OBDSTAR X 100 pro IMMO & Remote Feedback

[Yuki Shi]

PSA pin reading was disappeared in the latest update on X300 DP.

Hello, I've heard that the software will be updated again soon

[jodge]

Fiat Freemont 2013
Pin code read done with 2 sec under Fiat menu
Key learning done under Fia--> Asia--> Freemont
BEFORE start the key learning process you must take far away the working key from the car!

[labusas]

Ford F series and E series USA version - NO COMMS
Any idea, does ford china only works?

[eliaselias]

mazda cx9 2008 transponder key programing failed

[kamel2003]

Please search pinout cable x300PRO3

[harberg]

Hi,

I need tool for Honda key programming. Is X100 pro any good for Honda?

[dimitar]

Jeep laredo 3.0 diesel 2007

Pin read failed

Dash calibration ok

[Yuki Shi]

Hi,

I need tool for Honda key programming. Is X100 pro any good for Honda?

Hello, what's the detail information of your car?

[u.s]

Renault Grand Modus, read PIN code failed

[Yuki Shi]

Renault Grand Modus, read PIN code failed

Did you update to the latest version? and which year your car produced?

[Danielsach]

Adding keys for audi a6 and q7 still dont working with x100pro and rfid adapter.
When chose read eeprom message: security veerification failed.
Do anybody tested RFID adapter?

[Yuki Shi]

Adding keys for audi a6 and q7 still dont working with x100pro and rfid adapter.
When chose read eeprom message: security veerification failed.
Do anybody tested RFID adapter?

Hello, would you pls send your log file?

[Danielsach]

This are my logs.

[ttzag]

Yuki shi
I have x300 pro3 ..what kinds of vag cars can I program keys without RFID adapter ?

Sent from my SM-A520F using Tapatalk

[lock66]

land rover freelander 2 2007
Smart key programming-ok

[Yuki Shi]

[QUOTE=ttzag;3137265]Yuki shi
I have x300 pro3 ..what kinds of vag cars can I program keys without RFID adapter ?

Hello, maybe you need to know which car needs RFID adapter :peaceful:

Pls visit their website-->Products-->Key Programmer-->RFID adapter

[Yuki Shi]

This are my logs.

ok, I will try hard here:itsme:

[rtbdiagnostic]

Can the ID48 Megamos Crypto Transponder Chip for VW polo etc. be programmed with X-100 pro

[rtbdiagnostic]

Can the ID48 Megamos Crypto Transponder Chip for VW polo etc. be programmed with X-100 pro

[Yuki Shi]

Can the ID48 Megamos Crypto Transponder Chip for VW polo etc. be programmed with X-100 pro

Hello, which year did your car produced?

[rtbdiagnostic]

2013 in South Africa but from 2005 onwards in other countries ...:jiggin:

[JammerOne]

Hello there ,

I tried today Ford Fiesta 2013 " All Lost keys " but it says " Security Verification Failed "

anyone try this ?

thanks

[looly]

2012 Meriva B successfully programmed key using Insignia type 1. Took approx 15 mins. I already had pin code.

[HeXeN]

Hello there ,

I tried today Ford Fiesta 2013 " All Lost keys " but it says " Security Verification Failed "

anyone try this ?

thanks

you havent tried via china. if you did you would program it.

[labusas]

Hi, what is the connection for coil/key reader on the pad2 tablet side? is it mini HDMI to micro usb cable? I'm missing a cable

[wojciech300]

New cx5 (kf) from 2017 don't work :(

[JammerOne]

you havent tried via china. if you did you would program it.

I tried it but Failed .. I try 2013 with " All Lost Keys but " Security Verification Failed "

Thanks

[just4upal]

I tried it but Failed .. I try 2013 with " All Lost Keys but " Security Verification Failed "

Thanks
Dont use lost key go china and add key i did 2014 feista like that all lost key

[autoTkey]

For all-key-lost you would need two keys as well.
It doesn't matter if you have key or not - you just have to add one key - don't erase the old keys or trouble...
Ford is easy unless you delete his keys. Then he get's angry!

[alpatov]

renault megane 2008 add new card - ok

[Mr BLACK]

audi a4 rb8 dash with 12 bites CS data try to read pin code Fail ..car not starting after Lo 1-2 on dash ... solved with avdi

[Mr BLACK]

fiat Linea 2008 Fail to add precoded Id48

[Master01]

Yuki Shi (http://www.digital-kaos.co.uk/forums/member.php/514293-Yuki-Shi)
đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[rtbdiagnostic]

2012 hyundai ix35 add a spare key is it possible to code transponder and program remote key with x-100 pro

[lalaina74]

2012 hyundai ix35 add a spare key is it possible to code transponder and program remote key with x-100 proYes , I have done few

Envoyé de mon MI PAD 3 en utilisant Tapatalk

[lalaina74]

Yuki Shi (http://www.digital-kaos.co.uk/forums/member.php/514293-Yuki-Shi)
I have one question.
What is the different "All Key Lost" and "Program Key" menu?
I want to learn a spare key - Peugeot 508 2014 car.
But i see only "All Key Lost" menu.
Why???
Other Peugeot model have simple "Program Key" menu...With peugeot, can't add key. Must register old and new

Envoyé de mon MI PAD 3 en utilisant Tapatalk

[rtbdiagnostic]

Yes , I have done few

Envoyé de mon MI PAD 3 en utilisant Tapatalk

Can i use the remote part of the key from another vehicle and program it to work lock - unlock - open boot for another vehicle and alo can the transponder be reprogrammed or surely you must replace the id46 chip

[lalaina74]

Can i use the remote part of the key from another vehicle and program it to work lock - unlock - open boot for another vehicle and alo can the transponder be reprogrammed or surely you must replace the id46 chipYes because the immobilizer ( id46) and the remote control is completely separated

Envoyé de mon MI PAD 3 en utilisant Tapatalk

[Dean4060]

Hi,

I need tool for Honda key programming. Is X100 pro any good for Honda?

Yes it is very good for Honda key programming from 2001 onwards it worked on every model i have tried so far, done 2013 civic spare remote key today

[norman1967]

Has anybody else noticed ford has stopped working?

Tried to do a 2012 mondeo today key model. Done a few in the past with obdstar 100 pro and my f100 both failed no comms. Last week 2011 focus key model same failed. Done them with these tools also. It's like they have taken away the ability. I bought early when the tool was released with 3 years of updates. Don't think I be updating any more they keep stealing the functions back..

[eliaselias]

toyota rav4 2015 program key ok...need 60 second ....transponder H

[jodge]

Hyundai Trajet 2002
Key info ok
Key delete ok
Key learn ok
Pin code read failed
Pin code calculation from VIN ok

[jodge]

Has anybody else noticed ford has stopped working?

Tried to do a 2012 mondeo today key model. Done a few in the past with obdstar 100 pro and my f100 both failed no comms. Last week 2011 focus key model same failed. Done them with these tools also. It's like they have taken away the ability. I bought early when the tool was released with 3 years of updates. Don't think I be updating any more they keep stealing the functions back..

i guess they trying to separte the 300dp and the x100pro. Same situation in the mileage part :(

[norman1967]

i guess they trying to separte the 300dp and the x100pro. Same situation in the mileage part :(

Really... so there taking away functions or just no longer adding?
One thing for sure I won't be updating my tools. And I won't be buying anymore from them that's for sure

[agibalov]

Hi,who had such this problem?488402
who had such a problemwho had such a problemwho had such a problem

[jodge]

This list based on users feedback in this thread.

Due the continuous update some models exist in both working and non-working list.

Important!!
As you see in the list many modells done under another car. Be careful if you don't familiar with the brand/cars relations

[siyadk]

Good Job Jodge!!!

[jodge]

Opel Astra H 2005
Factory made flip key 2 button
Read pin ok
Key learning ok (TP and remote are both working)

[alawei]

hello all
i buy from amazon x100 pro but i suprisied no imo key function ,just odo meter adjustment and obd .can i add key programming function pleas

[AndyCZ]

hello all
i buy from amazon x100 pro but i suprisied no imo key function ,just odo meter adjustment and obd .can i add key programming function pleas

I think you should check description what you bought either contact your supplier to help you with your device.

[metalik]

Audi A4B8 2008 precode and program key all ok, program wersion 33.19

[ucokseparoh]

Has anybody else noticed ford has stopped working?

Tried to do a 2012 mondeo today key model. Done a few in the past with obdstar 100 pro and my f100 both failed no comms. Last week 2011 focus key model same failed. Done them with these tools also. It's like they have taken away the ability. I bought early when the tool was released with 3 years of updates. Don't think I be updating any more they keep stealing the functions back..


thanks for the report Norman.

that is bad news... we have many Ranger here :(

[labusas]

Hi, metalik
How did you proceed to do this in the audi menu exactly? Which option did you go with to precode?


Audi A4B8 2008 precode and program key all ok, program wersion 33.19

[metalik]

Read immobilizer data and make a dealer key.

Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka

[sadarmeng]

very unlucky, X100pro obdstar is not able to add a key to the Nissan Navara 2012, BCM Code recognizable, pin well-grafted, unfortunately programed key comunication breakdown

[truedetective]

Tried to do a 2014 Transit Custom - communicated fine gave an outcode to enter into obdstar.com however theres nowhere to enter it.

[norman1967]

Tried to do a 2014 Transit Custom - communicated fine gave an outcode to enter into obdstar.com however theres nowhere to enter it.

Really? It wanted you to go online to retrieve the in code? This tool is going backwards when it comes to ford

[HeXeN]

He means on old website there was possible to use some calcs. But on new website it disappear.

[dorofteius]

Opel Zafira 2000. Siemens immobox. Pin code from tms. Precoded ID40 Pcf7935.
Key programming failed. It says success, but immo blinking and invalid key.
Done with launch Idiag, no problem.

[jodge]

Ford Transit 2012 EU modell
Factory made blue 3 button remote, no need any code

Ford-->Europe-->Transit-->Diesel-->2007-2014-->Program Key = Wrong pin, exit
Ford-->Asia-->China-->Immobilser-->Transit-->Program key = Success

Both remote and tp working

[dimitar]

The only thing that x100pro can do are jobs that 20$ tools can do the same thing
I guess its worst than fvdi 2014 but triple the price
And the updates!!!......you better dont update
Every update ads some bugs and removes some models

[dimitar]

Fvdi 100$
Carprog 40$
KKL cable 5$
Opcom 15$
PSA Lexia 40$
...........etc...etc.....
X100pro 319$ + shipping + tax
X100pro will never match the functions of the above mentioned tools EVER

Worst spent money ever...

[maybach_]

C4 Picasso 2008 all key lost work
You need pin for the car

[Faraday]

Fvdi 100$
Carprog 40$
KKL cable 5$
Opcom 15$
PSA Lexia 40$
...........etc...etc.....
X100pro 319$ + shipping + tax
X100pro will never match the functions of the above mentioned tools EVER

Worst spent money ever...

Try to do 2012 Ford proximity key with those cloned tools

Like every tool have prons and cons.

[dimitar]

Try to do 2012 Ford proximity key with those cloned tools

Like every tool have prons and cons.

Elm327 + forscan working 100%

[Yuki Shi]

Fvdi 100$
Carprog 40$
KKL cable 5$
Opcom 15$
PSA Lexia 40$
...........etc...etc.....
X100pro 319$ + shipping + tax
X100pro will never match the functions of the above mentioned tools EVER

Worst spent money ever...

one device can not do every models

[dimitar]

one device can not do every models

Yea but at least one device SHOULD do what the company that sells it claims can do

[autoTkey]

Even top tool like AVDI doesn't do what it claims. What do you expect from X100?

[Faraday]

Elm327 + forscan working 100%

You say that forscan bypass FDRS?

[HeXeN]

Have you done 100% ford proximity with forscan?
Elm+what to do mazda proximity? :)

[jodge]

Have you done 100% ford proximity with forscan?
Elm+what to do mazda proximity? :)

Proximity? Are you kidding? :D The forscan unable to program a simple 8C spare key to BT50

[Nymike]

2012 Honda Civic US add key ok

Sent from my SM-G950U using Tapatalk

[elmelor]

opel astra j 2012, all the lost keys ok (I need pin), key produced with kd900, ok

[maybach_]

Opel Mokka 2015 all key lost via Insignia meny 15 min, no need program remote separately :encouragement:
Need pin for this jobb

[elmelor]

1) Programming chevrolet spark lt 2015 (id48) ok, spark europe ok
2) Program chevrolet spark GT lt 2016 (8e) pre-code spark 8e for tango, programming ok, order 2 keys cycled.
3) Program chevrolet traker 2016 (Procedure similar to chevrolet cruze)
4) add key and remote control programming subaru outback 2015 (you need a programmed key) (the machine flashes when adding a key, it's a bit scary) note: control programming was done by subaru europe

others:
(mg china car) models 3, 5, 350 and gt, all can be programmed, they only need a pin (tp12 white)
(donfeng china car) model s30 ok, need pin (tp12 white)
(Greatwall china car) wingle 5 ok, need pin, id48

To improve:
I agree with some previous posts, I have not been able to program Ford for a while.
I have finished working with skp900 or another team, something is wrong

In my workshop we have done many programming, I do not remember them all, I will increase the list as I remember them, greetings, I hope you will be of help.

[HeXeN]

I agree with some previous posts, I have not been able to program Ford for a while.


Have you tried with older SW version from your SD card?

[elmelor]

Have you tried with older SW version from your SD card?


I'm going to do tests when Ford enters the workshop for lost key, there I will try different versions, to see if there is a real problem or just bad luck.

[elmelor]

Volkswagen gol 2011 Brazil (trend) immo 3.5 (need pin) --> program ok

- You can get pin from the ecu and Eeprom 95040 or read with fvdi

[honingkoning]

Megane 2005 keylearning Very fast.

Read pin first it gives 4 pincodes you have to enter it manually.

https://uploads.tapatalk-cdn.com/20171229/1f88ec350f155328fec771dcd797be92.jpg

All ok, keyfob is also learned.

Wbr Adam.

[honingkoning]

Peugeot 206 2006 keylearning ok.
Pin needed ofcourse

[elmelor]

chevrolet prisma 2017 - (need pin, read bcm 24c32) porgram ok sistem 3

[lock66]

Ford Mondeo 2008.I can not program the key.Help is needed.Who did this car?Thanks.

[Alexander74]

Hi.
Honda Accord USA 2017 add key (47chip)-ok

[metalik]

Ford Mondeo 2008.I can not program the key.Help is needed.Who did this car?Thanks.Try on another soft wersion, or try by China car list. Its all key lost?

Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka

[HeXeN]

mazda CX-3 2012 add key asks for incode. how to calculate?
to make key is only option to erase all keys then add 2pcs? anybody fail with it?

[wojciech300]

mazda CX-3 2012 add key asks for incode. how to calculate?
to make key is only option to erase all keys then add 2pcs? anybody fail with it?
CX3 from 2012 ? Something is wrong.... Check year or model.

[HeXeN]

maybe it was cx-5

[Nymike]

2011 toyota corolla US add key not ok.
Tried every option under Toyota and fails to communicate and suddenly when I choose G option only Europe is available. It used to work a year ago with those cars

Sent from my SM-G950U using Tapatalk

[norman1967]

2011 toyota corolla US add key not ok.
Tried every option under Toyota and fails to communicate and suddenly when I choose G option only Europe is available. It used to work a year ago with those cars

Sent from my SM-G950U using Tapatalk

This is exactly the reason why I will not update any more and not would I ever buy another obdstar product. Which is a shame as I thought x100 was a superb tool as Is my f100. However I noticed functions that used to work great not working at all after updates and I thought to myself hmmm Is This a ploy to get you to buy then next product as they do seen to enjoy rolling them out

[Weasel3]

This is exactly the reason why I will not update any more and not would I ever buy another obdstar product. Which is a shame as I thought x100 was a superb tool as Is my f100. However I noticed functions that used to work great not working at all after updates and I thought to myself hmmm Is This a ploy to get you to buy then next product as they do seen to enjoy rolling them out

My opinion around this, is that the developers do some mistakes working on menus and implementing the software. I guess it is bugs. Which will be sorted out at a later stage, when they get aware of them.
I don't think they will ruin their reputation, doing such nonsense things with purpose.

[jodge]

My opinion around this, is that the developers do some mistakes working on menus and implementing the software. I guess it is bugs. Which will be sorted out at a later stage, when they get aware of them.
I don't think they will ruin their reputation, doing such nonsense things with purpose.

I think we all hope this "bug theory" the last ~5-10 update both dash and the immo part is a mess. Incuding the function separating stuff :(
I like my x100pro but there is a big BUT...

[datapage]

Remember, until iphone has clock bomb in software.
It gets weak and you buy the new one again.

[dorofteius]

Renew key by Vvdi prog , and programmed with x100 on Insignia 2010 .
All good.

[ucokseparoh]

This is exactly the reason why I will not update any more and not would I ever buy another obdstar product. Which is a shame as I thought x100 was a superb tool as Is my f100. However I noticed functions that used to work great not working at all after updates and I thought to myself hmmm Is This a ploy to get you to buy then next product as they do seen to enjoy rolling them out

I have the same thought. Sometimes ago before i did an update i did notice that my x100pro can do Suzuki 8 digit PIN calculation.. i tested it by myself by comparing the x100pro output with old threads bout this subject from Tango forum and here, and it's proven that x100pro can do it. But after i did an update this function is no longer works..

[elmelor]

Audi TT 2008- programming with RFID (24c32 + micronas) (all lost keys)

[TukoSalamanca]

Audi TT 2008- programming with RFID (24c32 + micronas) (all lost keys)

Bench or by obd?

[elmelor]

Bench or by obd?

by obd2 + rfid adapter

[zckariya70]

Cannot update Obdstar tools till march, due to obdstar updating their server.....................https://www.autotechzone.com/styles/default/xenforo/clear.png

[Nymike]

2005 Chrysler 300 US version. Add keys fails (security access failed) . Had the same pin by fvdi and from the dealer.

Sent from my SM-G950U using Tapatalk

[rob h]

Slow speed, that would mean, slow!
I read this too.
I assumed minutes, maybe even hours, not months.


Anyway, i format first, ask questions later. So i used a recovery tool, to revive my empty micro sd.



Hope they fix this soon.


Cannot update Obdstar tools till march, due to obdstar updating their server.....................https://www.autotechzone.com/styles/default/xenforo/clear.png

[dimitar]

Focus 2014
Tiris dst+ reused from a mondeo
Programing ok

[autocheck]

Failing to update my x100 pro latest version, anyone with information

Sent from my X5mini using Tapatalk

[PremierD]

Read the post about four above this .. you plank

[Weasel3]

Something big it on its way, for both.
The 300 get something really extra.

[hcip]

Something big it on its way, for both.
The 300 get something really extra.

Now Updating is working, I updated my Pad a minute ago

[Weasel3]

Now Updating is working, I updated my Pad a minute ago
Open BMW on pad, and tell me what is new? Any extra :)

[hcip]

Here is the screenshot for mileage and immo

[datapage]

Land Rover 30.18 not work in land rover sport 2005, 30.15 CHINA ok.

[ucokseparoh]

Something big it on its way, for both.
The 300 get something really extra.


For both means for x100pro too? Man, i really love it more if that's true. Wouldn't mind paying reasonable price for some significant updates.

[mariuszDK]

Hi M8s
About Obdstar 's update , they had server under construction to the end of Ch S Festival and now everything is/should be ok.

[Weasel3]

For both means for x100pro too? Man, i really love it more if that's true. Wouldn't mind paying reasonable price for some significant updates.

The BMW is only for the PAD. There is a video for it.
But the 100 got PSA upgrades, some Renault and also Porsche (but I think you need the pin from a different source).

[rob h]

These old psa F108 can Read pin, without working key present.
New H108 can do alle Keys lost.
It reads the pin from the bsi.

The 100, does it do the same, as the h108?

[metalik]

I program key for Ford S-Max 2012 by China car list. In eu car dont work.

Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka

[Viliuxxx]

Hello,

Maybe testing X100Pro to car VAG (Audi/VW/Skoda/Seat) generation 4 and 5 via RFID Immo adapter?
Does ir really work wen all keys ar lost ???

[AndyCZ]

Can X100pro program Landrover Freelander 2 key?

[eliaselias]

mazda cx5 program smart key failed.....
error code : send the above code to the manufacturer and get password

[lalaina74]

mazda cx5 program smart key failed.....
error code : send the above code to the manufacturer and get passwordNeed incode with x100
With X300dp no need code
I have both

Envoyé de mon MI PAD 3 en utilisant Tapatalk

[eliaselias]

Need incode with x100
With X300dp no need code
I have both

Envoyé de mon MI PAD 3 en utilisant Tapatalk
can you add only 1 smart key with mazda cx5>>??? because i heard that you have to add 2 smart key

[lalaina74]

can you add only 1 smart key with mazda cx5>>??? because i heard that you have to add 2 smart keyI have added one key,
The customer had only one key and want a spare.





Envoyé de mon MI PAD 3 en utilisant Tapatalk

[jodge]

This list based on user exprerince.

Some advice:
- Never delete the old sw versions, mostly older is better
- if not working try under the chinese menu (like almost all ford)
- the update policy is a total mess
- it seems the x100pro is a discounted product

[HeXeN]

mazda cx5 program smart key failed.....
error code : send the above code to the manufacturer and get password

have you tried to erase all keys then add all again?
with x100pro safe operation?

[eliaselias]

have you tried to erase all keys then add all again?
with x100pro safe operation?

no i did not tried... because if something went wrong it will be a bug headache

[lalaina74]

no i did not tried... because if something went wrong it will be a bug headacheI have do it but with x300dp
Don't try with x100,
All is good

Envoyé de mon MI PAD 3 en utilisant Tapatalk

[hivrich]

Citroen C4 2007.
When adding a key, will the remote control be learning?
Thanks.

[HeXeN]

If you bought proper remote then YES.

[hivrich]

Ssang Yong Rexton 2011 add key + remote - OK

[gieteknysa]

Dodge Ram 1500 2014, add keyfob (fobik) not ok - key locked

[Yuki Shi]

what did the device show on screen when failed?

[HeXeN]

C-MAX 2014 add smartkey 80bit - OK
I think I went via Focus... v31.08 > China Ford > 2012-

New updates are sh*t. v32.04 No communication.
Do not update your tool until you backup old soft from SD card.

[serviclau]

It's possible add key Renault megane 2007, smart card 4 buttons with x300 full?

Thanks.

[SMP7]

Yes, one of my friend tried this :star:

[SMP7]

Hello, which device?

[Buddy41]

X100 plus.
Can it do Mitsubishi colt 2008.
Thanks.

[SMP7]

X100 plus.
Can it do Mitsubishi colt 2008.
Thanks.

You can enter the device list to check:peaceful:

[sumi1]

Pugeot 307 1.6 petrol bosch m7.4.4 can not make ecu virgin adaptation.....I resolved with launch

[royalkey]

Hi guys can the X100 program wireless remote onto 2008 Nissan note with knob.
Customer lost smart key but still has blade key. https://uploads.tapatalk-cdn.com/20180523/36114a8a397d234b0e176172d81b4c7d.jpg

Sent from my NX563J using Tapatalk

[SMP7]

2008 Nissan which model?

[royalkey]

Nissan Note E11, JDM. I can calculate 4 digit pin, but I've tried all options on Nissan v31.45 but I can't seem to add the key.
The key is new from dealer, correct frequency 315, and battery is OK and it's transmitting. Does this model require getting to the immobiliser for any reason or it should be just a simple fix?

Sent from my NX563J using Tapatalk

[Weasel3]

Nissan Note E11, JDM. I can calculate 4 digit pin, but I've tried all options on Nissan v31.45 but I can't seem to add the key.
The key is new from dealer, correct frequency 315, and battery is OK and it's transmitting. Does this model require getting to the immobiliser for any reason or it should be just a simple fix?

Sent from my NX563J using Tapatalk

Take out the key blade, and scan it. To verify that there is no transponder inside it. If it is filled with silicon.
If it is two transponders close to each other, when doing programming. This problem will occur.
I have experienced this. New CN key delivered from UK.

But maybe your problem is something else.

[royalkey]

Take out the key blade, and scan it. To verify that there is no transponder inside it. If it is filled with silicon.
If it is two transponders close to each other, when doing programming. This problem will occur.
I have experienced this. New CN key delivered from UK.

But maybe your problem is something else.Yes it does have transponder id46, the key on the smart key isn't cut yet so I can't insert it into the knob, I also haven't programmed the transponder as my key tool won't copy onto Nissan original chip.
I was thinking once the remote programming works it should be able to unlock and start the car as its a keyless system.. https://uploads.tapatalk-cdn.com/20180524/09cfe0f2de96e2c16db3c7142bcc901b.jpg

Sent from my NX563J using Tapatalk

[Weasel3]

I see you scanned the hole smart key.
And I want you to scan only the key blade.
Remove it from the smart key and do the scan.

Then you can verify that keyblade is empty.

[royalkey]

I scanned the emergency key on it's own and it's also a blank id46.
I see you scanned the hole smart key.
And I want you to scan only the key blade.
Remove it from the smart key and do the scan.

Then you can verify that keyblade is empty.

Sent from my NX563J using Tapatalk

[Weasel3]

Then you remove the emergency key blade out of the vehicle.
Place it on the bench outside the car.

And try one more time to program the smart key to the vehicle.
It should work.

I verified this myself scanning a friends vehicle, to confirm that in my case the blade should be empty.
And it worked out all right, after this.

[royalkey]

Ok will give it a try and report back..
Then you remove the emergency key blade out of the vehicle.
Place it on the bench outside the car.

And try one more time to program the smart key to the vehicle.
It should work.

I verified this myself scanning a friends vehicle, to confirm that in my case the blade should be empty.
And it worked out all right, after this.

Sent from my NX563J using Tapatalk

[CarTechnology]

Can X100pro program Landrover Freelander 2 key?Did you tried LandRover FreeLander 2 with x100 ...???

Envoyé de mon SM-N9005 en utilisant Tapatalk

[ketia]

Touareg 2008? odo ok

[nazz2]

Polo 9N , lost chip, pulled pin and programmed in the TP chip in no time.

[Nikola1309]

VW Sharan 2002 1.9tdi fail to pull pin code.

[dimitar]

Ford focus 2002 key erase...key programing....add key ....... All fail

Done with forscan

[yui]

lexus 2007 smart key add all versions not work
with launch same car no problem

[dimitar]

Honda jazz 2012 add key ok

[azeem786]

is it good for vw and audi ... over 2013?

[honingkoning]

is it good for vw and audi ... over 2013?

Hahaha just buy vag k+can 1.4 for this cars [emoji1][emoji1][emoji1]

[hcip]

OBDSTAR XDP 300 Smartkey for toyota corolla altis 2008 year cannot add key/remote (Program success but the key doesnt learn to a car)

OBDSTAR X100 do it

[K1nd3r]

x300 dp Toyota emulators works?

[SMP7]

x300 dp Toyota emulators works?

You have P001 Programmer and Toyota simulation smart keys?

[K1nd3r]

You have P001 Programmer and Toyota simulation smart keys?

thinking about purchase full package, works?

[SMP7]

thinking about purchase full package, works?

Obdstar released video on Youtube

https://www.youtube.com/watch?v=gYkKcYefz-M

Key Master DP Plus do Key Programming with Toyota simulation smart keys

[PremierD]

Obdstar released video on Youtube

https://www.youtube.com/watch?v=gYkKcYefz-M

Key Master DP Plus do Key Programming with Toyota simulation smart keys


Title of the thread is ... OBDSTAR X 100 pro IMMO & Remote Feedback... has effall to do with promoting KeymasterDP........:banghead:

(you are using up all your chances on this forum to genuinely help your customers) :)

[jodge]

working
Citroen C3 2004 erase all keys + add new key + add old key
Peugeot 207 SW 2008 erase all keys + add new key + add 2 old keys
Ford Mondeo 2004 AKL

not working
Skoda Roomster 2009 pin reading
Ford Focus 2005 add new key

[SMP7]

working
Citroen C3 2004 erase all keys + add new key + add old key
Peugeot 207 SW 2008 erase all keys + add new key + add 2 old keys
Ford Mondeo 2004 AKL

not working
Skoda Roomster 2009 pin reading
Ford Focus 2005 add new key

If it is operation failure, need log file to find whats wrong

[generalelect1]

hello all DK member's
i need to program 2007 SSANGYONG ACTION with my X100tools , but no communication
how can i do it
thanks and regards

[SMP7]

hello all DK member's
i need to program 2007 SSANGYONG ACTION with my X100tools , but no communication
how can i do it
thanks and regards

Did you try again? What did the device display exactly?

[hcip]

@SMP7
Where can I buy the OBDSTAR H-J Model ?
Thanks in advance

[SMP7]

@SMP7
Where can I buy the OBDSTAR H-J Model ?
Thanks in advance

Hello, you can buy H-J directly online, such as: Aliexpress.....

[hcip]

Hello, you can buy H-J directly online, such as: Aliexpress.....

Cannot find on official site and alliexpress

I am looking for the type attached in picture

Thanks

[autoTkey]

Do you have any details on OBDSTAR H-J functionality? This must be so new maybe even OBDSTAR don't know they have it.

[ucokseparoh]

OBDSTAR HJ is a spesifically designed programmer for Indonesia market, only sold in Indonesia and it covers 7 brands if memory serves correct. The only thing they sell through it is the ability to program Toyota Avanza G, Daihatsu G and Toyota HitagPro (pcf7939v found in Wigo/Agya and some Daihatsu models - but this also can be done with x100 through ID49 menu).

Better get x100 tab from xtool (spesifically designed for Indonesia too) and it does the same as x100 pad2, but may be without update. Throw me PM if you want to get one.

[SMP7]

Cannot find on official site and alliexpress

I am looking for the type attached in picture

Thanks

PT.Doctor Kunci Nusantara

Kantor: MAL.MGK KEMAYORAN,Lt.I B-8 NO.3JI.Angkasa Kav.B-6, Kemayoran Jakarta Pusat
Kode Pos: 10610
TLP:021-2913 5154
HP: 0822 97777 110 0878 97777 110
Email: Dr_Kunci@aliyun.com

[HeXeN]

Obdstar tablet DP - Mitsubishi RVR USA 315MHz - didn't program but locked aftermarket key.
The key before programming was for sure Unlocked because was tested on VVDI2.

[SMP7]

Obdstar tablet DP - Mitsubishi RVR USA 315MHz - didn't program but locked aftermarket key.
The key before programming was for sure Unlocked because was tested on VVDI2.

Where are you from pls? Can contact customer service accordingly

[u.s]

Anyone tried Jaguar XF?

[Brof]

Whats the best software version for this tool? i see a few posts regarding updates and car models been removed ,

[SMP7]

Whats the best software version for this tool? i see a few posts regarding updates and car models been removed ,

didn't remove, but almost no updates in future

[PremierD]

Why ???????????????????????????????????????..

[javyb]

Why ???????????????????????????????????????..Cos there scammers

Sent from my SM-N960F using Tapatalk

[PremierD]

lol I'm shocked and astounded at that revelation mate :roflmao:

[jodge]

Why ???????????????????????????????????????..

here is your answer

http://www.digital-kaos.co.uk/forums/showthread.php/647853-X300-Pro3-and-DP-pad-and-keymaster-DP-yes-or-no-fail-success?p=3403477&viewfull=1#post3403477

[ROMIR]

I'm going to do tests when Ford enters the workshop for lost key, there I will try different versions, to see if there is a real problem or just bad luck.

Hi guys
in my x100 pros i have V32.16 V32.18 and V32.20 for FORD menu. Does anyone have any older sw version that was working well?
Please post them here to help others

BR

[hcip]

Hi guys
in my x100 pros i have V32.16 V32.18 and V32.20 for FORD menu. Does anyone have any older sw version that was working well?
Please post them here to help others

BR

Downloaded software from other user will not work in other handheld, it has a serial number and license file

[Brof]

So in other words your screwed if your looking for older software version?

[hcip]

So in other words your screwed if your looking for older software version?

yes.... and they also erase the old softwares in their website....

only the 3 software left that never work, this is maybe their idea so that user will think to buy their new machine,

[norman1967]

When I bought my x100 it was promoted with 3 years free updates. That offer was withdrawn and new tools were brought out x300 f100 all that stuff



Lucky for me 12 month later I realised very quick they were deleting good working km solutions

They did not delete prev versions at that time. I have never updated again and I've vowed never to buy obdstar products again. In fact it's now very rare I will by at China products I've more or less gone completeley genuine tools only now.

[Brof]

didn't remove, but almost no updates in future

I want the older versions of the software?

[jodge]

Not working.
Each machine using unique licence files. Only the older sw version without the proper licence file...just garbage

[Brof]

Not working.
Each machine using unique licence files. Only the older sw version without the proper licence file...just garbage

Can anyone say which software version does the unit ship with out of the box?

[hcip]

When I bought my X100 pro, I changed the SDCARD to 8Gig so that it expand the storage size and will have more space for upgrade, and not deleting the very old software.....

[Keresztapa]

Corsa C 2003: pin read: fail, odo: fail
Corsa C facelift 2004: pin read: fail, odo: fail

Seat Arosa 2001: odo: fail

Renault Clio 2, 2001: pin read: fail, odo: fail

Ford Focus 1, 2001: key: fail, odo: fail
Ford Focus facelift 2004: key: fail, odo: fail
Ford Focus 2 facelift 2008: key: fail, odo: fail


All car:
580850580851

[SMP7]

Corsa C 2003: pin read: fail, odo: fail
Corsa C facelift 2004: pin read: fail, odo: fail

Seat Arosa 2001: odo: fail

Renault Clio 2, 2001: pin read: fail, odo: fail

Ford Focus 1, 2001: key: fail, odo: fail
Ford Focus facelift 2004: key: fail, odo: fail
Ford Focus 2 facelift 2008: key: fail, odo: fail


All car:
580850580851

which device pls? looks like X200 Pro from the picture

[Keresztapa]

580884 X100Pros, ORIGINAL, registered (obdstar.com) 😡😡

[jodge]

Corsa C 2003: pin read: fail, odo: fail
Corsa C facelift 2004: pin read: fail, odo: fail

Seat Arosa 2001: odo: fail

Renault Clio 2, 2001: pin read: fail, odo: fail

Ford Focus 1, 2001: key: fail, odo: fail
Ford Focus facelift 2004: key: fail, odo: fail
Ford Focus 2 facelift 2008: key: fail, odo: fail


All car:
580850580851


join to the club mate :D
https://www.digital-kaos.co.uk/forums/showthread.php/673771-gt-gt-gt-gt-gt-gt-gt-gt-gt-gt-gt-gt-gt-gt-gt-OBDSTAR-Device-Support-(or-lack-of-it-to-be-more-accurate)-lt-lt-lt-lt-lt-lt

[SMP7]

580884 X100Pros, ORIGINAL, registered (obdstar.com) 

Please send the log file

[Keresztapa]

Okay, I'm sending you today.

Keresztapa

[PremierD]

waste of time mate ...

[Keresztapa]

Logfile:

M3_IMFORD:

š¬üüüőŚuśő”őőźf´†ľ.~eLôEEíő”őőĽÇćÜő”őőÄż÷÷…~ ˙§÷ÇOmő”őő´Çć†T÷ő”őőĽ˙×őő”őőôďţ–d÷ţŢ˝näÇNő”őőÄ˙7 ?…l.ď·Ď˝őĽĺśśţőĽőśśöő”ýő¬ý˜„ý´őŚőśő”ýőý˜ěőMŚĹüL äÂmÔdÔlłőŚőśő”ýőý˜ěőMŚĹüLäÂmÔdÔlłőŚőśő”ýőý˜ěőMŚĹ üLäÂmÔdÔlłőŚőśő”őőÔ˙7]ţż§÷Wő”őő¬w·?m×ő”őőÔ|UU?%E=ýőĽĺśśţőĽőśśő”ýőÄýśÜ őM’DkĄź
ő~íśś®KcDGĄdţmÔÔÔ<j\uŻĺ„|„läâkÜGä¶ţnÎő”ýőÄýśÜőM’Dk],öőěýśś®KcDG]dţm\Ćő”ýőÄýśÜőM’DkÜ~öőěýśś®KcDGÜdţm\żő”őőüŻ·W˙çĎĎ ˙/]¦őĽĺśśţőĽőśśîő”ýőÄýśÜőM’DkÜ~öőěýśś®KcDGÜdţm\żő”ýőô ýśĚőM’DkMjŢčÜőŚőśő”ýőôýśĚőM’DkMjŢčÜőüýśśľKcDŻRDî¦ő ”őőĚß—eFµž——˙őĽĺśśţőĽőśśţő”ýőÄýśÜőM’DkÜ~öőěýśś®Kc DGÜdţm\żő”ýőôýśĚőM’DkMjFżÜőäýśś¦KcDŻRÜ˙k„d˙ő”ýőôýś ĚőM’DkMjŢčÜőüýśśľKcDŻRDî¦ő”ýőÄýśÜőM’DkÜ~öőěýśś®KcD GÜdţm\żő”ýőÄýśÜőM’DkĄźöőěýśś®KcDGĄdţmÔÔő”ýőôýśĚőM’ DkMjVnÜőüýśśľKcDŻRĚgŰő”ýőôýśĚőM’DkMjßÔÜőŚőśő”őőĽÇć Üő”őőÄż÷÷…~˙§÷ÇOmő”őő´Çć†T÷ő”őő„_–

[jodge]

They don't care mate. Most of the obdstar customer realised now. If you want to continue you must to invest some serious stuff.

[Keresztapa]

For example?

[jodge]

What is your main goal? Dash or keys?
AVDI, Smart Pro, DiagSpeed, Autohex and some others. You can work with the chinese stuffs but in the end you will pay. Probably to the owner...

[Keresztapa]

keys

Best Reg.

[labusas]

Hi,
My X100 PAD2 stopped undating recently:

Get arror: "GetupdatellistEx: Error Code=5. Data does not exist"

Any help in solving?

[Weasel3]

Hi,
My X100 PAD2 stopped undating recently:

Get arror: "GetupdatellistEx: Error Code=5. Data does not exist"

Any help in solving?

Yes, No problem. Just pay 400USD if it is Xtooltech version. 1 year subscription of free updates. And you will get updates again. 200USD less than the K518.

What annoying me with their website, is that they newer write what's the latest immo updates is. Like many of the other websites.
Who is willing to pay 400USD. Not knowing what you get, of latest updates.
They mix all updates in one big list. And not specified IMMO only.

I don't care about other stuff. Like ordinary OBD things. Like updated the latest diesel injector of Opel 2018.

What they need is to keep their IMMO updates in a separate field.
So those who has an interest can get actual info. To verify that the 400USD yearly subscription, is worth to pay. FINALE.

[SMP7]

Hi,
My X100 PAD2 stopped undating recently:

Get arror: "GetupdatellistEx: Error Code=5. Data does not exist"

Any help in solving?

When did you buy the device?

[sashaxab]

He can read pin psa and adjuste odometre psa?

peugeot 508 reads bsi and dashboard. write panel failed. bsi through time many communication breaks

[autoTkey]

So SMP7 can you tell us how to download all OLDER versions of the software for our own tools?
Please don't tell me there's no way or that you erased them.

[hcip]

So SMP7 can you tell us how to download all OLDER versions of the software for our own tools?
Please don't tell me there's no way or that you erased them.

So sorry.... They erased everything that works.... My XDP is useless now, X100 still working the things that XDP not worked

[SMP7]

you mean the old software in X300 DP has been erased?

[hivrich]

Toyota Highlander 2014 add smart key Type 4(With H)

[SMP7]

So SMP7 can you tell us how to download all OLDER versions of the software for our own tools?
Please don't tell me there's no way or that you erased them.

lost software considered to be the expiration of update. Pls contact your local dealer to prolong the update time

[Faraday]

Here is my experience with OBDSTAR products.

I bought x100 some cars were ok others not, in 2 years they annouce x100pro they force me to upgrade to new product ( i been told that old x100 is weak hardware and ..... bla bla bla)
they give discount on so called upgrade I said ok. I recived my new interface and again some cars work ok others not.
After 1 year they make new product x300 pro and again I been told weak hardware bla bla i asked for discount this time been told no discount for loyal customer.
This time I said it is enough. And again 1 year past and they make new product.

Here are my thoughts

1. They don't care about customers
2. They do updates that remove funcionality of their products,
3. They don't care about loyal customers,
4. They just want your money.


I don't recommend this brand

[SMP7]

So SMP7 can you tell us how to download all OLDER versions of the software for our own tools?
Please don't tell me there's no way or that you erased them.

Pls try to log out and then log in. The device will revert back to your last free update version

For update: in the settings under user, log out and log in then update.

[SMP7]

Here is my experience with OBDSTAR products.

I bought x100 some cars were ok others not, in 2 years they annouce x100pro they force me to upgrade to new product ( i been told that old x100 is weak hardware and ..... bla bla bla)
they give discount on so called upgrade I said ok. I recived my new interface and again some cars work ok others not.
After 1 year they make new product x300 pro and again I been told weak hardware bla bla i asked for discount this time been told no discount for loyal customer.
This time I said it is enough. And again 1 year past and they make new product.

Here are my thoughts

1. They don't care about customers
2. They do updates that remove funcionality of their products,
3. They don't care about loyal customers,
4. They just want your money.


I don't recommend this brand






Sorry about the experience here

1. For cars doesn't work, you can contact after service to check the problem

2. X100 Pro is an old device, weak hardware for newly developed really happens

3. Obdstar didn't remove software from device. If you lost some software, pls try the method in the post above

[Faraday]

Sorry about the experience here

1. For cars doesn't work, you can contact after service to check the problem

2. X100 Pro is an old device, weak hardware for newly developed really happens

3. Obdstar didn't remove software from device. If you lost some software, pls try the method in the post above


And again same %$^&$#^

I mean updates you make, remove funcionality on older products.

[hcip]

And again same %$^&$#^

I mean updates you make, remove funcionality on older products.

When I first received the XDP tool, it work on some ford vehicles, after a lot of upgrading, it doesnt work, (Immo and Mileage)

also Toyota Key calculation on server doesnt work

[SMP7]

When I first received the XDP tool, it work on some ford vehicles, after a lot of upgrading, it doesnt work, (Immo and Mileage)

also Toyota Key calculation on server doesnt work

Pls send the lod file to solve the bug

[Brof]

Pls send the lod file to solve the bug

What Bug? There is no bug! Obdstar are removing functionality of the x100 pro with so called new updates, As far as i am concerned you well understand whats going on here, but use the same old excuses,

send log file
where you from
contact service support

I have done all this and still NOTHING,

We want the old software that worked! Not Bullshit,

Im thankfull i only bought it to do certain cars, but it dont even do these anymore, I really feel for the people that bought the more expensive gear.

I count myself lucky, and will never buy an obdstar product again.

[SMP7]

What Bug? There is no bug! Obdstar are removing functionality of the x100 pro with so called new updates, As far as i am concerned you well understand whats going on here, but use the same old excuses,

send log file
where you from
contact service support

I have done all this and still NOTHING,

We want the old software that worked! Not Bullshit,

Im thankfull i only bought it to do certain cars, but it dont even do these anymore, I really feel for the people that bought the more expensive gear.

I count myself lucky, and will never buy an obdstar product again.

Did you try the method: log out--->log in--->then upgrade?

[u.s]

time to boycott and ban OBDSTAR !
enough is enough...

[lock66]

I have X100 and X100PRO.
To receive updates, I bought a new X300pro3.
But within three months the device is almost not updated.And 1 year after the registration of the device, you will again have to pay for updates.Which also will not.I do not recommend buying X300Pro3.

[pierre renault]

Hi, please what continues to be updated on OBDSTAR X100 PRO?

[dimitar]

Hi, please what continues to be updated on OBDSTAR X100 PRO?

nothing

only downgrading

[SMP7]

Hi, please what continues to be updated on OBDSTAR X100 PRO?

For X100 Pro, there is almost no upgrade now due to hardware problem.

[Faraday]

For X100 Pro, there is almost no upgrade now due to hardware problem.

can you explain what do you mean by 'hardware problem'

last time when I change x100 to 100pro I been told the same bu#%$@&t

[SMP7]

can you explain what do you mean by 'hardware problem'

last time when I change x100 to 100pro I been told the same bu#%$@&t

New upgrade needs to update online, X100 Pro doesn't support

[PremierD]

Then pull your thumb out of your A$$.. and get it to work ..

[hcip]

I have X100 and X100PRO.
To receive updates, I bought a new X300pro3.
But within three months the device is almost not updated.And 1 year after the registration of the device, you will again have to pay for updates.Which also will not.I do not recommend buying X300Pro3.

I want a relief of my headache....... so I gave my XDP300 to a friend...

[rtbdiagnostic]

need advice having a 2012 ford ranger t6 with remote unlocking but not locking the door see image of key any advice maybe with x100pro to solve issue :tears_of_joy:

[dimitar]

GEM module problem or faulty key switch

[eliaselias]

Ford mustang 2015 smart key
Add key job... Security verification failed
X100pro

[SMP7]

Ford mustang 2015 smart key
Add key job... Security verification failed
X100pro

which menu did you enter?

[eliaselias]

ford--->smartkey--->for mustang 2015

[SMP7]

ford--->smartkey--->for mustang 2015

Sent PM to you

[eliaselias]

i tried ford mustang 2018 add smart keyless without any existence of old smart keyless could not do..then i tried all key lost it make me wait more then 1 hour... could not do.... i used obdstar xdp




...finally i plugged another usa original tool who did job in 1 minute only with using add key button

[CPimport]

Renault Megane 2004 keycard - programmed 3 new cards - SUCCESS!!

I normally use TrueCode, but my PC had problems with adapter, so as a last chance i found my X 100 Pro and gave it a try... and it worked!!! i did not expect it to work, it normally doesn't :-)

[crazylou2017]

644595
644596
644597
644598
644599

OBDSTAR reproduce OBDSTAR X100 PRO in 2019 and as you can see it is gray color (the former one is red), it is supposed to be cheaper.
Also works as one key programmer, one odometer correction tool, one OBD diagnostic tool.

[dimitar]

There is no support for x100pro and they are selling it as a new product???
Cant beleive i bought this shit

[crazylou2017]

There is no support for x100pro and they are selling it as a new product???
Cant beleive i bought this shit

OBDSTAR X100 PRO in gray color is improved at:
1.Red color to gray color.

2. 200USD cheaper price.

3. the software downloading speed is improved by more than 50%.

4. Add EEPROM Chip reading for free.

5. New upgraded software operating system, added operating interactive prompt

6. High-capacity 4G TF card, more stable performance, never appear white screen

7. New design of PCB hardware, greatly improved configuration

OBDSTAR X100 PRO advantages and disadvantages:
1). Have less car makes, not works with newest car makes i.e 2018 2019 year.
Most car models before 2012 year: YES
Mazda odometer connection: No problem
Hyundai (a partial) IMMO: No problem
Nissan key adding: no problem.
VAG 4th /5th generation: NO
MQB: NO
2) Easy to operate by the guided menu programming.
Odometer correction job is done by OBD.

[alle bmw]

nonono



nono

[thesithlord01]

Will it program 2006 infinity fx35 ?


infinty ex2008 smart key failed
nissan murano 2009 failed

[thesithlord01]

2013 Toyota sienna smart key programmed successfully

[randyrash]

2010 Toyota Rav4 - non push start - programmed successfully.

[randyrash]

2006 Pontiac G6 - All keys lost - doesnt work. Had to use youtubed procedure.

[obdserwisPL]

BMW FEM/BDC adding key failed

On programming FEM/BDC step got 'conditional incorrect or request order error'.

Tested on F30, F20, on bench and on car

Finally VVDI2 done job

[Raffy haddad]

Shame on you obd star . don't give crap excuse you know what we mean i ve been since 2 uears asking you to get us back our working software by your teck support and on forums . always or late reply what car model or no reply at all
I join my voice with my collegue will never buy from your company anymore

[randyrash]

2016 Cherokee Trailhawk Fobik - Says learn success, but it doesnt work.

[thesithlord01]

i tried it out and it programmed successfully... Thanks

Will it program 2006 infinity fx35 ?

[randyrash]

2013 Honda CRV - Add Key Successful - Had to use the -2011 option though.

[randyrash]

2010 journey - add key successful - had to play around with different types.

[nenadgorgi]

X100 Pros Green

Honda Jazz 2006 8E transponder add key -OK

Skoda Fabia 2006 Add key and pin read -Not Ok Add remote - Ok

Passat B5 1999 Pin read from cluster - Not Ok

Chevrolet Matiz 2005 Add Key - Ok

Suzuki Sx4 2011 Mileage -Ok

[randyrash]

2008 Nissan Rogue - Prox Knob - Add key successful.

[nenadgorgi]

Opel Corsa D
pin read from bcm not possible it only restart bcm

pin read - Not Ok