Toyota Crown 2007 smart key all key lost ..

[Slem]

Hi m8s

I have Toyota Crown 2007 (Smart Key system with fob slot ) all key lost, I reset the immo only with SKP900 devise and register a new key on it , the car started but the problem is the Lock, Unlock and proximity function not working. I need your help to reset the EEprom 93C76 in the smart box to be able to program the lock, unlock and proximity .. please note that i programmed a used smart key not new and reseting the C76 will allow me to complete the proximity job ..

93C76(mark x) Crown smart box 89990-30010 original bin attached

365787365788

[Slem]

Any help please

[aketokediag]

Hello m8,
Try and check your smartkey fob battery if is active. Please change it if is not active your skp900 or X-100 is very good to handle the job. check carefully.
Regards

[usman4]

no there's no fault of battery at all, because SLEM is right this vehicle needs smart reset or virginize file in case of proximity working

[abvayani]

send your Dump i will reset for you.

[siyadk]

are you sure the chip you read is correct. isn't it supposed to be 93c86

[davidjunior]

There is no smart box in this, car, its a simple ID 70 transponder. You do not need any machine to Programme the key fob with, simple Manual programming process.
Same like we do for a bladed key.
You can reprogramme new or used fob with out any problem, same like bladed key

Leave the driver door open
Like insert the key into slot 2 time and remove it
close and open the door 2 time
Leave the door open
Insert the key in slot and remove it
close and Open the door 2 Time
Insert the key in slot
Close the door
Press the switch button 2 time
remove the key
car lock will cycle
press lock and unlock button togather for 1.5 seconds
and the fob is programmed

David Junior


I

[Slem]

Thanks for all the replays .. Usman4 should report the result ..

[Brayn]

Very late...
But I can this vehicle model
Used smart key or brandnew key
This type keys not Smart key they are Interligent keys.
93c76 can reset and program keys
Any one need help post dump file

Sent from my C5502 using Tapatalk

[abvayani]

Hi Bryan i have another Reset Dump for Crown but the Problem is when i press Break Start Button Light Should Be Green.

but in my Dump i car Start the car but Green Light On Button its not coming On.
i think my Dump is not for same Car.

[Brayn]

Hi Bryan i have another Reset Dump for Crown but the Problem is when i press Break Start Button Light Should Be Green.

but in my Dump i car Start the car but Green Light On Button its not coming On.
i think my Dump is not for same Car.
Can Vehicle start?

Sent from my C5502 using Tapatalk

[abvayani]

Yes Vehicle start Smart System is also working fine.

Can you reset for me my dump that the original dump i was send you.

Sent from my SM-J700F using Tapatalk

[Brayn]

Yes Vehicle start Smart System is also working fine.

Can you reset for me my dump that the original dump i was send you.

Sent from my SM-J700F using Tapatalk
If vehicle start, also Smart system work why you need reset file??

Sent from my C5502 using Tapatalk

[abvayani]

Bcoz i got that dump from my Friend.
I already programe in 3 cars.

Only the Problem is On Start Button Green light Should be Come ON when we Press Break.
And when i press Start Button for ACC Position the light should be Orange Colour but on ACC position Light Come On Green Colour.

Sent from my SM-J700F using Tapatalk

[abvayani]

I have a Dump but That Dump is not for same Car

Sent from my SM-J700F using Tapatalk

[Brayn]

Hi Bryan i have another Reset Dump for Crown but the Problem is when i press Break Start Button Light Should Be Green.

but in my Dump i car Start the car but Green Light On Button its not coming On.
i think my Dump is not for same Car.

your file is 93c66. is that correct?

[abvayani]

is a Original Dump From Car

[triplerkeyservice]

Hi friends,
I have Toyota Crown 2007 Smart Key system with fob slot all key lost, I reset the immo only with t-code devise and register a new key on it , the car started but the problem is the Lock, Unlock and proximity function not working. I need your help to reset the EEprom 93C76 in the smart box to be able to program the lock, unlock and proximity is there a solution for?

[triplerkeyservice]

Hi mate here is the original dump Toyota crown 2007

[usman4]

here u go........

[Babaz679]

Hi mate here is the original dump Toyota crown 2007

HI triplerkeyservice,
can you please send me the dump that worked for you?
will this dump work same for nhw20 prius 2008? Want to try

thanks,