Renault CAN/K-line ECU Tool

[godfathertre]

is anybody using this tools for renault cars i read is very good i have contacted the company xxxxxxxxxxxxxxx several times but not reply does anybody have a price for it any real feedback from users thank you i do not

want to pay too much as truecode although good modules too expensive and not enough work to justify price .

[Gavra]

For Renault there is no better tool.......

[paul_12345]

For Renault there is no better tool.......

AVDI released the new cars way before this tool didn't they?

[Gavra]

AVDI do NOT work on all vehicles, can't do immo of on Sirius32N over OBD....and with cars where is used 95040 not working at all......And all other where K line is used is not working at all.. that goes for Dacia too

[totalkey]

AVDI do NOT work on all vehicles, can't do immo of on Sirius32N over OBD....and with cars where is used 95040 not working at all......And all other where K line is used is not working at all.. that goes for Dacia too
Check last update for and Renault, they added some kline

Sent from my VOYAGER2_DG310 using Tapatalk

[Gavra]

ABRITES Diagnostics for Renault/Dacia 6.9 (http://www.abrites.com/products/abrites-diagnostics/for-renault-dacia)We have released a new special function RR011. This special function allows:
* Reading and updating the EEPROM of the following ECUs:
- EDC15C3, EDC15C13, EDC17, SIRIUS32, SID301, SIM32, SAFIR/SAFIR2/SAFIR200 (reading only), IAW 6R.20, IAW 6R.30 (reading only)
* Reading and updating the FLASH of the following ECUs:
- EDC15C3, EDC15C13, EDC17, SIRIUS32 , SID301, SIM32
* Clearing IMMO code data for the following ECUs:

- EDC15C3, EDC15C13, SIRIUS32, SID301, SAFIR/SAFIR2/SAFIR200,SIM32, IAW 6R.30

And they will probably make another new function to get to UCH with K line and 95040? So basically you need 3 licences to get immo, add key and do dash + AMS, SP and device.....

He asked about Renault tool, if he asked about multi tool, I would recommend AVDI, but NOT for Renault only. And again, this is just my opinion.

[godfathertre]

cant afford avdi s this tool if good price is good investment.

[dadal]

can someone post ( if it is allowed by forum rules ) a recommend link of an good clone avdi ? good price+pcb
thanks

[danielif]

Hi. I use the Renault CAN/K-line ECU Tool, very usefuly for Renault.
For contact to suport, and sales departament, try again and again.
If you find another way to contact support,, please share it.
Thanks.

[Gavra]

can someone post ( if it is allowed by forum rules ) a recommend link of an good clone avdi ? good price+pcb
thanks
Original have issues, and you asking someone to recommend good copy? Do NOT exist :)

[dadal]

no copy is perfect, each copy has problems ...
I can live with that

[godfathertre]

does anybody have a good place to buyRenault CAN/K-line ECU Tool this tool renault tool i am in uk and emailed several distributors still no answer from emails.

[dadal]

we have to send email to our Chinese friends not to distributors..it is now time to copy it :)

[godfathertre]

i cannot believe the company do not answer to email maybe better buy truecode less hassle if goes wrong uk customer service how to these people deal in business this way i just go crazy.

[purdy]

I gulped when I bought truecode you soon forget how much you paid when it works well.


Sent from my iPad using Tapatalk

[HeXeN]

Any news? I need to buy this device. PM me if someone has a connections

[Saulyss]

What connections you need ? , there is contact e-mail on his webpage , and thats good and trustable guy i know him personally .

[albertros]

google offer
http://boutique.formadiesel.com/en/electronique-et-programmation/16-renault-cank-line-ecu-tool.html#

[shadow12]

I ordered mine through uk scooter agents, was in stock and can confirm excellent tool for renaults

[godfathertre]

keep sending emails to web email he will eventually answer you buying anywhere else you will pay twice as already told you .

[HeXeN]

I keep sending

[AndyCZ]

Has anyone manage to get in touch with them? I email them, skype and call on the phone. No answer so far within a week.

Any contact they are answering appreciated.

Thanks.

[parapilot]

i gave up. look at renolink...

[metalik]

Try here, good distributor http://sklep.atomis.com.pl/RENAULT

[TERMINATOR1000]

Try here, good distributor http://sklep.atomis.com.pl/RENAULT


Or this ! 100% :unionflag::unionflag:https://www.therenaultman.com/product-page/renault-can-k-line-ecu-tool
10% for http://www.digital-kaos.co.uk members !
already buy on his store , present on Ebay ( http://www.ebay.fr/itm/Renault-CAN-K-line-ECU-Tool-for-Immobilizer-Decoding-and-key-programming/182848513319?hash=item2a929ee527:g:zM8AAOSwmOJZ7NI K ) but no discount ...

Mail and phone response !

[Faraday]

Best buy from distribitor. IMHO very good Tool I use it every day.

[TERMINATOR1000]

Best buy from distribitor. IMHO very good Tool I use it every day.


Wysłane z iPhone za pomocą Tapatalk

give us procedure to buy directly on distributor ? ( ONE piece not lot 10 pc !)

[schouten1977]

i buy it by tomsad poland i have it 2.5 years amazing tool

[HeXeN]

You cant buy it directly. They never reply you.

[TERMINATOR1000]

You cant buy it directly. They never reply you.
yes ! i confirm they never replied , contact https://www.therenaultman.com .

[godfathertre]

i see the device now double the price from uk distributor https://www.therenaultman.com (https://www.therenaultman.com/) . but if available in stock is still a good price as renolink does not cover 4 button megane .

[TERMINATOR1000]

i see the device now double the price from uk distributor https://www.therenaultman.com (https://www.therenaultman.com/) . but if available in stock is still a good price as renolink does not cover 4 button megane .

yes sir
RenOlink + OBDlink SX = £ 90 ( covering 90% function of "Renault Ecu Tool"
Renault Ecu Tool = £ 700 , but it's not all days you program id46 4 butons cards ...

Finely RenOlink is the better tool for Renault , and for free is my best acquire , no regret
and Renault Ecu Tool , too expensive just for function "program id46 4 butons cards" , i bought this tool in hope id47 key & cards programming soon ( and the D day Renault will change programming algorithm ! ) , if this tool is allays developed

[godfathertre]

Renault Ecu Tool i am very happy with mine and paid half of what is advertised direct from http://www.immo-tools.lt/en/products/renault.htm i do not use renolink i have the obd link sx cable that i use for forscan is

this the clone software you have bought of renolink or the original licence for it with updates .

[TERMINATOR1000]

Renault Ecu Tool i am very happy with mine and paid half of what is advertised direct from http://www.immo-tools.lt/en/products/renault.htm i do not use renolink i have the obd link sx cable that i use for forscan is

this the clone software you have bought of renolink or the original licence for it with updates .

http://www.immo-tools.lt/en/products/renault.htm : now they selling just big quantity ...

and RenOlink Update is just an EXE file , no protected software , just cable activation ( to hope protect ) !

no fake RenOlink ! because RenOlink is already a fake DDT2000 + EXTRA FUNCTION ! using without authorizing Renault DDT2000data ....

[RIMKACHIP]

Renault ecu tool and renolink is not comparable !! 90% ? It’s joke ? You forget lot of ecu motors , Siemens uch of megane scenic 2001, t5 key programming of old Renault keys, edc17 med17 virginise, etc. And better tool for megane 3 2009-2015 key programming ! Renolink don’t do this .


Envoyé de mon iPhone en utilisant Tapatalk

[TERMINATOR1000]

hi your mail box is full

RenOlink , i use it 90% of time , do 90% of job + 100% diagnostic functions not present in Renault Ecu Tool !!!!!!!!!!!!!!!!!!
Q : can you learn virgin UCH with Renault Ecu Tool
A : NEVER !
for me RenOlink is the most complet Renault tool in the world , yes Renault Ecu Tool is most powerful !

[Faraday]

this is about renault ecu tool I don't care if you like it or not stay on topic

[TERMINATOR1000]

this is about renault ecu tool I don't care if you like it or not stay on topic

Don't flood topic please ! you'r post isn't interesting too

i'm just talking about functions tool , all info you need are already provide ....

[voltec]

Did anyone program this tool card in renault fluence 2010?

[jah83]

http://www.immo-tools.lt/en/products/renault.htm : now they selling just big quantity ...

and RenOlink Update is just an EXE file , no protected software , just cable activation ( to hope protect ) !

no fake RenOlink ! because RenOlink is already a fake DDT2000 + EXTRA FUNCTION ! using without authorizing Renault DDT2000data ....


Yes it s fake renolink. Extra fonction has been made by gabi and you re only a pathetic robber. The reason why you ve been ban.
And more you re lying the new update will not work
.
ET dans notre langue t es vraiment une sous merde

[TERMINATOR1000]

Yes it s fake renolink. Extra fonction has been made by gabi and you re only a pathetic robber. The reason why you ve been ban.
And more you re lying the new update will not work
.
ET dans notre langue t es vraiment une sous merde

lies , i'm good and he's bad !:star:

SetupRenOlink ( https://mega.nz/#!eJ8x1TpB!MEfAloaWpKn9Nz6N-dc08NztyjqY60nLBtK0oTIkpbo )
1.54 ( https://mega.nz/#!KMlVADSZ!C_YXyBg2f2SRJ7iED-SfQiMJMn6F9X1jnJ7UjAM_C_4 )

bye rasta man !

[TukoSalamanca2]

yes ! i confirm they never replied , contact https://www.therenaultman.com .

Hi, what Renault cars can programm Renolink? or where can i find a car list? Thankyou

[jodge]

Hi, what Renault cars can programm Renolink? or where can i find a car list? Thankyou

the "other polpular car forum" market section :D
no official site

[TERMINATOR1000]

Hi, what Renault cars can programm Renolink? or where can i find a car list? Thankyou

Hi , simply

open the software 1.54 and you select EXTRA > KEY

https://mega.nz/#!KMlVADSZ!C_YXyBg2f2SRJ7iED-SfQiMJMn6F9X1jnJ7UjAM_C_4

All car except Clio 4 , Megane 4 , Talisman & Espace 5

contact this guy ( it was banned to the forum because it was Russian espion working for Iranian F.B.I agent ) gabigafu@hotmail.com

It is the most powerfull tool at this day for less than £ 150 !

[jodge]

Hi , simply

open the software 1.54 and you select EXTRA > KEY

https://mega.nz/#!KMlVADSZ!C_YXyBg2f2SRJ7iED-SfQiMJMn6F9X1jnJ7UjAM_C_4

All car except Clio 4 , Megane 4 , Talisman & Espace 5

contact this guy ( it was banned to the forum because it was Russian espion working for Iranian F.B.I agent ) gabigafu@hotmail.com

It is the most powerfull tool at this day for less than £ 150 !


sorry for the off but WTF this iranian thing? I split my tea to the monitor :D :D

[drugowaz]

Zeitgeist shit.double agent. He bannen probably was hacking iranian womans panties illeagaly.

[jah83]

If you would be better than him you wouldn't need to rob his job...

[TukoSalamanca2]

Hi , simply

open the software 1.54 and you select EXTRA > KEY

https://mega.nz/#!KMlVADSZ!C_YXyBg2f2SRJ7iED-SfQiMJMn6F9X1jnJ7UjAM_C_4




All car except Clio 4 , Megane 4 , Talisman & Espace 5

contact this guy ( it was banned to the forum because it was Russian espion working for Iranian F.B.I agent ) gabigafu@hotmail.com

It is the most powerfull tool at this day for less than £ 150 !

Thankyou very much sir, very friendly.

[TERMINATOR1000]

Renault CAN/K-line ECU Tool can't connect to last Megane 3 Scenic 3 ( 2015 ) " ph3 "
the tool don't communicate to BCM , " failed CAN " message , no update , no Clio 4 support ...

[jodge]

Renault CAN/K-line ECU Tool can't connect to last Megane 3 Scenic 3 ( 2015 ) " ph3 "
the tool don't communicate to BCM , " failed CAN " message , no update , no Clio 4 support ...


What do you mean no update??? It's simply not true

The last update is 2.65 07/03/2018

[TERMINATOR1000]

What do you mean no update??? It's simply not true

The last update is 2.65 07/03/2018

This tool can't program CLIO 4 and Megane 3 ph3 keycards ! It's old cars .... but he can't do the job .

[Faraday]

This tool can't program CLIO 4 and Megane 3 ph3 keycards ! It's old cars .... but he can't do the job .

send proof, I like this tool and it helped me a lot
and btw which tool support Clio 4 that old car?

[wissamshaat]

only tools supportion clio4 for now avdi zedfull and mvp pro last 2 weeks
renault ecu tool is a realy powerful tool but updates are rare and a day will come and they will not show againe like last time they was sleeping for 4 years
renolink is good for the money to

[godfathertre]

this tool is one of the best tool for renault and i have also heard there will be a update soon to cover new models what is the price of avdi or truecode also does airbag ecu etc megane 3 2012 2 minutes

programming cards or you can spend 5 or 6 times for other tools latest update 2.65 now sold in uk by uk stockist so no need to wait from abroad there is also renolink but not used personally so cannot

comment .

[castin]

Reanult Can Tool software v2.67 - support Clio IV add card :D

[HeXeN]

option: delete ABS dtc's - doesnt work well. I had to use launch. Megane III.

[godfathertre]

New release renault clio 4 keycard programming just released.

[TERMINATOR1000]

New release renault clio 4 keycard programming just released.

after 2016 too ? NORMALLY it's with flash HFM if all key lost ...

hope coming soon AES keys for Trafic 3 , Sandero 2 , Twingo 3 & New SMART....

[RIMKACHIP]

Hi after 2016 not working. Only before.


Envoyé de mon iPhone en utilisant Tapatalk

[gogu]

Hi.I am waiting too AES keys for Logan 2 and sandero 2.

[TERMINATOR1000]

Hi after 2016 not working. Only before.


Envoyé de mon iPhone en utilisant Tapatalk

no tool can do AKL by OBD2 , need to extract HFM PIN code before , this function never update i thing .

now the problem is to obtain cheapest good key cards :questionmark:

[TukoSalamanca2]

no tool can do AKL by OBD2 , need to extract HFM PIN code before , this function never update i thing .

now the problem is to obtain cheapest good key cards :questionmark:

http://www.vag-info.org/news/246-nowe-urzadzenie-renault-do-2018-roku

[TERMINATOR1000]

Theft tool , no publish that or you will be ban !

[TukoSalamanca2]

Theft tool , no publish that or you will be ban !

I only want show you that its not impossible Renault till 2018 via obd.

[TERMINATOR1000]

no sure card is programming to constructor process , maybe an other method who erase genuine data BY OBD2 , 100% theft tool ( 5000€ )
info provide to Renault technician , after use this tool , they can't program key with CAN CLIP ....
JUST IMMO OF WHEN TOOL IS plug

[bocaje]

Hello my friends
Speaking of Renault cards any experience in China cards? A lot of discusion but no conclusion on this.
If anyone can help type of cards and ok cards for each car ...
Talking about megane 3 and same generation cars and clio 4

Regards


Enviado do meu iPhone usando o Tapatalk

[TERMINATOR1000]

all available in China ! no problem today all firmware PCF79-41 -45 -52 -53 are OK !

[jodge]

For me
Laguna 2 button cards (10/3) the remote part not working properly. Probably the 433 transmitter is defected
Laguna 3 cards is significant thicker and don't fit the reader
Always check the precode the last 10 megane 3 cards are misprogrammed to something else

[jodge]

...and sometimes amazigly bad quality cases :(

[bocaje]

For me
Laguna 2 button cards (10/3) the remote part not working properly. Probably the 433 transmitter is defected
Laguna 3 cards is significant thicker and don't fit the reader
Always check the precode the last 10 megane 3 cards are misprogrammed to something else

Maybe problem with programer possible? Maybe wrong Just asking.
If precoding so importante how advertise not only in China that one type goes with several cars megane 3 type of course.


Enviado do meu iPhone usando o Tapatalk

[Ocin]

Someone know where buy renault tool, reseller doesn't answer ...
this tool and update are still alive ?

[TERMINATOR1000]

Someone know where buy renault tool, reseller doesn't answer ...
this tool and update are still alive ?

https://www.therenaultman.com/product-page/renault-can-k-line-ecu-tool

negotiate 10% discount with this guy

[ghostrider72]

Try that guy. Always responds to my emails, et least once a day:

www.premium-tools24.com

Btw. Did spare key in 2004 Renault Traffic yesterday with it. Works great

[bocaje]

Try that guy. Always responds to my emails, et least once a day:

www.premium-tools24.com

Btw. Did spare key in 2004 Renault Traffic yesterday with it. Works great

I confirm Just purchaced last week

Regards


Enviado do meu iPhone usando o Tapatalk

[TERMINATOR1000]

just for info Clio 4 2015+ AKL ! Tool is unable to program card .... ( And Megane 3 2015+ too .... )



Renault anti theft protocol since 2015 +

[bocaje]

Hello
Sorry to Make sad update 2 megane III from 2014 month june fail tested more than 10 cards virgin, maybe too expensive tool for This fail.
Please help if i do anything wrong

Regards


Enviado do meu iPhone usando o Tapatalk

[rob h]

I programmed a megane 3 yesterday, non keyles.
1 org + 1 added. Works fine.
Chinees koleos card.



Hello
Sorry to Make sad update 2 megane III from 2014 month june fail tested more than 10 cards virgin, maybe too expensive tool for This fail.
Please help if i do anything wrong

Regards


Enviado do meu iPhone usando o Tapatalk

[bocaje]

I programmed a megane 3 yesterday, non keyles.
1 org + 1 added. Works fine.
Chinees koleos card.

I Just share my experience good for you your ok job. Older also did ok. I Just wold like to know simillar experience. I think the year is the problem. Dont know if i did anything wrong or its a Kind of protection.
Thanks


Enviado do meu iPhone usando o Tapatalk

[MVVL]

Hey. To program the card, you need to take a pin-code somewhere, or does the program do everything yourself?

[rob h]

It will find pin automatically,

Hey. To program the card, you need to take a pin-code somewhere, or does the program do everything yourself?


About the Koleos key cards that are sold like megane 3 cards.The spacing in the card holder is made to hold nsn14.
So there is to much play to hold the va2 blade in place.
Pulling the card out, is almost impossible, the blade always comes loose.
NSN14 blade 8.7mm width
Va2 blade 7.3mm with
So i am looking for better cards, with logo.

[MVVL]

To bind a map using Renault CAN/K-line ECU Tool you need to have a pin code or the program itself finds or does not require a pin code?

[fabi]

Not require a pin code. Program card/key without PIN code.

[bocaje]

I programmed a megane 3 yesterday, non keyles.
1 org + 1 added. Works fine.
Chinees koleos card.

didi you use 2.7 update?
could that be the problem?

regards

[rob h]

Yes, on the megane 3, used the latest V2.70 version.
Worked fine.

[bocaje]

Update .... clio 2015 /11 not possible key learning with key available. Even with pin bypass.
Bigining to wish never purchase it

Regards


Enviado do meu iPhone usando o Tapatalk

[TERMINATOR1000]

Update .... clio 2015 /11 not possible key learning with key available. Even with pin bypass.
Bigining to wish never purchase it

Regards



Enviado do meu iPhone usando o Tapatalk

Hello
What is the problem during procedure ?
Post an video

576569

[bocaje]

As your picture not quite iqual as i use version 2.7 but no info or change in latest software só no diference in This function, so after that nothing hapens... just close and wait for comands

If i did something wrong please help
Thanks


Enviado do meu iPhone usando o Tapatalk

[godfathertre]

did you have a booster pack on the car i myself i am very impressed just done a clio 2000 with sagem ecu that could only be done before by eeprom now can be done by obd by this tool the developer is trying

hard version 275 now i have nothing but good about this tool just buy the equivalent tool from arbitrates or truecode and see the difference in price alone this tool covers 90 percent of renault vehicles .

[castin]

Clio IV 2017 AKL - read reader dump (Upa-S), load dump, add HitagAES OK.
Still wait for EDC16 read option :/.

[lidons]

I have the tool and I am very happy with it, no complaints for today. :)
a question, it is possible to read eep of a megane UCH UCBIC 68h05b16 of the first with infrared key, can clone in another unit? Once I tried, I could not, I do not know if I was doing it correctly, any comments about this work?

[bocaje]

did you have a booster pack on the car i myself i am very impressed just done a clio 2000 with sagem ecu that could only be done before by eeprom now can be done by obd by this tool the developer is trying

hard version 275 now i have nothing but good about this tool just buy the equivalent tool from arbitrates or truecode and see the difference in price alone this tool covers 90 percent of renault vehicles .

Yes other functions are very good...only been having problem with megane 3 and this clio iv, no booster....do you think that made the diference?
Int this clio iv it opens the pin bypass ok than when press ok to proceed , back to main board.

[TERMINATOR1000]

Clio IV 2017 AKL - read reader dump (Upa-S), load dump, add HitagAES OK.
Still wait for EDC16 read option :/.

Hello
AKL YES !
but have tested with one working key ?
B.R

[castin]

Hello
AKL YES !
but have tested with one working key ?
B.R
I think if AKL work, then with one working card too.

[TERMINATOR1000]

I think if AKL work, then with one working card too.

OK , i never tested yet , hope when i need this function all will be OK ...
... anyone know cheap NEC 70f3633 reader ( in perspective of failed tool read PIN ) ?

[RIMKACHIP]

Hello
AKL YES !
but have tested with one working key ?
B.R

If he had read with upa I think he didn’t have card.
Programming card with dump is only if you have all key lost.
All year 2016 2017 2018 works fine by obd if you have working card. I tested more than 30 clio.


Envoyé de mon iPhone en utilisant Tapatalk

[RIMKACHIP]

OK , i never tested yet , hope when i need this function all will be OK ...
... anyone know cheap NEC 70f3633 reader ( in perspective of failed tool read PIN ) ?

Carprotool is good tool for read this chip.


Envoyé de mon iPhone en utilisant Tapatalk

[TERMINATOR1000]

If he had read with upa I think he didn’t have card.
Programming card with dump is only if you have all key lost.
All year 2016 2017 2018 works fine by obd if you have working card. I tested more than 30 clio.


Envoyé de mon iPhone en utilisant Tapatalk

& never fail , all is OK , thanks
no one doubt this tool is OK

[bocaje]

If he had read with upa I think he didn’t have card.
Programming card with dump is only if you have all key lost.
All year 2016 2017 2018 works fine by obd if you have working card. I tested more than 30 clio.


Envoyé de mon iPhone en utilisant Tapatalk

Hello.
So for shore i fail in something. Could it be the Chargers?
Thanks


Enviado do meu iPhone usando o Tapatalk

[castin]

Hello.
So for shore i fail in something. Could it be the Chargers?
Thanks


Enviado do meu iPhone usando o Tapatalk
60sec - job done.
Load dump - enter security mode - check card - add card - thats all.

[TERMINATOR1000]

60sec - job done.
Load dump - enter security mode - check card - add card - thats all.

What do you mean when you saying "Load dump" ?
we talking OBD2 process !

[castin]

What do you mean when you saying "Load dump" ?
we talking OBD2 process !

Yes, but it's info about AKL situation. After load dump from reader, all via OBD.

[TERMINATOR1000]

Yes, but it's info about AKL situation. After load dump from reader, all via OBD.

Hello
OK , & what tool you use to read HFM ?
thanks

[gogu]

You can use ABRITES

Sent from my SM-G900FD using Tapatalk

[RIMKACHIP]

Hello
OK , & what tool you use to read HFM ?
thanks

You can use carprotool


Envoyé de mon iPhone en utilisant Tapatalk

[TERMINATOR1000]

You can use carprotool


Envoyé de mon iPhone en utilisant Tapatalk

yes sir , but i use only Chinese COPY cheap tool ( Orange 5 , Xprog .... it's OK to ? )

AND generally honest customer have an defective card to repair ( soldering coil like Megane 2 ) , it's 2 years old car !!!!!!

[jodge]

Today i was tested the Clio II sagem key learn. (AKL) The key is used (from scrapyard), 1 button id33 tp and remote on one pcb. All ok :) Finally bcose i really hate to take out those sagem immo-s.
I love this tool :)

[TERMINATOR1000]

Today i was tested the Clio II sagem key learn. (AKL) The key is used (from scrapyard), 1 button id33 tp and remote on one pcb. All ok :) Finally bcose i really hate to take out those sagem immo-s.
I love this tool :)

you can program used id33 on another car ? IMMO + REMOTE CONTROL !!!!
what is the procedure ? petrol or diesel ECU

[jodge]

- Read identification
- Reset to virgin & learn keys (follow the procedure)
if all done and the car is starting
- Erase all remotes and learn REMOTE #1

3-4 min easy job like the oders, no matter the the engine

[TERMINATOR1000]

- Read identification
- Reset to virgin & learn keys (follow the procedure)
if all done and the car is starting
- Erase all remotes and learn REMOTE #1

3-4 min easy job like the oders, no matter the the engine

this process change genuine parameters ! now car can't start with dealer key ...
other problem only one remote key can be programmed ( two if same car provide )

in your case is petrol or diesel car ?

[jodge]

You can program 2 remote keys easy or 4 just tp.
And honestly who cares the genuine parameters on a 20 years old car??

petrol 1.2 16 valve. Sirius 32 ECU

[TERMINATOR1000]

.
And honestly who cares the genuine parameters on a 20 years old car??

petrol 1.2 16 valve. Sirius 32 ECU


OK , if it's same technik for diesel engine all is perfect !

[jodge]

OK , if it's same technik for diesel engine all is perfect !


i think you misunderstanding something. The sagem immobox not related with the engine type and the key programming is just erasing the immo and add new key(s).

The ECU menu is totally different


578020

[castin]

- Read identification
- Reset to virgin & learn keys (follow the procedure)
if all done and the car is starting
- Erase all remotes and learn REMOTE #1

3-4 min easy job like the oders, no matter the the engine
It's amazing tool, im wait for personaly test this function :D EFFI hawe, but im try many times and never worked. Now it's mutch beter and faster :D.
Jodge You try with used remote with immo (id33)?

[castin]

Hello
OK , & what tool you use to read HFM ?
thanks
UPA-S orginal - read fast end easy.

[jodge]

It's amazing tool, im wait for personaly test this function :D EFFI hawe, but im try many times and never worked. Now it's mutch beter and faster :D.
Jodge You try with used remote with immo (id33)?

yes i made pics too :)

578025

[bocaje]

Hello sorry to go Back to my issue.
Some pics.
Any help thanks.https://uploads.tapatalk-cdn.com/20181217/1415e40bae17abb5b062f213750d7558.jpghttps://uploads.tapatalk-cdn.com/20181217/c404f7f03b4ab311a94cececc8ba5411.jpg


Enviado do meu iPhone usando o Tapatalk

[jodge]

and did you pushed that button? Right bottom corner "enable read pin (2015+)"

[TERMINATOR1000]

Hello sorry to go Back to my issue.
Some pics.
Any help thanks.https://uploads.tapatalk-cdn.com/20181217/1415e40bae17abb5b062f213750d7558.jpghttps://uploads.tapatalk-cdn.com/20181217/c404f7f03b4ab311a94cececc8ba5411.jpg


Enviado do meu iPhone usando o Tapatalk

just push " Enable read PIN (2015+) " and post picture of your problem !
for the moment all is OK , failed to access reading ISK
Insert an valid card and just push " Enable read PIN (2015+) "

[TERMINATOR1000]

and did you pushed that button? Right bottom corner "enable read pin (2015+)"

no ! you see any log of this command ???

[Catalizator]

follow the requirements.

[TERMINATOR1000]

follow the requirements.

It's not an AKL situation , just additional card on 2015+ car

[bocaje]

and did you pushed that button? Right bottom corner "enable read pin (2015+)"

Yes yes. The inf is the car software do not Need This after 2015 enable...


Enviado do meu iPhone usando o Tapatalk

[bocaje]

no ! you see any log of this command ???

Of corse i did ... is says This car does not need no plus 2015 software car


Enviado do meu iPhone usando o Tapatalk

[TERMINATOR1000]

Of corse i did ... is says This car does not need no plus 2015 software car


Enviado do meu iPhone usando o Tapatalk

made an video , i understand nothing of your stories !

[castin]

After 2015 need one working card OR need read HFM and load dump. Its simple and easy - working 100%.

[bocaje]

After 2015 need one working card OR need read HFM and load dump. Its simple and easy - working 100%.


Ok thanks for the help.
For terrminator No video needed mate i think you understand what i told im not stupid and i try all the options....

Conclusion not all the clios IV possible via obd still if card available….im also contacted the seller if any inf ill tell.

thanks for the helpers

[ponty]

I have exactly the same issue. 2015 Captur. Tried to add card using v2.75. Same issue. Reading isk FAILED. Tried all options. Not lost Card. Only wanted to add card.....

[Louislesinge]

Hi,

I have exactly the same issue. 2015 Captur. Tried to add card using v2.75. Same issue. Reading isk FAILED. Tried all options. Not lost Card. Only wanted to add card.....
Did you update to 2.77 and test again?
Greetings,

[castin]

ClioIV FL/Captur its the same system. After 2015 AKL (all key lost) must hawe dump from HFM. Its cleary info on product site and software info. Meybe next update or after add Megane IV/Espace V option.
If add card captur after 2015 not work, then must wait for update :).

[bocaje]

ClioIV FL/Captur its the same system. After 2015 AKL (all key lost) must hawe dump from HFM. Its cleary info on product site and software info. Meybe next update or after add Megane IV/Espace V option.
If add card captur after 2015 not work, then must wait for update :).

Correcting you clio 2015 one working key ... no Isk read even with enable pin.



Enviado do meu iPhone usando o Tapatalk

[jodge]

Correcting you clio 2015 one working key ... no Isk read even with enable pin.



Enviado do meu iPhone usando o Tapatalk

It seems it's something new sw and the ecu too doesn't support yet. Contact the support or dump the HFM or wait for update or leave it.

[TERMINATOR1000]

I have exactly the same issue. 2015 Captur. Tried to add card using v2.75. Same issue. Reading isk FAILED. Tried all options. Not lost Card. Only wanted to add card.....


all is OK , add an supplementary card not possible
before push button "key programming" , need RESET PIN CODE PROTECTION with push button "enable read PIN code 2015 +" , if you don't do it always same issue ISK failed ....

Or simply use ORANGE 5 to read NEC 70f3633 and sell card 50€ upper price

[TERMINATOR1000]

Meybe next update or after add Megane IV/Espace V option.
.

Not possible , need online procedure ( fvdi & zedfull ) + make dealer key !!!!

no server available and no tag key tool exist , this is the limit of Renault EcuTool , just an immo bypass by OBD2 is possible to theft the cars

[castin]

Not possible , need online procedure ( fvdi & zedfull ) + make dealer key !!!!

no server available and no tag key tool exist , this is the limit of Renault EcuTool , just an immo bypass by OBD2 is possible to theft the cars

Meybe yes, meybe no - im wait. Abrites hawe new update fir meg iv, scenic v.

[TERMINATOR1000]

Meybe yes, meybe no - im wait. Abrites hawe new update fir meg iv, scenic v.

IS IMPOSSIBLE , NEED AN DEALER KEY & tag key to pré-code ISK + ONLINE CONNECTION to calculate ISK ....
maybe ( sure ! ) AES keys for trafic 3 , sandero 2 , twingo 3

[kronk92]

Today i was tested the Clio II sagem key learn. (AKL) The key is used (from scrapyard), 1 button id33 tp and remote on one pcb. All ok :) Finally bcose i really hate to take out those sagem immo-s.
I love this tool :)

Hi jodge,
I tried the new update on a Renault Master 2000 with immobox blue connectore, it read it ok reset ok but when learning transponder fail i tried so many times no way, finished by taking the immobox and program transponder by tango ok
clio 2 ph1 with Bmt, reset immo ok transponder programmed ok then the red light goes out as the key is reconized but it still doesn't start, first i thought a problem with the car but no, in diag parameters shows immobilizer active
so for the moment i think that there is some problems with this new function :(

[jodge]

Hi jodge,
I tried the new update on a Renault Master 2000 with immobox blue connectore, it read it ok reset ok but when learning transponder fail i tried so many times no way, finished by taking the immobox and program transponder by tango ok
clio 2 ph1 with Bmt, reset immo ok transponder programmed ok then the red light goes out as the key is reconized but it still doesn't start, first i thought a problem with the car but no, in diag parameters shows immobilizer active
so for the moment i think that there is some problems with this new function :(

For the master dunno sorry, about the clios check the ECU type (beside the battery) and try the followig

!!!!!!! It's just an exapmle always choose the correct ecu type!!!!!!!!!


ECU is Safir 2
Learn the keys immo lights is going off
After that choose the Safir 2 and clear the IMMO
ignition off
ignition on and the immobox auto re-learning
ignition off
start the car

my guess is when you laern the keys the ECU Tool put the immobox in virgin state and sometimes erasing the synco-ecu whatever stuff

[kronk92]

that is what i think too, the syncro is lost, ecu is DCU3R, i will have to fix this mess just to say that i think this function doesn't work 100% it may give you more work than it would save you

[jodge]

dunno you are expecting a perfect tool? :D
if i have to choose between to take out those digusting horror sagem immobox or pushing two more button in this program it will be a quick decision

[steelcityuk]

I'd like to know if this tool can solve my problem. I've replaced my faulty Scenic 3 BCM with one from another car, it's the same part number. I've virginized it with Renolink but Clip won't allow me to program the keys back to it and Renolink doesn't support Scenic 3 so will the Renault ECU tool be able to do it? If not are there any other simple ways of doing this?

Thanks.

[jodge]

MEGANE III / SCENIC III (2009-2015) - Card Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III (2009-2015) - Classical Key Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learn BCM / ECM / ESCL in protected mode

[Catalizator]

I'd like to know if this tool can solve my problem. I've replaced my faulty Scenic 3 BCM with one from another car, it's the same part number. I've virginized it with Renolink but Clip won't allow me to program the keys back to it and Renolink doesn't support Scenic 3 so will the Renault ECU tool be able to do it? If not are there any other simple ways of doing this?

Thanks.

no pin code key card no write.

reprog 91% ?
you must do virgine bcm, and program canclip ... out in code. key card program canclip
I did it and I did it

[steelcityuk]

MEGANE III / SCENIC III (2009-2015) - Card Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III (2009-2015) - Classical Key Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learn BCM / ECM / ESCL in protected mode



Hi. I'm afraid I don't have much experience with this stuff. I noticed that the device claims it can code cards to the Scenic 3 / Megane 3 but wasn't sure it could do it after replacing the BCM from another vehicle. I could pay to have it fixed but I'd like to learn something if possible rather than just buy my way out.

Thanks.

Steve.

[steelcityuk]

no pin code key card no write.

reprog 91% ?
you must do wirgine bcm, and program canclip ... out in code. key card program canclip
I did it and I did it

Hi.

Sorry but I don't have any experience with this stuff so I'm asking for help/advice rather than just paying for someone to fix it for me. I don't mind paying but I'd like to learn from my mistake if possible. Yes the original BCM was broken trying to reprogram it and now it can't be virginised or reprogrammed so I bought a replacement BCM with the same part number. The Renolink claims to have virginised the replacement BCM but Clip won't allow me to add keys to it. I don't want to try reprogramming it same as the original in case it wrecks the replacement.

Thanks.

Steve.

[Catalizator]

instal virgin bcm in auto
connect can clip, open bcm....repair mode....parameter input bcm....can clip write incoge...generate diller outcode...
everything is simple....follow the instructions
good luck

[lagaffe]

Hi,
Why do you think renolink can't do your bcm learning?
591007
Can you read your old bcm? You need only isk or pin

[Catalizator]

topic for discussion

https://www.digital-kaos.co.uk/forums/showthread.php/716132-Renault-Bcm-reprogram

[Catalizator]

i think you misunderstanding something. The sagem immobox not related with the engine type and the key programming is just erasing the immo and add new key(s).

The ECU menu is totally different


578020

hi
not work. no connect :(
what are the possible reasons?
can clip yes, connect and read bmt

did you connect by obd?

[dedz]

I tryed to make key with ecu tool not work for clio 2 ph 1 maybe i don t know how it work

Envoyé de mon SM-G935F en utilisant Tapatalk

[Catalizator]

I tryed to make key with ecu tool not work for clio 2 ph 1 maybe i don t know how it work

Envoyé de mon SM-G935F en utilisant Tapatalk

hello,do you connect to bmt?

[dedz]

Yes bo probleme

Envoyé de mon SM-G935F en utilisant Tapatalk

[martin1234]

looking for fvdi software running the renault version 7.4 ?
thanks

[R2D2R2]

looking for fvdi software running the renault version 7.4 ?
thanks

Not the topic !

[steelcityuk]

MEGANE III / SCENIC III (2009-2015) - Card Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III (2009-2015) - Classical Key Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learn BCM / ECM / ESCL in protected mode



Sorry if this is a stupid question but what is protected mode?

Thanks.

[szengen]

how much can you spend?

[Catalizator]

hi. Who checked the work of the new function?

[mikroel]

post new sw and we will check:tears_of_joy:

[sdnatlst]

is this same as HITAG 3 for trafic 3 vans, 2014+ ??

would love someone to test this on PIN and key LEARN, as i will buy this tool if it now has that functions

i was told JULY for the update to be able to do this so was waiting!

[ghostrider72]

Will be doing 3 vans Monday-Tuesday so will confirm that

[ciprishor]

What is the price for this tool? Does it need a special hardware?

[rob h]

About 700eur, comes with interface.

[dedz]

You can find it on ebay 780 eu

Envoyé de mon SM-G935F en utilisant Tapatalk

[sdnatlst]

Will be doing 3 vans Monday-Tuesday so will confirm that


waiting with anticipation for the results :D

[keyprogramming]

Latest update today for 2012+ Dacia


LOGAN, SANDERO, DOKKER, SYMBOL, DUSTER (2012+) - Key/ECM/BCM learning, Reset to VIRGIN, Read DataFlash, Change VIN (NEW!)

[lem2]

Dacia Logan 2018 add key - success

[sdnatlst]

does that use same key as Trafic 3 2015 (hitag AES) ?

[RIMKACHIP]

does that use same key as Trafic 3 2015 (hitag AES) ?

I will test tomorrow on trafic 2015 but i don’t think it will work. Because with lonsdor not working with dacia menu but work fine with trafic 4A menu. Twingo3 and smart453 work fine with Lonsdor trafic 4 menu too. Read pincode with lonsdor is long (15 minutes).


Envoyé de mon iPhone en utilisant Tapatalk

[sdnatlst]

I will test tomorrow on trafic 2015 but i don’t think it will work. Because with lonsdor not working with dacia menu but work fine with trafic 4A menu. Twingo3 and smart453 work fine with Lonsdor trafic 4 menu too. Read pincode with lonsdor is long (15 minutes).


Envoyé de mon iPhone en utilisant Tapatalk

thanks!!, yes i dont want to risk Lonsdor on Trafic 3, due to writing data to IMMO! sounds dangerous, rather a good tool like Renault ECU tool to support it!

[RIMKACHIP]

Hi !! Not working on Renault trafic 2017 only reference, vin and number of keys is good but read pincode not working https://uploads.tapatalk-cdn.com/20190327/6a8fe872e12593a37c416d152bf3f599.jpg


Envoyé de mon iPhone en utilisant Tapatalk

[Catalizator]

if added, then programming is possible. but on another software.
need to wait for updates

[RIMKACHIP]

Yes i think next version. Its good way for hitag aes system.


Envoyé de mon iPhone en utilisant Tapatalk

[bocaje]

Hello.
Other tools already Programming megane IV key cards.... online thanks... Is It the end to renault ecu tool in key programing??
Regards


Enviado do meu iPhone usando o Tapatalk

[godfathertre]

I do not think so the developer has lots of experience you will get new features soon this is a good tool later Renault 2015 on very hard to crack so be patient.

[drugowaz]

If anyone need this tools contact me,developer always working on new models.

[castin]

CanTool - 100% happy :D. Now we wait for Scenic V card support, Megane IV :D.

[Pjespace]

Hello Terminator, i just wanted to ask if I read the eeprom from the Virginised UCH. Can I Use it to programme the UCH by renault key extractor.
Thank you

[Pjespace]

Hi all, i need some assistance with the renolink tool any help will be appreciated. I have immobiliser issue on my 2005 espace.

[jodge]

Hi all, i need some assistance with the renolink tool any help will be appreciated. I have immobiliser issue on my 2005 espace.

Renolink is a totally different tool

i guess your problem is the crappy card reader -as usual- if you have ECU tool you can test it with the prog. My bet is on the second swith lever is broken.

[mikroel]

If anyone need this tools contact me,developer always working on new models. price?

Sent from my HONOR 8X

[dedz]

I sell it 700 euro if need i have many piecehttps://uploads.tapatalk-cdn.com/20190505/82095d2acafdcc23c60ed280b142e6ae.jpg

Envoyé de mon SM-G935F en utilisant Tapatalk

[Pjespace]

Renolink is a totally different tool

i guess your problem is the crappy card reader -as usual- if you have ECU tool you can test it with the prog. My bet is on the second swith lever is broken.

thanks for reply.

i virginsed the system accidentally and then managed to reprogramme the UCH using CLIP v184. however the BCM is still blank and i need the immobiliser code to programme the BCM as ISK is 000000000000 and pincode is FFFFFFFFFFFF. it doesnt generate the correct incode using the Reanult code extractor 1 or 2.

[Pjespace]

also my card reader doesnt have any switches i have key less entry system

[mikroel]

I sell it 700 euro if need i have many piecehttps://uploads.tapatalk-cdn.com/20190505/82095d2acafdcc23c60ed280b142e6ae.jpg

Envoyé de mon SM-G935F en utilisant Tapatalkthanks mate but your offer is too high, I have another offer for 550eur.



Sent from my HONOR 8X

[R2D2R2]

impossible it's factory price

[Pjespace]

Anyone on here with experience on Renolink. The sodding thing is in French and I don't know any French hahaha

[godfathertre]

better post this in the renolink section

[mikroel]

impossible it's factory priceI don't know what is factory price but Of course it is possible [emoji6]

Maybe that supplier has better prices from producer or his marge is low.

Sent from my HONOR 8X

[bocaje]

Lets face it the most buyers purchase this toll for the good key learnig and safe.... at this time not even a clio iv fase 2 can be Card added so the claimed valeu with a lot of upgrade até going down by other Tools in this fild with online megane iv key learning for example
Regards


Enviado do meu iPhone usando o Tapatalk

[drugowaz]

If anyone need this tool contact me. Much better price.

[R2D2R2]

paypal fee & shiping cost is not free , 40€ to add for real security transaction

[Catalizator]

Lets face it the most buyers purchase this toll for the good key learnig and safe.... at this time not even a clio iv fase 2 can be Card added so the claimed valeu with a lot of upgrade até going down by other Tools in this fild with online megane iv key learning for example
Regards


Enviado do meu iPhone usando o Tapatalk

There is no perfect tool that works without with all car models. ret has an affordable price and many functions, for which I choose it .....

[godfathertre]

Nissan Primaster 2004
The customer put
In a second hand ecu
I need to make virgin
With Renault ecu tool
What is the procedure
Once virginised will
I need new keys and how long
Procedure takes if anybody done
This on this van or vivaro
Equivalent any help.

[castin]

Nissan Primaster 2004
The customer put
In a second hand ecu
I need to make virgin
With Renault ecu tool
What is the procedure
Once virginised will
I need new keys and how long
Procedure takes if anybody done
This on this van or vivaro
Equivalent any help.
Im only program key - 30sek job done.

[godfathertre]

Programmed key okay
Reset uch to virgin
Wrote vin to car not start
Ignition light on red solid
Light if anybody can help
Checked key is programmed okay.

[Catalizator]

you need to program ecm. in ret can do it with cars released after 2007

[solene2510]

Hello,

My husband tried to program a Renault Scenic 3 2012 key card, but he had a problem. He had a key that worked for the doors open and locked and start the car. He wanted 2 extra cards. He tried 2 cards 1 with the PCF 7952 and 1 with the PCF 7941, the programming went well.
the original key still works (opening and closing the doors and starting the car) and the PCF 7952. The PCF 7941 does not work to open and close the doors.
He repeated the operation with another PCF 7952 card, thinking that the PCF 7941 card might be defective, the programming went well. The 3 cards worked to start the car but only the original opened and closed the doors.
He redid a program but after, no more cards opened or closed the doors, even the original one, but the three started the car.

Has anyone ever had this problem and would have a solution to help him ?

Thanks a lot
Good evening
Has anyone ever had this problem and would have a solution to help them

[rob h]

The original key, whas that one with keyless go function?

[Catalizator]

Hello,

My husband tried to program a Renault Scenic 3 2012 key card, but he had a problem. He had a key that worked for the doors open and locked and start the car. He wanted 2 extra cards. He tried 2 cards 1 with the PCF 7952 and 1 with the PCF 7941, the programming went well.
the original key still works (opening and closing the doors and starting the car) and the PCF 7952. The PCF 7941 does not work to open and close the doors.
He repeated the operation with another PCF 7952 card, thinking that the PCF 7941 card might be defective, the programming went well. The 3 cards worked to start the car but only the original opened and closed the doors.
He redid a program but after, no more cards opened or closed the doors, even the original one, but the three started the car.

Has anyone ever had this problem and would have a solution to help him ?

Thanks a lot
Good evening
Has anyone ever had this problem and would have a solution to help them


keycards were chosen not for the scenic, perhaps for koleos and clio ... they have different precoding rem training.
for start is suitable, and opening the door does not work. I happened so, so I think you have the same

[R2D2R2]

Hello,

My husband tried to program a Renault Scenic 3 2012 key card, but he had a problem. He had a key that worked for the doors open and locked and start the car. He wanted 2 extra cards. He tried 2 cards 1 with the PCF 7952 and 1 with the PCF 7941, the programming went well.
the original key still works (opening and closing the doors and starting the car) and the PCF 7952. The PCF 7941 does not work to open and close the doors.
He repeated the operation with another PCF 7952 card, thinking that the PCF 7941 card might be defective, the programming went well. The 3 cards worked to start the car but only the original opened and closed the doors.
He redid a program but after, no more cards opened or closed the doors, even the original one, but the three started the car.

Has anyone ever had this problem and would have a solution to help him ?

Thanks a lot
Good evening
Has anyone ever had this problem and would have a solution to help them

what is the rapport with Renault Ecu Tool ?
This tool is perfect , no critic accepted about it !
Made another topic

[hitechservis]

This is two diferent card...i have this situation..ithink original was pcf7947 and i don't know this info i programe card with pcf7952 that card start car but remize not work...i open both card and i se that is different if the look same...next time when customer came i will first open original card(if not work((start car)) and are with my eyes what is inside if it's working just read with VVDI for example.

[solene2510]

The original key, whas that one with keyless go function?


Hello ,
Thanks for help
No , the original key don't keyless function. The car don't have this function

[solene2510]

what is the rapport with Renault Ecu Tool ?
This tool is perfect , no critic accepted about it !
Made another topic


Hello,

I do not criticize. It is a very good material that my husband often uses. I say he had a problem losing the original key when closing doors and does not know what he did wrong and how to fix it.

thanks

[solene2510]

keycards were chosen not for the scenic, perhaps for koleos and clio ... they have different precoding rem training.
for start is suitable, and opening the door does not work. I happened so, so I think you have the same

Hello

Thanks for help.
Did you have the same problem? Have you also lost the opening and closing of the doors on the original key that worked very well initially?

[Catalizator]

Hello

Thanks for help.
Did you have the same problem? Have you also lost the opening and closing of the doors on the original key that worked very well initially?


Yes, it was like that when I wrote down the wrong key. try to write one original and the opening should work

[solene2510]

Yes, it was like that when I wrote down the wrong key. try to write one original and the opening should work

Thanks. Ok my husband will order an original card and try to write.

[castin]

Renault Master 2016 - all key lost. What device spare key?

[HeXeN]

MEGANE III 2016 FAIL

[drugowaz]

Developer now working on this system "bug" .its not fault of tool. On this year system its locked reading by obd. Same as clio from 2015.
In future updates this problem will be solved.
Just for akl probably will need read nec from bcm on bench too.
If anyone need this tool you can contact me private.

[sdnatlst]

when is vivaro/trafic 2014+ update coming :(

[florinelxxl]

I know it is a good man ,, not a spy, lives close to me,

[Catalizator]

Koleos 1on 2, Are you planning to add an accident data cleaning module?

[Catalizator]

I have a problem. When programming BCM renault megane, the pin code input does not match. bcm made virgin, writes and turns on the ignition, but it turns out that the pin code will save from the used block. See photo log. Can any of the developers see and together we will fix

[gogu]

hello.the keycard that you use belongs to the car?do you want only to change the BCM?

[Catalizator]

Yes, both cards from the car. only bcm changes

[bocaje]

Since this tool is getting behind in terms of key programing and will not geral megane 4 key programing because maybe need online and tool does not work online ar leasing they could get the smart 453 since its a renault sistem ....




Enviado do meu iPhone usando o Tapatalk

[drugowaz]

No need any online. Online uses only china tools,they steal other tools solutions,retranslating posibility to program through server

[godfathertre]

Does anyone knows when some of later vehicles added to this since the last few updates have been quite poor.

[godfathertre]

I have a Renault Megane 2015 to do a spare Keycard the customer has one working
Key is Renault ecu tool be able to add a spare key the vehicle has one working key
And what is the right part number for the Keycard I have done a 2012 no problem before what if had software upgrade is it okay to program.

[HeXeN]

2015 yes
2016 no
normal 4 button card pcf7952

[arteman10]

Hello, everyone. Faced such problem - brought the airbag continental block with R7F7010133 , the car nearby is not connected the block on a table and the identification field saw that Crash Recorded: YES, Replace Comp: Yes. I pressed the Erase Crash Record button and got Crash Recorded: NO, Replace Comp: NO , then unplugged the power from the unit and plugged in again and the status was already Crash Recorded: NO, Replace Comp: Yes. Re-crash is not erased, which means Replace Comp.:YES and how to remove this error?
Thanks in advance for the answer.

[Catalizator]

Are you sure that the unit was not opened and did not rewrite the eeprom?

connect to the car and clip unlock the airbag security unit

[gogu]

Hello.can you write the reference of the parts?

Sent from my SM-N950F using Tapatalk

[gogu]

I think that you airbag it is with MCU SPC560 not MCU R7F7010133

Sent from my SM-N950F using Tapatalk

[arteman10]

Are you sure that the unit was not opened and did not rewrite the eeprom?
I'm sure one hundred percent that no one copied anything in the block


connect to the car and clip unlock the airbag security unit
Is the verified information that the clip will solve this problem? Which means Replace Comp. what block should be replaced by another, or the fact that it was blocked because of the crash

[arteman10]

I think that you airbag it is with MCU SPC560 not MCU R7F7010133

Sent from my SM-N950F using Tapatalk
I opened the unit and CPU labeling R7F7010133.

[Catalizator]

I worked with clio, can clip unblocked and com replacement disappeared

[godfathertre]

has anybody programmed any additional spare keycard to Renault capture 2015 can Renault ecu tool do this thank you and what card for this.

[godfathertre]

what is happening with updates with this tool has been 45 days no updates does anyone know when we can get later Renault Cars and Vans with this tool has latest

updates they have been poor .

[drugowaz]

1 update was recently.
Developer now has personal work and vacation from new updates.
Talked to him 2 week ago

[Catalizator]

There is reliable information about the development of a new project. maybe the blue box may be left without support :)

[drugowaz]

Who told you? Grandma?

[Catalizator]

Who told you? Grandma?

https://car-immo.com/showthread.php/2543-Renault-CAN-K-line-ECU-Tool/page2

[drugowaz]

I dont see here any trusted info. Only one post about nothing

[ghostrider72]

Tbh... I’ve been told the same from my local distributor. So it must be something developing

[Catalizator]

renault megane 2015 year key card not programmer....
very sorry :(

[drugowaz]

Because 2015 is like clio 4 ,crypted. This version in development now.

[godfathertre]

it has been 2 months now no updates i hope the developer will bring more updates for this tool and not bring new tool out and no support for this tool has latest

updates

have been very poor no new stuff Renault ECU Tool V2.88 (http://www.immo-tools.lt/site/files/failai/Renault_ECU_Tool.rar)
(updated 5/6/2019)

[RIMKACHIP]

it has been 2 months now no updates i hope the developer will bring more updates for this tool and not bring new tool out and no support for this tool has latest

updates

have been very poor no new stuff Renault ECU Tool V2.88 (http://www.immo-tools.lt/site/files/failai/Renault_ECU_Tool.rar)
(updated 5/6/2019)

No just only 1 month 2.88 is from 5th July not 5th June it’s an error of date.


Envoyé de mon iPhone en utilisant Tapatalk

[RIMKACHIP]

renault megane 2015 year key card not programmer....
very sorry :(

Megane scénic 2015 card programming works fine. Are you sure you have selected good line ?


Envoyé de mon iPhone en utilisant Tapatalk

[RIMKACHIP]

Because 2015 is like clio 4 ,crypted. This version in development now.

Clio captur 2015-2019 works fine just enable protection with working card. Not in development. Work since last year.


Envoyé de mon iPhone en utilisant Tapatalk

[Catalizator]

Megane scénic 2015 card programming works fine. Are you sure you have selected good line ?


Envoyé de mon iPhone en utilisant Tapatalk

sure! I can connect the device to the car. if there is no reading then it is not and there is no place to take

[looking77]

Clio captur 2015-2019 works fine just enable protection with working card. Not in development. Work since last year.



Please more info...

[RIMKACHIP]

Please more info...

Just read instruction please.


Envoyé de mon iPhone en utilisant Tapatalk

[p1et]

When programming card to Clio IV / Captur it will show me what is the pin code or the procedure is automatic and it will not display pin code?

[Catalizator]

pin and isk read and show in a dialog box

[p1et]

Ok and what about Clio / Captur 2015+ ? When I load D-Flash it will also show me pincode? I'm just asking cause I need to learn new (used) HFM to vehicle, I have D-Flash of original HFM and need to know pin code but seems noone is able to retrive it just from file if I put here. I'm now planning to buy Renault Ecu Tool

[Catalizator]

connect in obd2, open program...open dflash, press reag identification/pincode.everything is read and counted

[p1et]

connect in obd2, open program...open dflash, press reag identification/pincode.everything is read and counted

Friend, please clear your PM inbox

[Catalizator]

what to do when a new ecm software is detected, send to the developer’s email, as indicated in the status log?

[godfathertre]

I have a feeling this tool will not
Longer be updated there is not
Much new stuff been developed
Maybe we will see
Renault ecu tool and io terminal
Tablet coming soon with latest
Renault and new price.