PDA

View Full Version : 06J906026DA med17.5 corrupt e2p, possible to virginize?



k0mpresd
6th October, 2016, 03:51 PM
i have a corrupt med17.5 e2p. it seems someone wrote all 00 for the immo ID.

is it possible to virginize or fix this e2p to allow immo to be adapted properly (or immo off) ?
attached flash and e2p.

regards.

Crash-100
6th October, 2016, 08:22 PM
do you have dump from comford module ?

k0mpresd
6th October, 2016, 08:34 PM
do you have dump from comford module ?

no, i do not.

yugo45
7th October, 2016, 12:30 AM
Immo ID is good, that is how they will be in Passat.

Is it VIN form Eeprom dump matching a car?

Does that car starts and cut off after 2-3 sec?
Or just cranking and not run at all?

k0mpresd
7th October, 2016, 01:05 AM
Immo ID is good, that is how they will be in Passat.

Is it VIN form Eeprom dump matching a car?

Does that car starts and cut off after 2-3 sec?
Or just cranking and not run at all?

hi, thanks for the reply.

i am not the first person to touch the ecu.
i was told someone attempted to adapt the ecu to a car and it would not take. the ecu has a chksum fault. some data in e2p seems to be incorrect.
i tried immo off and to reflash software from sgo file however this does not work as the data is corrupt somewhere and ecu rejects programming.
i have verified chksum in both flash and e2p.

i found on my laptop a matching 06J906026DA file set i did not know i had. you are correct. the immo ID is not corrupt.

Crash-100
7th October, 2016, 07:38 AM
may be you have first files without checksum correction ?
read comfort module we can try adapt

k0mpresd
7th October, 2016, 08:04 AM
may be you have first files without checksum correction ?
read comfort module we can try adapt

i do not have access to comfort module.

i am very interested in my original question, is it possible to virginize an e2p file?

Crash-100
7th October, 2016, 09:46 AM
You can't make virgine this is not PSA!!!!!!!!!!
1. Adapt to car need dump from comfort or by OBDII.
2. Make immoff.

lupu_sandu
7th October, 2016, 10:13 AM
Yes, can be possible to set virgin (immo status 04) but still need proper tools to adapt via obd2.

yugo45
7th October, 2016, 03:56 PM
hi, thanks for the reply.


i found on my laptop a matching 06J906026DA file set i did not know i had. you are correct. the immo ID is not corrupt.

Can you post that other ECU files?

k0mpresd
7th October, 2016, 11:42 PM
Yes, can be possible to set virgin (immo status 04) but still need proper tools to adapt via obd2.

this is what i need. some of the immo data in this e2p is corrupted and not matched to ecu flash anymore.

Crash-100
8th October, 2016, 08:06 AM
this is what i need. some of the immo data in this e2p is corrupted and not matched to ecu flash anymore.

you whant to do or talk about it ?

yugo45
9th October, 2016, 03:46 PM
@KOMPRESD

I asked you can you post files that you have form spare ECU, the one you said in post #5 ????????

k0mpresd
9th October, 2016, 05:34 PM
You can't make virgine this is not PSA!!!!!!!!!!
1. Adapt to car need dump from comfort or by OBDII.
2. Make immoff.

immo off does not work. the e2p and flash data does not match. immo off will not fix that.



@KOMPRESD

I asked you can you post files that you have form spare ECU, the one you said in post #5 ????????

attached.