Need pinout for MB EDC15C0 (CR1.1)

[soxten]

I have a MB E-class 1999 2.2CDI as I cant connect to over OBD in car....
Need pinout to test on bench.

A0225458032
0281001817


385088
385089

[soxten]

Plz need help :)
Have search all day but cant find pinout for this typ of ecu

[mercis]

https://wiki.obdtuning.de/images/d/dc/MB_EDC15C5.jpg

[soxten]

Mercis, is this same for EDC15C0?

[soxten]

I have connected like edc15c5 and all looks ok.
But dont have any connection over OBD...
K-line is on T3 and pin 28 on pinout
Is this correct?

My problem is that I dont have connection to ECU in car over obd....
So I need to know that this pinout is working on edc15c0

[mercis]

28 k-line
15 15c6-same pin
grund ,30,15 and k-line

[soxten]

Here is pinout from Autodata
X1 is obd connector

Pin28 and 40?

And is obd connector the old model? Or new obd standard connector?

[mercis]

this ecu is on w202,210,38 pin diagnose
wich tool you want use diag ecu?

[soxten]

I use Autel Maxidas

[soxten]

I did connect k-line to pin 38 in T3 but no connection by obd (pin 7 on normal OBD conector in car)

[hcwc]

You can't read/write this ecu by obd, it's old type of microprocessor

Open, desolder flash and read/write ;) 15 min work

[soxten]

I need to test if I can connect ecu to obd, is it alive?
In car I dont grt connection and I think ecu is dead.

[soxten]

Should pin 38 =diagnostic from ecu go like normal k-line to obd connector 16pin?

[soxten]

Please need help
Should T3 and pin 28 go to big OBD connector pin 38? for connection on bench?

[mercis]

on 38 connector 4-ecu

[soxten]

Ok is k-line on 38 on ecu?

[Romcik]

It is possible test this ecu on bench?

[Romcik]

Hello.Can't read/write this ecu by obd?

[turbocip]

Hi, i dont open new thread.
i have EDc15C0 MB v220 1999
car start / no problem.
i dont have connection with ecu via 38 pin connector. With all others module diagnose are ok.
i test in bench mode - as the same pinout edc15C6 / not reaponding
please someone have done in bench mode.
im interesting about pinout to read errors / car not have power
ecu is :
A023 545 39 32 (tel:545 39 32)
EDG016 CR1.7 2.2L 4ZYL M05
0281001984 (tel:0281001984)
HW:33.98
SW: 42.98
automatic transmision
thank you to all in advance

[mexanico1971]

And what is the final of the story ?!

best regards

[turbocip]

Not end of story yet.
wait car for test again on bench.
regards

[troculo]

Hola, el boot pin de ESTA edc 15c0 de vito w638 ,es el mismo? Gracias