BMW e46 Digiprog 3

[zix1]

Anybody knows how to correct milage?
Via OBD or LCM?

[gogocro]

dash ews on desk lcm some go by obd some not

[zix1]

Is there a difference of the result?
I mean which way do I choose?

[honingkoning]

Anybody knows how to correct milage?
Via OBD or LCM?

What year is your car and dash only will b Ok for this car.
But old milleage Will be traceable.

Wbr

[zix1]

Its 11/2004

Milage traceable is no deal because I changed the dash and only want to correct it to the milage.

So try over OBD or do I have to correct LCM also?

[memet99600]

Its 11/2004

Milage traceable is no deal because I changed the dash and only want to correct it to the milage.

So try over OBD or do I have to correct LCM also?

For the chip 35080 use programmer like R260 or R270+, for LCM you can use bmw scanner it's easy 1min

[zix1]

Im not sure which chip it has.
Do i have to program both, dash and lcm? Behause lcm has the right milage. Only dash is a new one.

I habe this cable for my digiprog
https://uploads.tapatalk-cdn.com/20170207/6350c15bec0229301996db7d259427b1.jpg

[honingkoning]

Its 11/2004

Milage traceable is no deal because I changed the dash and only want to correct it to the milage.

So try over OBD or do I have to correct LCM also?

If you change dash a red dot Will be Deen on the display (due to different vin in dash) for milleage you can remove eep and change with digi.
But for change vin you need programmer like upa/xprog/R270 etc.

Wbr

[memet99600]

If you change dash a red dot Will be Deen on the display (due to different vin in dash) for milleage you can remove eep and change with digi.
But for change vin you need programmer like upa/xprog/R270 etc.

Wbr

Or you can read, save, upload here and tell VIN and mileage. Someone can change for you. ANd after write in you new chip with digi .

[captain crackers]

The vin can be changed using a Digiprog. Arthur.

[zix1]

But to change vin via digiprog i need to desolder the Chip, right?

[zix1]

My e46 from 2004 doesnt have a port left from the engine. Thats weird. I only have an obd port inside the car.
Digiprog wants to have ST06. Thats the round cable.
do i have to choose e90 insted? Because of the odb Port.

[memet99600]

My e46 from 2004 doesnt have a port left from the engine. Thats weird. I only have an obd port inside the car.
Digiprog wants to have ST06. Thats the round cable.
do i have to choose e90 insted? Because of the odb Port.

You can't do it via OBD you need to modify chip in dash (kilometer and VIN)

[brend]

Anybody knows how to correct milage?
Via OBD or LCM?

Ews only manual adjustment .Obd not have sulution .

[zix1]

Chip in dash or lcm? Or both?

[nebojsapejcic]

Only year 2000 goes via obd and have round connector under the hood. 2001 and up you need to take out dash and do 35080.

[zix1]

Only dash or LCM to?

[adiagnostyka]

If you have new dasch and old lcm and ews then you need modify only dasch. You need open dasch and read eprom. I think pasoft 1,4 can modify vin in dach by obd but km must modify directly in chip.

[zix1]

I only have Digiprog 3.
also have a used LCM inside, because old one was broken

[sparkz02]

Well to start off with do, dash 35080 chip, DP3 will handle that chip fine, LCM you can do using obd after

[eagleone-two]

In this case for you is better to use x-prog. 3 in 1. Manual-pinout, km, vin.
10min. and done.


Wysłane z iPhone za pomocą Tapatalk

[zix1]

Never heard of xprog. Send me link pls

[eagleone-two]

http://www.eldb.eu/index.php?route=product/category&path=35


Wysłane z iPhone za pomocą Tapatalk

[zix1]

Cant i change vin over eeprom with Digiprog?!

[memet99600]

Cant i change vin over eeprom with Digiprog?!

Yes you can !

[zix1]

Im failing to find a hexa calculator where i can manually fill in the code

[captain crackers]

You need an ascii to hex calculator. As a clue 31 hex = 1 ascii, 32 hex = 2 ascii etc. Arthur.

[zix1]

Yeah im failing to find one where im able manually type in the code

[Alawigmx]

Ive only done E46's using Digimaster, just removing cluster and LCM, clearing/resetting LCM, then read/adjust mileage 35080 erase and then finally write. Works flawlessly, I mostly use Digiprog for OBD odometers in VAG cars.

[adiagnostyka]

lcm you can adjust with passoft 1,4 by obd.

[zix1]

Ive only done E46's using Digimaster, just removing cluster and LCM, clearing/resetting LCM, then read/adjust mileage 35080 erase and then finally write. Works flawlessly, I mostly use Digiprog for OBD odometers in VAG cars.

Everything possible with Digiprog to. Why using an extra tool.

[zix1]

But back to topic!
Digiprog manual says using ST51 for 2004 BMW LCM.
It has 1x brown, 1x white, 1x green, 1x yellow.

My delivered ST51 only has brown, white and 2 ihrer colors.

Any suggestions?

[clusters]

Yes, rewire it to correct colors

[zix1]

Clusters from cartech uk? :D
Helped me another time haha

[zix1]

Everything Right?

Brown=brown
Black=white
Red=yellow
orange=green

https://uploads.tapatalk-cdn.com/20170209/6fbef535cdee177591f919da6b78d320.jpg

[honingkoning]

Zix1 this topic with this 36 reactions and 1 Thanks (not by you).
You got so much info and help bad situation mate.

Wbr

[zix1]

LOL? I thanked Cluster instantly via button. Better check it before you say something like that.
Everything before was just discussing without any solution. Not to forget that most of the comments to ascii were wrong.
But hey, no problem mate.

Have a nice day.

[diagtech]

Lcm should go diag

[zix1]

I will try it saturday. Hope the wiring is right. I wasnt sure if cluster mean the front or the back side where the soldering is.
Because pin 13 on the upper right backside is not pin 13 on the upper right frontside but its bottom right.

[zix1]

Another question:
What is the difference between LCM with ST51 (HCS12), ST51 (HC12) and LCM with ST35 (HC11)

[zix1]

LCM Hc12 worked on Digiprog but dash still display old milage. Why?https://uploads.tapatalk-cdn.com/20170211/1ebf2a56ab49adb031d0e8c4da47571d.jpg

[vageric]

42 post and we still on post #1.
i think is best you let someone els do this for you.

[honingkoning]

42 post and we still on post #1.
i think is best you let someone els do this for you.

I think its better to ban this topic.

[zix1]

Yes, because except of clusters post, nothing else answers any questions. People are here to learn and discuss but some of you take it as an opportunity to hate.
Have a nice day.

[vageric]

Yes, because except of clusters post, nothing else answers any questions. People are here to learn and discuss but some of you take it as an opportunity to hate.
Have a nice day.

in this whole thread i see in different post repeatedly the right anwser.
but the only thing i read from you is OBD and LCM.
read the whole thread again and your will find your anwser.
and learing and have someone tell you in details how to do it is not the same.
otherwise read more post on DK and you will learn!

[honingkoning]

in this whole thread i see in different post repeatedly the right anwser.
but the only thing i read from you is OBD and LCM.
read the whole thread again and your will find your anwser.
and learing and have someone tell you in details how to do it is not the same.
otherwise read more post on DK and you will learn!

Maybe he needs a geckofilter So he can filter the right info from the thread [emoji1].

All info is there mate, and a lot more on DK.

1-0 for vageric.

[zix1]

Cash me outside, how bow dah?
Just kidding :D chill down guys

[Johnner]

:roflmao: Class !!

[Meat-Head]

:roflmao: Class !!

Think the clue to problem where somebody tweeted #M35080

so if its just a new dash / incorrection, just hope the ghost in the night swaps the eeprom over
just look up remiving needles if you have to