VVDI KEY TOOL

[Maartinj]

99% EU and US will cover both , because in EU also loot cars from US .

[dustin2014]

It was told already
China
India
EU
US
There is 4 different version and can not be change beetwen
if you are from EU , and order Keytool from China - it will not work
I bough the remotes to work with VVDI2 last year. At the time I was told to wait until English was added to VVDI2 and then they would work.

[Fallen]

I bough the remotes to work with VVDI2 last year. At the time I was told to wait until English was added to VVDI2 and then they would work.

Spot on.

Why did my VVDI keytool display English when I bought it but now it only displays Chinese?
The language menu was intentionally removed.

Why is the English version more expensive than the Chinese version?

[Maartinj]

Spot on.

Why did my VVDI keytool display English when I bought it but now it only displays Chinese?
The language menu was intentionally removed.

Why is the English version more expensive than the Chinese version?
They will fix Lang version after new update , I have few EU also with China lang already
Regarding price - price depend seller .
To get item to EU , must pay higher shipping cost , tax etc.
also if you not use US $ there is exchange rate too
price in China is about 300-400$
in EU (EU model) cost about 300€

[lidons]

They will fix Lang version after new update , I have few EU also with China lang already
Regarding price - price depend seller .
To get item to EU , must pay higher shipping cost , tax etc.
also if you not use US $ there is exchange rate too
price in China is about 300-400$
in EU (EU model) cost about 300?
I do not think that is a correct excuse, if you pay in euros you get benefits in exchange for dollar, euro going up, the sending indicates the seller + with machine, unless it is free to send america, customs and tax is paid in destinations . Personally think that they are a little lost xhorse with this machine, the reason very simple, in vvdi2 have not yet managed to fix the remotes in English language, I will update my machine and I will see the consequences, total now the machine is green in process. :)

[redliner]

I can buy China version from less than 200usd with free shipping. English cost twice as much. So deduct previous posts the English version is a Chinese just English menu? so what is the point to buy EN when you can't do EU cars?. I though CN can do EU cars so you can use your smartphone with google translator :applause:
462499

[metalik]

Someone try copy crypto 46 by vvdi key tool? What is working in this tool?

Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka

[lidons]

DANGER ??? - NO, update, wait for new update.

http://subefotos.com/ver/?b515901d5179716a1545c04725a1b5d9o.png

[lpf01]

DANGER ??? - NO, update, wait for new update.

http://subefotos.com/ver/?b515901d5179716a1545c04725a1b5d9o.png

I had s*cked it too, Samic said it will have an update next week and fix this issue.

[Maartinj]

Yes, we are waiting for new Software.

[metalik]

BMW key renev its working ok, remote work.

[Samic]

VVDI KEY TOOL latest software version V2.3.8 update
firmware version V2.0.2 [2017-07-16]
-----------------------------------
Attention: This update only for North American or India English version(na,na-en,in,in-en). Other languages will be released on next week,
please get Device Info to check language version.
This version must be updated with V2.3.8 and above. The upgrade may take about 30 minutes
1.transponder clone
+add chrysler 4D-64(4E) clone
+add toyota-G offline clone
+add hyundai ID-70 online clone(Use Calcuate option in upgrade software)
+add ford ID-83 online clone(Use Calcuate option in upgrade software)
+add ID-4A indentify
2.generate transponder
+add toyota-G to generate special transponder
3.remote renew
+add more than 86 remote&keyless go prox unlock
4.remote prepare
*fixed XN serial keys problem on ID47 such as suzuki
5.add more vehicles data and fixed some bugs

please use the latest software version,any problem post here.

[jose9413]

VVDI KEY TOOL latest software version V2.3.8 update
firmware version V2.0.2 [2017-07-16]
-----------------------------------
Attention: This update only for North American or India English version(na,na-en,in,in-en). Other languages will be released on next week,
please get Device Info to check language version.
This version must be updated with V2.3.8 and above. The upgrade may take about 30 minutes
1.transponder clone
+add chrysler 4D-64(4E) clone
+add toyota-G offline clone
+add hyundai ID-70 online clone(Use Calcuate option in upgrade software)
+add ford ID-83 online clone(Use Calcuate option in upgrade software)
+add ID-4A indentify
2.generate transponder
+add toyota-G to generate special transponder
3.remote renew
+add more than 86 remote&keyless go prox unlock
4.remote prepare
*fixed XN serial keys problem on ID47 such as suzuki
5.add more vehicles data and fixed some bugs

please use the latest software version,any problem post here.

Hello samic, i messaged you about an xhorse mini i bought and i sent you a message a skype, can you please help me out

[ucokseparoh]

which version is for ASEAN region? TiA.

[wd bau]

hi

is the mk3 cable work with vvdi key tool to Virginie and renew remote??

[truedetective]

VVDI KEY TOOL latest software version V2.3.8 update
firmware version V2.0.2 [2017-07-16]
-----------------------------------
Attention: This update only for North American or India English version(na,na-en,in,in-en). Other languages will be released on next week,
please get Device Info to check language version.
This version must be updated with V2.3.8 and above. The upgrade may take about 30 minutes
1.transponder clone
+add chrysler 4D-64(4E) clone
+add toyota-G offline clone
+add hyundai ID-70 online clone(Use Calcuate option in upgrade software)
+add ford ID-83 online clone(Use Calcuate option in upgrade software)
+add ID-4A indentify
2.generate transponder
+add toyota-G to generate special transponder
3.remote renew
+add more than 86 remote&keyless go prox unlock
4.remote prepare
*fixed XN serial keys problem on ID47 such as suzuki
5.add more vehicles data and fixed some bugs

please use the latest software version,any problem post here.

Congratulations on the update. Looking forward to the ME-EN update (guessing thats Europe?) in the coming week.

[lpf01]

EN-EU is the europe

[truedetective]

EN-EU is the europe

Well thats worrying...what have I got then?

[hipolitogt]

How many tested this? Can somebody confirm what does and what not? I received It on SAT and still don"t know well what It can do on TP cloning.

Enviado desde mi SM-G955F mediante Tapatalk

[truedetective]

How many tested this? Can somebody confirm what does and what not? I received It on SAT and still don"t know well what It can do on TP cloning.

Enviado desde mi SM-G955F mediante Tapatalk
Clones ID46, 4D 40bit, 4C just fine.
I am unable to get the wireless keys to work but wired ones work great.

[lpf01]

Well thats worrying...what have I got then?

I really dont know, i just checked mine in update tool and it says en-eu


Az ?n iPhone k?sz?l?kemről k?ldve a Tapatalk seg?ts?g?vel

[ucokseparoh]

Well thats worrying...what have I got then?
ME = Middle East? [emoji16]


Sent from my ASUS_T00F using Tapatalk

[hipolitogt]

Clones ID46, 4D 40bit, 4C just fine.
I am unable to get the wireless keys to work but wired ones work great.
And delete used pcf7935/7936 for example?

Enviado desde mi SM-G955F mediante Tapatalk

[truedetective]

ME = Middle East? [emoji16]


Sent from my ASUS_T00F using Tapatalk

That makes sense but it's odd for them to send me that one in the UK

[djollie]

what keys do the adapters support for unlock?

http://i68.tinypic.com/213q1jt.jpg

[buga37]

V2.0.2 [2017-07-16]
* * * * * * * * * * * * * *
Attention: This update only for North American or India English version(na,na-en,in,in-en). Other languages will be released on next week,
please get Device Info to check language version.
This version must be updated with V2.3.8 and above. The upgrade may take about 30 minutes
1.transponder clone
+add chrysler 4D-64(4E) clone
+add toyota-G offline clone
+add hyundai ID-70 online clone(Use Calcuate option in upgrade software)
+add ford ID-83 online clone(Use Calcuate option in upgrade software)
+add ID-4A indentify
2.generate transponder
+add toyota-G to generate special transponder
3.remote renew
+add more than 86 remote&keyless go prox unlock
4.remote prepare
*fixed XN serial keys problem on ID47 such as suzuki
5.add more vehicles data and fixed some bugs

[CaioW]

what keys do the adapters support for unlock?

http://i68.tinypic.com/213q1jt.jpg

http://www.xhorsevvdi.com/upload/pro/vvdi-key-tool-remote-support-list.pdf

:)

[metalik]

http://www.xhorsevvdi.com/wholesale/vvdi-key-tool-adapter.html

[Maartinj]

this same price in EU , shipping from EU

[Master01]

đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

Watch my video

[hipolitogt]

https://www.youtube.com/watch?v=AUnVxQe09MY

Audi "PCF7945ATJ|B07" key with VVDI Key ToolOk, and schematics for make renew remotes without adapters?

Enviado desde mi SM-G955F mediante Tapatalk

[HeXeN]

Is this tool available yet?

[PremierD]

Yes............................

[louis21]

This is the remote renew wiring diagram,please refer to it. http://www.filefactory.com/file/3updd2c3408n/VVDIKEYTOOL_Renew_Diagram%EF%BC%88EN%EF%BC%89-v1.0.2.pdf

[totalkey]

any plans to copy id48 soon?

[dorofteius]

Where to buy from EU ?
Thank - You all.

[hipolitogt]

Ask xhorse.pl

Enviado desde mi SM-G955F mediante Tapatalk

[dorofteius]

No answer for today. Maibe tomorrow ...

[sniegavirs]

No answer for today. Maibe tomorrow ...xhorse.pl is also user Maartinj here on DK forum. Bought VVDI2 from him. Great guy to deal with ;)

[Maartinj]

No answer for today. Maibe tomorrow ...
I also have family etc ....
You got message already

[dorofteius]

No problem mate. I understand.
Aniway, iff it is ok i want-it yestarday .

And as a funny thing. Iff you wanted-it yesterday, why haven't you called idiot . :)) .
Thank You .

[Maartinj]

i sent you replay

[dorofteius]

Thank you Martin. Everithyng perfect.
Thank's again mate.

[PremierD]

Do not promote your own site mate .........:)

[lidons]

Are you using the firmware of the mk3 copy, or xhorse development?
Only unlock for original keys ,?
Or also emulated 7941att Chinese keys?

[louis21]

@tatalkey yes,add copy 48 in the near future
@lidons yes,temporarily only unlock the original keys

[Fallen]

Anybody got a link for the latest chinese update?

[metalik]

https://mega.nz/#!2howjaAD!TLQ8JjAkWuRbjq8ZjYqtoebKY_nAhOtUbstb1PG yID8

[Maartinj]

v2.3.9 for EU version

https://mega.nz/#!kQND3axJ!6iQmXsjWj9wusSsEr7HM5Ph6ymNq0N1yGTyDuO-ZLbw
http://imagizer.imageshack.us/v2/xq90/923/oGXd5u.png (https://imageshack.com/i/pnoGXd5up)

[thayer201]

v2.3.9 for EU version

https://mega.nz/#!kQND3axJ!6iQmXsjWj9wusSsEr7HM5Ph6ymNq0N1yGTyDuO-ZLbw
http://imagizer.imageshack.us/v2/xq90/923/oGXd5u.png (https://imageshack.com/i/pnoGXd5up)



has anyone used the update? me-en ?

[Maartinj]

has anyone used the update? me-en ?
I updated my test uniot today , less than 30min total
this is latest officiall version now

[thayer201]

I updated my test uniot today , less than 30min total
this is latest officiall version now

thanks - ive just done mine aswell now.

[lpf01]

i do, it worked :) ( eu )

[hipolitogt]

Updated in 15min.



v2.3.9 for EU version

https://mega.nz/#!kQND3axJ!6iQmXsjWj9wusSsEr7HM5Ph6ymNq0N1yGTyDuO-ZLbw
http://imagizer.imageshack.us/v2/xq90/923/oGXd5u.png (https://imageshack.com/i/pnoGXd5up)

[truedetective]

Updated 9 minutes something.
Still not able to program the wireless remotes - is anyone else having this issue? Goes through the motions just the remote isn't useable.
Also did we have the astra j/insignia 433mhz previously? I noticed that wasn't there. Couple of the menus seem like they might not be quite right on the remotes vs models but the concept is really good I like it a lot.
Frequency tester seems more sensitive now previously was a bit of a pain to use.
Good update! Looking forward to more!

[Maartinj]

Did some tezt with DX style Wireless remote and all good
But still some issue with 7941, graphic interface etc ... but they working on it
Who know what we talking - he will understand

[truedetective]

Did some tezt with DX style Wireless remote and all good
But still some issue with 7941, graphic interface etc ... but they working on it
Who know what we talking - he will understand

When I generate a wireless remote eg Citroen 0536 fsk. Chip generates fine but remote does not function. Same key works just fine with vvdi2. Wonder why yours works but mine does not.

[Maartinj]

When I generate a wireless remote eg Citroen 0536 fsk. Chip generates fine but remote does not function. Same key works just fine with vvdi2. Wonder why yours works but mine does not.
you test remote on frequency tester or with car ?
LED blink ?

[truedetective]

you test remote on frequency tester or with car ?
LED blink ?
No LED blink - no frequency shown on vvdi key tool or keydiy unit.

[louis21]

vvdi ok but key tool not?strange.please give the pictures of option choose to generate the remote in VVDI and key tool.By the way,what's car of Citroen,which year?,what's the frequency?

[Maartinj]

No LED blink - no frequency shown on vvdi key tool or keydiy unit.

LED not blink if you use Special TP change a nd change TP , after that need generate remote again and LED blink again
but if you did all correct, let me know more details, and i will forward this to manufacture

[clintezra]

Ok so I cloned a Nissan id46 using a cn3 chip.. all good!

But i couldnt sniff the data for a Vauxhall Vivaro!!!!

Any body test there key tool for me please... see if it works!
also i can buy xhorse remotes by wire
but what are the wireless types called?

And i have 10 standard black Vw style
but I can't see the name of the nb type for ps

[lpf01]

Yesterday i tried a PSA with flip key and it wont sniff the data too....


Az ?n iPhone k?sz?l?kemről k?ldve a Tapatalk seg?ts?g?vel

[lpf01]

Little more feedback:
- Old renault one button remote ID33 recognised as ID44 copy impossible, tried on 2 different cars
- Mitsubishi Carisma ID44 generated, something happened but not generated tp succesfully ( checked with tango) , car refused the transponder too

( and just a personal one, old graphic menu was far better than this new for me :) )

[truedetective]

LED not blink if you use Special TP change a nd change TP , after that need generate remote again and LED blink again
but if you did all correct, let me know more details, and i will forward this to manufacture

Did not change TP just generated.
Several different keys tried none works - I hope my unit is not defective!

[jose9413]

Anybody from xhorse here? I had a bad mother board on my condor xc mini and i finally got it replaced, i need it in english though, my serial number is KM03611722

[louis21]

Have done it for you,update it

[jose9413]

Have done it for you,update it

Awesome im updating now

[dorofteius]

Did some tezt with DX style Wireless remote and all good
But still some issue with 7941, graphic interface etc ... but they working on it
Who know what we talking - he will understand


Right. Today I tried to renew Insignia 2 button key, and it say "Erase Error " - pcf 7941 .

[louis21]

Please upload a picture of the key PCB,a picture of the erase error~

[dorofteius]

Mine definatly has a problem. I tried on astra H 2 button normal key.
And I have the same erase error. But with vvdi prog I can erase-it.... I can write in to it . So here are the photos .

http://i67.tinypic.com/2zhqghz.jpg
http://i64.tinypic.com/14c63vd.jpg
http://i67.tinypic.com/10r8tvs.jpg

[Partymad09]

you can program them use opcom if you have it bud

[dorofteius]

Lol mate. Used key from astra H and insignia , to other car with opcom.
Good joke .

[louis21]

I found that the black wire connection is different with renew diagram,please try the same as the diagram.then feedback,thank you

[dorofteius]

It is the same mate. I promiss. Look at the key.
It is just a point that is conected to the minus pad .
And same thing with astra h key . It works with vvdi prog, but not with vvdi keytool.

Does anibody have pinout for the ps2 connector?
Because I think it is a faulty cable.
As the remotes that are in the case work ok forr writing.

[louis21]

I considered of it,but I am not sure if they two locations are the same,I don't have the key. do you have other original key to test?

[dorofteius]

Yes. I have Astra H 2 buttons. I will make pictures today afthernoon .

[clintezra]

Cloned Nissan micra 4d fine
on a cn2 chip!

So there's a good source of chips out there!

However i ordered a load of stuff of xhorse and it's taken nearly a month here!
And uk or Europe based distribution that people know of!

[dorofteius]

Now I am sure that something is wrong with the device.
Tried on peugeot 21676652 key. But still "Erase Error " The key is good key.

Iff I leave "brown" - sda unconected , the voltage on vcc and scl is rising up to 3.4 volts.
When I conect sda on board ( on all three off them ), the voltage stay's at 0.04 volts on all lines - Vcc -Sda - Scl . It does not rise to 3.4 when I press write.

L.E . Same key , Vvdi-prog, it has erased-it. I can write anything I want in to it.



http://i.imgur.com/trmRKoV.jpg
http://i.imgur.com/lch1gzF.jpg

[Maartinj]

KeyTool still have not fully working software
ENG version for EU was made too early , and now any feedback with issue is a priceless
Everybody know the storry , when Keytool was display first time , and after a year - we have EU version not fully working
Some people who work close with Xhorse have BETA version of Key Tool with more options / model to choice , but still not sable.

[hipolitogt]

KeyTool still have not fully working software
ENG version for EU was made too early , and now any feedback with issue is a priceless
Everybody know the storry , when Keytool was display first time , and after a year - we have EU version not fully working
Some people who work close with Xhorse have BETA version of Key Tool with more options / model to choice , but still not sable.Today I tried to clone id46 Citroen c3 key. It couldn't sniff data... This goes to support... First time used, 0 profits...

Enviado desde mi SM-G955F mediante Tapatalk

[dorofteius]

Mine's always reading AA AA AA AA AA AA AA when sniffing remotes.
I tried Vw G5, Vw Sharan, 2x Dacia Logan, Peugeot 407 and peugeot 207.
On peugeot 508 it does not read anything at all.
I can try as many times as I want. These are my cars. It does not work in any position of the key. Just beep and AA AA AA AA AA AA .

[louis21]

thank you for your precious feedback,the problems you met when renew I have noted and give them to R&D,will fix them asap.
I'll update the news for you about this when SW is ready.any problem feel free to contact with me

[fixanycar]

How does remote unlock feature work on this tool? Any feedback for US keys market, especially the German cars keys, the posts mostly for French makes. In the manual there is no Toyota key unlock, true?

Sent from my XT1650 using Tapatalk

[keysmith]

Don't know if anybody has posted this info yet, its an application guide on the remote unlocking. Shows which points to use with the cradle and free hand.

http://www.xhorsevvdi.com/upload/pro/vvdi-key-tool-remote-unlock-wiring-diagram.pdf

[fahmidhassan]

some Chinese sellers knocked me on fb and they say that its available for $180 usd.Is it true??

Sent from my HUAWEI RIO-L01 using Tapatalk

[sleepyrz]

http://www.uobdii.com/wholesale/xhorse-vvdi-key-tool-eeprom-adapter.html


the remote unlock adapters seem to be for sale

[lidons]

Can anyone try this remote? I think it does not work with 7961 vvditoolhttps://uploads.tapatalk-cdn.com/20170730/f28257dfc7a68d7b6a495ca58311d823.jpg

[louis21]

sorry,deleted

[dorofteius]

So we are guinea pigs. We bought something, that you can test on us .
Not good in my opinion. It means that all the thing's that I see on youtube are fake.
Can X-horse decide on witch tool we will have remote renew ?
It looks like FVDI already.
Allot of thing's that should work are just not doing anythimg.

[Basti13]

to Lidons I try just now and VVDI KEY TOOL not give power to remote , software problem i try with VOLVO and power coming on fine .
HYUNDAI SVI-CMFCH02 7952 ----- work fine after renew .
Vauxhall Corsa D chip 7941 --- not work
Renault AK010008 7961 ---- not work

More tests tomorow .

[louis21]

@hipolitogt can it copy the other 46 key?
@dorofteius these cars remotes your listed are generated,can't copy.

[lidons]

In short, 7945/52/53 works fine.
Pcf7941 / 61 Does not work.
In renewing key,
I think this is due to a hardware error and not a software bug

[louis21]

So we are guinea pigs. We bought something, that you can test on us .
Not good in my opinion. It means that all the thing's that I see on youtube are fake.
Can X-horse decide on witch tool we will have remote renew ?
It looks like FVDI already.
Allot of thing's that should work are just not doing anythimg.
Dear friends,Absolutly we didn't and won't test on you.the key tool renew,we have a lot of test,but there are many erase fail feedback,that's unexpected.we are checking and revising asap

[PremierD]

Just ignore that statement mate .. he moans and complains about everything ....:)

[dorofteius]

Right.
The tool work's perfect, but I am not capable of using-it.

[lidons]

@Louis21, I do not complain, I say in future to repair that Bug. :)
@PremierD, Sorry that I do not know how to use my machine, That's why I ask for advice, to know if it's me or my machine. :)

------ Now a reality
@dorofteius, (61) You undo renew button without result. :)

[dorofteius]

@Lidons. I don't understand the statment.
Yes probably they will fix the bug. I just hope that soon.
Otherwise, we can still buy files from mr. Solitaire for peugeot and opel keys. As vvdi-prog work's perfect with that.

[Samic]

thanks for all feedback on VVDI KEY TOOL, we are still working on fix bug and improve device.
about the renew remote function,if renew show failed.please take a clearly PCB photo of both sides.
about other problem feedback, we need the problem in detail,also will try my best to solve the problem.
if device not work well/with bugs please post here.

This is the download link of current version user manual & connection diagram

[truedetective]

thanks for all feedback on VVDI KEY TOOL, we are still working on fix bug and improve device.
about the renew remote function,if renew show failed.please take a clearly PCB photo of both sides.
about other problem feedback, we need the problem in detail,also will try my best to solve the problem.
if device not work well/with bugs please post here.

This is the download link of current version user manual & connection diagram
Thanks Samic! Looking forward to ID48 cloning becoming active.
Any ideas why I'm not able to generate wireless remotes?

[crazylou2017]

some Chinese sellers knocked me on fb and they say that its available for $180 usd.Is it true??

Sent from my HUAWEI RIO-L01 using Tapatalk

True or not, it's up to you. But just now I searched and find this thread: http://blog.uobdii.com/199usd-incl-shipping-to-get-one-xhorse-vvdi-key-tool/.
You could make a comparison.

[louis21]

Thanks Samic! Looking forward to ID48 cloning becoming active.
Any ideas why I'm not able to generate wireless remotes?
:)we'll add the ID48 cloning asap.
Did you install lithium battery in the wireless remotes when generating?

[truedetective]

:)we'll add the ID48 cloning asap.
Did you install lithium battery in the wireless remotes when generating?
Thanks for your reply.
Yeh battery installed it generates the remote however the red LED does not flash when you press the buttons and no signal is transmitted. Tried multiple xn-02 wireless remotes they all work fine with vvdi2 but not vvdi key tool.

[metalik]

I have the same problem, wireless remote dont work.

[louis21]

Thanks for your reply.
Yeh battery installed it generates the remote however the red LED does not flash when you press the buttons and no signal is transmitted. Tried multiple xn-02 wireless remotes they all work fine with vvdi2 but not vvdi key tool.
"the red LED does not flash when you press the buttons" after generating the remotes successfully?which remote did you generate?can you upload a video(link) of whole process to have a look?

[fvdigigital]

I have updated the version on 2.0.2
the design of the menu has changed
also icons were gone
now just list of functions

[truedetective]

"the red LED does not flash when you press the buttons" after generating the remotes successfully?which remote did you generate?can you upload a video(link) of whole process to have a look?
I'll add a video tomorrow if I get a chance but not much to see - I generate the remote (tried many makes no difference), vvdi key tool says successful and then the red light doesn't flash

[louis21]

@fvdigigital yes,the UI is different with version 1.2.8,the icons are in the menu under the functions.
@truedetective Refer to your describtion,thing becomes more clear.I think you have bought the chinese version wireless remotes,so it's not normal when you use it on the overseas key tool,you bought the wrong remotes.But it doesn't matter,the remotes you bought can be used when the next key tool software version release.So wait for the software.
@metalik I think your situation is the same with truedetective,please check when the next software release,if there is any problem,please let me know.

[fvdigigital]

louis21 (http://www.digital-kaos.co.uk/forums/member.php/521121-louis21)
thanks for the answer
but the menu with icons
looked much more beautifully))

[metalik]

Thx lousi21, when next update release?

[louis21]

Thx lousi21, when next update release?
About this weekend.next time should pay attention to buying the right remotes(match with your key tool).:)

[gokart]

//--mistake--

[jacostanzo]

wrong section

[Samic]

-----------------------------------Announcement---------------------------------


Dear Xhorse Users


In order to provide stable & smoothly online calculation from xhorse server, we will maintain & upgrade our server.
we will shutdown our server at 19:00-21:00(00:00GMT+8:00),9th August 2017.during this period, VVDI2, VVDI MB TOOL, VVDI KEY TOOL online calculation not available.
We apologize for any inconvenience this may have caused to you, thanks for your understanding and support!




Best Regards
Xhorse Team

[nickolasd]

i just got this tool US model from locksmith supplier from Florida USA, $210 shipped.


some Chinese sellers knocked me on fb and they say that its available for $180 usd.Is it true??

[eagleone-two]

Hi Samic,

Today I try to copy 7936(46) from alfa romeo 156 (blue immo box) to TPX4. First 3 step ok but step 4(write) not ok. Can't write TPX4.

[truedetective]

Hi Samic,

Today I try to copy 7936(46) from alfa romeo 156 (blue immo box) to TPX4. First 3 step ok but step 4(write) not ok. Can't write TPX4.

VVDI ID46 clone chips work well for me - try those perhaps?

[louis21]

Yes,should use the vvdi id46 chips or wireless remotes

[viejomatius]

Hello I've got Problems Renewing Dodge M3M remote, Now the key doesn't send frequency, attached pictured before and after renew, the 433 frequency is lost468119468120468121468123468124

now this key has been damaged for ever? or is there a way to recovery ? thanks

[borjapoo]

i have one vvdi key tool me-en,

clone id46 renault clio3 --- ok
clone remote in vvdi key ferrari style ---- ok
clone 4d kawasaki z750 2008------- ok
generate remote renault Truks ---- before last update ok , after update not ok
clone id46 renault trucks ----- ok
remotes ferrari style only works for clone remote if you want generate one new dont work

and i cant renew any remote, always erase error......

[louis21]

@viejomatius renewed successfully?but see from the picture,it seems the key is OK
@borjapoo "generate remote renault Truks ---- before last update ok , after update not ok". we'll check this remote data,if there is problem,we'll revise it.about renew the keys,please wait for the next FW version(coming soon),unlock at that time.Any problem please let me know.

[antotechaustin]

Hello I've got Problems Renewing Dodge M3M remote, Now the key doesn't send frequency, attached pictured before and after renew, the 433 frequency is lost468119468120468121468123468124

now this key has been damaged for ever? or is there a way to recovery ? thanks

I had same problem. I renewed 9x M3M with VVDI tool. 1 out of those 9 stopped sending signal after renewing successfully, transponder reads unlocked.

[eagleone-two]

Hi,

Please add copy transponder option in menu like handy baby.
Key tool have only read :-( HB copy TP works well.https://uploads.tapatalk-cdn.com/20170811/ed0858b2338d2b93e0eeb1b5f23c1ad4.jpghttps://uploads.tapatalk-cdn.com/20170811/da8eb11e8fe2c9d9cffd92dba2613e01.jpghttps://uploads.tapatalk-cdn.com/20170811/913e8bfcfcc40aca7add593b02efbe84.jpghttps://uploads.tapatalk-cdn.com/20170811/4fdcf1a835e739dba152375ee54ddede.jpg

[PremierD]

Then use the ~~~~in HB mate ... :banghead:

[viejomatius]

@viejomatius renewed successfully?but see from the picture,it seems the key is OK
@borjapoo "generate remote renault Truks ---- before last update ok , after update not ok". we'll check this remote data,if there is problem,we'll revise it.about renew the keys,please wait for the next FW version(coming soon),unlock at that time.Any problem please let me know. t

My friend the key is not ok, The key was killed by vvdi key tool, before renew the key had 433mhz, now aftter "renew" the key doesn't send any frequency, tell me if the key isnt sending frequency, how is it going to be programmed to car?

[leandroks]

Hi m8 those remotes there is no need to renew, it programs how many times u want no need to renew.

[eagleone-two]

Then use the ~~~~in HB mate ... :banghead:

Handy Baby is not mine.


Wysłane z iPhone za pomocą Tapatalk

[eliaselias]

t

My friend the key is not ok, The key was killed by vvdi key tool, before renew the key had 433mhz, now aftter "renew" the key doesn't send any frequency, tell me if the key isnt sending frequency, how is it going to be programmed to car?

if you have vvdi prog + adapter erase the date then renew with vvdi key tool
if it not work you should get the eerpm file and download it with vvdi prog

[louis21]

@viejomatius @antotechaustin Even though it shows success,but programming the key actually failed.Please wait one week for the new software. at that time program the key again.

[eagleone-two]

Today. Renault kangoo. Key tool
unfortunately one more bug.
I needed to copy TP. Key tool did not recognize properly and did not copy. Tango and HB without problem.https://uploads.tapatalk-cdn.com/20170814/fbcb0977fa17a4d4c0b4717bc1dc098e.jpghttps://uploads.tapatalk-cdn.com/20170814/940211587194a6187cef9d5f2f1538d2.jpghttps://uploads.tapatalk-cdn.com/20170814/003611cc1e436e6fb6bcd25c34ad418d.jpghttps://uploads.tapatalk-cdn.com/20170814/102ec86007bbbbb6a2f4f4f459df701a.jpghttps://uploads.tapatalk-cdn.com/20170814/0a61e5e1c044db7b2ada074c39c5e01c.jpg

[louis21]

This identification problem,we have revised,please check in next version,soon release.thank you!If any problem please feel free to contact with us

[obeids]

Does anybody have keytool and updated to latest software?
WHich remotes can it unlock now?

[eagleone-two]

Hi Support,
Where is problem? FW or HW?
868MHz not recognize. Please see on movie.
https://youtu.be/3fTXacI-fNA

[louis21]

Not support,because of the base station disturb.If the remote's signal is strong enough,maybe can be recognized.

[eagleone-two]

Thanks for reply. What "base station" ?

I have two friends with the same problem.

[viejomatius]

Hello, new bug detected, It won't generate well the remote for kia sportage sl, tried by all the kia spotage's options, but none of them programmed in the car, solved by programming chinese kia key...

[viejomatius]

Hi Support,
Where is problem? FW or HW?
868MHz not recognize. Please see on movie.
https://youtu.be/3fTXacI-fNA

this same problem testing ford smart key, definetly vvdi key tool wont detect 868 mhz...

[dorofteius]

Mate, 2 weeks. not 1 .
Are you going to release that firmware ?
Should I buy from solitaire ?
Just asking.

[lalaina74]

Hi Support,
Where is problem? FW or HW?
868MHz not recognize. Please see on movie.
https://youtu.be/3fTXacI-fNAI have the same issue too. I'm really happy with the frequency détection of the vvdi2, that's the reason why that I buy the key tool. Want to have the same performance with a portable tool ...but..no luck. The sensibility of the RF detector is not good, specially at 868 Mhz

Envoyé de mon HUAWEI TIT-AL00 en utilisant Tapatalk

[leandroks]

I ve tried to clone peugeot 307 remote 434mhz, it goes ok for all procedure and clone the remote, but when trying on the car it works one time a than even the original remote stops. I need to switch ignition on with original remote many times to it starts to works again, but the clone dont works anymore, same happened to clio 2 remote.
Any idea??
Thanks..

[fixanycar]

Does it renew 2012 Kia key?

Sent from my XT1650 using Tapatalk

[louis21]

@eagleone-two Phone signal frequency is about 868MHz,we are surrounded by this frequency,so when you test the 868MHz remote frequency,its frequency is too weak,can't be test out.not the key tool problem,just because of our surroundings.
@viejomatius what's your key tool serial number?when you generate the sportage,can generate successfully?what's the situation of the remote?have frequency? "solved by programming chinese kia key",where did you generate that?
@dorofteius Dear dorofteius,please wait some more time,we should make sure the software works well.
@leandroks Peugeot 307,it's electrical,no use to clone the key(just have the chip no remote).you should generate the remote,then match it in the car.all things will be OK.
@fixanycar Please refer to the VVDI KEY TOOL RENEW DIAGRAM(PDF file)

[eliaselias]

Mate, 2 weeks. not 1 .
Are you going to release that firmware ?
Should I buy from solitaire ?
Just asking.


clean your inbox

[fixanycar]

@eagleone-two Phone signal frequency is about 868MHz,we are surrounded by this frequency,so when you test the 868MHz remote frequency,its frequency is too weak,can't be test out.not the key tool problem,just because of our surroundings.
@viejomatius what's your key tool serial number?when you generate the sportage,can generate successfully?what's the situation of the remote?have frequency? "solved by programming chinese kia key",where did you generate that?
@dorofteius Dear dorofteius,please wait some more time,we should make sure the software works well.
@leandroks Peugeot 307,it's electrical,no use to clone the key(just have the chip no remote).you should generate the remote,then match it in the car.all things will be OK.
@fixanycar Please refer to the VVDI KEY TOOL RENEW DIAGRAM(PDF file)I know it's there, but people complain a lot of some functionality is not working


Sent from my XT1650 using Tapatalk

[leandroks]

@eagleone-two Phone signal frequency is about 868MHz,we are surrounded by this frequency,so when you test the 868MHz remote frequency,its frequency is too weak,can't be test out.not the key tool problem,just because of our surroundings.
@viejomatius what's your key tool serial number?when you generate the sportage,can generate successfully?what's the situation of the remote?have frequency? "solved by programming chinese kia key",where did you generate that?
@dorofteius Dear dorofteius,please wait some more time,we should make sure the software works well.
@leandroks Peugeot 307,it's electrical,no use to clone the key(just have the chip no remote).you should generate the remote,then match it in the car.all things will be OK.
@fixanycar Please refer to the VVDI KEY TOOL RENEW DIAGRAM(PDF file)
thanks for replying m8, but no matter what remote model i try to clone it never works, even old ford, gm or vag, generating and progrmming on the car ok, but never succeed on clonning option.....

[eagleone-two]

Thanks for explain Louis but without phone problem is the same.

[ph0en1x]

I try to clone 7936 from clio2 and 307 but is stuck on sniff data from coil. Any angle don't work and many times I try... Is anyone have same problem?

[truedetective]

thanks for replying m8, but no matter what remote model i try to clone it never works, even old ford, gm or vag, generating and progrmming on the car ok, but never succeed on clonning option.....

I believe the remote cloning is more for garage doors and the like - not car key remote controls.


I try to clone 7936 from clio2 and 307 but is stuck on sniff data from coil. Any angle don't work and many times I try... Is anyone have same problem?
I've had nothing but successes (including PSA cars). Not doing you're wont be though, nothing too whacky but putting the antenna near the the car's coil - pressing ok then inserting the key and turning it. I've noticed some cars need the key to be out for a little while before they will recheck the key.

[leandroks]

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/quote_icon.png Originally Posted by Truedetective
http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/buttons/viewpost-right.png (http://www.digital-kaos.co.uk/forums/showthread.php?p=3094006#post3094006)I believe the remote cloning is more for garage doors and the like - not car key remote controls.

I am inclined to agree with u. thanks for replying;.;;

BR

Leo

[louis21]

@fixanycar have revised in next version
@leandroks the remote clone,can copy the HCS/fix code cars.the cars you said ford,GM,vag,they are not!so can't copy.

[leandroks]

@fixanycar have revised in next version
@leandroks the remote clone,can copy the HCS/fix code cars.the cars you said ford,GM,vag,they are not!so can't copy.
Thanksd m8, i ve seen a video on youtue where a guy succeeded on cloning renault sandero pcf7936, remote, so i thought it was possible. i tried many times and ways with no success.
BR

Leo

[viejomatius]

@viejomatius what's your key tool serial number?when you generate the sportage,can generate successfully?what's the situation of the remote?have frequency? "solved by programming chinese kia key",where did you generate that?

my serial number is: vk01731261 , the remote is generated sucessfull and gives me 433mhz, but wont program on the the car, tried under all sportages but none of the programmed, the chinese key that solved wasn't generated, was bought a key designed for kia kind of original

[dorofteius]

I ve tried to clone peugeot 307 remote 434mhz, it goes ok for all procedure and clone the remote, but when trying on the car it works one time a than even the original remote stops. I need to switch ignition on with original remote many times to it starts to works again, but the clone dont works anymore, same happened to clio 2 remote.
Any idea??
Thanks..

Same thing here. It work's one time, afther that, it is all dark .
It does the same thing on Peugeot 207 and 407 ( 2006), 2x Dacia Logan (2009 and 2007), Golf 5 plus ( 2006), vw sharan ( 2002 ) Suzuky grand Vitara (2007) , megane 2001 ( rf one ) .
It work's one time, then not even the original remote does not work. Always reading AA AA AA AA AA ...
You have to resync .
On peugeot 508 and 2008 , A4 2011, it does not even know what it is about .
Anithyng that has pcf 7941 - 7961, does not work for renew. I had no intrest for the others. Just Peugeot and Opel.
I can make youtube moovies !
Basically, almost nothing work's .

[borjapoo]

i have problem with remotes, i bought remotes in aliexpress for vvdi with and without transponder, but this not work, burning its ok but after led off and no frequency, only work if i clone the original remote in a vvdi key with remote clone function, but remotes that came with the tool works fine... whats happend??

i have 2 vvdi key tool im my 2 stores one me-eng other eu-eng with the 2 devices the same..

[leandroks]

i have problem with remotes, i bought remotes in aliexpress for vvdi with and without transponder, but this not work, burning its ok but after led off and no frequency, only work if i clone the original remote in a vvdi key with remote clone function, but remotes that came with the tool works fine... whats happend??

i have 2 vvdi key tool im my 2 stores one me-eng other eu-eng with the 2 devices the same..


Mine was the same, i ve updated it and solved the problem of no light and no frequency, but clonning it sure not working.

[fabi]

Mine was the same, remotes not work with VVDI Key Tool only work with VVDI2 tool. Remotes from VVDI Key Tool box not work with VVDI2 tool.

[louis21]

You bought the chinese remotes,but your key tool is overseas version,so after generating there is no light no frequency,you can use these chinese remotes in next key tool version. You'd better buying the corresponding area remotes next time.

[fabi]

Today I updated key tool to 2.0.6 version. After prepare remote I have message "Remote hardware version is too low".

[borjapoo]

Nobody told us anything that there are different keys by regions, there is a lack of information of the machine incredible, the points that are gained with the remote controls, so that they serve?

[Maartinj]

Nobody told us anything that there are different keys by regions, there is a lack of information of the machine incredible, the points that are gained with the remote controls, so that they serve?
points can be replace to MB tokens and COPy 48 in VVDi (future plan)

[paul_12345]

anyone got the Corsa D and Astra H eprom dumps they can post here?

[dorofteius]

:applause: .The best solution that I ever seen on remote renew function .
Just remove the one's that are not working and that's it. Perfect tool .

:applause:

[RIMKACHIP]

:applause: .The best solution that I ever seen on remote renew function .
Just remove the one's that are not working and that's it. Perfect tool .

:applause:

Ironic ?


Envoyé de mon iPhone en utilisant Tapatalk

[nickolasd]

what kind of blades do you use with xhorse remotes, description of remote says: install proper blade for your application, so i assume the are should be many different styles of blades.

[RIMKACHIP]

@ Louis21

Hi sk203-b is same at sk-203-b1 ? Because seller propose me only b1 ? I am in France it's ok or not ? Thanks


Envoyé de mon iPhone en utilisant Tapatalk

[louis21]

@fabi where did you buy the remotes?what's the date of the remotes
@dorofteius what's your key tool version？eu?which option is deleted?I'll check for you
@RIMKACHIP check your pm,answered you.

[dorofteius]

It is eu version. Update to v2.0.6, and no more psa key's at all, and opel just a few.
everithyng that has pcf7941 dissapeared .

[Basti13]

Where i can download latest diagram v2.0 ???

4.remote renew(*refer to latest diagram V2.0 version*)+add renew GreatWall H2 smart key
+add renew Mazda Atenza CX-5 smart key
+add renew Hyundai SVI_MDFGE03 smart key
+add renew Hyundai MP13L_12 smart key
+add renew Buick A2C53360923 remote
+add renew Nissan-CWTWB1U825 smart key
*fix Nissan Hitag3/AES renew failed problem
*fix Chrysler cannot renew problem
*fix parts of key renew unstable problem

[Maartinj]

Where i can download latest diagram v2.0 ???


this week will be ready

[fabi]

@fabi where did you buy the remotes?what's the date of the remotes


Remote type passat B5, signed date 16-9-27, work with VVDI2, not work with key tool, buy on http://vvdishop.com/ with vvdi2 programmer
Remote tybe DS wireles, signed date 2016.12.21, work with VVDI2, not work with key tool, buy on http://www.cardiagtool.co.uk/
Remote type Audi A6L, signed date 2017.02.15, work with VVDI2, not work with key tool, buy on http://www.cardiagtool.co.uk/
Remote type passat B5, signed date E2017.06.20, not work with VVDI2, work with key tool, buy on http://xhorsepolska.pl/ with key tool

[eliaselias]

Jeep wrangler 2007 key renew not ok
on the tool it say renew success but transponder still locled and the key do not send anymore frequency after trying to new
so fix this bug
fxx id :
OHT692713AA

[louis21]

@fabi you bought the wrong area remotes.as I said in former post
@eliaselias your software is v2.0.6?which key?

[Maartinj]

KeyTool (https://mega.nz/#!cFNCDAAB!oEA2L3QFyRjhNtqno0gPFHxU3KSdgUAJFoXhjSV wmCs)V2.0 ENG Diagrams (https://mega.nz/#!cFNCDAAB!oEA2L3QFyRjhNtqno0gPFHxU3KSdgUAJFoXhjSV wmCs)

[gokart]

Today I updated key tool to 2.0.6 version. After prepare remote I have message "Remote hardware version is too low".

I have the same fault message with wireless remote 2017.06.30 using FW v2.0.6.

[kleidaras]

Me to with ds style remote

Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk

[eliaselias]

@fabi you bought the wrong area remotes.as I said in former post
@eliaselias your software is v2.0.6?which key?

my last version was v2.0.3
now i have update to 2.0.6
i try again jeep key again fcc ID : OHT6927133 key now become unlocked... but no more frequency
i have try on same key to renew but with menu OHT692427AA. after renew frequency come back to life...
please fix bug for frequency work for the fcc id OHT6927133

i have also test to renew IYC-C01C JEEP. CHIP:567.738.031 the renew complete till 56% then i get this message PROGRAM FLASH ERROR ... frequency still working and key become unlocked

can you add renew for Mitsubishi smart key with 315MHZ
there is G8D-644M-KEY-434MHZ available on the tool but we also need with 315MHZ

[RIMKACHIP]

KeyTool (https://mega.nz/#!cFNCDAAB!oEA2L3QFyRjhNtqno0gPFHxU3KSdgUAJFoXhjSV wmCs)V2.0 ENG Diagrams (https://mega.nz/#!cFNCDAAB!oEA2L3QFyRjhNtqno0gPFHxU3KSdgUAJFoXhjSV wmCs)




PSA and Opel has disappeared ???


Envoyé de mon iPhone en utilisant Tapatalk

[dorofteius]

Yes mate. It is just a scam tool. As always.
Always selling something that does not exist.
Stupid me for the purchase .

Just like dsg option in vvdi2 !
Just lyes . Nothing real.

[RIMKACHIP]

Yes mate. It is just a scam tool. As always.
Always selling something that does not exist.
Stupid me for the purchase .

Just like dsg option in vvdi2 !
Just lyes . Nothing real.

At the same time for 250 € should not expect a miracle !! [emoji23][emoji23]

I hope there will be evolution and no lies. Because from 4 months many software are equivalent of mk3 ( kst of diagcar.eu carprotool ) but price is not same.


Envoyé de mon iPhone en utilisant Tapatalk

[phanminhnhat]

Vvdi key tool remotes are different with various area but they're not marked. :dontknow:
I have vvdi key tool SE (Southeast Asia) version 2.0.2, i try to generate remote with a chinese remote => no light + no frequency. But clone function is ok.
I update to 2.0.6 => Chinese remote is not work at all => Error Infomation: "Chinese version of remote cant use the current data"

[kleidaras]

Vvdi key tool remotes are different with various area but they're not marked. :dontknow:
I have vvdi key tool SE (Southeast Asia) version 2.0.2, i try to generate remote with a chinese remote => no light + no frequency. But clone function is ok.
I update to 2.0.6 => Chinese remote is not work at all => Error Infomation: "Chinese version of remote cant use the current data"

If not fix this problem with different remote for me is not any good reason i use xhorse remote. I continue use my kd. All this search for correct remote is waste of time

[gokart]

If not fix this problem with different remote for me is not any good reason i use xhorse remote. I continue use my kd. All this search for correct remote is waste of time

I agree with you.

[louis21]

@eliaselias please take pcb pictures of the OHT6927133 key;
"i have also test to renew IYC-C01C JEEP. CHIP:567.738.031 the renew complete till 56% then i get this message PROGRAM FLASH ERROR ... frequency still working and key become unlocked",some version of this key doesn't support flash refresh,but it actually renew successfully,just shows error,will revise.
@dorofteius we found many psa keys can't be renewed(special algorithm),we are woking on it,what keys do you want to add back?

[mehmet becker]

hi anyone know when these come out ?
i pre ordered mine like 3 months ago stil nothing yet !
i orederd from the immerates if i speld it right

thanks mehmet

[Master01]

Please add Subaru 9F key reset to VVDI Key Tool.

[PremierD]

Samic is having trouble posting ..this

Recently customers feedback to us about VVDI KEY TOOL remote programming problem,customer can refer to following information
1.Please update to latest firmware version 2.0.6 first [update software version 2.3.9](all different version released except India version)
2.When programming remote get prompt'Remote hardware version is too low'means your remotes must be Chinese version.chinese version remote only support in Chinese version device,cannot support other version devices
3.All English version remotes can use for all overseas device(except India(in)/Malaysia(ma)/China(ch) version),such as Europe(eu)/NorthAmerican(na) they can use same version remotes
4.Chinese reseller only can sell chinese version devices/remotes,they cannot provide any other versions devices/remotes.(don't buy from chinese reseller)

[gokart]

I generated 8P0 837 220D with key tool and it didn't work on car. I had to use a remote from another company.

[louis21]

we are checking it,when there is result,I'll let you know,thank you!:)

[eliaselias]

@eliaselias please take pcb pictures of the OHT6927133 key;
"i have also test to renew IYC-C01C JEEP. CHIP:567.738.031 the renew complete till 56% then i get this message PROGRAM FLASH ERROR ... frequency still working and key become unlocked",some version of this key doesn't support flash refresh,but it actually renew successfully,just shows error,will revise.
@dorofteius we found many psa keys can't be renewed(special algorithm),we are woking on it,what keys do you want to add back?


here is the board for OHT6927133 same as picture... after renew key still unlocked and no more frequency
471708

[Fernandowap]

Good afternoon to all the forum friends.


I am a new owner of vvdi key tool.


Can I use handy baby's transponder?


Thank you

[kleidaras]

i use LKP02 for 4D 4C and CN3 for id46.

[RIMKACHIP]

If anyone had test renew Renault keys ? Diagram 2.0 includes new resistor of 1K ohm for renew ? Thanks


Envoyé de mon iPhone en utilisant Tapatalk

[yugo45]

Remote type Audi A6L, signed date 2017.02.15, work with VVDI2, not work with key tool, buy on http://www.cardiagtool.co.uk/


Can you explain how to do this A6L keys and in what cars it can be user for ?
I also ask here :
http://www.digital-kaos.co.uk/forums/showthread.php/615025-AUDI-A6L-X-Hores-keys-and-VVDI2

[newone]

Can you explain how to do this A6L keys and in what cars it can be user for ?
I also ask here :
http://www.digital-kaos.co.uk/forums/showthread.php/615025-AUDI-A6L-X-Hores-keys-and-VVDI2
those are like keydiy,they can do keys with separate transponder,about the coverage i think it will be similar with keydiy

[louis21]

@RIMKACHIP yes,it works well,last week someone did it.at first he did it by the former 1.0.2 diagram,failed.then he followed the 2.0digram connection(add a 1k resistor),it works!all are good.
@yugo45 this remote is the same as the wire remotes.

[eliaselias]

@RIMKACHIP yes,it works well,last week someone did it.at first he did it by the former 1.0.2 diagram,failed.then he followed the 2.0digram connection(add a 1k resistor),it works!all are good.
@yugo45 this remote is the same as the wire remotes.

DEAR louis21... please add this model
mitsubishi outlander smart keyless
FCC ID: OUC644M frequency : 315MHZ

472200

[hipolitogt]

Today tried to clone ID83 FORD (online calculation) and doesn't work, tells server error in calculation. Tried 5 times and no success.

Enviado desde mi SM-G955F mediante Tapatalk

[shilow1989]

ermm so it mean china version remote cant use other version right? is there any way to crack it? i buy quite a few remote from china .. cause it never state there is other version ... example kd got600 and 900... if not all those remote i bought from china become useless

[louis21]

@eliaselias OK,I'll come up with this to the R&D
@hipolitogt what's the car?

[hipolitogt]

@eliaselias OK,I'll come up with this to the R&D
@hipolitogt what's the car?@louis21 Ford Fiesta MY2014 diesel, without proximity key. Tried several times.

Enviado desde mi SM-G955F mediante Tapatalk

[kleidaras]

Also i can't clone I'd 63 80bit. I have message failed 125

Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk

[lush29]

Receveid mine today. Tools looks nice and friendly use hope will do the job.i will try an nissan micra 2006 today


Sent from my iPhone using Tapatalk

[louis21]

ID83Ford online calculation can do focus and kuga,a part of the other type

[viejomatius]

sorry a mistake

[truedetective]

The "comfort function" (long press to roll down windows) on VW Golf remote does not work for the vvdi key tool generated remote.

[giovani]

Hi.

I WOULD LIKE TO KNOW IF I CAN PROGRAM WITH VVDI TOOL Remote Key Tool Xhorse Key Programmer ENGLISH VERSION THIS KEY REMOTE?

https://pt.aliexpress.com/item/5pcs-Lot-XHORSE-Universal-Remote-Key-3-Buttons-VVDI-Key-DS-For-Audi-A6L-Q7-Type/32813276969.html

Regards.


https://ae01.alicdn.com/kf/HTB1wA5pRpXXXXXyaXXXq6xXFXXXb/5-p-s-lote-XHORSE-Remoto-Universal-Chave-3-Bot-es-Chave-VVDI-DS-para-Audi.jpg_640x640.jpg

[mkopytekchi89]

need 2 pin codes for 2 dodge avengers.

1B3BD1FB2BN523894


1C3CDZAB2CN132436

you can private msg me. Thank You in advance for the pin codes.

[RIMKACHIP]

@RIMKACHIP yes,it works well,last week someone did it.at first he did it by the former 1.0.2 diagram,failed.then he followed the 2.0digram connection(add a 1k resistor),it works!all are good.
@yugo45 this remote is the same as the wire remotes.

I had test unlock success !! but no RF signal ????? when i touch button no RF !!! If you can do something because renew with no remote is not a renew !! Thanks


Envoyé de mon iPhone en utilisant Tapatalk

[lush29]

Bmw e 60,e90 remote frequency not working -(.


Sent from my iPhone using Tapatalk

[RIMKACHIP]

Bmw e 60,e90 remote frequency not working -(.


Sent from my iPhone using Tapatalk

Id46 unlocked and no remote ?


Envoyé de mon iPhone en utilisant Tapatalk

[Fernandowap]

Good afternoon


I used vvdi key, to make the dedication of a transponder PCF7936, for Mitsubishi ASX 2012. and I run 100%, programming done with fvdi.

[louis21]

@RIMKACHIP please send me your wiring connection picture(PCB)
@lush29 please give more details

[RIMKACHIP]

@RIMKACHIP please send me your wiring connection picture(PCB)
@lush29 please give more details

https://uploads.tapatalk-cdn.com/20170911/4e8df24c03acdc4cb4fa5a8e4629ed4c.jpg

https://uploads.tapatalk-cdn.com/20170911/5b77b7e7074e307a4d838ea47dabedbc.jpg


Envoyé de mon iPhone en utilisant Tapatalk

[philipcoin]

I had test unlock success !! but no RF signal ????? when i touch button no RF !!! If you can do something because renew with no remote is not a renew !! Thanks


Envoyé de mon iPhone en utilisant Tapatalk

what version of vvdi key tool did you use

[RIMKACHIP]

what version of vvdi key tool did you use

2.0.6


Envoyé de mon iPhone en utilisant Tapatalk

[lush29]

@RIMKACHIP please send me your wiring connection picture(PCB)
@lush29 please give more details

https://uploads.tapatalk-cdn.com/20170911/025e45c72ddb43e914167f60b0d5712e.jpg. Tell me what more details you need and i send you. Thx



Sent from my iPhone using Tapatalk

[lush29]

Is the Tpx transporder needs to be bought from vvdi shop or any will do? Had micra for cloning and calculated all perfect but when put the tpx 4 transporder failed to clone. Thanks


Sent from my iPhone using Tapatalk

[fvdigigital]

key tool not reed frequency bmw smart key !!:tears_of_joy:

[RIMKACHIP]

key tool not reed frequency bmw smart key !!:tears_of_joy:

With handy baby same problem with 868mhz rf key not recognized!



Envoyé de mon iPhone en utilisant Tapatalk

[lush29]

Is the Tpx transporder needs to be bought from vvdi shop or any will do? Had micra for cloning and calculated all perfect but when put the tpx 4 transporder failed to clone. Thanks


Sent from my iPhone using Tapatalk

Anyone please? Manage to copy 2006 nissan micra key? What transporder you use. Thanks


Sent from my iPhone using Tapatalk

[RIMKACHIP]

Anyone please? Manage to copy 2006 nissan micra key? What transporder you use. Thanks


Sent from my iPhone using Tapatalk

Id46 ? Tpx3 normally


Envoyé de mon iPhone en utilisant Tapatalk

[lush29]

Id46 ? Tpx3 normally


Envoyé de mon iPhone en utilisant Tapatalk

Thanks m8 did you manage to copy one so far?


Sent from my iPhone using Tapatalk

[giovani]

@RIMKACHIP please send me your wiring connection picture(PCB)
@lush29 please give more details


Hi.louis21


I asked for help with same subject in post # 456.

You can explain better about the incompatibility of the VVDI KEY TOOL english version with chinese version.
I have English version where I buy remote control right for this version and how can I identify remote control for this version.



regards.

[RIMKACHIP]

Thanks m8 did you manage to copy one so far?


Sent from my iPhone using Tapatalk

No sorry i didn't do this because I don't have tpx3 I have only jmd6 for handy baby.
But with vvdi key tool when you want to clone id46 message is : " use wireless key or tpx3"


Envoyé de mon iPhone en utilisant Tapatalk

[lush29]

No sorry i didn't do this because I don't have tpx3 I have only jmd6 for handy baby.
But with vvdi key tool when you want to clone id46 message is : " use wireless key or tpx3"


Envoyé de mon iPhone en utilisant Tapatalk

Yes thats what is saying. That means just put the tpx in the keytool thats right? I put there and then is says write fail.


Sent from my iPhone using Tapatalk

[kleidaras]

Use cn3 my friend

Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk

[eliaselias]

Subaru outback 2010 with transponder 4D60. Clone ok. I have use 4D vvdi transponder

[RIMKACHIP]

@RIMKACHIP please send me your wiring connection picture(PCB)
@lush29 please give more details

I have re-renew renault cards and now frequency rework !!! Very very surprising !
need renew 2 times for working good [emoji4]


Envoyé de mon iPhone en utilisant Tapatalk

[clintezra]

Yes use the cn series chips..
4d 4c and id46 all clone well with these chips.

When sniffing for date I get more luck
Using the top left of my key tool
Then the top right where the antenna looking piece is!
Strange!

Also did a seat Ibiza remote 4th immo
Made the remotes and the buttons were wrong


Boot was unlock and th unlock was alarm!

Had to go back to my kd900 for this one!

[louis21]

@lush29 868MHz BMW?the key tool can't test out the 868MHz frequency
@giovani please check the usage area of the remote,you should confirm with the sale.if there is still doubt with you,please PM me.
@clintezra what version is your key tool?eu/me or? and please let me see your option choosed to generate seat Ibiza.which remote is used to generate?

[CarCity]

Hi all friends
Please I need eeprom and flash file for this CGW
All data is lost https://uploads.tapatalk-cdn.com/20170914/d63d496b558044121d75fac460fd39ee.jpg
Regards

[BRMTDI]

I am trying to Clone BMW ID44, PCF7935, is this possible or will it be possible soon?

I get read error when trying to identify ID44, Chip...maybe bug?

I updated to latest firmware, not sure if anything else I need to do maybe.

[p1et]

I am trying to Clone BMW ID44, PCF7935, is this possible or will it be possible soon?


Not possible with any tool.

[BRMTDI]

Not possible with any tool.

That would be amazing to be able to do, but at least I know it is not possible.....

Other Issue I am in the Middle of....I purchased

AUDI Q7 S8 KEY REPLACEMENT REMOTE FOB KR55WK45032 OEM TRANSMITTER 4E0 837 220 ELink, seller mentioned key is refurbished, chips renewed or replaced etc...this is for Audi A8 D3 Car, so I get the key and it is locked......

I took apart key and I noticed it has PCF7943,Key is Keyless Go.... I purchased some chips from ebay http://www.ebay.com/itm/5PCS-PCF7943AT-417-Encapsulation-SOP-16/131383945809?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 (http://www.ebay.com/itm/5PCS-PCF7943AT-417-Encapsulation-SOP-16/131383945809?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649)

Is it possible just to replace chip and key is new again ready to work, or do I have to wait until VVDI has solution to renew this key? Porsche Also used this same key, and Also VW Tourag, Kessey Module is Siemens 93C86.

If anyone has any experience with, unlocking these keys or matching locked keys, I would def appreciate it.... VVDI shows key is locked....so I think that is my main issue.

[eliaselias]

please fix this bug
i have try to unklock LAND ROVER YWX000071(315mHZ)Visteonafter renew the frequency have been changed to 434mhz

i tried the option YWX000061(434mHZ)Visteon to see if it was opposite it also give 434mhz

my key is 315mhz... pleas fix the bug because after renew its became 434mhz... maybe you have put same two file but with different name

[louis21]

:)one possibility:your key inherent frequency it's 434mhz,renew doesn't change the frequency.

[ttzag]

Hi all friends
Please I need eeprom and flash file for this CGW
All data is lost https://uploads.tapatalk-cdn.com/20170914/d63d496b558044121d75fac460fd39ee.jpg
Regards

if you still need it

[fixanycar]

I tried Hyundai proximity key, it unlocked but no frequency.
What a tool.... Any update soon to fix many problems?

Sent from my XT1650 using Tapatalk

[RIMKACHIP]

I tried Hyundai proximity key, it unlocked but no frequency.
What a tool.... Any update soon to fix many problems?

Sent from my XT1650 using Tapatalk

Try renew 2 times


Envoyé de mon iPhone en utilisant Tapatalk

[eliaselias]

I tried Hyundai proximity key, it unlocked but no frequency.
What a tool.... Any update soon to fix many problems?

Sent from my XT1650 using Tapatalk


I have renew hyundai smart key without any problem
and frequency still work475220

[eliaselias]

:)one possibility:your key inherent frequency it's 434mhz,renew doesn't change the frequency.

you are wright. It was custommer fault. And key was 434mhz

[eliaselias]

Toyota smart key i have use special function to unlock it. I have got unlocked ok but the led light did not blink 3 time in the smart key .
i have try with cn900 and the light blinked 3 time after the unlock

[louis21]

@fixanycar please make sure you are refering the v2.0 wiring diagram.and tried twice as RIMKACHIP advised?what's the result?
@eliaselias please take both side PCB photo of your key,let have a look

[Basti13]

Hello louis21 in futher any updates with renew key fobs (7941) ??

[obeids]

I bought a whole lot of Remote keys for the VVDi 2 and now we tried using them with the VVDI KEY TOOL to generate a remote and it says REMOTE HARDWARE VERSION OUTDATED.
SO why can these remotes not work with the VVDI Key tool?

BTW I tried the AUDI 8P0 (Audi A3) remote on VVDI2 and it generates but the car does not recognise. I generated the same model using KEYDIY and their remote and it worked on the car. Please fix this bug....

[kleidaras]

Unfortunately is wrong region. You can't use remote you bay from China seller on Europe machine

Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk

[louis21]

@Basti13 In detailed what's key?
@obeids 1.open the remote case,take a photo of the PCB,big possibility that is chinese version remote.
2. which option?

[kreepyme]

...TO VVDI Co...

I have a XC-Mini a MB BGA tool and a VVDI 2 "full" and I am thinking in buying VVDI Key Tool... but after reading all this info I have doubts.
I am a little bit disappointed in XC-Mini and VVDI 2 and technical support is rubbish ... poor english, answering a question with another, playing stupid, not answering...

BTW....Can you write down a few european dealers for remotes ??? Can you release a complete user manual with troubleshooting for your products???
Can you put together a proper website with all manuals, downloads and details of your tools and so on???

[MaxMin]

I agry with kreepyme,i have also xc mini,vvdi2,mbvvdi, but for now i stop to buy any product from xhorse,too much bugs,support bad,who is louis21 ?? Little girl? Why Samic stop to answer in forum? He finish job for marketing xhorse product and now put little girl for support, with stupping answer,post good resulucion picture etc etc ...
yugo45 never get answer for one question in several thread!
immo tool never solved milions bugs,remote section again in china language!
support tell not yet ready for register area. Samic tell,ask support for register area.
very unfer game from xhorse!

[PremierD]

Lets leave the personal attacks out of it please