Clone Ford Mustang 4.6L 2004 ECM need help

[soxten]

Hi all
I have a Ford Mustang 2004 with 4.6L
Ecu/Ecm is "Ford" EEC-V
Where is immo located?
I have some type of Eeprom on right side of pcb, "032FB PEDH"
And und bottom side i have some flash "N70005FWC002" "SL5TR"

I have a same used ecm/ecu as I need to
move immo to from broken.

Ned help ehat chip this is and where immo is.

https://uploads.tapatalk-cdn.com/20170115/979994ef8fbba222e53dd5c7607385ed.jpg

https://uploads.tapatalk-cdn.com/20170115/dcc01d239092e25853fdd8d36ac59a3b.jpg

https://uploads.tapatalk-cdn.com/20170115/3f9e62a83475c21a2015c398f1805b49.jpg




Skickat fr?n min iPhone med Tapatalk

[KCSS]

Hi,
try guys at www.moates.net (http://www.moates.net). (Support)
They have great experience with these ecus.
But i think immo will be in eprom 95040 (marked as ST77012 or ST77014). May will be on the lower side of the board.

[soxten]

Dont need more tools, need to know where immo is for clone this ecu.
I have tools for read Eeprom and flash.
Hope someone can help me with info what part I need to clone to get my used ecu to work.
I dont have car here so I need to fix all on bench


Skickat fr?n min iPhone med Tapatalk

[romecu]

search soic-8 IC marked as 77014NC = 95040

[ilian_cho]

Other side on PCB is located 77014

[soxten]

https://uploads.tapatalk-cdn.com/20170116/5c3a0d0d2839152757c7b6f2df3cd357.jpg

Cant find?


Skickat fr?n min iPhone med Tapatalk

[soxten]

Any ide? Need help on this one


Skickat fr?n min iPhone med Tapatalk

[vanos batam]

Try TMS...

[soxten]

I have try to read this as 27C010 and 27C512 but no info in reading.

Please need help


Skickat fr?n min iPhone med Tapatalk

[soxten]

I did change mcu and car starts!


Skickat fr?n min iPhone med Tapatalk

[Mohmed gubr]

sorey i have same bropleam and i cant locate mcu yo can helep
me

[m7md]

ITS ON FLASH NOT EEPROM (N70005FWCHCA) ITS 28F010

[soxten]

Change N7000... chip as under mcu and car starts!


Skickat från min iPhone med Tapatalk

[boxsport]

Change N7000... chip as under mcu and car starts!


Skickat från min iPhone med Tapatalk

Bump into this thread...
I´m trying to read a Ford ECU (kess identifies as a EEC-V ECU) to change the VIN (there was some issues with the Vin Block and someone tried to write VIN with HPTuners, now VIN is a "mess"...
I was able to read this with Kess but now i cant write. Alrady tried in car and in bench and same result.
Kess Error: "Change of Status Not Possible".
Can you tell me if i can read flash using any programmer like TL866Pro?
For what i see, it seems that flash is chip with ID: N70005FWC002 (seems to be same has yours).
How can i read this if i remove from PCB?

Thanks

[cartagena]

Hi Mate can you share how do you get to read this Flash N70005FWC002 if you have a pin out or data sheet, Cause I have also this type of flash in ford focus 2003 gas and I want read. I did not find the data sheet in the google. Please help

[backwoodsracing]

What are you using to read and flash with ?