only temporary use this machine (CN900MINI) or as last resort cheaper chip for customer.. but noticed an update dated 2017 is it best is still stay on ver 1.13 ?

I do use it for 4C and 4D and 46.. reading comments here i think it's best I dont update ?

I also have the original CN900 not sure what version this is running but last time i powered it was over 1 year+ it's the original CN900 with a 4D cloner box is this also having these new problems with new chips etc.. or only the mini?

[solitaire]

last version can't copy 4C, 4D chips
I think it's not a bug, it's done on purpose...

426660

[iHenry3]

Here's a article about new 4C chips
http://www.key-programmer.org/2017/02/07/cn900-mini-1-22-2-15-cannot-write-4c-chip-solution/

[keysplus]

What about 4D ?? I know the machines are cheap but this is bullsh*t... What do we do with all the CN2 chips everyone has??

[solitaire]

What about 4D ?? I know the machines are cheap but this is bullsh*t... What do we do with all the CN2 chips everyone has??
Use this bullsh*t... to decode and any other tool to write. And please all users write email to tjecu to restore 4d/ys01 support

[crazylou2017]

JTECU Company already developed brand new CN1 chip which can solve the problem that mini900 firmware 1.22.2.15 can't write 4C.
I attach the new 4C pics here. 428452428453428453
ps:new cn1 chip can be used many times.

[crazylou2017]

What about 4D ?? I know the machines are cheap but this is bullsh*t... What do we do with all the CN2 chips everyone has??

to copy 4D chip, use CN5. here 3 pics.
428454428455428456

[autoTkey]

Thanks for the pics, they mean a lot! :party :

How about all the other key duplicating machines? Will they work with these new 4C/CN1 chips and where can we buy them from? There are so many stores selling fake CN transponders and TJECU is not putting any marks on them so it's impossible to distinguish....

[ucokseparoh]

I was told by a friend that the real CN2/CN5 has 2 dots in their body. Else..it's fake.

[autoTkey]

Any photos of those dots?

[crazylou2017]

Thanks for the pics, they mean a lot! :party :

How about all the other key duplicating machines? Will they work with these new 4C/CN1 chips and where can we buy them from? There are so many stores selling fake CN transponders and TJECU is not putting any marks on them so it's impossible to distinguish....

Yes, it can work with other key duplicating machines. Please make sure what you buy 4C/CN1 chips is made by original TJECU and from a reliable seller. The real one can write 4C when you have newest mini900.

[solitaire]

I was told by a friend that the real CN2/CN5 has 2 dots in their body. Else..it's fake.
with version 1.13 not important how many dots
https://www.youtube.com/watch?v=tRTrz05u7kc

[dinozzz]

Guys, please send photo, where error on cn900 mini: failed to copy cn2, cn1

[solitaire]

Guys, please send photo, where error on cn900 mini: failed to copy cn2, cn1
https://youtu.be/UuhsYngCoc4

[ucokseparoh]

429137

Hi @autokey.. these dots as in picture mate.

[solitaire]

429137

Hi @autokey.. these dots as in picture mate.

this is CN5
i have CN2 without dots and copyng work fine with version 1.13, with higher version not work

https://youtu.be/UuhsYngCoc4

[Fernandowap]

I have cn900mini.


Has any friend managed to read 80bit ford chip?


DST ID83 80BITS?

[keysmith]

I have cn900mini.

Has any friend managed to read 80bit ford chip?

DST ID83 80BITS?

Reading no problem, copying not possible.

[Fernandowap]

Right


My cn900mini did not read ID83 80Bits Ford 2016


I took the test with 2 keys in perfect condition.


New Ford ka, 2016.


Car sold in South America

[keysmith]

Right


My cn900mini did not read ID83 80Bits Ford 2016


I took the test with 2 keys in perfect condition.


New Ford ka, 2016.


Car sold in South America

Mine is V1.13 and reads it fine.

[duplikeytor]

I have 2 and both are 1.12, if only I can upgrade to 1.13

[Fernandowap]

The version that is in my cn900mini
Firmware. 1.20.0.12


Did not read Chip Ford 80bits

[gurmk]

I checked everything. Prior to this I was a computer technician so this is not unknown territory for me. Installed driver, restarted computer, checked device manager when disconnecting and reconnecting, computer does not detect anything plugged in. I'm using the original usb that came with the device, I will use another one and see if that changes anything.

How did you get yours to connect to the computer, I have same issue?

[cosmiko]

Can anyone copy Toyota Auris 2011 Key?? It's a Toyota ID70 80bits G. I couldn't copy it.

[kevfield]

Has anyone worked out how to downgrade back to version V1.13 , as last version is poo cant copy 4c/4d any more ...

Thanks Kev

[godfathertre]

this is what the developer of this tool should release nothing surprises me 0 support the 4d copyng only works with some transponders this was just a way so he could sell his obd addon for the mini cn 900 for the unit shame on you developer of this tool

the cannot admit nothing just look at the website what a mess just wait for a solution soon will be released in this forum as the developer all is interested is selling the tools zero support .

[kevfield]

Yeah , tool is a handy little tool to have and really i do not know why i updated the thing also i can clone on other tools but the update has made it less than it was before ..
does anyone know where the update is stored ? is it in one of the SD cards ?

Thanks Kev

[duplikeytor]

How did you get yours to connect to the computer, I have same issue?

S
Still not able to connect.

[bigkey]

Phew..., just bought 100 of them and all have these 2 dots. Thanks for the info

Just wonder if any one know if CN chip can be cloned multiple times ? ( i.e: TPX2 can only be cloned once)

Hi @autokey.. these dots as in picture mate.[/QUOTE]

[GAM85]

Has anyone worked out how to downgrade back to version V1.13 , as last version is poo cant copy 4c/4d any more ...

Thanks Kev

Updates are stored in stm32f103, firmware Winbond 25Q128 to the old version does not give the result.

[iHenry3]

I clone a Ford Transit 2012 Tibbe Remote 80bit, worked fine!!!

[kevfield]

Great with what version of firmware?

Thanks Kev

[ray-ray]

Have they done anything to there flagship CN900 ? After sell us decorder boxes for 4D,46,4D72 G they stop upgrading, plus the clock keeps ticing. Every few month we need to update or it just won't work.

[iHenry3]

version: 1.22.2.15 I used YS31 CHIP

[P&D]

Have they done anything to there flagship CN900 ? After sell us decorder boxes for 4D,46,4D72 G they stop upgrading, plus the clock keeps ticing. Every few month we need to update or it just won't work.


Did you manage to use the update5.3 only ask because
when i click to open the update it opens flashes on the screen then closes

Many thx

[paul_12345]

Did you manage to use the update5.3 only ask because
when i click to open the update it opens flashes on the screen then closes

Many thx

mine connects fine - no update needed

[Centurion Ls]

This may be of some help .

http://blogs.rediff.com/eobd2/tag/nd900-mini/

[godfathertre]

mini cn 900 latest version cannot read 8 c transponder says no chip tried with 3 mazda keys than read with trs 5000 evo .

[kevfield]

Well I think the update is great for the Toyota if it works but the rest of it has gone down hill waste of money , I feel like smashing it up with a hammer

Thanks Kev

[godfathertre]

the tool is okay for id 46 only since the new update the developer need to release i way to downgrade again to 1.13 as 4d and 4c etc does not work and stop playing with transponders types i hope people stop buying this tool till these issue resolved and why has

the developer not got the balls to address these issues and post on this forum.

[GAM85]

Updated site TJECU https://www.cn900.net , there was a program to copy ID48 https://www.cn900.net/product_view/?id=21 and ID48 blanks https://www.cn900.net/product_view/?id=5

[gurmk]

S
Still not able to connect.

My USB cable was faulty, got a new one and all OK now.

[keysmith]

Updated site TJECU https://www.cn900.net , there was a program to copy ID48 https://www.cn900.net/product_view/?id=21 and ID48 blanks https://www.cn900.net/product_view/?id=5

My V1.13 is working perfect, I might have to buy a second guinea pig unit just for the ID48 cloning 😉

[autoTkey]

So they are asking a 100% of the CN900mini price to be paid second time so one to have the opportunity to use a questionable piece of software. Isn't that too much for their declining reputation?

Tjecu give us a list of the car models and years that you are able to duplicate using your setup, please!

[godfathertre]

mini cn 900 latest software will not read 8c transponder says no chip read 3 different mazda keys with trs5000 .

[keysmith]

mini cn 900 will not read 8c transponder says no chip read 3 different mazda keys with trs5000 .

I can read only 8c with V1.13.

[dinozzz]

Guys, send me update programCN900-MINI-V2.3.exe. My email: *Removed Email Address...

[Centurion Ls]

Try this hope it helps someone

1.13 ND900 Mini firmware

http://jmp.sh/XXPkRS2

[lion0304]

Just updated to 1.23.2.15 from 1.19
Show some bug fixed

[Centurion Ls]

Just updated to 1.23.2.15 from 1.19

So it is no good then ?

Guess it will only work if you are below 1.13
and then may be not

[lion0304]

I make a quick test PCF7936 work now OK, before it is very bad, some need take out chip from key to read.
Have no 8C for test

[Tomisan]

I got a nd900mini version v1.13 and I want to make updated to version v1.15. I tried all the methods and fail.
I got a nd900mini version v1.13 and I want to make updated to version v1.15. I tried all the methods and fail.

[kevfield]

I would leave on version 1.13 u will lose some copy tp functions if u update it

Thanks Kev

[Tomisan]

I got a nd900mini version v1.13 and I want to make updated to version v1.15. I tried all the methods and fail.​
I got a nd900mini version v1.13 and I want to make updated to version v1.15. I tried all the methods and fail.

[Tomisan]

I got a nd900mini version v1.13 and i want to make updated to version v1.15. I tried all the methods and fail.

[solitaire]

I got a nd900mini version v1.13 and i want to make updated to version v1.15. I tried all the methods and fail.
we can exchange
I'll give you version 1.23.2.15
and You give me Your version 1.13 :D

[commieTH]

This thread is good. I failed to connect to update server for a month, then decided to post about it here and saw that I still have the best 1.13 version :)

PS But still, why my update software always says "disconnected"? I upgraded it to latest version, same result.

[kevfield]

we can exchange
I'll give you version 1.23.2.15
and You give me Your version 1.13 :D


i second that......

[duplikeytor]

I HAVE 1.12 AND would like to update to 1.13 as I can't clone to TPX1 or TPX2, only TPX4

[Tomisan]

Hello. how do we proceed.

[Ezmony23]

So where is the best place to purchase a cn900? Does it matter, or are they all the same? Should I be looking for one with 1.13? Thanks

[redliner]

So where is the best place to purchase a cn900? Does it matter, or are they all the same? Should I be looking for one with 1.13? Thanks

Hi try Aliexpress and I think 1.15 is best one as it can copy id48. You can buy cn900 or nd900 they are the same.
I got nd900 I can't update from 1.13 to latest version as I don't know how, update don't work - my computers doesn't see the device. The drivers don't work (exclamation mark) and can't setup the com port.

[godfathertre]

the developer of this tool gives no help since latest update 1.23 only id 46 works so do not update better buy handy baby key programmer better support and can update fast .

[ben21]

Does it mean that the only difference between them
is copying id 48.i can 't make a decision

[redliner]

the developer of this tool gives no help since latest update 1.23 only id 46 works so do not update better buy handy baby key programmer better support and can update fast .

I have 1.13 and another version is 1.15 - 1.23 is fake version and gives problems. I know updates are difficult and no one can do it to make this work properly but it you buy already 1.15 from suppliers then you will get copying id46 id48 4c 4d for sure.

[godfathertre]

do not waste your time with this tool display on all one site missing latest version gives you obd but 4c copying and 4d transponders not working why do not buy handy baby look at video of developer explaining you all different chips etc all you will get with

mini cn900 problems the update is a joke and the developer no help why does it not post a video of this tool and support it properly maybe than could become something better for now not very reliable .

[ben21]

I have 1.13 and another version is 1.15 - 1.23 is fake version and gives problems. I know updates are difficult and no one can do it to make this work properly but it you buy already 1.15 from suppliers then you will get copying id46 id48 4c 4d for sure.
Hi.

I thought that version 1.13 is the best.
Is there any major difference btw 1.13 en 1.15

[redliner]

Hi.

I thought that version 1.13 is the best.
Is there any major difference btw 1.13 en 1.15

as far as I know it's the same plus they add copying id48. They still seling 1.13 old stock and it's hard to find 1.15 for now.
My dealer offered help for update to my device but they want to contol my PC and do it from a distance so I was not happy to share my PC

[strat]

So 1.23 still having problems?

I got mine from here (https://www.aliexpress.com/item/Smart-CN900-Mini-Transponder-Key-Programmer-Mini-CN900/32698680003.html)

It come with 1.13 but they updated description to 1.23 now and added a comment it copies 4D/4C

Haven't updated mine yet still on 1.13 and 4D/4C works but need a id48 solution for CN6

edit: What the!! - looks like they edited the description again that it CANT copy 4D/4C.. i actually contacted them to confirm.

[strat]

Also, the battery for this unit, can someone confirm its a Samsung Galaxy S4 style battery?

[sv2hqx]

yes same
i got s4 battery inside

[HeXeN]

There is a problem between STEP4 and last step. Always "Firmware Update Failed"

[Weasel3]

PC SW 2.6 is out now.
But not any update on the tool itself.

[Jaxrider]

I have this tool, mini 900. and I search over the web for the PC softaware (for saving or loading key data and making key). I see in feature in Function 5 or 6 this details.
but only and always just see the update software. I heard that CN900 has also this PC softaware for saving data but I don't know if it's exist
If someone has it for download, it will be helpfull.
see in attachement my MINI900 tools and CN900 Pc software interface screenshot that Pick up int the internet.
445385445388

[solitaire]

Cn900 pc software is for cn900 not for mini

[jodge]

The cn900 able to program the PCF7946 remote part too or just the immo?

[Fernandowap]

Good afternoon


New language, Portuguese, Spanish, Turkish ... came out of cn900mini


It would be good if it were true,


I made the download on the site, and when I connect cn900mini, I made it already in the latest version, there is no available availability.


These Chinese are crazy

[strat]

anyone else get this email??


TJECU CN900MINI NEW OFFICAL WEBSITE ONLINE NOW!

（中文版在英文下方）



To Our dearest customer and friends,



1. Welcome new member of Cn900mini family! Since cn900mini listed, Multi-language cn900mini is coming now! Since May 1st, six languages are available: Arabic, Russian, Spanish, Japanese, Portuguese and Turkish. Please contact your local distributor and distributor to order.

2. After several months of research and development, breaking through a variety of technical difficulties, 48 chip copy function has been internal testing, if success, You will only need landing APP on the phone, do not need to connect the computer.

3. TOY OBD+cn900mini together can do some Toyota G and Toyota H key all lost now , there are major breakthroughs - through online upgrades,It will be add new function for Toyota smart card all lost.

As the Toyota G and H anti-theft box data complex and geographical distinction, we welcome customer provide us anti-theft box, through the technical processing to add different regions of the models, and constantly improve TOY OBD function.

4. Cn900mini for Toyota G key lost continue to provide free services, please login the www.cn900.net for new code , the website will repay new code to the regrest email.

5. How to update Toyota OBD , please load our official website www.cn900.net or read the attachment please.

6. With the CN1.CN2.CN3 chip hot selling now, There are many high imitate chips in the market , these pirated chips exist in case of high temperature or low temperature easy to deformation, not anti-theft, easy to crack, do not meet industry standards, after the

Cn900mini machine update, they fake chips cannot work any more. So welcome to use our original chips, we always make sure good quality and after service.

[Cr4nky]

Yes, had same email. I am just keeping mine as is, not going to risk updating.

[Duracell2]

I saw now the info, the the newver verisons (above 1.20.2.15) supports ID48, but not more ID46 ??!
The older version supports ID46 but not ID 48.

Is there a posssibility to downgrade to use ID46. Or to use both ?

<feeling confused>

[TERMINATOR1000]

The cn900 able to program the PCF7946 remote part too or just the immo?

Hello
no remote part , like pcf7936 , it's just not possible !

[sv2hqx]

newest version is 1.30.2.18
can copy id46
id48 still working on it

[iHenry3]

So has 4C cloning fixed yet?

[solitaire]

So has 4C cloning fixed yet?
No and never will be.
Use cn5

[sv2hqx]

So has 4C cloning fixed yet?
yes
you have to use original cn1 chips

[autoTkey]

Where from do you get those original chips ?

And how can you be sure they are original if you can't test them on CN900mini before ordering?

And how about other machines? CN900, ND900, TMPro, etc - will they work with those NEW original CN chips?

[sv2hqx]

fake cn1 chips are very old
most sellers on ali have new chips cn1 original
i ordered 2 last times and have original
tested on nd900 (to a friend) and on cn900,cn900mini

[Duracell2]

is it possible to clone ALL ID46 chips ? I need to clone ID46 for OPEL(Vauxhall)/Peugeot/Citroen ? Will it work ?

[lion0304]

is it possible to clone ALL ID46 chips ? I need to clone ID46 for OPEL(Vauxhall)/Peugeot/Citroen ? Will it work ?

Take your chance and report back. That is the only and best way to know.

[sv2hqx]

is it possible to clone ALL ID46 chips ? I need to clone ID46 for OPEL(Vauxhall)/Peugeot/Citroen ? Will it work ?

It worked to all you mentioned
Never failed on id46 to me

[locksmithmtl]

2HHFD56596H203906 acura csx 2006 Key code anyone ????

[sv2hqx]

Deleted
Wrong post

[Duracell2]

"After this update to the latest version, it can't copy 4c and 4d."

Wtf is this ? Am so confused, I don't know what to buy. I just need ID46 clone function.
Is this just temporary ?

455652

[sv2hqx]

you dont read
you can copy 4c to cn1 chips
4d to cn2 or cn5 chips
id46 to cn3 chips

[Duracell2]

sorry. I mixed 4c and id46. I didn' read.

[buntbart]

is it possible to clone ALL ID46 chips ? I need to clone ID46 for OPEL(Vauxhall)/Peugeot/Citroen ? Will it work ?

I have copied about fifty ID46 keys with the CN900 mini successfully. Two times it failed (1x Renault Clio, 1x Opel Movano), because I can?t sniff data from ignition.
T5, 4C was never a problem. Sometimes it was not able to decode 4D. It starts decoding till 99 and then it stops.

I use 4C/4D carbon and different CN chips from Ali. I don?t know if original or not. They works all for me fine.

Firmware is 1.13 I don?t see a reason to upgrade.

For this money it is a small good tool.

[elmelor]

Hello colleagues, version 5.18 that appears in aliexpress, is it good or recommendable ???
Has limitations ??
Thank you very much

[bigkey]

is it possible to clone ALL ID46 chips ? I need to clone ID46 for OPEL(Vauxhall)/Peugeot/Citroen ? Will it work ?

I still using version 1.13 and cloned few Opel 46 without hassle.
Read about problem after updated so have no intention to do so

There are "no good" twice when I could not sniff any data from an Audi 2010 and a Chrysler 300C with a push in fobs (FOBIK key)
Just thinking if I can copy the chip and insert into a dummy fob it may do the job ... maybe not... but cannot clone it anyway

[psiho052]

If somebody managed to clone 48 chips?? I have the latest version 1.30.2.18 and will not clone

[Duracell2]

I bought the cn900 mini and appropriate ID46 chips. (5.5 € /piece)
Cloning worked for Astra H and Peugeot 307

[TomCat2]

you dont read
you can copy 4c to cn1 chips
4d to cn2 or cn5 chips
id46 to cn3 chips

First i ordered cn2 chips.
1pcs from France and 5pcs from UK. With firmware 1.30.2.18 i can`t copy my key (4D60)

today i received another 5pcs cn5 (YS31) chips (same seller from UK) and now it was possible to copy my key. :peaceful:

[keflavik]

Anyone with a solution for the sub firmware 2 update failure on early models?

keflavik

[godfathertre]

the mini cn900 ia a joke latest update only id 46 works the update procedure took me 3 days if you have version 1.13 do not update zero support from developer why not bring a way to downgrade software on machine only use for reading and use the jma handy

baby superb tool and now 1 chip to copy all king chip just introduced and copy id 48 fast .

[Recoder]

My CN900mini could not copy 4d 60 or 63.
Tried as suggested by TomCat2 onto a CN5 and perfect .
Will tryid46 when i get a chance .
HTH
My version is 1.30.2.18
the mini cn900 ia a joke latest update only id 46 works the update procedure took me 3 days if you have version 1.13 do not update zero support from developer why not bring a way to downgrade software on machine only use for reading and use the jma handy

baby superb tool and now 1 chip to copy all king chip just introduced and copy id 48 fast .

[karalaitizzz]

Hi to all. When decoding id46 i got sd1 error. Maybe any one knows the solution?

[godfathertre]

i mate nothing surprises with this tool try to collect data from opel corsa tried 9 times would not collect used my handy baby key programmer first try decoded and all done the developer of this tool should be ashamed why make a tool that very little work

and zero support from developer buy handy baby key programmer and you will not be disappointed i only use my mini cn900 mine for reading chips nothing else .

[Duracell2]

i mate nothing surprises with this tool try to collect data from opel corsa tried 9 times would not collect used my handy baby key programmer first try decoded and all done the developer of this tool should be ashamed why make a tool that very little work

and zero support from developer buy handy baby key programmer and you will not be disappointed i only use my mini cn900 mine for reading chips nothing else .


when sniffing on my Astra H, I noticed, that the data is collected during putting the key INTO ignition, not during turning the ignition.
Maybe this is also the case with your Corsa.
I successfully made the key for Astra H with the CN900 mini.
Maybe you give another try, and come with results.

Best regards.

[iHenry3]

CN900 Mini Key Programmer 1.32.2.19


Add Toyota 71,74,8A Smart key ADD and DELETE via OBDII
Add Toyota 71,74,8A Smart key all keys lost programming
Add Toyota 8A smart key RENEW
Add 8E Bank Data read, CS crypto Programming, CS Unlock
Add Partial 48 Decoding and Copy. Shoddy 48 identification
Add HITAG VAG identification

I tried renewing 8A fob with no luck

[Duracell2]

"Add Partial 48 Decoding and Copy"

I have updated it to latest version (1.32) and will today test a partial decoding function on some VW.
Will come with results soon.

[Duracell2]

Here are the results of the new "Partial 48 Decoding and Copy" function tested on VW Golf MK 4:

You have to update to version 1.32

471162

Decode button is now working. After pressing the decode button, you have to sniff data from ignition lock of the car.
After that,decoding starts, and lasts for AT LEAST 20 minutes. You can see at the picture, that decoding is already 20 minutes in progress.

471164

After that I left it for another 40 minutes. When I came back, the decoding was finished.

471165

As you can see, the Secret Key is visible, but it shows "xxxx xxxx"
I don't know what the meaning of those "x"-es is.


After the decoding, the function "Unlock" is working.
Also "copy" button is shown for coping to CN6 chip. I had no CN6 chip to test.

The problem here is that decoding time is very long. Almost 1 hour.

[Justsuper]

I tried Toyota Smart key 71 all keys lost and no luck also.
Failed to read file.

[mehmet becker]

hi can anyone explain to mi if you check or uncheck the boxes when making or copy keys with the cn 900 mini on the screan ?
thanks and kind regards

[godfathertre]

tried to read old diamond bmw key mini cn 900 would not read says no transponder old saab key the same read both keys after with mini zedbull a good tool if it was properly supported by the developer but cannot be relied to do the

job latest software updated that took forever to update

what else is to say handy baby more expensive but reliable to do the job leaves the mini cn900 behind behind behind .

[redliner]

Please don't use your tools to read diamond keys with EML 10030A chip. ND900 mini v1.13 will alter the chip data and the original key will not work longer in a car.

[Duracell2]

can cn900 mini clone keys with cs protection ?

[mehmet becker]

hi its confirmd cn900mini and toyokey can add 71 smart key
i tried it today ading a smart key to a 2007 toyota fitz with 71 chip and it worked like a charm

also there is a new update out 1.34.2.19
any news on whats new?

[Duracell2]

I heard after this 1.34.2.19 update, ID48 cloning stopped working.
Anyone can confirm ?

[Sam1903]

I heard after this 1.34.2.19update, ID48 cloning stopped working.
Anyone can confirm ?

I can confirm it's working fine

[Sam1903]

Please don't use your tools to read diamond keys with EML 10030A chip. ND900 mini v1.13 will alter the chip data and the original key will not work longer in a car.

not sure about v1.13 but there is no problem on latest version 1.34.2.19

[Sam1903]

i don;t understand with so many users of CN900 mini were complaining about this device. I know that this device is not as fancy or as powerful as Handy Baby, but hey CN900 mini is much cheaper and the transponder chip are also much cheaper than Handy Baby ! Most importantly, it works for cloning various transponders which are popular in the market name it 4D and 46 !!

I also own Tango which support using of CN transponder chip for its key maker and key cloning thus i don;t need to stock up different chips between tango and CN mini.

We buy a device so that it can create profit for our business. as long as it works and can do the job at such a cheap price, why not?

With the latest update of addition to clone 48 chip, i personally feel that this device is really value for the money.

Just my personal opinion though...

[Duracell2]

i don;t understand with so many users of CN900 mini were complaining about this device. I know that this device is not as fancy or as powerful as Handy Baby, but hey CN900 mini is much cheaper and the transponder chip are also much cheaper than Handy Baby ! Most importantly, it works for cloning various transponders which are popular in the market name it 4D and 46 !!

I also own Tango which support using of CN transponder chip for its key maker and key cloning thus i don;t need to stock up different chips between tango and CN mini.

We buy a device so that it can create profit for our business. as long as it works and can do the job at such a cheap price, why not?

With the latest update of addition to clone 48 chip, i personally feel that this device is really value for the money.

Just my personal opinion though...

You are right. The device is just fine.

Do you know, what new is in the 1.34 update comparing to 1.32.
And if it possible to copy key with CS protection (like in VW keys)

[Duracell2]

I can confirm it's working fine

Thank you.
Did the update. Seems OK.

[autoTkey]

So you guys say ID48 transponder cloning works, but what cars exactly does it support?
It just reads the chip and asks for a CN6 - it doesn't say anything about decoding and so on... So i guess it clones only the ID if the ID48 chip which is only the non-crypto info. Like TS888 supports cloning of older Chevrolet/Daewoo and KIA cars? So it's still nowhere near the functions of the Keyline tool and can't even clone ID48 for old VAG cars around year 2000?

Another thing I noticed - it can't read "Megamos I" transponders.

[Automat]

i don;t understand with so many users of CN900 mini were complaining about this device. I know that this device is not as fancy or as powerful as Handy Baby, but hey CN900 mini is much cheaper and the transponder chip are also much cheaper than Handy Baby ! Most importantly, it works for cloning various transponders which are popular in the market name it 4D and 46 !!

I also own Tango which support using of CN transponder chip for its key maker and key cloning thus i don;t need to stock up different chips between tango and CN mini.

We buy a device so that it can create profit for our business. as long as it works and can do the job at such a cheap price, why not?

With the latest update of addition to clone 48 chip, i personally feel that this device is really value for the money.

Just my personal opinion though...

I agree, many advantages......when it works.
Just updated from the website, now 4D doesn't work, should have known. There's reason to complain, hopefully I can resolve the problem.

[Duracell2]

So you guys say ID48 transponder cloning works, but what cars exactly does it support?
It just reads the chip and asks for a CN6 - it doesn't say anything about decoding and so on... So i guess it clones only the ID if the ID48 chip which is only the non-crypto info. Like TS888 supports cloning of older Chevrolet/Daewoo and KIA cars? So it's still nowhere near the functions of the Keyline tool and can't even clone ID48 for old VAG cars around year 2000?

Another thing I noticed - it can't read "Megamos I" transponders.

The ID48 was added just few months ago.
I did a Golf MK4, year 2002. Was Magic 2.
I plan to test also a newer car with CS protection.

I think, device isn't cloning ONLY the chip ID, because it has decoded my chip for 1 hour.
So it has to be password or security bytes.

[autoTkey]

Tested it on a Chevrolet Aveo 2012 - worked in seconds, no decoding. But that was to be expected. They use the easiest transponders.

[godfathertre]

where do you get cn6 transponder for id 48 for mini cn 900 done a few searches cant find none on sale .

[Duracell2]

where do you get cn6 transponder for id 48 for mini cn 900 done a few searches cant find none on sale .

I always order from here. It's the guy who also sells CN900 mini devices. Tested and it's working (for version above 1.20)

https://www.aliexpress.com/item/CN6-ID48-Cloner-chip-Used-for-Mini-CN900-or-Mini-ND900-device-5pcs-lot/32800715874.html?spm=a2g0s.9042311.0.0.lTgyQn

[iuliannj]

Hello friends
I have a problem with my cn900 mini...touchscreen not working anymore when i select something it select another option
It’s someone that knows from where i can purchase touchscreen part?


Sent from my iPhone using Tapatalk

[lion0304]

Hello friends
I have a problem with my cn900 mini...touchscreen not working anymore when i select something it select another option
It’s someone that knows from where i can purchase touchscreen part?


Sent from my iPhone using Tapatalk

Open and check the connector of touch screen. CLean the pins with alcohol before plug in.

[iuliannj]

I already do this and not working...it the same problem. Thank you


Sent from my iPhone using Tapatalk

[Duracell2]

Cloning Peugeot 407 key (ID46 with PCF7941) not OK.
Error message : "Decoding failed"
Used CN900 mini - Software version (1.34, the latest version)

On other hand, cloning Opel Astra H key with PCF7941 works.

[Hristiyan]

Hello guys! I have a question about this CN900 mini - which 4D chips it can copy ? From youtube videos I saw that can copy ID63,64,and Toyota,but what about others ID60,61... ? Because I think to buy it,but need some more info.Thanks !

[Sam1903]

Cloning Peugeot 407 key (ID46 with PCF7941) not OK.
Error message : "Decoding failed"
Used CN900 mini - Software version (1.34, the latest version)

On other hand, cloning Opel Astra H key with PCF7941 works.

did you retry to decode the key on Peugeot 407 few more times? and it still shown a "decoding failed" ?

[Sam1903]

basically it has no problem to clone most 4D transponder in the market including 60, 64 and Toyota/ Daihatsu G chip . Have not tried to clone Subaru G-chip though.

[Sam1903]

Hello guys! I have a question about this CN900 mini - which 4D chips it can copy ? From youtube videos I saw that can copy ID63,64,and Toyota,but what about others ID60,61... ? Because I think to buy it,but need some more info.Thanks !

basically it has no problem to clone most 4D transponder in the market including 60, 64 and Toyota/ Daihatsu G chip . Have not tried to clone Subaru G-chip though.

[lion0304]

basically it has no problem to clone most 4D transponder in the market including 60, 64 and Toyota/ Daihatsu G chip . Have not tried to clone Subaru G-chip though.

Just clone 4D60 Micra Proximity key without problem. Latest firmware.

[Duracell2]

did you retry to decode the key on Peugeot 407 few more times? and it still shown a "decoding failed" ?

tried 3 times. sniffed data but decoding failed.

with Astra H worked on first try.

[godfathertre]

Big problem in this unit is pick up antenna plus pick coil

Not strong enough as i said if this tool was reworked better housing and antenna etc maybe available just one chip instead of several and some support from developer could be s real contender for other cloner but cannot be


Rely upon that is why my handy baby always first on bag .

[Duracell2]

Big problem in this unit is pick up antenna plus pick coil

Not strong enough as i said if this tool was reworked better housing and antenna etc maybe available just one chip instead of several and some support from developer could be s real contender for other cloner but cannot be


Rely upon that is why my handy baby always first on bag .

problem wasn't antenna. Sniffing has worked perfect. All signals picked up.
Decoding starts, but breaks middle in the process.
Seems like software issue.

[mickye_dj]

Anyone with a solution for the sub firmware 2 update failure on early models?

keflavik

i have the same problem ...did you manage to solve it?

[autoTkey]

What do you mean - what problem?
Just need to be stubborn on the update button and push it until it has no more updates to add... In some parts of the update process your tool might look like it is bricked(not responding to the update tool) but just detach the cables from it, turn it off and back on again, restart the update tool and push connect/update again. If still refuses you can try to remove battery as well but be careful not to interrupt an actual going update progress. Give it enough time on each step.
The whole process can take up to 1 hour depending on the servers.

By the way I was "brave" enough to try and copy a Passat B6 ID48 ...or should I say dumb? It surprised me it sniffed the data from quite far away, but of course it couldn't decode it :) Tried few times and each time it replied sniff data was not enough.

[autoTkey]

Tried it on Fiat Stilo 2005 - it killed the original transponder. Had to cut and program two keys instead of one...

[Recoder]

Was there no redcovery button showing .
IE write orignal data !

[autoTkey]

No such button noticed. Transponder wasn't unlocked and didn't show signs of data alteration.
After the data collection step it gives a black screen with some white and red letter writings(don't move the key, etc...). I clicked on the black screen to start calculating and after few minutes Mini900 turned itself off - not just the screen but the whole unit. Tried two more times and gave up on the idea. Then noticed car doesn't recognise the transponder anymore and didn't want to program it too. So prepared two transponders and programmed all by OBD2 and done testing the ID48 functionality of the Mini900.

[vasa]

Hi i have question i have tmini900 with old fw i will update but in tool sey no need new fw . Ok i need bay update but on cn900mini site only updte for 249usd !?New device with5.14fw coast 175usd . i cant find eny contact for company on sites. Have got evrybody contact for company thanks

[lion0304]

Hi i have question i have tmini900 with old fw i will update but in tool sey no need new fw . Ok i need bay update but on cn900mini site only updte for 249usd !?New device with5.14fw coast 175usd . i cant find eny contact for company on sites. Have got evrybody contact for company thanks

You can use this software for update your mini900. CN900 mini cannot use for Mini900.

[vasa]

You can use this software for update your mini900. CN900 mini cannot use for Mini900.

On my device after puch update is Firmaware is latest no need update. My FW is 1.13 maybe for my SN isnt update or need pay 240 usd for it ,but for me is better bay new device with latest FW and old give under table :-) Thanks

CN900mini TEJCU is another company as TJECU mini900 ?

[autoTkey]

I'm not sure but before it was considered that CN900mini is a clone of the ND900. So you maybe have bought the cloned tool.

[Sam1903]

I'm not sure but before it was considered that CN900mini is a clone of the ND900. So you maybe have bought the cloned tool.

CN900 mini is also an original device by Tjecu but just named and sold by different company (Tjecu is the OEM of CN900 mini) while ND900 sell by Tjecu company directly.

When updating, you must use their own update tool/software though

You cannot use ND900 update software for updating CN900 mini and vise versa which i could not understand why but it works fine if you use the correct one to update.

Download the update software for CN900 mini from here: http://cn900.net/

From what i heard, ND900 is originally made for China market while CN900 mini is for international market.

[alkazav]

Does anybody have solution to restore old firmware and software on ND900 mini because afther update to version Software 2.9 and Firmware version: 1.34.2.19 my device cant recognized ordinary ID48 and cant clone ID46 and ID60 on old CN1 and CN3 chip (i have them about 20 pieces) although I could that before update. Crap company and crap device.

[autoTkey]

Solution has already been discussed here few months ago... Buy new original CN transponders. The only solution.

[mickye_dj]

i have problem with id48 reading too ...i dint try cloning 4d o 46 ...with 1.13 worked

[autoTkey]

Problem with ID48 is known too - machine can't read the oldest ID48. Called "Magic 1". With "Magic 2" there are no problems.

[mickye_dj]

yep problem with magic2... passat 2007 no read

[Velocity59]

Solution has already been discussed here few months ago... Buy new original CN transponders. The only solution.

Where would someone buy the "original" CN Transponder chips? There are so many sellers out there that sell fake CN chips.

[autoTkey]

In Autokeys store there are both options - OEM and Aftermarket. The OEM is the one that mini900 can use with the latest firmwares.

[godfathertre]

just buy a handybaby nothing works on mini cn900 and zero support from developer i have this mini cn 900 the only thing that was working the id 46 copy does not work anymore and latest update why does the developer not make one chip and this will stop this

nonsense

of buying 4 different chips i do not trust this tool for nothing last time tried to clone a vauxakll key in corsa tried 20 times would not collect data tried with handybaby job done .

[autoTkey]

It's working fine with original CN chips. Only problem I see is with ID48 - if you try to decode a key it will damage the original transponder. Tested on two FIATs already...

[godfathertre]

good way to mess up customer keys than to obtain or pull pincode and make job ten times harder for locksmith there are no original cn chips most of chips you buy for this tool is hit and miss the id 46 that worked does not work on cn3 or tpx4 on latest version

are you by the way affiliated with developer of this tool if so tell him to try the tool before releasing software so we do not mess people cars .

[Recoder]

I use CN5 on mine as cn2 doesent work.
I done a couple of 1d46 and only needed one sniff of data onto cn3.

I have just got a Handy Baby because of ID48 and it was a god deal from another lockie .
I Like it so far .

[klaudio]

My works fine with 4d ford and toyota, will copy smart key to transponder, ID46 no problems, 4c all good, after reading on id 48 I will not try it, lol, maybe I got lucky with mine and I'm afraid to do an update as I hear they are issues after, paid for itself several times, will be buying handy baby next, is always good to have more than less for back up.

[autoTkey]

VVDI key tool might soon be a much better alternative. HandyBaby too expensive for what it does, for me.

[Asifmehmmod1]

anyone know how to active toyo key obdII device and get code.as my seller is not responding my emails.

[redliner]

I have problem with this tool as version 1.34.2.19 don't work for decoding id46 "Decoding failed" is it something wrong with upgrade, software. Can someone confirm how many micro sd card needs the tool? I opened to check if it's everything ok with the connection and I saw there is a 5 ports and I have just one micro sd card I think maybe with the latest version need more sd cards or put in a different socket ? Thanks

[redliner]

Does anybody have solution to restore old firmware and software on ND900 mini because afther update to version Software 2.9 and Firmware version: 1.34.2.19 my device cant recognized ordinary ID48 and cant clone ID46 and ID60 on old CN1 and CN3 chip (i have them about 20 pieces) although I could that before update. Crap company and crap device.

Have you got id46 decoding problem or just copying with the latest version?

[iuliannj]

Someone know where to buy Touchscreen for CN900 Mini ?

Trimis de pe al meu VTR-L29 folosind Tapatalk

[Recoder]

Hi guys just a quick one.
Used my little red box of tricks yesterday tried to clone ID46 Citroen van 63 plate .
Sniffed data 6 times tried to write on 4 different chips .
After try all areas of reader managed to get one to write sucess .
No start from van done it again still the same .
This did do cloning ok before last update so think its a problem there?.
also having problems now cloning id 60 to cn5 as cn2 never worked but cn5 did .
Looks like they have screwed it up.
Mine is the Six window display version not four.

[autoTkey]

All have 6 buttons after they are updated to latest version. Are you using good CN chips - original from the last batch from TJECU factory?
Did you try to write it on an TPX4 to see if car will recognise it?

[igorr]

All have 6 buttons after they are updated to latest version. Are you using good CN chips - original from the last batch from TJECU factory?
Did you try to write it on an TPX4 to see if car will recognise it?
cn3 are weak nead to be closer to car coil and it will start

[Recoder]

cn3 are weak nead to be closer to car coil and it will start

Thanks for reply guys .
The chips i use are from same batch as previous (3D group).
My friend has four window version all is ok dont think he has ever updated his .
I also trided chip as close to ign as possible still non start.
As i said i have handy baby so think this little tool maybe headding for the back of the draw,,
Thanks all

[redliner]

Can somebody tell what chips are compatible for lates version 1.34. CN1 CN2 CN3 don't work those left from my old version and now cn1 and cn2 read as ordinary id60.
Does cn5 replace all for newest version??
Transponder Generate option works for special chips or also can generate from blank ordinary chips?
505031

[dimet]

..............

[dimet]

Can someone tell me can I program CN1 transponders several times?

[Asifmehmmod1]

Can someone tell me can I program CN1 transponders several times?
Yes you can reprogram them

[Galee]

Hi guys got Ford Fiesta 2014 4d 80bit needs spare key can Cn900mini copy this? And if to cn5 transponder?

https://uploads.tapatalk-cdn.com/20180404/c72fe71d976992c06092eb1917c1a0c1.jpg

https://uploads.tapatalk-cdn.com/20180404/a7f748f395db8e119508ce6e5b862d42.jpg

[autoTkey]

Nope. Mini can't do it.

[Galee]

Nope. Mini can't do it.

What was the error just fail? And what transponder was you using to clone to please?

[Asifmehmmod1]

if you want to copy id 83 transponder you should use cn5 transponder.no other transponder will work.

[Galee]

Hi thank you I will be with the car Friday so will let you all know.

[lion0304]

if you want to copy id 83 transponder you should use cn5 transponder.no other transponder will work.

Here we talk about CN900. And if you wan to copy, first need decode this chip. Mini 900 or nd900 cannot decode any iD83.

[crazylou2017]

anyone know how to active toyo key obdII device and get code.as my seller is not responding my emails.

You can search sk204 on uobdii.com, they have activation procedure. Hope it helps.

[crazylou2017]

VVDI key tool might soon be a much better alternative. HandyBaby too expensive for what it does, for me.

VVDI key tool can copy ID48 96bit now, for the price must be more than 400USD, if you have 48 96bit authorization in VVDI2, you can combinate VVDI2+ key tool to get copy ID48 96bit, then key tool is better alternative for its price.

[TERMINATOR1000]

Hello
for cloning Yamaha 4d69 i need to use CN2 or CN5 ?
Thanks

[lion0304]

Hello
for cloning Yamaha 4d69 i need to use CN2 or CN5 ?
Thanks

I think both can match

[peugeot 307]

Greetings, I am thinking about buying a handy baby or cn900mini, can you recommend me to your experience what to take. most of all I should have been working with peugeot or citroen vehicles from 2001-2004, but I would also like newer and possibly other types of vehicles. but at the moment it is most needed for PSA 2001-2004
thanks in advance
( sorry if is a wrong topic )

Can the cn900 device copy the Peugeot 307 2002 id46 or not

[rusevi91kk]

Not copy! Decode filed!Not buy!

[autoTkey]

...
Can the cn900 device copy the Peugeot 307 2002 id46 or not

Yes, it can. But if I were you I would consider also KeyDIY KD-X2 or Xhorse VVDI2 Key tool - both of them offer a lot more bang for the buck than CN900mini or the overwhelmed and overpriced HandyBaby.

[rob h]

not all function are as good,
better read about them first,

Yes, it can. But if I were you I would consider also KeyDIY KD-X2 or Xhorse VVDI2 Key tool - both of them offer a lot more bang for the buck than CN900mini or the overwhelmed and overpriced HandyBaby.

[peugeot 307]

thanks for the answers, everywhere on the internet where I was looking for and who I asked everyone has shared opinions, some of them work with someone, in any case a lot thanks

[dimet]

How to copy 4D64 transponder from renault megane to CN2?