MK60 ABS long coding for members

[vagva]

Hi
I am really new to this Forum , So I can provide to member Long coding for ABS for VAG MK60
Always send me VIN , you Must :
read VIN from 17- instrument
CAR Brand and info
and will send you long Coding Free
Thanks to you All

[luis12]

Only for curiosity, do you use any calculator or online, thanks.

[vagva]

Only for curiosity, do you use any calculator or online, thanks.
Hi
I am using Brain solution , and it is always save me and helped me , so if you need any help just put here your vin from the instrument and car type please
Thanks

[vagva]

Only for curiosity, do you use any calculator or online, thanks.
Hi
I am using Brain solution , and it is always save me and helped me , so if you need any help just put here your vin from the instrument and car type please
Thanks

[pegy]

TMBKT61Z7A2110615

[Gavra]

Hi
I am using Brain solution , and it is always save me and helped me , so if you need any help just put here your vin from the instrument and car type please
Thanks
I hope You wont mind then to use Your solution on ALL modules ?! There is some Golf 7 with aftermarket lights and upgrades that need someone who can calculate with brain as no calculator is available for them ........ Thank you.

[vagva]

TMBKT61Z7A2110615
car type please ?

[vagva]

TMBKT61Z7A2110615
Here is your Long coding :
113B201C092300FA881104E5901E0051340000

[pegy]

Thank working -0

[pegy]

PLS--- Octavia -ESP -MK60EC1 -1K0907379AN-- vin -- TMBCS61Z0AC000815

resolved

[smokinjoe]

please help with the following

MK60EC1
1K0 907 379 AH
TMBBD73T6A9025364
Skoda superb

thanks.

[vagva]

please help with the following

MK60EC1
1K0 907 379 AH
TMBBD73T6A9025364
Skoda superb

thanks.
HER is your long coding
163B600D212400FF680E0611841D0080B100
Regards

[smokinjoe]

HER is your long coding
163B600D212400FF680E0611841D0080B100
Regards

tried but it says coding is incorrect length and if i add 00 it says coding rejected,any ideas please

thanks

[vagva]

Hi
Will help you , but I am busy later this night will send you the long coding

[smokinjoe]

thanks i appreciate it and here is a copy of log if it helps you

375628

[vagva]

tried but it says coding is incorrect length and if i add 00 it says coding rejected,any ideas please

thanks
Hi
Try this long coding :
843d1609222401FF0d0Ee5eA1b1D41ab00


if it is correct please dont forget THANKS Buttons

[smokinjoe]

Hi
Try this long coding :
843d1609222401FF0d0Ee5eA1b1D41ab00


if it is correct please dont forget THANKS Buttons

not working,coding needs to be 19 bytes so added 00 00 but coding rejected.

[vagva]

hi
Is it right hand or left?

[smokinjoe]

its right hand drive i sent a log too in post 15

[smokinjoe]

Had to bight the bullet on this one and bring it to the dealers but if it helps anyone out the correct coding was as follows

86 3D 40 16 09 24 00 FF 61 0E 02 EA 90 1D 00 81 30 00 00

Thanks to all.

[FALCON30]

Please help with long coding ABS/ESP
Audi A3 2011
MK60EC1
VIN WAUZZZ8P8CA097396
left hand

[FALCON30]

No one can help?

[tiguan]

Please help with long coding ABS/ESP

Skoda Octavia 2011, 1.6 TDI
MK60EC1
1K0 907 379 AT
VIN: TMBHT61Z0B8008078
Left Hand


thanks you.

[aeroyas]

hi freind, please i need your help to find long coding for VW GOLF VI abs, year 2009, please can you help me?

car : VW GOLF VI
year : 2009
RIGHT HAND DRIVE
AUTOMATIC TRANSMISSION
TIRES :16
VIN : WVWZZZ1KZ9W437949
ABS :1K0 907 379 AE MK60 EC1 H35 0109

thank's a lot in advance

best regard's

[aeroyas]

sorry i forgot engine type : CBD

regard's

[aeroyas]

can you help me please?

[pietroecu]

Ciao bmw serie 1 sui telaio WBAUH51090E658941

[pietroecu]

Bmw serie 1 e87 year 2010 VIN WBAUH51090E658941 help me please for coding vin

[Gavra]

VW and BMW coding are NOT same......open your thread please with all info ,and what do you need and somebody will help you.

[wojciech300]

aeroyas try 114B200C09250001881404E890220051340000

[wojciech300]

hi freind, please i need your help to find long coding for VW GOLF VI abs, year 2009, please can you help me?

car : VW GOLF VI
year : 2009
RIGHT HAND DRIVE
AUTOMATIC TRANSMISSION
TIRES :16
VIN : WVWZZZ1KZ9W437949
ABS :1K0 907 379 AE MK60 EC1 H35 0109

thank's a lot in advance

best regard's

Try :114B200C09250001881404E890220051340000

[DiagnosBoy]

Volkswagen Caddy 2011
1.6 TDI Right Hand Drive Caye Engine
Start/Stop
Vin: WV1ZZZ2KZCX050264
ABS 1K0907379BJ

Thank You

[vagva]

Volkswagen Caddy 2011
1.6 TDI Right Hand Drive Caye Engine
Start/Stop
Vin: WV1ZZZ2KZCX050264
ABS 1K0907379BJ

Thank You
Hi
Here is your Long coding: 423C400D092703FA420D02EA901DC041300000
press thanks and like please

[vagva]

Please help with long coding ABS/ESP

Skoda Octavia 2011, 1.6 TDI
MK60EC1
1K0 907 379 AT
VIN: TMBHT61Z0B8008078
Left Hand


thanks you.
Hi
here is your Long Coding : 113B201C09220002880B04EB90210041340000
press thanks and like please

[kitioni]

Please help with long coding ABS/ESP

VW GOLF 6 !,6TDI
ESP MK60EC1
1K0907379BJ
VIN: WVWZZZ1KZCP025582
Left Hand

[vagva]

Please help with long coding ABS/ESP

VW GOLF 6 !,6TDI
ESP MK60EC1
1K0907379BJ
VIN: WVWZZZ1KZCP025582
Left Hand
hI
Here is your long coding :
243B400D092400FF241002EC901B00403100
press thanks and like please

[tellfaia]

1K0-907-379-AE
Monday,25,July,2016,12:01:47:32264
VCDS Version: Release 11.11.3
Address 25: Immobilizer
Control Module Part Number: 8P0 920 932 A
Component and/or Version: KOMBIINSTR. VDO H15 0820
Software Coding:
Work Shop Code: WSC 00000
VCID: 32610411AD34409

Advanced Identification
Serial number: AUX7Z0H5FN7073
Identification: VDD-024
Revision: D0H15004
Date: 07.06.08
Test stand number: 7601
Manufacturer number: 0255
Misc.
Hardware number: 8P0 920 932 A
Lot Number:
Type Lock: VDD-
Immo Challenge: E1 49 54 F7
Car Info
Chassis Number: WAUZZZ8P99A002997
VCDS Info:
Labels: 1K0-920-xxx-25.clb
Its a audi a3 auto left had drive can you provide me the long coding

Br Pedro

[tellfaia]

anyone:) please

[hid3]

What engine? (liter/fuel type)
Standard brakes?

[tellfaia]

thanxs for your help but brain solution works:)
case closed:)

[x-tech]

Good afternoon, I need the long code of the ABS of a VW GOL
vin code: 9BWAA45UXFP019777
model part: 1S0614117S

PLEASE

[auto12volts]

Hi, i need long code for Esp mk60ec1 from golf 6.
vin WVWZZZ1KZAW361133
engine 1.6 tdi cayc
left hand drive
1k0907379 bj.
Please

[vagva]

Hi, i need long code for Esp mk60ec1 from golf 6.
vin WVWZZZ1KZAW361133
engine 1.6 tdi cayc
left hand drive
1k0907379 bj.
Please

Here is your long coding
213B400D092800FB840C02E7901C0041B100
if is correct please press thanks and rep
Thanks

[auto12volts]

[QUOTE=vagva;2822168]Here is your long coding
213B400D092800FB840C02E7901C0041B100
if is correct please press thanks and rep
Thanks[/QUOTE
Thanks, it?s working...

[amrif]

hello,
GOLF 1.9TDI
LHD W V W ZZZ1KZ9W030527

THX

[hid3]

hello,
GOLF 1.9TDI
LHD W V W ZZZ1KZ9W030527

THX

Hello amrif,

try this coding:
113B200D092500FA881004E690200041310000

[SPEED133]

hi mate I am also fresh here and have a big problem with my golf mk5 2008 need to long coding for abs esp
mk60 ec1
1k0907379ad
vin no wvwzzz1kz9w126047
if you could help would be great

[SPEED133]

hi mate I am also fresh here and have a big problem with my golf mk5 2008 need to long coding for abs esp
mk60 ec1
1k0907379ad
vin no wvwzzz1kz9w126047
if you could help would be great
thanks in advance

[hid3]

Hello Speed,

assuming yours is LHD and 1.9 TDI too, try this coding:
113B200C09240000880B04E890200041310000

Let me know if:
-yours is RHD
-The engine is not 1.9 TDI
-your golf is 4motion version
-if you know brake system PR numers (should be in your service booklet or under the trunk carpet and should begin with "1", e.g. 1KZ, 1ZF, 1KD, etc...)

In that case I could provide a coding which would be more accurate to your car.

[hid3]

For everyone, posting coding requests - be sure to include as much inforamtion as you have about the car.
This is what's required:

1. ABS module part number (the part number which is labelled on the ECU part, not the motor part number)
2. VIN
3. Exact model of the car
4. Left hand drive (LHD) or right hand drive (RHD) model
5. Engine type (gas or diesel), power output and displacement. Engine code can be provided instead if known.
6. 4Motion/4WD version or FWD
7. Is there any start/stop ("eco"/"bluemotion"/etc) system installed in the car?
8. Is there any kind of TPMS? If yes, then what kind of TPMS - indirect ABS based (no sensors in each wheel) or direct system which uses sensors inside the wheels?
9. Does the car have ASR/ESP off buttons (in the center console)?
10. "Hill hold" function. Do you want it to be activated if possible?

If you provide all the information requested, then you can expect a fully correct coding which would be the same as it would be coded in the factory. All the information is important if you want to have a fully and in-time working ESP system.

Instead of all of the above you may just provide full car's autoscan and indicate if it's LHD or RHD model. That should be sufficient.

Once you get a coding, please note the important points:
(1) you will need to code the module and adapt all the related sensors in one ingition cycle. Otherwise, the coding will revert back to zeroes;
(2) I strongly suggest doing the adaptations of the sensors on ideally flat surface. Also, when adapting steering wheel sensor, be sure to center the steering wheel very preceisely. If it'll end up slightly off-center, it will cause car pulling to a side.

If it is your lucky day, you might get a coding offered with a "gift" - full ESP deactivation possibility. Once you have successfully coded the module and adapted all the sensors, you can try to fully deactivate ESP: press and hold the ESP-off button in the center console for around 5 seconds. Watch your dashboard, it should somehow inform you that ESP is not fully off.

So you got a coding, everything works OK and you're happy but you feel that a simple 'Thanks' is not enough? Then PM me, I'll give you the details...

[SPEED133]

hello mate
thanks for your replay and sorry I did not provide all details
so car is vw golf MK 5 also 5 doors hatchback year 2008 1.4 petrol BUD engine right hand drive version
FWD
VIN WVWZZZ1KZ9W126047
PR no and coding you sent i will check in the morning then replay
thanks in advance

[hid3]

Oh, so it's RHD... You missed that part, that's why it's so important to provide as much information as possible.
Anyway, here's your coding for RHD:
133B200C09240000880B04E890200080300000

You can try and code it tomorrow morning. I doubt the 1.4 engine powered Golf will have non-standard/bigger brakes. So I'm 98% sure this coding is the right fit.

[SPEED133]

yes this is standard car
I will check it tomorrow and let know
thanks

[SPEED133]

hi again
so I`ve checked it and ecu did not accept this coding, however there is 36 digits "0" not 38 so I removed last 2 digits (from coding I received ) also no luck every time fault
if I tried put 38 fault was VCDS has detected a change in coding langth. are you sure you want to continue
after removed last 2 digits
coding rejected error 31 request out of range
any idea I`ll get mad :)

[hid3]

Alright, try these ones and report back:
1. 1342400C09240000C80B02E8902000803800
2. 133B200C09240000C80B04E890200080E800
3. 133B200C09240000C80B04E8902000803000

[SPEED133]

hi there
still nothing
coding rejected I do not know every single part comes from this car, even if I could find similar golf form 08 but very difficult

[hid3]

Are you sure you have specified the VIN correctly?
Can you confirm the very same VIn is coded into the ECU and the Cluster/IMMO?
Could you please provide full autoscan to me in PM?

[SPEED133]

ok no problem I will do

[hid3]

Here you go additional codings to try:


133B200D09240000880B04E8902000803000
163B600D09240000680B06E8902000813400
163B200D09240000680B04E8902000803000
163B200C09240000680B04E8902000803000

When trying each of the above coding, if it does not accept it, try adding two zeroes to the end.

[SPEED133]

hi again and thanks second coding has been accepted and everything looks fine :)
163B600D09240000680B06E8902000813400
take care and good weekend

[hid3]

Finally! Glad it worked.

[split78]

hello

i need long coding pls

wauzzz8p79a024965

audi a3 3.2 v6 dsg year 2008

[hid3]

Please provide more information, I've sent you a PM on that.
Meanwhile, you can try this coding:
11428012092400FE881401EA901E00413900

[split78]

thanks work well. i must adapt few sensor and now ok

[hid3]

Glad it worked. Also, have in mind that you need to adapt all those sensors in one ignition cycle. If you fail to do that, the coding will revert back to zeroes and you will need to repeat everything again...

[split78]

now all sensor is ok :)

[Faraday]

need long coding Seat Leon 1P Vin VSSZZZ1PZ9R026048 engine BZB

LHD FWD

397034

[hid3]

Hello Faraday,

please try this coding:
113B401209240000880B02E890210041300000

[Faraday]

very close original coding is 113B401209240000880B02E8902100413400
THX

[hid3]

Ha ha, missed only indirect ABS-based TPMS :) Couldn't know it's installed in your car :P
Glad you got it working. Please adapt all sensors in one ignition cycle. Do the adaptation on ideally flat ground. Be *very* careful when adapting steering wheel degree sensor - it must be very preceise. If it's at least 1 degree off, it might cause car pulling to one side when driving (don't ask me how I know...)

[Faraday]

THX for info you should consider making App for long coding, this is 'pain in the ass'.

[hid3]

Usually people shouldn't lose their ABS coding, unless they swap ABS module. To me it's quite strange here in the forums there quite a bunch of coding requests...
There are lots of different modules (e.g. for Polo-based cars, for Golf-based cars, etc) that making an app would be quite difficult/insane :)

[Faraday]

1k0907379ad was dead (no comm) as far as I know it is common problem. |You can lose long coding if do all key lost ( I always do full scan)

[hid3]

Strange enough, I have used but good 1K0907379BE laying around for already a year... I published that I have it :rulez: and no one seems to be interested. At salvage yards they ask 60-100 EUROS for such unit. Probably my country is too small or the cars here are too old.

[marcin7091]

hello

i need long coding ABS pls
Golf 6 1.6tdi *CAY274760* 2010r manual
1K0 614 517 AT G2+
wvwzzz1kzaw380865

[hid3]

Hello marcin,

please try the following coding (assuming your car ir LHD):
113B200D092A00FA881304EA901E0041310000

[marcin7091]

Tanks Coding working.. Now I have error: 00003 end 01044 :(

[hid3]

Can you please provide full autoscan of the car in question (send it to PM).
Thanks.

[poki123]

Hi
I need help in coding ABS unit:

Audi A3 8P 2010
2.0 TFSI (CBF)

VIN: WAUKEAFMXAA112808

autoscan from VCDS:

[hid3]

Hello,

please try this coding:
11424012092300FC881302E490210041390800

[poki123]

Hello

coding no accepted.
Error 31 Requested out of range :(

in attachment sticker with car configuration.

[hid3]

Hm...

How about this one?
11426012092300FC881306E490210041390000

[poki123]

Hm...

How about this one?
11426012092300FC881306E490210041390000


coding not accepted
this car was imported from USA

[poki123]

any another idea ...:)

[hid3]

Yeah, I see it's from USA.
Any background on the story? What has happened to the original coding? Maybe the module was replaced?

Meanwhile please try this:
1142600F092300FC881306E490210041390000

[poki123]

Yeah, I see it's from USA.
Any background on the story? What has happened to the original coding? Maybe the module was replaced?
Background is that I take this car without instrument claster and immo bypass in engine ECU
sombody was here before me :) Every thin is done excl. ABS coding

[hid3]

Sorry, I've just edited my original message and you replied...
Please try this coding:
1142600F092300FC881306E490210041390000

[hid3]

Also, you're telling that the ECU is altered, the instrument cluster was missing. Could you please look up the VIN number in the blocks (Engine, Instruments, etc). Should be somewhere available among Measuring Blocks. It might be that the ECU and/or cluster might belong to different car and different VIN might be coded there

[hid3]

Sorry for repeated numerous posts but some hint here: if you are using VCDS, go to "Advanced ID" function and check VIN there. Check for both, Engine and Instruments. Check every digit and letter. Make sure everything matches. If it doesn't, post the recorded VIN(s) in those blocks.

[poki123]

Also, you're telling that the ECU is altered, the instrument cluster was missing. Could you please look up the VIN number in the blocks (Engine, Instruments, etc). Should be somewhere available among Measuring Blocks. It might be that the ECU and/or cluster might belong to different car and different VIN might be coded there

every think looks good:

[hid3]

So the last coding I have you did not work either, right?

[poki123]

So the last coding I have you did not work either, right?
1142600F092300FC881306E490210041390000

not working
Should I first enter pin or login before coding?

[hid3]

Let's not give up!!

try this:
114BC012492300FC881303E492210041310000

if not, then this:
114BC00F492300FC881303E492210041310000

You don't need any pin or login for coding, just go to Long Coding. Then if the module accepts the coding, you will need to use Login to adapt sensors. But before that let's figure out the correct coding first!

[poki123]

Let's not give up!!

try this:
114BC012492300FC881303E492210041310000

if not, then this:
114BC00F492300FC881303E492210041310000

You don't need any pin or login for coding, just go to Long Coding. Then if the module accepts the coding, you will need to use Login to adapt sensors. But before that let's figure out the correct coding first!

not accepting

[hid3]

Really strange.. Now you need to go brute force:

114B6012492300FC881306E492210041310000
114B600C492300FC881306E492210041310000
114B600D492300FC881306E492210041310000
114B600F492300FC881306E492210041310000


Also, this car does NOT have ALL-wheel-drive (4WD), has it?

[hid3]

Also, two important things:
1. Make sure your battery voltage is sufficient (12.2 V at least)
2. Make you you're entering a non zero WSC/Importer/Equipment numbers before clicking "Do It" when doing the coding.

[hid3]

One more coding which may work:

1150C00F492300FC881303E492210041390800

[poki123]

Many thanks for lot of coding strings. Today I back home. Tomorrow morning I'll test all of codes and immediately give you a feedback.
First of all before coding or flashing always I connect external charger to the car's instalation so voltage has100% properly value about 13,2 V.
I can't test it now because I left my workshop, I was afraid of leave connected VCDS and key in ON position in car with Teamviewer to operate all of it :)

[poki123]

quattro?:)
I don think so. I must look under car and check it. 99% is no all wheel drive (quattro)

[hid3]

Yeah, sure, leaving with ignition ON is a bad idea.

Check and report back.
Start from the last coding I posted and go up. Make sure the WSC, Importer and other fields are not zeroes too!

[poki123]

I have tested last five coding and every one is not correct :(
This car is for sure no AWD is front wheel drive.
Which part in car decides that codding pass or not? gateway, immo, ecu? abs module?

[hid3]

It's thre ABS module but it does checks against some other, e.g. ECU, instrument cluster.

Let me think a bit on this and I'll probably provide some more codings...

[hid3]

Alright, please check the VIN number in CAN Gateway just to be sure.

A few more codings, but honestly at this stage I'm more guessing rather than using some logic:

1450C00F492300FC881303E492210041390800
7450C00F492300FC881303E492210041390800
1150C00F492300FC881303E492210041390000
1150C00F492300FC881303E492210041380000
1150C00F492300FC881303E492210041310000
1150C00F492300FC881303E492210041300000
1150C00F492300FC881303E492210040390800
1150C00F492300FC881303E492210042390800
1150C00F492300FC881303E492210051390800
1150C00F492300FC881303E492210050390800
1150C00F492300FC881303E492210042390800
114BC00F492300FC881303E492210041390800
1148C00F492300FC881303E492210041390800

[poki123]

no success:(

but take a look on option 1KS is code of rear breke disks 232mm x 9
what does mean first byte in codding 11 , 14 , 74

I can't find VIN in gateway (19).

[hid3]

This is what I'm seeing in autoscan, Instruments module:
1 Fault Found
00003 - Control Module
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 1
Fault Frequency: 1
Reset counter: 255
Mileage: 124756 km
Time Indication: 0
Date: 2014.06.16
Time: 00:00:01

Quite possible it might be preventing the ABS from accepting coding. What's wrong with that instrument cluster? Any ideas on fixing the fault code?

Yes, I'm aware of 1KS PR code. In fact, even with wrong brake disc diameters set, it should accept the coding, just your ESP would not be so efficient as it could be.

11 means Standart LHD
14 Means GTI/GTD/RS/S LHD model
74 is being used for Scirocco LHD model so I just gave it a try.

Honestly, I'm out of ideas. Maybe someone else withh chime in.

[hid3]

Quick Google search says this fault code might occur once Instruments cluster was tampered with. Usually this mean odo rollback.
You can try this:


Check/Perform Instrument Cluster Service Interval Settings (Adaptation Channels 42, 43, 44, 45 and 49)

Or, I think, you can use SRI reset funciton at the first VCDS page. I'd suggest going through several SRI resets (various regions, time/distance, longlife, etc) and then ending up with the desired one you want to use. Then try to see if the error is still there (try clearing it)

[smokey08]

Poki123 try this:

11504012492300FC881306E492210041B90C00

[poki123]

I just think that reason of no accepting coding maybe this:

instrument clustar has been reflash from 8P0 920 892N (USA software) >> 8P0 920 931S (EU software) and during coding ABS pomp (USA software) there are some mismatches between each other.

If I'll find some one with VAS online SVM tester I do this coding.
Tomorrow I try coding with your string smokey08.

I want to know how many elements of car I need to make coding "on table"... :)
Gateway(19) Instrument(17) IMMO(25) of course ABS/ESP(03) everything connected with CAN and VCDS. What determinate ABS unit(03) to no accepting coding...

[hid3]

OMG what a coctail you have. Why was the Instruments software reflashed? I believe miles could be easily changed to km and Fahrenheit also converted to Celsius without an issue using just VCDS. Now seems you ended up with 'module defective' code. Obviously something went wrong during the reflash.

What else is altered on the car? Is ECU software stock or some kind of reflash?

[poki123]

I told that I recive this car in this state with two instrument cluster on back seat and with bypass immo in orginal ecu. I have another instrument cluster without def. (without DTC) and with this coding ABS looks the same. I take this car after same people "electronics" say it's impossible to repair it. I don't belive in impossible :)
All electric windows and slide roof not working when I start make this car.

Now only ABS/ESP pomp needs to be coding rest of car works perfectly :)

[smokey08]

If its NAR model then also try these:
1150400F492300FC881306E492210041B90C00
1150400F492300FC881306E492210041390C00

[poki123]

If its NAR model then also try these:
1150400F492300FC881306E492210041B90C00
1150400F492300FC881306E492210041390C00

no accepted :)

[poki123]

Poki123 try this:

11504012492300FC881306E492210041B90C00

no accepted

[magicworx]

Hi Guys
I have a golf 6 with ABS coding lost.Please could you help with coding? Details as follows:
2012 VW Golf 6 1.6
VIN: WVWZZZ1KZBW070446
ENGINE:BFS
RHD SOUTH AFRICAN model.
Thanks in advance

[hid3]

Hello Magic,

please try this coding:
133B200D092900FA880F04E8901F0080310000

No matter if it works or not, could you please provide the ABS unit's part number as seen in VCDS?
Also, could you check your glove box and see if there is "SET" button? Or in the center console?

If there is SET button, I could enable TPMS function which is quite useful.

Also, is there a button in the center console with "slippery car" icon and "OFF" word?
If there is, I could enable full ESP deactivation with the button, but again, this depends on your controller part number

[poki123]

I'm just waiting for coding online by Audi servis partner. I'll give a feedback from result of it.

[magicworx]

Thanx hid3 but coding not accepted.No set button in glove box but i do have "slippery car" icon.
Part no. 1KO 907 379 AT as displayed by VCDS.

[hid3]

Seems that you got a bit older module in your MY2012 car.
Could you please do a full autoscan? You can send it to me via PM.

[magicworx]

Thank You hid3.Will contact soonest.

[poki123]

online coding for A3 8P 2010 North America
VIN: WAUKEAFMXAA112808
11 50 60 0F 49 23 00 FC 88 13 06 E4 92 21 00 41 39 08 00

Thanks for help.

[hid3]

online coding for A3 8P 2010 North America
VIN: WAUKEAFMXAA112808
11 50 60 0F 49 23 00 FC 88 13 06 E4 92 21 00 41 39 08 00

Thanks for help.

Some kind of nonsense... It seems that in some codings I was only a few digits off. Strange how they coded the brakes - in one place it is 312/253 while in another it is 312/272. Those modules are poorly documented to the public :(

[poki123]

Some kind of nonsense... It seems that in some codings I was only a few digits off. Strange how they coded the brakes - in one place it is 312/253 while in another it is 312/272. Those modules are poorly documented to the public :(
Before take my car for coding they ask me three times if for sure in the car is mounted ABS module exactly with the same part number like oryginal. If yes they can make coding for sure. Now I know if I can't coding ABS module with first 5 code string I don't want to waste my and your time and I go do this coding online. Price od coding I sent on PW.

[hid3]

Well, I've updated my records and notes. If anyone requests coding for similar module and big brake sizes, now I'll know what values to put there... Thanks for sharing.

[stammba]

Please help Caddy WV2ZZZ2KZDX001062 - ESP MK60EC1 - 1K0 907 379 BK

[hid3]

Please help Caddy WV2ZZZ2KZDX001062 - ESP MK60EC1 - 1K0 907 379 BK

Hello,

could you provide more information?

The required info is described here: http://www.digital-kaos.co.uk/forums/showthread.php/524246-MK60-ABS-long-coding-for-members?p=2835479&viewfull=1#post2835479

It's impossible to properly code the module without knowing anything about the car.

[stammba]

Hello,

could you provide more information?

The required info is described here: http://www.digital-kaos.co.uk/forums/showthread.php/524246-MK60-ABS-long-coding-for-members?p=2835479&viewfull=1#post2835479

It's impossible to properly code the module without knowing anything about the car.
Caddy II (2k), 2013, WV2ZZZ2KZDX001062, Left hand drive, BSX engine, FWD, 1K0 907 379 BK

[hid3]

Try this coding:
423C200D092203FB420B04EA901BC041300000

[stammba]

Try this coding:
423C200D092203FB420B04EA901BC041300000
Thank you alot it worked !
Regrads
Stammba

[lush29]

hi, i need codding for vw jetta 1.6tdi,wvwzzz16zbm132446,mk60ec1,1k0907379bj, Right h/d, engine code cayb. thank you

[lush29]

hi, i need codding for vw jetta 1.6tdi,wvwzzz16zbm132446,mk60ec1,1k0907379bj, Right h/d, engine code cayb. thank you
Anyone please?

Sent from my SM-G925F using Tapatalk

[smokey08]

I might be able to help if you have a vcds autoscan so I can see what modules are fitted and how their coded.

[lush29]

I might be able to help if you have a vcds autoscan so I can see what modules are fitted and how their coded.
Ok smokey08 thanks. I scan it in the morning and posted back. Thanks

Sent from my SM-G925F using Tapatalk

[hid3]

Hello Lush,

please try this coding:

133B400D092580FC880F02E8901F0181310000

Also, do you have the "SET" button either in console or in glove box?

[lush29]

hid3 i try your cod eand is not working.
i attached log filles with full scan. thanks

[magicworx]

Hi guys
Finally got full scan results.@hid3-I dont know if in attached scan results properly in PM. Dont know how to send attachment on PM.

[viytik]

seat ibiza 2011 1.2 TDI (https://www.google.com.ua/search?q=seat+ibiza+2011&biw=1280&bih=895&site=webhp&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjvtLOhsaPPAhXKCywKHT5HA_sQsAQIGQ)
VSSZZZ6JZCR024179
6R 907 379AD
ABS8.2 front H03 0001

[lush29]

hid3 i try your cod eand is not working.
i attached log filles with full scan. thanks
Any one please?

hi, i need codding for vw jetta 1.6tdi,wvwzzz16zbm132446,mk60ec1,1k0907379bj, Right h/d, engine code cayb. thank you


Sent from my SM-G925F using Tapatalk

[smokey08]

Try this:
A63B40F8092500FC650F02E8901F0081211000

[lush29]

Try this:
A63B40F8092500FC650F02E8901F0081211000
Thank you m8.

Sent from my SM-G925F using Tapatalk

[lush29]

Try this:
A63B40F8092500FC650F02E8901F0081211000

Hi Smokey08, i try your codding and is accepting ok, apart from this 2 faults attached, can you do something with them please? thanks
also want to mention i use it autologic and they give 20 coddings but non of them was accept it, apart from yours. thanks

[hid3]

Seems that the coding is not valid.
a couple of questions:
Does your car have automatic distance control/braking system? Adaptive cruise control?
Does your car have the SET button in center console or glove box? (This is used for TPMS reset)
Could you please post a sticker with PR numbers of your car? A few memebers have posted it before.

[lush29]

Seems that the coding is not valid.
a couple of questions:
Does your car have automatic distance control/braking system? Adaptive cruise control?
Does your car have the SET button in center console or glove box? (This is used for TPMS reset)
Could you please post a sticker with PR numbers of your car? A few memebers have posted it before.
Hi hid3 thanks for coming back to me. For sure car not have the SET button. I dond think she has automatic distance control or adaptive cruise control( how can i check) and i attached pic with pr sticker. Thank you.399509

Sent from my SM-G925F using Tapatalk

[hid3]

J428 seems to be like Adaptive cruise module... Look at the front grill. VW logo, or lower grille. Is there any sensor in the center of the car?Based on your PR numbers, the coding might be slightly amended:

With front disk brake diameter (280 mm), 2 stage ESP-off switch and Adaptive Cruise Control:
A63B20F8092580FC650F02E8901F0181011000

With fron disk brake diameter (280 mm ) and 2 stage ESP-off switch:
A63B20F8092580FC650F02E8901F0181211000

With proper front disk brake diameter (280 mm):
A63B20F8092500FC650F02E8901F0081211000


Give it a try from the top one, down to lowest. Be sure to adapt ALL the sensors in one ignition cycle. Do the adaptation on flat ground (ideally empty parking space).

[lush29]

J428 seems to be like Adaptive cruise module... Look at the front grill. VW logo, or lower grille. Is there any sensor in the center of the car?Based on your PR numbers, the coding might be slightly amended:

With front disk brake diameter (280 mm), 2 stage ESP-off switch and Adaptive Cruise Control:
A63B20F8092580FC650F02E8901F0181011000

With fron disk brake diameter (280 mm ) and 2 stage ESP-off switch:
A63B20F8092580FC650F02E8901F0181211000

With proper front disk brake diameter (280 mm):
A63B20F8092500FC650F02E8901F0081211000


Give it a try from the top one, down to lowest. Be sure to adapt ALL the sensors in one ignition cycle. Do the adaptation on flat ground (ideally empty parking space).
Hi hid3 again all codes rejected. I can not adapt any sensors because is telling wrong coding. And i cant see any sensor on the grill or under. And is only sterring angle sensor light on and traction control light. Abs light and hand brake light are gone with the smokey codding. Thanks hid3 again for your hard work and not giving up.

Sent from my SM-G925F using Tapatalk

[hid3]

Okay, now let's stick with working coding:

A63B40F8092500FC650F02E8901F0081211000

Are you able to adapt all the sensors which ar emissing adaptation? Note that you will need to use "Login" function for each adaptation. All should be done in one ignition cycle.

After all is adapted, is the fault code 'incorrect coding' still present?

[lush29]

Okay, now let's stick with working coding:

A63B40F8092500FC650F02E8901F0081211000

Are you able to adapt all the sensors which ar emissing adaptation? Note that you will need to use "Login" function for each adaptation. All should be done in one ignition cycle.

After all is adapted, is the fault code 'incorrect coding' still present?
Not let me to adapt sensors because i have wrong codding. And i think because of the j428. Rest of the faults are for sensors adaptions.

Sent from my SM-G925F using Tapatalk

[smokey08]

Try these:
A63B20F8092500FC650F04E8901F0081210000
A33B20F8092500FC650F04E8901F0081210000

[smokey08]

magicworx, Try this:

133B200D092900FAC80F04E8901F0080310000

[poki123]

online coding for A3 8P 2010 North America
VIN: WAUKEAFMXAA112808
11 50 60 0F 49 23 00 FC 88 13 06 E4 92 21 00 41 39 08 00

Thanks for help.

today I swap instrunemt cluster (only in scientific expertise reasons :) ) but if I put old inst. cluster back
this long coding:
11 50 60 0F 49 23 00 FC 88 13 06 E4 92 21 00 41 39 08 00 no match :rofl::single_eye::torn:

My question is WHY??? if was nothing change in car configuration. What decide of matching long coding???

oudside temp.?
level of tank,
atmosferic pressure,
frequ. in radio ...


:aetsch: === my ABS/ESP control unit!
:giveup:it's me...

[hid3]

Short answer would be "hell knows".
Long answer - are you swapping US region to EU region cluster or vice versa?

[poki123]

Short answer would be "hell knows".
Long answer - are you swapping US region to EU region cluster or vice versa?

I have done coding with string from last online coding: 11 50 60 0F 49 23 00 FC 88 13 06 E4 92 21 00 41 39 08 00
Answer: don't do this with Very Cool Diagnostic Shit... AutoCom done this in 15 sek. to confirm my thinking I do this again with offline KTS a little bit longer but success.

[smokey08]

VCDS works very well for me. I can see you are using a clone with ancient version 12.12.0, That is probably where you problem lies.

[smirnoff_rules]

the best and cheapest entry tool on the market , no idea why any garage wouldn't buy one instead of shitty clone

[poki123]

VCDS works very well for me. I can see you are using a clone with ancient version 12.12.0, That is probably where you problem lies.

Release 12.12 rel. 13 Sept. 2013
Clone but good, not from China. I have orginal "not clone" device also but not in this location and I test it with this coding. Are all interface in your garage no clone :)

[hid3]

No one is from "China". I think Ross Teech is based in United states. The cable is just a piece of wire and some chips/electronics. The chip might be from China or wherever. But if it's not genuine, latest VCDS won't work.

If you get a genuine Ross Tech cable, you also get the cable itself PLUS lifetime software updates. So like every month you've got fresh software... And in addition to that, you get free support from Ross Tech. So you choose...

[smokey08]

Release 12.12 rel. 13 Sept. 2013



Thats over 3 years out of date add in rosstechs development time and the cars that it will work properly with are old.

I do have a few clones but most of my tools are genuine as they work out cheaper in the long run.

[poki123]

oke this is not thread about interface clone or not. I think that make ABS coding like wheel of fortun is not right way in this case.
I think there are special commmand (service procedure) to coding this ABS device, VAG CAN pro can do this without online SVM management :)

No one of us is not a master in this coding but every one can be if we have to know how its working.
In my opinion only VIN, TMPS, ECU, comfort module and Gateway decide to accept coding or not. How size of break disks can affect on coding accepting or not. Maybe ABS/ESP module doesn't accept sick front or/and rear breake disk size compilatoin (unsafety). Clever people discovery coding for configure many other settings in one common device. If I'm wrong just tell me this.

Coding is for customise device! This is no Comopnent Protection :)

[magicworx]

Hi Guys
Please if you can,I need help with ABS coding for Golf 6 details:2012 VW Golf 6 1.6
VIN: WVWZZZ1KZBW070446
ENGINE:BFS
RHD SOUTH AFRICAN model
Thanks in advance
PS;
Part No.1K0907379

[lush29]

Try these:
A63B20F8092500FC650F04E8901F0081210000
A33B20F8092500FC650F04E8901F0081210000
Sorry for coming back late. Customer took the car over the weekend. I try both of them codes and still the same prob all the time codes are accepted but always get fault for 1044 control unit incorected coded. Can you give more codes please? Thanks

Sent from my SM-G925F using Tapatalk

[Tyson500]

Hi thanks for all the help

[doctorelectrical]

Good day.
i need the long code abs vw golf VI
reference 1k0907379AN esp MK60EC1 H45 0107
vin car WVWZZZ1KZAW078709 2009 2.0 tdi
Can help me.

[smokey08]

Hi Guys
Please if you can,I need help with ABS coding for Golf 6 details:2012 VW Golf 6 1.6
VIN: WVWZZZ1KZBW070446
ENGINE:BFS
RHD SOUTH AFRICAN model
Thanks in advance
PS;
Part No.1K0907379


Have you tried the coding I posted a few days ago?

[doctorelectrical]

i already try codes you have posted. not work.
you have more?

[smokey08]

i already try codes you have posted. not work.
you have more?

Post a VCDS autoscan and a photo of the white label under carpet in luggage compartment.

[doctorelectrical]

400655400656

[hid3]

Hello,

please try this coding:
133B400D09290002C81202E490220082310000

[smokey08]

400655400656

Has the car got a tyre pressure button?
If no then use this:
143B400D09290002281202E4902200423100

[hid3]

doctorelectrical, somkey, so is this left hand drive or right hand drive?? I'm confused.

[smokey08]

doctorelectrical, somkey, so is this left hand drive or right hand drive?? I'm confused.

Left I assume as Portugal is listed as his location. I haven’t checked it by the VIN.

[donkez]

WAUZZZ8P0BA102685

Please help me with this Audi A3, shes driving me nuts...

Its a right hand drive, 2.0TDI

Thanks in advance

[hid3]

What is the module part number?
Also, could you take a picture of the white sticker under the trunk carpet?

[donkez]

the ABS control module part number is 1K0907379BE

And the lable:

401753

[hid3]

donkez, please try this coding:
13426012092200FCC81106EC901E0082380800

P.S.: ignore the coding I've sent you via PM, it is for smaller disc brake diameter than your car has...

[donkez]

donkez, please try this coding:
13426012092200FCC81106EC901E0082380800

P.S.: ignore the coding I've sent you via PM, it is for smaller disc brake diameter than your car has...

CODING ACCEPTED, THANKS A LOT :)

[hid3]

Glad it worked. Make sure to adapt all the sensors in one ignition cycle, othervise the coding will revert back to zeroes and you will need to start over.
For best results, do the adaptations on ideally flat surface. Be very careful when adapting steering angle sensor. If you make at least one degree mistake, it might cause car pulling to one side (don't ask me how I know....).

[donkez]

Glad it worked. Make sure to adapt all the sensors in one ignition cycle, othervise the coding will revert back to zeroes and you will need to start over.
For best results, do the adaptations on ideally flat surface. Be very careful when adapting steering angle sensor. If you make at least one degree mistake, it might cause car pulling to one side (don't ask me how I know....).

Actually car has auto start stop, do I have to change coding for that?

[hid3]

Use this coding for start/stop function to be available:
13426012092200FCC81106EC901E0092380800

[R2medyk]

Hi, can you please help me with the coding of the MK60EC1 1K0-907-379BA
Audi A3 WAUZZZ8P0AA024312
1.6CR CAYC TDI
RHD
Start Stop
without TPMS
EOA 7AO 4UF 6XD 5SJ 5RU
1KD J2D 1ZF 1AT
3FA UAO G17 5MC 7X0 4R4
F0A 8GU 0YF L34
TF3 3NZ 8BD U1B X2B 1N3
2ZQ 8Q1 9Q2 8Z5 D38
7Q0 C3L 7K0 4X3
3L3 4KC 3Y0 4K4 5D1
1SA UG0 7MG QG1 4GQ

[smokey08]

Hi, can you please help me with the coding of the MK60EC1 1K0-907-379BA
Audi A3 WAUZZZ8P0AA024312
1.6CR CAYC TDI
RHD
Start Stop
without TPMS
EOA 7AO 4UF 6XD 5SJ 5RU
1KD J2D 1ZF 1AT
3FA UAO G17 5MC 7X0 4R4
F0A 8GU 0YF L34
TF3 3NZ 8BD U1B X2B 1N3
2ZQ 8Q1 9Q2 8Z5 D38
7Q0 C3L 7K0 4X3
3L3 4KC 3Y0 4K4 5D1
1SA UG0 7MG QG1 4GQ

Here is your coding from information you have given:
13422012092400FEC80E04E5901B00913808

[R2medyk]

Thank you code correct.
All done and dusted.

[nabilrifi]

hello
pleas need long coding for abs
1k0907379bj
esp mk60ec1
vin:wvwzzz1kzcz245909
thnks

[shumeras]

Hey! could you please help me with mk60ec1 1k0907379bg vw jetta 2012 3VWLL7AJ7BM053652. Thank in advance!

[hid3]

hello
pleas need long coding for abs
1k0907379bj
esp mk60ec1
vin:wvwzzz1kzcz245909
thnks

Hello,

please provide more information. See my previous post a few pages back on what information we need.

[shumeras]

jetta is USA version. 2.0 TDI.

[nabilrifi]

Hello,

please provide more information. See my previous post a few pages back on what information we need.
hello
engine 1.6 tdi cayc
left hand drive
1k0907379bj
esp mk60ec1
vin:wvwzzz1kzcw245909
without tmps
start/stop instaled

[hid3]

hello
engine 1.6 tdi cayc
left hand drive
1k0907379bj
esp mk60ec1
vin:wvwzzz1kzcw245909
without tmps
start/stop instaled




Please try this coding:
113B200D092600FF881404E490220051310000

Also, let me know if you have "slippery car/OFF" button in your center console. If so, then your module can be coded for full ESP off.

[hid3]

?umeras, please try this coding for your Jetta from the States:
114B600C492700FD881106E9921B0042B70000

[shumeras]

Thanks a lot!

[nabilrifi]

hello
this codin iw work perfect all light in dash off
still one thing this car has butoun start startoff

Please try this coding:
113B200D092600FF881404E490220051310000

Also, let me know if you have "slippery car/OFF" button in your center console. If so, then your module can be coded for full ESP off.

[hid3]

The coding I've provided to you should already support Start/Stop (aka BlueMotion) function.

This coding will let you turn the ESP off using the button in the center console:
113B200D092680FF881404E490220151310000

[josecuervo]

can any one help me with coding for Abs on polo 6R south african version just shows 0000000
vin AAVZZZ6RZCU035725
vag no 6r0907379aq
abs9.0 front h01 0003
here are some ones off other cars
210248E3416D02B2842612E482D240411700
210248E3417202B7842712EA82D640411700

[Starling_vit]

please help with long coding for Audi a3 2014 year
VIN WAUZZZ8V4F1051650
ABS+ESP Contitech MK100IPB 5Q0907379L
Thanks

[M3L3R]

Hello hid3! Could you help me with coding?
Seat Leon 1.2TSI 2010
VSSZZZ1PZBR*******
RHD
1K0907379BJ
Thanks!

[hid3]

Hello M3L3R,

let's start with this coding:
133B201209230001C80F04E7901F0080300000

Let me know if it works.
If yes, then we'll try to add hill-hold function.

Also, do you have TPMS reset button?
Does your Seat has got "slip control off" button in center console?

[M3L3R]

Code accepted, but is invalid. Its my fault. I didnt give you enough info. Tpms, slip control off and start/stop button are in the car. Thanks!

[hid3]

Alright, what about this one:
133B201209238001C80F04E7901F0190350000

[M3L3R]

Thank you! Working peftect now!

[doctordiag]

hello
pleas need long coding for abs
1k0907379BD
esp mk60ec1 H31 0108
VIN WV2ZZZ2KZBX274535
engine 1.6 tdi cayc
left hand drive

[hid3]

hello
pleas need long coding for abs
1k0907379BD
esp mk60ec1 H31 0108
VIN WV2ZZZ2KZBX274535
engine 1.6 tdi cayc
left hand drive

See this:
http://www.digital-kaos.co.uk/forums/showthread.php/524246-MK60-ABS-long-coding-for-members?p=2835479&viewfull=1#post2835479

[hid3]

And try this....
423C400D092903FE421002E7901EC041300000

[doctordiag]

THANKS ALL IS OK

[hid3]

'Thanks' is too much but a pint of beer would be just enough.

[Usual Suspect]

Hi
Need help with abs coding please for MK60EC1

ABS Part number 1K0 907 379BE
VIN: WAUZZZ8P6BA050768
Right hand drive uk car


1. Exact model of the car
AUDI A3 2.0 TDI
2. Year of the car
2010
3. VIN
WAUZZZ8P6BA050768
4. Left hand drive or right hand drive model
RIGHT HAND DRIVE MODEL
5. Engine type
DIESEL CFGB
6. 4Motion/4WD version or FWD
FWD
7. PR numbers for brake system - they begin with numer "1". They can be located on the first page of service maintenance booklet OR under the trunk carpet.
1KD
1ZA
1AT
1MR
1SA

Any help would be greatly appreciated

Many thanks

[hid3]

See this:
http://www.digital-kaos.co.uk/forums/showthread.php/524246-MK60-ABS-long-coding-for-members?p=2835479&viewfull=1#post2835479

[Usual Suspect]

See this:
http://www.digital-kaos.co.uk/forums/showthread.php/524246-MK60-ABS-long-coding-for-members?p=2835479&viewfull=1#post2835479

Original Post updated with information requested. Thank you for your guidance

[hid3]

Please try this coding:
13424012092700FAC81202EA90210082380800

(assuming your car does not have start/stop system installed)

[Usual Suspect]

Please try this coding:
13424012092700FAC81202EA90210082380800

(assuming your car does not have start/stop system installed)


The car has HAS Start and stop

Is the coding different?

Thanks

[hid3]

This one should work with start/stop:
13424012092700FAC81202EA90210092380800

[Usual Suspect]

This one should work with start/stop:
13424012092700FAC81202EA90210092380800


That one comes back with control module incorrectly coded

Can you suggest any others?

Many thanks

[hid3]

Hm.. How about this one?
13426012092700FAC81206EA90210092380800

[Usual Suspect]

Hm.. How about this one?
13424012092700FA881202EA90210092380800

Gives me Request out of range error

[hid3]

Sorry, I have edited the post. Please try this one:
13426012092700FAC81206EA90210092380800

[Usual Suspect]

Sorry, I have edited the post. Please try this one:
13426012092700FAC81206EA90210092380800

Got incorrect codiing fault again


01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 47
Mileage: 189583 km
Time Indication: 0
Date: 2016.10.20
Time: 19:56:51


Freeze Frame:
Count: 3
Count: 2
Count: 12800
Count: 8192
Count: 50688
Count: 0
Count: 260
Count: 0

[hid3]

Will need to do more deeper digging, seems this one is a bit more difficult.

If possible, please provide a picture of the full label with all the PR numbers...

Thanks.

[Usual Suspect]

Picture below

[Usual Suspect]

Will need to do more deeper digging, seems this one is a bit more difficult.

If possible, please provide a picture of the full label with all the PR numbers...

Thanks.


Picture added in above post

[hid3]

What about this coding?
13426012092700FAC81206EA90210092380000

[hid3]

Also, two more to try:
13426012492700FAC81206EA92210092380800
and
13426012492700FAC81206EA92210092380000

[smokey08]

I think it should be:
13426012092700FAC81206EA90210092B80800

[Usual Suspect]

Also, two more to try:
13426012492700FAC81206EA92210092380800
and
13426012492700FAC81206EA92210092380000

Thank you, will try in morning and update

[Usual Suspect]

Thank you, will try in morning and update


All 3 return back with control module incorrectly coded

Any ideas please?

Thank you again for the assistance

[hid3]

Have you tried the coding which Smokey provided?

I'm almost out of ideas and about to give up...

[Usual Suspect]

Have you tried the coding which Smokey provided?

I'm almost out of ideas and about to give up...

Yes have tried that to.

is there anything other information that I may have missed to help with the coding?

Thank you

[hid3]

Does the car have XDS? This is extended electronic differential lock? I think this Audi should have but never hurts to ask...

Also, try this:

13426012892700FAC81206EA91210092B80800

[hid3]

Usual Suspect, please also try this one:
16426012092700FA681206EA90210092380800

[Usual Suspect]

Usual Suspect, please also try this one:
16426012092700FA681206EA90210092380800


They all returned the same fault

[hid3]

Sorry but I give up. I don't have any more ideas.
Maybe someone else will chime in and help you...

[smokey08]

Can you provide a full VCDS autoscan?

[Usual Suspect]

Sorry but I give up. I don't have any more ideas.
Maybe someone else will chime in and help you...



Sorry but I give up. I don't have any more ideas.
Maybe someone else will chime in and help you...

Will get auto scan shortly smokey08, been a long few hours playing with the coding. so hopefully I've done it now.

I believe I may have sorted it but whether it was the right way to do it I'm not sure.

on VCDS BYTE 15 bit 6-7 asks whether car is left hand drive or right.

This car is a Uk right hand drive vehicle driven on the left hand side of the road

I changed the abs coding to left hand drive and it accepted and took away the error.
Everything functions as it should.

Can vcds perhaps have the byte logged in correctly or is it case of just luck?

[hid3]

Strange... VERY strange.
Firstly, it's byte 15, not byte 16 you are referring to.
Secondly, the "left hand drive" and "right hand drive" cars are distinguished by the side steering wheel is mounted. E.g. continental Europe cars are "Left hand drive", UK cars are "right hand drive".

So finally, what is the coding you suceeded with..?

[Usual Suspect]

Strange... VERY strange.
Firstly, it's byte 15, not byte 16 you are referring to.
Secondly, the "left hand drive" and "right hand drive" cars are distinguished by the side steering wheel is mounted. E.g. continental Europe cars are "Left hand drive", UK cars are "right hand drive".

So finally, what is the coding you suceeded with..?

Coding Below


Address 03: ABS Brakes Labels: 1K0-907-379-60EC1F.clb
Control Module Part Number: 1K0 907 379 BE HW: 1K0 907 379 BE
Component and/or Version: ESP MK60EC1 H31 0108
Software Coding: 16426012092700FA681206EA90210052380800

No fault code found.

I wonder what could cause this issue? Ive been speaking to my ex Audi and VW tech and both of them suggested that it may have been that the earlier MK60 EC1s had some coding issues and 1 of them on occasions has had this before.

What are your thoughts?

[Usual Suspect]

BYTE 15 your correct sorry. Type error

Picture below

[hid3]

No idea, seriously.
I wouldn't say 1K0 907 379 BE is early module. 1K0 907 379 A* might be considered early one. OTOH, depends on what's called "early" and "late" in the context.

I don't remember if I have coded any 1K0 907 379 AT/BE/BJ for RHD car so your friend might be right. Next time if it won't work, I'll keep in mind this.

[Usual Suspect]

No idea, seriously.
I wouldn't say 1K0 907 379 BE is early module. 1K0 907 379 A* might be considered early one. OTOH, depends on what's called "early" and "late" in the context.

I don't remember if I have coded any 1K0 907 379 AT/BE/BJ for RHD car so your friend might be right. Next time if it won't work, I'll keep in mind this.


I did think the same when it came to the part numbers revisions.

Could it be a case of VCDS coding Bit issue?

No other module delivers any coding faults and the system seems to run correctly.

What would be the impact of having the coding this way?

[hid3]

I doubt VCDS is an issue.
All we do is supply hex-based coding to the module. VCDS is just a tool/interface for that. If you'd be doing that with VAS or any other tool, the effect would be the same - wrong coding wouldn't be accepted, while the correct one would work.

I seriously doubt that one bit might make any difference for ESP system. Also, bear in mind there are other bytes which indirectly code steering wheel - byte 0 and byte 8. And there you have RHD.

For ESP to function properly you must have correct brake rotor size set. And in your case, you are spot on. Engine coding is important too I think, which is correct on your car too.

Drive more, worry less. Happy driving!

[sanchos]

Hi
Please help with Long Coding

Skoda Octavia 2009
TMBJS61Z692048036
LHD 1,9 TDI
ABS 1K0 907 379 AD

[albertomarmol]

hola MESECITO CODIG LARGA PARA SEAT ALTEA VSSZZZ5PZ9R017311 GRACIAS

[hid3]

http://www.betterthanpants.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/-/i-want-you-to-speak-english-bs-base.png

[iristof]

Hi,
i need the coding for scirocco 2 tdi please
wvwzzz13ZDV007134
thanks

[ibrasport]

hi to all i want help for abs coding

Chassis Number: WVWZZZ16ZCM149963

ABS : 1K0 907 379 BH
1.6 TDI

PCR2.1 /

THX

[doctordiag]

HELLO I NEED HELP CODING ABS
ABS 1K0907379AP
AUDI A3 r 2.OL
TRANSMISION DSG QG6 AUTOMATIK
VIN WAUZZZ8P7AA038269

[hid3]

Hello guys,

Please see the post where I listed all the information required.
Some of you aren't even providing what is a car in question....


Doc diag, LHD or RHD?

[ibsta]

Hi Vagva and Hid3,

Hope you guys are doing well and can provide me with a long code for my vehicle, see information below:

1. Model: VW GOLF MK5
2. 56 Plate (2006)
3. VIN:WVWZZZ1KZ7B077270
4. Right hand drive
5. 2.0L Diesel
6. FWD
7. I am not sure about the PR number however i have attached a picture of the section on the sticker that i believe is applicable.

409888

Are you able to also provide the Login and Soft code too?

thanks!

[doctordiag]

HELLO I NEED HELP CODING ABS
VIN WAUZZZ8P7AA038269
ABS 1K0907379AP
TRANSMISION DSG QG6 AUTOMATIK
car AUDI A3
engine 2.0l
left hand drive

[hid3]

Doctor, please try this coding:
1442601209250002280D06EA902200423800

[Bauto]

Hi.
Need long code for my car please,ABS pump number in car is : 1K0907379AN, hope you can give it to me, i have changed my cluster to an newer one.
Cluster 1Z0920843M Octavia 1.6 cr tdi dpf CAYC vin number : TMBGT61Z2A2032525 , but oringinal vin number in cluster before was : TMBKT61Z5B2173665 , (same car, same engine)
Need both long codings, thank, have a nice nigt all :-)

[calimax]

hallo Bauto

ESP MK60EC1 win:TMBGT61Z2A2032525


LHD 113B001C092500FC001000E6901E00000000

RHD 133B001C092500FC001000E6901E00000000


ESP MK60EC1 win:TMBKT61Z5B2173665


LHD 113B001C092900FD001100EA901E00000000


RHD 133B001C092900FD001100EA901E00000000

pls try and report

[Bauto]

hallo Bauto

ESP MK60EC1 win:TMBGT61Z2A2032525


LHD 113B001C092500FC001000E6901E00000000

RHD 133B001C092500FC001000E6901E00000000


ESP MK60EC1 win:TMBKT61Z5B2173665


LHD 113B001C092900FD001100EA901E00000000


RHD 133B001C092900FD001100EA901E00000000

pls try and report

Hello
Tried both codes, both codes rejected, so they do not work.
By the way, sorry forgot to say to you that it is a LHD :-)

[swingman26]

Vin : wauzzz8x6gb01846
abs unit is http://www.tlemcen-electronic.com/forum/images/icons/icon1.gifboitier 6c0-907-379-L

[bugarcek]

HELLO I NEED HELP CODING ABS
ABS 1K0907379BD MK60EC1 H31 0108
IMP: 377 WSC 35110
VW CADY 2010 1.6 TDI
TRANSMISION MANUAL 5
VIN WV1ZZZ2KZBX241295