ford fiesta 2003

[triak88]

Hi,
Can somebody confirm that this files from ECU are coroupted.I want to make transponder with Effi ,but say that the file is damage.Can somebody help my with iMMO off or file data for transponder.The file and model are in the atthachment.

[triak88]

hi,
can some one check file please ,EFFI not recognized .What is the best way that car will start.I have tried with SKP900 and SBB to program the transponder but without sucess.Please help, this car stay in my garege 1 month.

[autoTkey]

What's the eeprom? Why are there so many files in the archive - most of them are the same, only two version I see - swapped and non-swapped? Non of them seems to be recognized by TMPro2 either which is a bad sign. Did you read the correct EEPROM? Try reading with different programmer - if you used UPA try with Xprog and vice versa.

[triak88]

thanks man, yes I read with xprog_m.The eeprom is 93c56 in ECU.I read by EEFI manual which is for fiesta in option (transponder production). this is picture where is location of EEprom.380725I dont now if this fiesta have IMMO in cluster but i did by EEFI manual.

[autoTkey]

I assume the car has no keys at all. 93c56 should be read as x16.
So I can't give full solution to this but it looks like the dump is not OK. There are a lot of threads here when you search on fiesta 93c56 where you can compare your dump and see it looks different from the bunch. Seems IMMO off is not possible - only virginize. But when the eeprom is not good maybe you will need to replace with second hand ECU>virginize/synchronize>program keys. I suggest you to wait for someone else with more XP on such fiestas to confirm this. Maybe you can find a correct dump to fix yours - take a look at the other threads.

[rokibar]

Hi,
Can somebody confirm that this files from ECU are coroupted.I want to make transponder with Effi ,but say that the file is damage.Can somebody help my with iMMO off or file data for transponder.The file and model are in the atthachment.
left file 16r in ecu. use transponder 4d63 and write this:
page1 03
page2 00
page3 B1E913 01
page4 in pm

[Weasel3]

Dumps opens fine.
4D ID63
2 keys recognized.


I tried all the dumps, and all open OK.

[triak88]

thanks rokibar and autotkey.yes the car lost all key.I will try solution of rokibar on monday and then I will inform you.Thanks again both of you.Have a nice weekend.

[triak88]

weasel which tool you have to read dumps ok.I have open with EEFI but not recognized saw why I cant make transponder.

[lion0304]

Your Fiesta 2003 4D63 very easy if you use T300 by OBD. 5mn job done. You can use 4D63 from other car.

[Weasel3]

I read out the info with a green dance tool.

Did you try SSB - Ford SUD-America

FIESTA(CAN) 03-
and also
F-100 00-05
?
Just a wild shot.

[triak88]

yes i tried fiesta CAN 03 .but SBB counting then after 800s show commucation error.
I didt try f-100.
Monday I will try rokibar solution and inform .

[autoTkey]

I read out the info with a green dance tool.
...

You mean that one? :chuncky:
http://big.assets.huffingtonpost.com/Diva-Dance-Party570.gif

[philipcros1]

fiesta 2002 4c, fiesta 2003 4d, id 63 mvp clone non problem, sbb sbb weak to fordweak to ford

[philipcros1]

may be removed old tms

[Weasel3]

You mean that one? :chuncky:
http://big.assets.huffingtonpost.com/Diva-Dance-Party570.gif

No I used this one.:)

Dance tool
http://www.game2learn.com/?page_id=108

[philipcros1]

almost Depeche Mode

[autobo]

hi,
can some one check file please ,EFFI not recognized .What is the best way that car will start.I have tried with SKP900 and SBB to program the transponder but without sucess.Please help, this car stay in my garege 1 month.

the best way to start car is VCM IDS.

[triak88]

hi, im sory i didnt answer i said i would answer on monday morning. i tired what robikar said but because i have the chinese version of zedbull it doesnt support manual writting pages.
How can i fix this problem. I have an idea is it possible to generate data with the help of the function TRANSPONDER PRODUCTION (ZEDBULL) and can i insert the data on the DUMB, that i have wrote on the form. Thank you for putting all the hardwork on my problem an i wish to fix the problem for all of us and that we can learn something.

[autoTkey]

Zedbull has the same functions no matter if it's english or chinese language version.
Just start the Zedbull/EFFI software on the computer and use it to write the data in the transponder.

381146

[triak88]

thanks ,but i have error meassage when do this.381168381169381170

[rokibar]

go at some locksith who can write tham if have not proper tools.

[paul_12345]

thanks ,but i have error meassage when do this.

but what type of chip are you trying to write to?

[triak88]

For all my forum friends i would like to add that even if my chinese version of zedbull said that it was an error i went out to the car and tried it and the car started even if the version sad it was an error.
I would like to thank rokibar who edited the DUMP

[autoTkey]

Nice, good work :)