EWS 3 2D47J ERASED, REWARD, URGENT

[labusas]

Hi, Sirs
I have EWS3 2D47J erased.
Can you help with the file to write?
and steps after?
Thanks very much, let me know if I can pay you back
BMW 61.35-8 371 940
608 377 UTA
HW 01 SW 03

1997 7 Series 740
VIN WBAGJ8329VDM08324

DME 261 203 474....1429 884

[bearheroes]

You know isn from ecu? You won't be able to use ori keys


Sent from my iPhone using Tapatalk

[lupu_sandu]

Easy task mate. Put a EWS dump, make a new PCF key, read and post here ECU dump, sync with EWS. Done.
30 minutes job

[labusas]

Don't know how and what to read in ECU for file? I have xprog

[labusas]

I can make new PCF with TAG key tool, no problem. Don't have ISN from DME

[lion0304]

Hi, Sirs
I have EWS3 2D47J erased.
Can you help with the file to write?
and steps after?
Thanks very much, let me know if I can pay you back
BMW 61.35-8 371 940
608 377 UTA
HW 01 SW 03

1997 7 Series 740
VIN WBAGJ8329VDM08324

DME 261 203 474....1429 884


You read 2D47J with Xprog K line adapter? That why MCU is erased.
Lupu said you all you need to make car start gain. (http://www.digital-kaos.co.uk/forums/member.php/288442-bearheroes)

[labusas]

This ecu has no eeprom. Some sugestion on what to read please

[mojomojo]

Do you have stand alone tag tool or with the commanders because under BMW commander you can realign ews with ecu if not... read ecu data through software to post here so someone can sync it. have you found replacement ews3 data to replace with form here? Ak90 is a very good tool for EWS. How did you erase?

[mojomojo]

This might be your DME
http://www.digital-kaos.co.uk/forums/showthread.php/527533-BMW-E36-motronic-m5-2-0261203667-pinout?highlight=740+Motronic+M5.2

[lupu_sandu]

Put inpa on car and see if you can read ISN from ECU.

[labusas]

Hi, all
I have bmw comander but it can't sucsessfully finish EWS DME allingment. I wrote bin from another EWS to it. But probably need something more specific in that file to allign properly with commander.
Do you have that ews file?
thanks for your help

[bram380]

read ecu flash & mcu ews post here both dump to sync off line.
or read dme with inpa, post picture page1 and page2.

[duplikeytor]

Is there a software that sync offline or use brain.exe?

[bram380]

Is there a software that sync offline or use brain.exe?

use brain.exe (hex editor) for EWS3 hw01 & hw02

[labusas]

Sirs, I've read some raw data of the DME.
Would it help to get data for a new EWS file?
I wrote bin that I have but doesn't help

[duplikeytor]

Hi Sir,

Can you please advise where the Sync information is ? Line Number and the length? This is good information for future reference.

Yaser

[bram380]

Sirs, I've read some raw data of the DME.
Would it help to get data for a new EWS file?
I wrote bin that I have but doesn't help

Bosch DME 0261.203.474
ISN: 0164

Write ISN to EWS to start the cars.
or resync dme-ews

[labusas]

Thank you Sir, ill get back to it soon. Should I erase all other key like keys to FF, just right Sync bytes? Or it doesn't matter as long as sync is correct?

[bram380]

no problem, you can change to FF rolling code for all key.

Sent from Malang-Indonesia

[labusas]

Dear Bram, Just in case I make mistake, whats the location in ews file to write ISN?

[labusas]

I know HW 04 location is ISN Location = 1EB-1EC
But is it same for HW01 SW 03?

[labusas]

wrote to ISNLocation = 1EB-1EC but AVDI can't do sync
Maybe it's a wrong location for early HW1.
Need dump please, does anyone have it?

[labusas]

Is it true that I also need this in addition to ISN or it won't work?:
GM, SA, VN, ISN with INPA.
-Edit EWS dump and fill in those data.
-Create a new key

[Siham]

use a litle but usefull soft named EWS editor you can get it on the web , it will make the job quickly for you my friend .

[labusas]

Thanks Siham
I'm so swamped at the moment to look for editor and enforcer, then try it many times.
I'm willing to pay someone to do the working file for me.
EWS3 HW01, SW03. 0D47J

ISN: 0164

KM 201313
VIN: WBAGJ8329VDM08324

Thanks

[dijo]

M8, have you any key-maker to program a new key (you need new PCF7935) from EWS data?
If not, then go to the next locksmith with one EWS dump, pay for a new working key (he will also change ISN) and write EWS data back, aligned with Ecu and job done...

[labusas]

M8, have you any key-maker to program a new key (you need new PCF7935) from EWS data?
If not, then go to the next locksmith with one EWS dump, pay for a new working key (he will also change ISN) and write EWS data back, aligned with Ecu and job done...
Yes, i am a locksmith.
I did hundreds of 0d46j with k line and new pcf transponders.
This is a first 47j mcu.
The new pcf transponder is not being accepted by EWS no matter what file I wrote to ews.
HW1 SW3, I DONT HAVE this one
anyone with that version and can edit ISN above?

[bearheroes]

Thanks Siham
I'm so swamped at the moment to look for editor and enforcer, then try it many times.
I'm willing to pay someone to do the working file for me.
EWS3 HW01, SW03. 0D47J

ISN: 0164

KM 201313
VIN: WBAGJ8329VDM08324

Thanks


before paying try and inform... :)

[labusas]

Bmw editor screen shot is attached.
I really need to make sure it's right, I have access to car short time tomorrow, can't experiment

Does it look right?
need to make new chip with tag key tool and EWS DME synchro. I'm using Launch X431 to do it.

[bram380]

EWS3 HW01 SW03 2D47J
BMW# 8374945

[labusas]

Thanks to all helped, Mainly Bram for ISN and file - this is solved.
1. wrote Bram dump, xprog original K line, 2D47j. Turn verify OFF
2. Make new PCF7935 with Tag key key#8 and didn't work
3. Make new PCF7935 with VVDI2 key #1 and it worked - Car stared cranking, KEY password = VALID
4. Synchronized EWS-DME with Autologic = car runs.

Have a great day! Love this forum.

[Fx323i]

Hi Labusas, what tool did you use to read the raw data? I ran into the same problem, the ECU is the same. I don't know where the problem was as I used AK90 like always and chose the correct MCU 2D47J. This AK90 did this 3 times in the last week, but from ME5.2 for M62 engine I am unable to pull the ISN with the tools I have to my knowledge.

[Fx323i]

Hi Bram380,
I found your posts in this topic.

I ran into the same situation like the original poster. I know how the system works. In my case the 2D47J got erased by AK90 accidentally and I am not sure what was the cause because I am 100% sure that I did not put +12V to it and I definitely chose the correct MCU from the list. This never happened before, but this month I erased 3 pcs 2D47J. The first two were an easy job, but with this one I have trouble.

Anyway, I know it is an EWS3.3 and the ISN for DME in INPA is not the correct one. I only have Galletto 1260 and Galletto v54, xProg, INPA (K+DCAN) and ISTA (ICOM), BMW Scanner 1.4. I can not find any way how to read full dump from the DME from which I would be able to identify the ISN. By my equipment I am able to pull 32kB maps, but I am not certain if the ISN is stored there.

Could you please tell me if with my equipment I am able to get the ISN?

I am willing to pay as the car is originally from Poland and I could see someone already programmed something in the EWS (there were marks of soldering) before. I also can order a new EWS, but I am not sure if the DME is the original one from the car and not a reprogrammed junkyard piece. In that case the new EWS would not work either. If it was EWS3.2, I would not have this problem at all.

I tried to send you a PM but the system did not allow me to.

Thank you very much for any help,
Martin

[yarickoff]

Thank you for info