PDA

View Full Version : Lexus IS250 2014 All keys lost



luis12
2nd June, 2016, 10:47 PM
Hello friends, I need to add a key or reset Smart Key and ID box modules. Or any body clear a dude on the proccedure. A have a virgin remote Tiris TMS37200. Need to virginize modules?. Thanks in advance.

aketokediag
3rd June, 2016, 04:51 AM
Hello M8,
Please check your Smart key dump very well you should have S93C86 have already virginilized your ECU ID CODE for you.
Regards

luis12
3rd June, 2016, 03:37 PM
I will send you pic of Smart ECU photo, thanks friend.

luis12
3rd June, 2016, 04:32 PM
Hello M8,
Please check your Smart key dump very well you should have S93C86 have already virginilized your ECU ID CODE for you.
Regards

This Smart Ecu is with 93C66 mssop

aketokediag
3rd June, 2016, 11:19 PM
Will prepare you a virgin file tomorrow

aketokediag
5th June, 2016, 02:15 PM
Hello M8,
Write this dump and report... both are virgin PASS in PM
Regards

luis12
8th June, 2016, 04:33 PM
Dumps writed, now TIS says need to turn swich ign on with registered key for register new key, I dont know why if modules are virgin it says registered key and how to turn on ign, thanks friends.

aketokediag
8th June, 2016, 07:30 PM
Hold on friend let me check the dump on your smart key, will get back to you soon

aketokediag
9th June, 2016, 05:29 AM
Hello M8,
Write this dump to your smart key, same pass as before.
Regards

luis12
13th June, 2016, 07:10 PM
Friend its not posible to write 2K in a 96C66A eprom, I think your assuming is a 93C86.

siwyauto
22nd June, 2016, 09:33 AM
hi,

did you solve the problem with reset dump in smart module?

b.r

luis12
4th July, 2016, 10:51 PM
No friend still have issue, still two keys registered, Dash turns on but no unlocks Steering lock.

aketokediag
5th July, 2016, 07:31 AM
Hello M8,
Try and follow this steps to start the engine perform syncronize between the ECU and IMMO open driver's door, turn ignition ON short terminals Tc (PIN13) CG(PIN5)in the DLC/OBDII connector leave it for 45minutes the car should start.
Regards

usman4
5th July, 2016, 01:46 PM
u need to sync steering lock with id code, use x100, skp900 or TIS for this or post steering lock dump 93lc46 i will virginize it :)

luis12
5th July, 2016, 02:02 PM
Thanks friend let me try...

sogaro
5th July, 2016, 10:15 PM
To synch steering lock, go to the menu in TEchstream and you will see it there. Its called a handshake, usually the second info on the left when you open Utility tab on Smart ecu tab

luis12
15th August, 2016, 11:58 PM
Friend finally and after try with lots of dumps and expensive tools like...Orig AVDI, orig Tcode, org MVP pro, and others scanners solved with and old cracked Techstream versi?n, Tango Techstream calculator and cheap Xhorse Mini VCI interface ($27)... job done in 20 minutes, incredible but true still cant believe. A 2015 car Lexus all keys lost... everyday learning.

ucokseparoh
16th August, 2016, 03:55 AM
....solved with and old cracked Techstream versi?n, Tango Techstream calculator and cheap Xhorse Mini VCI interface ($27)... job done in 20 minutes, incredible but true still cant believe. A 2015 car Lexus all keys lost... everyday learning.

Congratulation.

was it done with the original files or with files after reset?

luis12
19th August, 2016, 04:31 PM
Congratulation.

was it done with the original files or with files after reset?

Must be reseted with original files because Techstream process not only Smart also Steering lock and ID box, also calculation is individual to VIN.

waail
17th October, 2017, 09:31 AM
Hello M8,
Write this dump to your smart key, same pass as before.
Regards

Hi
I can get the password for LEXUS SMARTBOX VIRGIN
I have the same smart box 89990-53013
thank you

waail
17th October, 2017, 09:33 AM
Hi
I can get the password for LEXUS SMARTBOX VIRGIN
I have the same smart box 89990-53013
thank you