ORANGE 5 clonned

[lion0304]

Does someone already buy copy Orange 5? I'm looking for info
http://www.fvdiobd.com/oem-orange5-professional-programming-device-with-basic-module.html

[autoTkey]

At this price I doubt it's a clone. It's almost the same as the price on the Orange website. Besides - on the link you've posted is written OEM.

[karalada]

Clone but includes - Immo HPX 9V0

[lion0304]

OEM china meaning clone device. Also listing show cannot update.
I have no any experience with orange 5 and on ali, the original with adapter around thousand $

[123Robby]

Does someone already buy copy Orange 5? I'm looking for info
http://www.fvdiobd.com/oem-orange5-professional-programming-device-with-basic-module.html

Hello,

Orange 5 seems to be a Eeprom programmer.
Often, you can extract the dump of an Eeprom with a programmer and modify it with the software given with the Orange 5:stung:

[ttzag]

Better by from dealer ..for link above its without immo hpx

[paul_12345]

Better by from dealer ..for link above its without immo hpx

nope.. this is a clone by the look of things and from downloading their software they have immo software and NEC software but only a couple from the radio software.

Here is all the immo images from their software if anyone wants them; https://mega.nz/#!eoNQQaRA!u1r5kYYjtl2VXDuh8W5Fh39m_1J6IsW7C-cZHssurgw

[metalik]

Someone try this clon? Its worth of money.

[dave11674]

i heard the guys selling genuine orange 5 were hard to talk to and you dont get much in the line of customer service !!

[sparkz02]

I got original orange5, I haven't used much there is a massive internal forums where you can get your stuff answered

[siyadk]

confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set

i would have bought it and tested to review it, but i dont have much of eeprom works these days to give a good review

[whiskeyman]

right got this in today
very easy to install
all functions open 1 - 10 exept car radio get error
tested reading usual eproms all good
tested tms370 with adaptor board did not read so maybe bad adaptor board

tested immo login code from dump ,tms vw works

will test as i go

if anyone want to send a file to test feel free

[lion0304]

right got this in today
very easy to install
all functions open 1 - 10 exept car radio get error
tested reading usual eproms all good
tested tms370 with adaptor board did not read so maybe bad adaptor board

tested immo login code from dump ,tms vw works

will test as i go

if anyone want to send a file to test feel free

Hi M8

Thank you for reply your first experience. TMS370 i read yesteday with UPA but need making adapter.
Check your soldering from TMS370 adapter.
I like this with PCF7941 renew, maybe will work for PSA remote?

[paul_12345]

Hi M8

Thank you for reply your first experience. TMS370 i read yesteday with UPA but need making adapter.
Check your soldering from TMS370 adapter.
I like this with PCF7941 renew, maybe will work for PSA remote?

Well the original does not work with PSA so I dont think the clone will

[whiskeyman]

The adaptor solder ok
i run over it with iron
be summit else
no big deal
dont see many now

[stalonerambo]

is it possible , orange hand book/manual, where can i find it?, thanks friends, ;orange clone is 229 usd, how much is the original one?

[metalik]

Orange-5 price is 350 EUR, immo hpx software 300EUR.

[paul_12345]

Orange-5 price is 350 EUR, immo hpx software 300EUR.

and then all the adaptors

[whiskeyman]

tried to read 1d69J with adaptor

failed

[81zx]

I read today 1d69j adapter success

[whiskeyman]

I read today 1d69j adapter success

can you show me screen shot
maybe I got bad adaptors
or machine faulty

[lion0304]

Orange-5 price is 350 EUR, immo hpx software 300EUR.

Price for Original withh all adapters + same software around thousand $.

[whiskeyman]

well after resolder joints on hc05 adaptor get a perfect read 169dj

[lion0304]

well after resolder joints on hc05 adaptor get a perfect read 169dj

I did for all devices when i receive in hands.

[vlado kljucar]

buy original , not expensive for that money,and work everything from a list, have it over 3 years never problem...

[whiskeyman]

This is about the findings on the clone not original

next

[vlado kljucar]

This is about the findings on the clone not original

next

and i give @lion ADVICE to buy original, he open this thread not you :)

next

[lion0304]

and i give @lion ADVICE to buy original, he open this thread not you :)

next

Thank you for advice, but this threat is for the clone found in market.

Also i'm electronican more than 20 years and i know what work or not with original and clone devices.

My budget is not unlimited, so like most peoples, we can't buy all original we need each time.

No one can use 100% each device he has. When we do this job, we need several device for 1 job.

So, if the clone can make one step that my others cannot do, i'm happy with that.

Importance is at the end, i make my job in time and earn my job money.

That is my expirience and my choice too.

[paul_12345]

buy original , not expensive for that money,and work everything from a list, have it over 3 years never problem...

and in that 3 years how much immo software has been added? They were the first main locksmith tool to write pcf7941 and still only 1 key supported.. just look at the ????? MK3 must have made already.

I couldn't justify the cost of the original but will probably get a clone... maybe if the clone gets some use then might consider getting the original.

[Siham]

At those days ,the enigmatic question is not to choose between clone or original but in how many time you will get your money back and starting to make benefit.:giveup:

Why we must pay for original tool like tango or O5 when scorpio cannot or are not able to protect their hardware and soft ?Or maybe they do not want to do it? who know!
:shame:
Look at Tmpro NEVER cracked both HW and SW ,hand have some unique module !
Even updates are no more a problem for clone tool . why original manufacturers off all tool does not make fair price! I own original Upa because price is fair and worth it .
Today the guys who own a TM100 and payed 1/4 of tango price will get the same updates of the guys who payes 1200 Eur for it !! This is sad but this is the reality.:palm2:

Kind regards Mates ! :)

[paul_12345]

At those days ,the enigmatic question is not to choose between clone or original but in how many time you will get your money back and starting to make benefit.:giveup:

Why we must pay for original tool like tango or O5 when scorpio cannot or are not able to protect their hardware and soft ?Or maybe they do not want to do it? who know!
:shame:
Look at Tmpro NEVER cracked both HW and SW ,hand have some unique module !
Even updates are no more a problem for clone tool . why original manufacturers off all tool does not make fair price! I own original Upa because price is fair and worth it .
Today the guys who own a TM100 and payed 1/4 of tango price will get the same updates of the guys who payes 1200 Eur for it !! This is sad but this is the reality.:palm2:

Kind regards Mates ! :)

To be fair I think the only thing protecting TMPRO is the price!! Because the hardware seems like it should be easy to clone but all the cloners know they cough up all the money to get all modules, then they sell clone for say 1000 usd

then clone maker number 2 just has to buy the clone so there outlay is very little. and its not like AVDI clone where the clone is hard to clone.

[Siham]

Ok ,will not speak about avdi clone , if so ,kess ,fg ,tango and many others tool that as been cloned and working good or at least worth the prices that cloners sells us .
All those tool are expensive $$$ ,do not think that a full tmpro2 can be more expensive them . :)
And trust me ,if Tmpro was so easy to clone or crack company like fly will already done it ,mate :)
No one will try to clone an expensive tool without having some K $$$ in his account .
If any company can clone TMpro and make it work as the original and selling it at 1500 Eur ,i will be the first to buy it and many other will do it also. :)

Regards Dude :)

[Cardiag.ru]

And trust me ,if Tmpro was so easy to clone or crack company like fly will already done it ,mate :)

Dude, if you think that TMPro can't crack then you are mistaken :)
And if Bogi thinks that burning pins on pic30 he will prevent to crack/clone, he is mistaken too :D
You must think of another better and whether - is that device so good that it to be cloned :)
Personally I don't see in it anything interesting that it was an applicant for cloning.

[Siham]

i never sayed or thought it can't be cracked ,anythimg made by human can be cracked or cloned by another human. :)
What i'am trying to explain is that TMpro not seam to be so easy to be cracked ,because no one cracked it at this day.
This devise have some unique module that other tool doesn't have ,like range rover or fiat and some other also .
What i would like to explain is why bother to pay thousand of $ when another one with cloned tool can do the same job like the one who bought original one ,like tango or O5 , and get the same update like original one ,see Tm100 ,and it make it more interessant to buy instead of tango . :)
Time ago Gwee sayed that Tmpro MCU as been cracked but still no news ,also why no other company like Fly or Scorpio never added some module that are available from Tmpro ? :)
At this day each one copy each other. :D

This is my point of view :D

BEst regards !

[paul_12345]

Dude, if you think that TMPro can't crack then you are mistaken :)
And if Bogi thinks that burning pins on pic30 he will prevent to crack/clone, he is mistaken too :D
You must think of another better and whether - is that device so good that it to be cloned :)
Personally I don't see in it anything interesting that it was an applicant for cloning.

Isn't TMPRO a PIC mcu using FTDI chips ID for security?? So just dump the MCU and fake the ID of FTDI and its cloned? or is the 8 pin IC secure memory or similar?

[vanos batam]

Before i have problem with tmpro.
First one tmpro active with 5moduls problem Burned PCB.
So i order TMpro basic (without active modul) just swape the ftdi and bigger procesor.. it work..

[big633]

Link to buy orange 5 and price
mc908lj24 and atmel 45db081d is secured
orange can read and write ?
have any one test it

[mikroel]

I guess you got the software immo HPX 9.0 with the device?

from whom you bought it?

[lion0304]

The link is forst page and first post. You need to read all the posts if you want to know.

[mikroel]

Yes ,I saw that link and i have already made contact with them ,but I wanted to see if the Whiskeyman bought from them and how is he satisfied with device quality ?

[daxxer]

who have some link where to buy Orange clone for good price and good quality ?

[whiskeyman]

got mine from uobd2

[ruffles1986]

For TMS try to heat up with hot air when go to read

[electronistul21]

i try many time buy original orange 5,i send email,not respond,did me talk with distribuitors.in this case i prefer buy clone.

[whiskeyman]

For TMS try to heat up with hot air when go to read
the chips i have read fine with xprog without heat
must just be duff adaptor
even after i resolder

[electronistul21]

chinese UPA have adapter for TMS and work very fain.can use this adapter with original UPA.

[janake]

who have some link where to buy Orange clone for good price and good quality ?

see here http://www.digital-kaos.co.uk/forums/showthread.php/527851-orange5-addon-softwares

[HeXeN]

Quality build is same as xprog. Received it few days ago. All adapters should be resoldered just in case.
(Got it from fvdiobd dot com)
380432

[mikroel]

Not bad at all ,I have received mine few days ago and already did few cars .Immo sw included and also activation for other sw . not all adapters included but there are many seller on the web where it can be buy ,original .


Sent from my iPhone using Tapatalk

[neverquiet]

Has anyone had to chance to test the
Immo HPX 9V0 function.
I am interested in the Nissan Nats funtions.
383345

[actionx]

Hi ive read immo just waiting on transponder to see if it will make it but reads dump ok


Has anyone had to chance to test the
Immo HPX 9V0 function.
I am interested in the Nissan Nats funtions.
383345

[dimet]

Has anyone Orange 5 clone with worked car radio function?

[mikroel]

Yes ,there is option 03-CarRadio.I didn't use it but it can be done

http://uploads.tapatalk-cdn.com/20160705/e4789968b4a3f028d1d2fe0225898c47.jpg
Sent from my iPhone using Tapatalk

[ngt5]

..........

[ngt5]

i try many time buy original orange 5,i send email,not respond,did me talk with distribuitors.in this case i prefer buy clone.

from original O5 write here: http://www.scorpio-lk.com/eng_index/index.html

[kostik]

Original O5 386700386701

[tehnosoftex]

Hi, I just tried today to reset a pcf7941 with orange clone. It last about 30 seconds and I get an error: "error 3 . please try again, bit0" but the transponder is somehow unlocked but cannot prepare with effi or fvdi. I think it isn't properly erased.

[HeXeN]

It doesn't work only for chrysler renew?

[albertros]

Hi,
when I got mine I resoldered everything, replaced the zif socket with a 3m one and found a cap missing (chipped off)

[tehnosoftex]

It doesn't work only for chrysler renew?

From what I understand from that pdf it must work on any locked 7941.

[paul_12345]

From what I understand from that pdf it must work on any locked 7941.

no... it can 'unlock' any but that just means erasing it, which would leave it useless without writing a data file like the chrysler file.

[tehnosoftex]

no... it can 'unlock' any but that just means erasing it, which would leave it useless without writing a data file like the chrysler file.

Yes but then it can be prepared with effi or fvdi for being used with other cars IE astrah.

[paul_12345]

Yes but then it can be prepared with effi or fvdi for being used with other cars IE astrah.

yes but the remote wont work.

[Bllinda]

From what I understand from that pdf it must work on any locked 7941 (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=400098&d=1474969400).

Here the file is needed ....

no... it can 'unlock' any but that just means erasing it, which would leave it useless without writing a data file like the chrysler file.

[Bllinda]

I think that really will not work ast.raH remote control
yes but the remote wont work.

[keysmith]

The same can be said for the original. The quality on the original looks like it was built by the lowest bidder.

[weza247]

hI actionx did it work ok on the nats 5/5.6 ?

[912secured]

Yea the Tm100 info was ripped out of tango. Then they got the soft working. I do not think they cracked the dallas 5003 micro. Did a ghetto in out fix like they did on the avdi. I bought a clone orange 5 because original took a shit. We need put remote data up for all chrysler keys and anything that uses 7941 to make orange immo reset more usefull. Have been logging out put of orange and mk3. Thought about making a device but by time done mk3 clones will be out. tnt enforcer opens up tm100 soft that needs paid for and alot of mk3's software options. Hey why unpack exe go through all the hassle, just run xp and tntenforcer.

[paul_12345]

Yea the Tm100 info was ripped out of tango. Then they got the soft working. I do not think they cracked the dallas 5003 micro. Did a ghetto in out fix like they did on the avdi. I bought a clone orange 5 because original took a shit. We need put remote data up for all chrysler keys and anything that uses 7941 to make orange immo reset more usefull. Have been logging out put of orange and mk3. Thought about making a device but by time done mk3 clones will be out. tnt enforcer opens up tm100 soft that needs paid for and alot of mk3's software options. Hey why unpack exe go through all the hassle, just run xp and tntenforcer.

I brought a very cheap logic analyzer to log vvdi prog writing to pcf7941 and its very easy to see the data being read - just shows how sh*t orange 5 immo software is not to have added mk3 options.

[whiskeyman]

where get this tnt enforcer?

[Weasel3]

This is one of them.

http://www.savagecircuits.com/index.php/reviews/52-saleae-logic-analyzer

From text - scroll down:

All in all I think the Saleae Logic analyzer is a great diagnostics tool and I would recommend it to both beginners and seasoned engineers. It's inexpensive, portable, reliable and Saleae continues to make improvements to the software. It also carries a 2-year warranty, which is great for a diagnostics tool. In future episodes of Savage Circuits TV we will be covering some examples of debugging and troubleshooting using a logic analyzer and the Saleae unit will be featured in these episodes. If you have any questions or comments please reply below and I will try to pass on any important information to Joe at Saleae. You can order your Saleae Logic Analyzer here.

https://www.saleae.com/?gclid=CJP_6sqX-88CFQHncgod7NwAVQ

This could be used with remotes, and debugging them for the KD9xx tool or Samic's newest tool?

[paul_12345]

This is one of them.

http://www.savagecircuits.com/index.php/reviews/52-saleae-logic-analyzer

From text - scroll down:

All in all I think the Saleae Logic analyzer is a great diagnostics tool and I would recommend it to both beginners and seasoned engineers. It's inexpensive, portable, reliable and Saleae continues to make improvements to the software. It also carries a 2-year warranty, which is great for a diagnostics tool. In future episodes of Savage Circuits TV we will be covering some examples of debugging and troubleshooting using a logic analyzer and the Saleae unit will be featured in these episodes. If you have any questions or comments please reply below and I will try to pass on any important information to Joe at Saleae. You can order your Saleae Logic Analyzer here.

https://www.saleae.com/?gclid=CJP_6sqX-88CFQHncgod7NwAVQ

This could be used with remotes, and debugging them for the KD9xx tool or Samic's newest tool?

I brought the clone version for a few dollars, it would be no good for kiydiy remotes because the data in encrypted.

it can be used to sniff data to pcf79xx, although it logged the read not too bad but might not be good enough for the write as it didn't seem to log properly, so would need something better probably.

[Zeddy]

Tried reading hc05 (x32) on a merc e-class w210.
Failed!!
not sure adapter or chip.

[daxxer]

Tried reading hc05 (x32) on a merc e-class w210.
Failed!!
not sure adapter or chip.

i read HC05x32 with O5 clone success, make picture of your adapter and check soldering points :listen:
when you want to be 100% sure, better to resolder all point on them ;)

[lidons]

i read HC05x32 with O5 clone success, make picture of your adapter and check soldering points :listen:
when you want to be 100% sure, better to resolder all point on them ;)

I do not think, that this is the problem in welding. I think it is in the voltage, that sometimes it loses, first to make BOOT, and when of OK then to read, if you change manual of a value smaller to 5v to read to 5v down to the right, this error tries, also When you do a bad reading the info of the MCU modifies it to you, be careful to read an original MCU or it will be damaged.

[digimile]

hi
is it good for renesas mcu or not ...need only for airbags
thanks

[f2f2]

I bought the original Orange5 programmer
It is more expensive than the clone
but I did not dare to risk it because of the quality.

Today arrived
I tested the Motorola HC908 family
Security bytes readout in-circuit mode
Now three test panels
AZ60A, LJ12 100% works ...
min 2 sec max 5-6 minute
this good technic

[obdsystems]

Also bought genuine Orange 5 - Fed up of clones not working.
done few AZ60


Expect will do same with Tango as Fly don't seem want to fix bugs with TM100, just sell new software

[tehnosoftex]

My orange didn't read correctly tms370 from immo box opel astrag. I presume that can be from the adapter. I attach pictures with the adapter.

[elmelor]

You should weld everything, try that, it will surely work in a good way.:stung:

[tehnosoftex]

I try to resold everything but the same problem. I am not sure about resistors value. I change the 74hc74 but the same problem.

[stalonerambo]

how much is the orange clone now, i am thinking to buy it ,,, i need a new tool to read , things released after 2014-

[mikroel]

Jtag is not good


Sent from my iPhone using Tapatalk

[salao]

I need finware orang5. help me.

[vageric]

I need finware orang5. help me.

by original and problem fixed.

[m3touk85]

anyone tried read NEC with orange 5 clone ??:??

[hk06]

i read nec with orange clone . no probleme

[mikroel]

Has anyone had to chance to test the
Immo HPX 9V0 function.
I am interested in the Nissan Nats funtions.
383345

Yes
https://uploads.tapatalk-cdn.com/20170416/9b2c58fe9c2ee4448f4ec2189f87d252.jpg


Sent from my iPhone using Tapatalk

[Manuelgb]

Hello
I want to buy this programmer, works fine clone? or better compare original and what price does it have? . regards

[lion0304]

Hello
I want to buy this programmer, works fine clone? or better compare original and what price does it have? . regards

Mine is clone and work very well, EZS HC05 on adapter, Nats BDM, 307, 206 BSI BDM ......
But before using, need rework on all solder joint and cleaning all adapter.....

[lion0304]

It made this adapter to working with Nissan NATS, tested NATS 4 easy work, not have NATS 5 for test yet

[Asifmehmmod1]

i tried many time to read RH66 but not able to read it using clone orange5.it is simple 66 serial eeprom. anyone have luck with this?

[trinicolin]

Got this message when I tried to read BCM2 uPD 70F3381. Checked voltage at connection and got way below the required 3.26V. Any suggestions?https://uploads.tapatalk-cdn.com/20171122/52431e1d1a7f071de43a2bbd4e7d6951.jpg

Sent from my SM-G930F using Tapatalk

[immokill]

I have orange5 original and did not read elv from.a6 4f

[drugowaz]

It made this adapter to working with Nissan NATS, tested NATS 4 easy work, not have NATS 5 for test yet

I want to make this adaptor. Can you tell pinout like in picture. What to what connect?

[mikroel]

Connection diagram is inside orange5


Sent from my iPhone using Tapatalk

[lion0304]

I want to make this adaptor. Can you tell pinout like in picture. What to what connect?


Here it is. More clear than manual.

All in one page for easiest working on bench

[drugowaz]

Good. Here i see 500ohm resistor. But found officual orange manual diagram. There is 2kohm resistor

[lion0304]

Good. Here i see 500ohm resistor. But found officual orange manual diagram. There is 2kohm resistor

560 Ohm or 2k, not important here. Only use for current LED brighning

[drugowaz]

Got it :) led regular diode?
https://www.elprocus.com/wp-content/uploads/2017/01/What-is-a-Light-Emitting-Diode.jpg

[lion0304]

Got it :) led regular diode?
https://www.elprocus.com/wp-content/uploads/2017/01/What-is-a-Light-Emitting-Diode.jpg

Yes the LED like that. Resistor using for limited reverse current that can detroy the led.

My LED use 12V so 560 Ohm give me good luminosity. Usual Led use 12V need 560 ohm resistor.

[drugowaz]

hi,can anyone full words?

gnd ground
RXD ...?
TXD..?
RST reset
OSC...?
PDX...?
VCC power feed
AS..?
VL...?

which one is bkgd pin by orange shortquts?

want to read s9s08dz60

[dorofteius]

I tried renesas m32c M30879FK from rcd210 Vw , and it is just not working.
It reads flash partialy then error .

BKGND is RXD. Push info on the programmer and you have all you need.

[redliner]

Hi everyone This is my second attempt to reset pcf7941 using Orange5 I will share what I discovered, maybe someone has gone further and can share knowledge.
At the beginning I will say I did not have the Chrysler used key to test with pcf7941. With the Orange5 info it's written that can unlock any pcf7941 so I used some Vaux/Opel keys , desolder chip and try it . I put the Chrysler data and it didn't unlock at all. Programmer start to do the job and get "error 9" at the end, chip still locked and frequency working as before.
490134
another test was with completely blank new chips and was written correctly but it can be only used for Chrysler fobik keys that I don't have possibility to test with the car.
My thoughts are that maybe it does not unlock these chips because they really are not pcf7941 as it's different mark on them and they may only recognized by the readers as pcf 7941.
I go furher and I got the data for pcf7941 Insignia astra J 2 button key and try use this instead of Chrysler.bin file. I thought that it should work but the error come out se picture.
490137
As we can see the Orange5 software is secured and the other file then Chrysler.bin can't be used.
My question is did someone brake this or know what to do to use different file?. Unlocking Orange function is useles for now as it's not unlocking at all only writte Chrysler data on empty chip.

[abu deab]

Hi all my friends please help
I am in the process of acquiring an O5 product but I do not want to fall victim to cheating and deception as the previous time
How do I distinguish the original product from the cloned?
Please help and have some pictures
you're welcome

[Cromwe11]

Hi all my friends please help
I am in the process of acquiring an O5 product but I do not want to fall victim to cheating and deception as the previous time
How do I distinguish the original product from the cloned?
Please help and have some pictures
you're welcome

Clone has blue pcb’s original has green and red. If you really want to make sure your buying original then buy through your local distributor http://www.scorpio-lk.com/eng/distributors_eng.html

[bubik]

Orange5 Clone Can supported St92Fxxx microcontroller?

[milzal]

In instalation is not file for support ST92Fxxx , bu anybody have it maybe. I have interest for this file to clone too.

[rob h]

The original just releases a update!

[mikroel]

Where you see that?


Sent from my iPhone using Tapatalk

[rob h]

Tango forum, (closed forum)

Section Orange5

Orange-5 ImmoHPX 10
Postby admin » Sun Dec 24, 2017 12:23 pm

[amigokola]

Is there a chance that someone here share connections (pictures) from IMMO HPX ??

[lion0304]

Is there a chance that someone here share connections (pictures) from IMMO HPX ??

Here you can find all:
https://mega.nz/#!5VIDxDiA!zKWw-P-1Qz3wrIavCtW7WCrctWvhLsgbV6Dg6_Q-DIM

[Asifmehmmod1]

I just killed my clone orange5. i forget and connect with original software and after that device is no longer responsing.Any help?

[vageric]

I just killed my clone orange5. i forget and connect with original software and after that device is no longer responsing.Any help?

for that money buy a new one!

[u.s]

There is a certain member that is offering a replacement MCU to make the clone into an original.
It's the same member who does the xprog MCU and also the 'online' carprog MCU, which doesn't actually work online....

Edit: actually I think it's just a chip to bring your clone back to life, may not be clone to original chip, got lost in translation.

[koyot]

that actually nothing works

[mike255]

hmmm this sounds interesting but how can he make a clone into a original

when there license is tie to the firmware

[mike255]

contact the person who sold it you and they should be able to fix it

[mike255]

it is good for people to share the information
i have already shared some information which everybody was not sure how to do.
for the actual connection for XTAL 1 to the orange programmer

and my solutions works 100%


the more information share the more we all know how the orange 5 works and over come problems.

[lion0304]

Orange 5 clone need reverse TX and RX.

[blesaidoss]

Hi whiskeyman, how's the going with the orange5 clone, also considering buying one.

[whiskeyman]

Very good
now have 2
does what I need

[mike255]

orange5 is a learning tool at the moment im reverse engineering it

[InchisNonStop]

My clone got bricked by the ori software. I'm looking for a viable solution if possible to revive it.

[junmab]

Any one has picture how to connect the Orange 5 clone to a Yamaha Tenere XTZ660 with 68HC908LJ24 ?

[gljuk]

Better do 68HC908 with desoldering. I had no success reading any HC908 ISP.

[mitaka1970]

Hello. is there any quality picture of the programmer. I'm interested in the marking of the item I've noted. thanks in advance.515185

[redliner]

Please can someone tell me how to read CIM Astra H MC68HC12DG128 I am not sure if I doing right or it's something with the programmer.
I was told the eeprom data is corrupted after reading.
I firstly press the "read F-sec" button as from picture no.1 then read ID and after that green "R" and save the file on HDD.

[datapage]

100 ok . repair now 12v adpter.

[mikroel]

I have a lot of good scripts for airbag , car radio and dashboard

Orange5 works very good

https://uploads.tapatalk-cdn.com/20180412/e3e0820c5ae0c8ca2d2632546f638002.jpg


Sent from my iPhone using Tapatalk

[lion0304]

I have a lot of good scripts for airbag , car radio and dashboard

Orange5 works very good

https://youtu.be/-wp9NzVQtxU


Sent from my iPhone using Tapatalk


YOu want to share or sell?

Selling will ban you here.

[mitaka1970]

thanks datapage !!

[mikroel]

YOu want to share or sell?

Selling will ban you here.Thank you for warning me:applause:

Of course i know that !

This video shows to all those who have doubt on the possibility of orange5 programmer ,
or are maybe not familiar with the possibilities, what is possible to do with it.


Unfortunately, good scripts or calculators are not available for free nowhere on the internet ,and unfortunately not cheap.
I think all users here ,at least who use Orange5 seriously , knows very well who sells scripts and where they can buy it.
All scripts are locked to specific serial number of Orange5!!!

PS.I don't write them I just made it to work with my Orange5 clone.


https://uploads.tapatalk-cdn.com/20180412/b0fb818e3463e7ee40ff40d135a1744d.jpg

Thank you

[Asifmehmmod1]

i have basic orange5..no immo hpx and carradio..
but i have clone sofware with all these scripts.so can i use my original orange5 with cracked orange5 software ?
is it safe?
Thanks

[gljuk]

It should be safe. I have heard about using Original Orange5 programmer with chinese cracked soft. Thinking about the same now. Recently bought TNM5000 does not work at all. Think, that genuine Orange5 is my next programmer.

[mikroel]

It should be safe. I have heard about using Original Orange5 programmer with chinese cracked soft. Thinking about the same now. Recently bought TNM5000 does not work at all. Think, that genuine Orange5 is my next programmer.

Yes it is safe.


Sent from my iPhone using Tapatalk

[H2Deetoo]

Does anyone know where Orange5 clone v1.35 is available?

[lion0304]

Does anyone know where Orange5 clone v1.35 is available?

Here: https://www.aliexpress.com/item/with-full-Adapters-OEM-Orange5-Programmer-Orange-5-Programmer-With-Full-Packet-Hardware-Additional-Software/32826431252.html?spm=2114.search0104.3.21.863547b7 aI9Fo3&ws_ab_test=searchweb0_0,searchweb201602_1_10152_10 151_10065_10344_10068_10342_10343_5722611_10340_10 341_10696_5722911_5722811_5722711_10084_10083_1061 8_10307_10059_10534_100031_10103_441_10624_10623_1 0622_10621_10620_5722511,searchweb201603_19,ppcSwi tch_7&algo_expid=8f1acb2f-8209-41b5-bfdd-25f6fc62a9c5-6&algo_pvid=8f1acb2f-8209-41b5-bfdd-25f6fc62a9c5&transAbTest=ae803_1&priceBeautifyAB=0

[H2Deetoo]

Thanks, but it says v1.34 it seems:
Software Version: V1.34, Software Does not Support Update.

[lion0304]

So buy the original

[H2Deetoo]

Uff what a remark! If you don't have anything sensible to say then say nothing!

[lion0304]

Uff what a remark! If you don't have anything sensible to say then say nothing!

Take a pair of glasses and look at the thread's name. Maybe you can know what i talk about.

Or do you understand what your question meaning? Let us know when you find the chinese clone can be update.

[H2Deetoo]

This thread is about Orange5 clone right?
I ask a simple question if anyone has seen v1.35 clone version.

But forget I asked, I'm to tired to waste my time on you ...

[mikroel]

This thread is about Orange5 clone right?
I ask a simple question if anyone has seen v1.35 clone version.

But forget I asked, I'm to tired to waste my time on you ...

V1.35 version still doesn’t exist for clone ,only and last one is 1.34R1


Sent from my iPhone using Tapatalk

[redliner]

Please can someone tell me how to read MOTOROLA SECURED EEPROM I got CIM Astra H MC68HC12DG128 I am not sure if I doing right or it's something with the programmer.
I was told the eeprom data is corrupted after reading.
I firstly press the "read F-sec" button as from picture no.1 then read ID and after that green "R" and save the file on HDD.

nobody help?

[lion0304]

nobody help?

You need clic first to: SEC ->BOOT at the right.

After that clic on Read. This process use for secure MCU.

[ttzag]

orange5 can't read secured 912/9s12, you will lost data

[redliner]

You need clic first to: SEC ->BOOT at the right.

After that clic on Read. This process use for secure MCU.

can you confirm is it safe to do it as I don't want to screw something. My client Astra from far away has all keys lost and the pin from ecu and radio unit is different and refuse to key program. I advise to send me the CIM for pin read but I doing for first time.

[lion0304]

can you confirm is it safe to do it as I don't want to screw something. My client Astra from far away has all keys lost and the pin from ecu and radio unit is different and refuse to key program. I advise to send me the CIM for pin read but I doing for first time.

I did not work with Astra yet, but BSI with HC12DG128 3K91D without problem.

And if you want to know, read with xprog first, after read with Orange and compare 2 dumps.

Experience is doing by ourself.

[gljuk]

I did not work with Astra yet, but BSI with HC12DG128 3K91D without problem.

And if you want to know, read with xprog first, after read with Orange and compare 2 dumps.

Experience is doing by ourself.

When reading HC912DG128A with X-Prog, i have dump of 2mb. Two megabytes!!! While the chip has 128kb of flash. Orange5's dump is 128kb. So pointless to compare them. Maybe i am doing smth wrong...

[lion0304]

When reading HC912DG128A with X-Prog, i have dump of 2mb. Two megabytes!!! While the chip has 128kb of flash. Orange5's dump is 128kb. So pointless to compare them. Maybe i am doing smth wrong...

With Xprog, you can choose eeprom or flash separate

[gljuk]

Of course. I chose flash and got 2mb result. Am i unique or somebody can confirm chinese Xprog reading wrong?

[redliner]

I did not work with Astra yet, but BSI with HC12DG128 3K91D without problem.

And if you want to know, read with xprog first, after read with Orange and compare 2 dumps.

Experience is doing by ourself.

Thanks I will try when I back from holiday and will replay.

[mikroel]

Here are some screen shot of different calcs for original and clone

https://uploads.tapatalk-cdn.com/20180412/5dbdf8d1de51b989ff04511484a16e26.jpg

https://uploads.tapatalk-cdn.com/20180412/8abc5b22f81f153fac72e71d7ed61e60.jpg

https://uploads.tapatalk-cdn.com/20180412/389b08aab2cfc2797a7b644074e62bf3.jpg

https://uploads.tapatalk-cdn.com/20180412/9707bfdaa31bcd72047d086e9a7f9e59.jpg


Sent from my iPhone using Tapatalk

[letalcrudo]

:crushed:hello experts. I've just bought a clone orange 5. and I´m tryng to read a MCU MB91F061BS (Kia Picanto 2016)

but I can´t see that series on the menu. what do you think I can do guys? or it was a waste of money? thanks

521087

[redliner]

You need clic first to: SEC ->BOOT at the right.

After that clic on Read. This process use for secure MCU.

I did as you mentioned. I wait now for someone can calculate the pin from dump and I will replay with the result. Just not sure If the procedure can be repeated anytime when reading chip or it's one time only?.

[redliner]

eeprom MC9S12DG128 with 3L40K mask is recognized by orange5 as 0L85D is it normal ? 523597

[tehnosoftex]

Hi everyone, here is free orange with some airbag dash and carradio scripts. Some of them require some modification to work and I hope to make it together. I'm still improving my hpl knowledge.

https://mega.nz/#!JlsWjKzb!LBETk-MXtbC2YiGrulR0hqAW_kMr9KTqJBafrKhcNcs

[Unl0cker]

connected my clone orange5 to original software and it killed it
how to solve it?

[mikroel]

connected my clone orange5 to original software and it killed it
how to solve it?

No way to solve it .



Sent from my iPhone using Tapatalk

[gljuk]

The only way is to order flashed Atmel MCU. It costs almost as much as new chinese Orange.

[pocinas]

When reading HC912DG128A with X-Prog, i have dump of 2mb. Two megabytes!!! While the chip has 128kb of flash. Orange5's dump is 128kb. So pointless to compare them. Maybe i am doing smth wrong...


Have the same with MC9S12H256VFVE , xprog read 2Mb flash file, off course i choose flash, eeprom is read 4kb.

will order Orange5, cant find many 2mb files for Xprog, much more is normals 256 kb files.


Edit 12.09.2018

Ordered ORANGE 5 clone, adapters maybe need little bit solder points and clean.
At the moment programmer works PERFECT
with MC9S12H256VFVE and make 4kb eeprom file and 256kb Flash File

[immokill]

I just readied Jeep Grand Cherokee 2003 skim mcu and orange does it with autobaudrate Read good, pin code in first row 4 first numbers after ff ff ff ff

[tomasz3k]

can someone match this soft to the orange clone?
https://mega.nz/#!V3QWya5b!9YU0FDz0RXESv92LXqZKpOlxs8YXWUTYK63k6l3 ienY (https://mega.nz/#!V3QWya5b!9YU0FDz0RXESv92LXqZKpOlxs8YXWUTYK63k6l3 ienY)can someone match this soft to the orange clone?

[pocinas]

can someone match this soft to the orange clone?
https://mega.nz/#!V3QWya5b!9YU0FDz0RXESv92LXqZKpOlxs8YXWUTYK63k6l3 ienY (https://mega.nz/#!V3QWya5b!9YU0FDz0RXESv92LXqZKpOlxs8YXWUTYK63k6l3 ienY)can someone match this soft to the orange clone?


You can match self
http://blog.uobdii.com/free-download-oem-orange5-v1-34-software-and-adapter-schematics/#1
www.scorpio-lk.com/downloads/Orange5/orange5.rar

[lidons]

hi is it possible to update the orange 5 to a newer version?
I need to read MCU Fujitsu MB91F013 and in the version with which it is not supportable

[rob h]

You brick it, using original software.

iprog+ does the mb91f013



hi is it possible to update the orange 5 to a newer version?
I need to read MCU Fujitsu MB91F013 and in the version with which it is not supportable

[2angel]

I'm interested if this clone of orange 5 is good for reading motorola in mercedes EIS/EZS

[Feeze]

I'm interested if this clone of orange 5 is good for reading motorola in mercedes EIS/EZS
906 EZS did around 20 times with clone/ each one successfully,
Also done Vito, Viano

[Kocta]

Hi, tried somebody Read HC908LJ24 ???

[PaoloDigital]

cina copied tool

[elremont]

I tried renesas m32c M30879FK from rcd210 Vw , and it is just not working.
It reads flash partialy then error .

BKGND is RXD. Push info on the programmer and you have all you need.

I now try M32C with orange 5 clone and get error after two seconds read,maybe you have solutions?

[hesham10]

i read nec with orange clone . no probleme
thanks but all nec d70f works good and what clone do you have ? first http://www.fvdiobd.com/oem-orange5-professional-programming-device-with-basic-module.html
second https://www.ecutool.com/OEM-Orange5-Professional-Programming-Device-with-Basic-module_13021.html

[rtvrtv]

Good and cheap 105 dollars
doing every chip
motorola
tms series
st series
upd70 and renesas
eeprom series
All 25 series
so wonderful

[milzal]

Hi everyone, here is free orange with some airbag dash and carradio scripts. Some of them require some modification to work and I hope to make it together. I'm still improving my hpl knowledge.

https://mega.nz/#!JlsWjKzb!LBETk-MXtbC2YiGrulR0hqAW_kMr9KTqJBafrKhcNcs

Hi, this will work with clone orange5 ? Is anywhere pack calculators for orange5 ?

[whiskeyman]

only one i have struggled to read so far is tms chips
have two units and both same
xprog reads chip no problem

[lion0304]

only one i have struggled to read so far is tms chips
have two units and both same
xprog reads chip no problem

Do you rework adapter? I rework all adapter and even with orange pcb.

[carradio2001]

Hi !

Somebody have this file ?

Regards,

[Radek2000000]

I have the same...... still error load HPL file..

[gselectric]

hii every one about motorola did anybody managed to read it with orange 5 i tried with soft schematic and it failed it is for ranger dash 2002 same as mazda pickup b2200MC68HC05L28 (https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahUKEwiHvpGw2pLmAhWMnxQKHbKmBysQFjAAegQIARAC&url=https%3A%2F%2Fwww.etlweb.com%2Fdoc%2Fhc05l28.p df&usg=AOvVaw0uXX-vJZxH84ocJjUA_cl2)

[gselectric]

hii every one about motorola did anybody managed to read it with orange 5 i tried with soft schematic and it failed it is for ranger dash 2002 same as mazda pickup b2200MC68HC05L28

(https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahUKEwiHvpGw2pLmAhWMnxQKHbKmBysQFjAAegQIARAC&url=https%3A%2F%2Fwww.etlweb.com%2Fdoc%2Fhc05l28.p df&usg=AOvVaw0uXX-vJZxH84ocJjUA_cl2)

[momo59]

Hello
Who’s have software for this serial
0503-1902-0007-F5AB-FEDF-7229-46D9-D42A
With renesas nec working
Thank you

[Tubarrete]

http://www.fvdiobd.com/v135-orange-5-programmer-with-adapters.html

2020 New V1.35 Orange 5 plus Programmer


Added more functions (click to download the added functions)


Important!


our V1.35 Orange5 don't support V850 renesas.
Our old version V1.34 Orange5 support V850 renesas.


i just received new v1.35 clone and renesas its not working

With older v1.34 its ok

[Holmae]

You can match self
http://blog.uobdii.com/free-download-oem-orange5-v1-34-software-and-adapter-schematics/#1
www.scorpio-lk.com/downloads/Orange5/orange5.rar (http://www.scorpio-lk.com/downloads/Orange5/orange5.rar)

hi i need to have Immo HPX 9V0 for clone orange 5please

[Holmae]

I have the same...... still error load HPL file..

HI HAVE YOU SOLVE YOUR PROBLEM PLEASE

[Agilechaveiros]

Hello friends
I just started my experiment with orange5 v.134 clone programmer
have problem with the P1 AS kline adapter
did any friend have the same error?

[marekajs]

Hello friends
I just started my experiment with orange5 v.134 clone programmer
have problem with the P1 AS kline adapter
did any friend have the same error?

can you offer me wrong info. picture to check?

[Agilechaveiros]

Hello, this is the error, like the one in the photo

[ASCM]

http://www.fvdiobd.com/v135-orange-5-programmer-with-adapters.html

2020 New V1.35 Orange 5 plus Programmer


Added more functions (click to download the added functions)


Important!


our V1.35 Orange5 don't support V850 renesas.
Our old version V1.34 Orange5 support V850 renesas.


i just received new v1.35 clone and renesas its not working

With older v1.34 its okWhere can i buy that one which suport renesas mcu?

Sent from my SM-J415F using Tapatalk

[marekajs]

Hello, this is the error, like the one in the photo

you donot connect the chips?

[marekajs]

Hello, this is the error, like the one in the photo

dear, if you donot connec this adaptor, if there is any problem mentioned?

[Agilechaveiros]

even if i make a connection with immo i get the same error

[marekajs]

even if i make a connection with immo i get the same error

we do teamviewer for you to check?

[meha]

Do anybody have TMS adapter for orange5 wiring? Want to check for sure, because now it shows error 0000, rework is not helping, and also contact cleaning, etc. Same error when there is no chip

[ASCM]

Hello does anyone tried to read 3239
MCU bcm 2 Audi a7

Sent from my 5033F using Tapatalk

[boxsport]

hello guys...
does anyone have file ST92.hpx?
I need to read an ST92F120V9Q7 but i need this file....
Can anyone help me out?
Thanks

[meha]

try this, haven't read this type, but you can check,780014

[boxsport]

try this, haven't read this type, but you can check,780014

Thanks for the file mate...
But i still have issues..
Same error...
I think this file might be locked to only original serial numbers...
or its my O5 clone that doesnt have this license....

Thanks anyway...
i need to see how can i sort this out...

[meha]

Thanks for the file mate...
But i still have issues..
Same error...
I think this file might be locked to only original serial numbers...
or its my O5 clone that doesnt have this license....

Thanks anyway...
i need to see how can i sort this out...

File is from clone... working clone

[carradio2001]

The same issue. Orange-5 clone, not working ST92xxx

[boxsport]

File is from clone... working clone

Can you share a picture of your system info to see your serial and your licenses?
probably its a license issue, i dont know....
Thanks

[meha]

I can do this monday, but license is same as others have, just normal working clone, as i know common serial.

[carradio2001]

I can do this monday, but license is same as others have, just normal working clone, as i know common serial.

It is v1.34 your programmer ?

Carradio2001.

[shpuncik]

Thanks for the file mate...
But i still have issues..
Same error...
I think this file might be locked to only original serial numbers...
or its my O5 clone that doesnt have this license....

Thanks anyway...
i need to see how can i sort this out...

just tested on v1.36 clone and not working too. most likely license issue.

[Chupsy]

v1.36 read tms370 from opel perfect

[meha]

Mine won't read tms370

[zorro13]

just tested on v1.36 clone and not working too. most likely license issue.

Hello!
Is it possible to share v1.36 software that works with a Chinese clone? The seller sent me a faulty CD and now he has no idea what software programmer needs or what the serial number of the device is. Sad or funny? Anybody else have an idea how to proceed?

br

[fuzz1]

Hello
Was considering buying a clone orange 5. I saw orange 5 and orange 5 plus. Anyone tried the plus?

Does any orange 5 read mcu renesas?

Thanks

[ASCM]

Hello
Was considering buying a clone orange 5. I saw orange 5 and orange 5 plus. Anyone tried the plus?

Does any orange 5 read mcu renesas?

ThanksIm in same situation which one have better MCU support

Sent from my 5033F using Tapatalk

[obd.tech]

I'm also wondering what to purchase?
V1.34 or V1.35 or V1.36?? Standard or the plus version?

Thanks guys

[VeryFastSnail]

I was wondering about Orange 5 clone and just a random eeprom programmer from Amazon, brought the latter. I'm genuinely impress for 100 dollar price. It's called "SOFI SP8"

[redliner]

Hi
I read Nissan Qashqai J10 BCM 284b2 jd 12a by Orange5. There was only one option under Immo Mazda2 09- to read this MCU9s12xdt384(1L15Y). Read fine, Tango can show keys and login but I can't write new key. When I add .bin file information appear "Add key not tested" Wnen I write key or transponder pcf7936 info display "invalid crypto key" and it change chip page 3 from 06 to 0E making it crypto mode. Car has proximity twist on ignition/ key I tried original dealer key also blank pcf7936 and preceded for xtrail qashqai.
I tested also two random eeprom from DK file 4KB the same situation but one file 2kb write the key with no problem.
My question is did someone face this problem? where is the problem? can I use 2kb eeprom file with key from different car and write to my module with original flash?
813793
813794

[autoTkey]

Did you try with another key maker tool? Tango is not the only one.

[redliner]

Did you try with another key maker tool? Tango is not the only one.

no I did not. I have only tango key maker I Will upload files if someone can try to write on emulated chip like LKP03 can be errased so no lost. Please help
813813

[autoTkey]

VVDI2 EEPROM recognized and recorded it.
813830

[redliner]

VVDI2 EEPROM recognized and recorded it.
813830

Yes I know that, Tango same recognized but did not write new key only change chip page 3 to 0E crypto and did not give new file to save and write back to MCU. If you can confirm that pcf7936 written succesfully and give you file to save ?

I can see VVDI2 show key no.1 ID can you get all key information so I can retrieve key no.1 and write data on emulated chip? or please write new key on emulated chip so you can give me new file and transponder contents of 2nd key I will be able to intput data to my chip with your help.

The problem is that I can't program key by OBD because something wrong with car installation (car ~~~ed from auction) and steering lock can't release ( new steering lock doesn't work as well) I was hopping probram the key directly to eeprom using Orange5 and Tango but this not work either.

[szkeptmen]

I'm looking for color codes of Orange5...
Anyone have it ?

[redliner]

I'm looking for color codes of Orange5...
Anyone have it ?


do you mean adapter A25 incircuit wires? 814141
I personally don't use colour codes wirh orange5 because wires are loose and the colours can be different or misleading depending on schematic but I make a little aid connection from my r270 programmer comparing to orange5 as some connection has different name.
Use the names instead of colours and you don't make a mistake.

#1 +5v (VDDR, VCC) BLUE
#7 RST (RESET) BLACK
#19 BKGD/RXD/BDM GREY
#26 GND (VSSR) BROWN
Those four wires I was using to read MCU recently. Don't know how other people but this work for me.

[szkeptmen]

I'm like to know this wires / functions
Photo attached / from author...

Derbi Senda bike / dash
inside HC908LJ12

THX + REP

[autoTkey]

Yes I know that, Tango same recognized but did not write new key only change chip page 3 to 0E crypto and did not give new file to save and write back to MCU. If you can confirm that pcf7936 written succesfully and give you file to save ?

I can see VVDI2 show key no.1 ID can you get all key information so I can retrieve key no.1 and write data on emulated chip? or please write new key on emulated chip so you can give me new file and transponder contents of 2nd key I will be able to intput data to my chip with your help.

The problem is that I can't program key by OBD because something wrong with car installation (car ~~~ed from auction) and steering lock can't release ( new steering lock doesn't work as well) I was hopping probram the key directly to eeprom using Orange5 and Tango but this not work either.

How about now?
814258

[redliner]

I'm like to know this wires / functions
Photo attached / from author...

Derbi Senda bike / dash
inside HC908LJ12

THX + REP

Sorry my orange version doesn't have this mcu and schematic to see it. I made myself orange5 wire colour code bassed on all schematic pictures I have but did not trace blue or grey colour.

BLACK - GND
YELLOW - RXD
ORANGE - TXD
GREEN - RST
- OSC
WHITE - AS/PDX
PURPLE - V10V/VPPR
RED - VCC
- VLim
-GND

[TobyG]

Has anyone had success reading or writing to a MC68HC705B16 CFN ? Mask code is 0D28J

I have no problems at all reading MC68HC05B6, B8 or B16, all with different mask codes, but cannot read or write to the 705B16,
it always says "MCU not answer".

I checked the connections, even re-soldered them, and tried several chips (all new, original), but cannot get it to work.
Any suggestions? I may also consider other programmers, if you got anything in mind that reliably works with the 68HC05/68HC705 MCUs

https://i.imgur.com/1ipBEgo.jpg

https://i.imgur.com/Fuxv4Pz.jpg?3

[Wosanyn13]

I think original xprog is safer for those

[mexanico1971]

Hi
got this version 1.36 and want to read R7F7010193 SRS Kia
But wend I choose the MCU the software give me this error !
Is safe to do this width clone ?
Somebody have done it ?
is on MT or SE mode ? or must use adapter ?

thank"s in advance
https://uploads.tapatalk-cdn.com/20210908/6b929539e251bba7bc50100b51985de7.jpghttps://uploads.tapatalk-cdn.com/20210908/52f4b14b0f45027b20bdbf33597f42ba.jpg

[luci01]

Hello

I need the V850ES file for orange5 plus clone.I have this errors. Missing the file or ?????

[mhedz]

right got this in today
very easy to install
all functions open 1 - 10 exept car radio get error
tested reading usual eproms all good
tested tms370 with adaptor board did not read so maybe bad adaptor board

tested immo login code from dump ,tms vw works

will test as i go

if anyone want to send a file to test feel free


hi mate can you check this MCU if supported to that orange5 clone
renesas R5F10WMCA

[Stelaras26]

No clone does not support this one brother

[mhedz]

so which programmer should i buy that can support that Renesas mcu.

[mhedz]

here in philippines its hard to find a original orange and upa
there is no seller here,. thats why we are using a clone instead
of nothing.

[teerak2uk]

here in philippines its hard to find a original orange and upa
there is no seller here,. thats why we are using a clone instead
of nothing.Order from outside PH then you'll find original

[mhedz]

give me a link for active programmer site brother

[miroopel]

give me a link for active programmer site brother

........................
http://www.scorpio-lk.com/eng/distributors_eng.html

[carradio2001]

Can somebody repair a killed orange-5 programmer ?

Carradio2001.

[mrkyboy]

Hello mates I need help with Orange 5 1.38
When I start program I have error
I think to have problem with licence.I bought device without dongle.I contakt seller and he told me to dongle not nesesery for doing programmer and software.Can somebody help to solve this problem

[boxsport]

Hi
got this version 1.36 and want to read R7F7010193 SRS Kia
But wend I choose the MCU the software give me this error !
Is safe to do this width clone ?
Somebody have done it ?
is on MT or SE mode ? or must use adapter ?

thank"s in advance
https://uploads.tapatalk-cdn.com/20210908/6b929539e251bba7bc50100b51985de7.jpghttps://uploads.tapatalk-cdn.com/20210908/52f4b14b0f45027b20bdbf33597f42ba.jpg

Hello there. You have a file missing. Send me PM. I'm not sure, but I might have that file .
PS: sou tuga também.
Cheers

[Makiszabi]

Hello, could someone help me with a script for ORANGE5 because I'm having trouble with Tr_280.hpx? Thank you in advance for your assistance.