Opel CD70 and CID carpass

[bank]

Hi all!

I bought VDO Siemens CD70Navi (13188477, LQ) with Siemens CID (24461297, DB). It is coded. Seller says - do not know of any code.
OP-COM says it's paired. But it seems like DIS and EHU from different cars, because the message "Display Safe" appears after swith on.

Using EZP2010 and clip I read dump CD70 from 24c64 (https://www.dropbox.com/s/62q1rkjorvozz0n/cd70.zip?dl=0) and dump CID from 93c66 (https://www.dropbox.com/s/zzu1dgpbrzft3et/CID.zip?dl=0).
But, when I read dump from CID, every time it's different.

Is it possible to read dump from CID without de-soldering chip?
https://uploads.tapatalk-cdn.com/20170210/2c0150ea67c0729959c54ec185d1fb2a.jpg
Is it a correct chip for reading?


Can you help me?

UPD. After changing type of chip to AMTEL AT93C66 8bit I think received dump is correct
It's here (https://www.dropbox.com/s/cz2gl87vp2ezyq2/AMTEL%2093c66%208bit%20mode%20reading.zip?dl=0), CarPass 6487?

[drahe]

CID - 6847

[bank]

drahe, thnx. :)
And what about CD70?

2all: Who can help with making delivery state for these CD70 and CID dumps?

[shooting]

drahe, thnx. :)
And what about CD70?

2all: Who can help with making delivery state for these CD70 and CID dumps?

Need to read Lower eeprom from CD70

wbr



See pic:

[bank]

Need to read Lower eeprom from CD70

OK, I see. Got it (https://www.dropbox.com/s/jnflq8l9g1qs53n/cd70%20lower%2024c64%20eprom.zip?dl=0)!

[nikz]

code 2608.............

[shooting]

OK, I see. Got it (https://www.dropbox.com/s/jnflq8l9g1qs53n/cd70%20lower%2024c64%20eprom.zip?dl=0)!

Here you go, unregistered.. pair using 6847

wbr

[bank]

Here you go, unregistered.. pair using 6847

wbr

Thank you!
I'll try and say about result

[bank]

CID and CD70 was paired using 6847 successfully. :)
But ... after pairing EHU and DIS reboots and sound from CD and FM disappears :(
Unpair doesn't help. I hear "beeps" with display safe message, but sound from CD/Radio.
Navi works with sound.

Any ideas how to fix?

[shooting]

CID and CD70 was paired using 6847 successfully. :)
But ... after pairing EHU and DIS reboots and sound from CD and FM disappears :(
Unpair doesn't help. I hear "beeps" with display safe message, but sound from CD/Radio.
Navi works with sound.

Any ideas how to fix?

Looks like your screen is in Delivery Mode, you need to use OPCOM/TECH2 to set it to paired

wbr

SEE:
If you see "DISPLAY SAFE" flashing every 10 seconds, this means that the Display
is currently in Delivery Mode, and is now ready to be programmed to the vehicle
with a OBDII programmer.

[bank]

Looks like your screen is in Delivery Mode, you need to use OPCOM/TECH2 to set it to paired

SEE:
If you see "DISPLAY SAFE" flashing every 10 seconds, this means that the Display
is currently in Delivery Mode, and is now ready to be programmed to the vehicle
with a OBDII programmer.

Yes. As I say earlier, DIS and EHU was paired successfully (without any SAFE massages). But after pairing sound from radio and CD dissapears.
So, I unpair devices to delivery mode, after that a hear "beeps", and still no sound from FM/CD.

But, problem with sound was solved for me by resetting EEPROM via extended SETTINGS menu (press "Main", then "Setting" for 10sec until the message "Test mode switched on", then "BC", then "Audio" some times untill come to a screen with checkboxe "Reset EEPROM")

Thanks a lot! :chuncky:

[metkox360]

Hi i ordered a KS CID and seller said he doesnt know the code i can read the eeprom my friend has xprog and upa can anyone help me to unregister it when it arrives any day now?

[bank]

Post dump here and you'll receive pin

[metkox360]

Will do as soon as it arrives thnx in advance

[metkox360]

Hello screen arrived can anyone help me with the pinout of the CID so i can test it before i connect it to my car

[bank]

Pinout? What car you want to install CID in?
CID doesn't need to change pins in display connector

[Pedro13746]

Can i read the CID code in this image please?
Help me please.
Thanks

580592580593

[shooting]

Can i read the CID code in this image please?
Help me please.
Thanks

580592580593

It's difficult to read your poor images but looks Unregistered

wbr

[Pedro13746]

It's difficult to read your poor images but looks Unregistered

wbr
looks Unregistered? This CID have a code that i don't know
in some foruns, GID/CID - Siemens VDO 93c66 code @ 1E5 1E7 1E4 1E8
Can you help me with that information please?
Thanks

[shooting]

looks Unregistered? This CID have a code that i don't know
in some foruns, GID/CID - Siemens VDO 93c66 code @ 1E5 1E7 1E4 1E8
Can you help me with that information please?
Thanks

ACTUALLY post your dump....

wbr

[jacck]

I need carpass from dump VDO CD 70 navi

[shooting]

I need carpass from dump VDO CD 70 navi

Pin in your dump is 8079 but for CAR pin you need dump from Display not radio

wbr

[jacck]

It is display dump 93c66 readed as 8 bit

[bogege]

It is display dump 93c66 readed as 8 bit

also code 8079

[shooting]

It is display dump 93c66 readed as 8 bit

What is the problem you are having? Display and Radio are matched pairs and should work without programming

wbr

[jacck]

I need carpass. I want to programm new key to immobiliser.
So if radio is paired with car then RADIO PIN = CARPASS?


What is the problem you are having? Display and Radio are matched pairs and should work without programming

wbr

[bank]

if radio is paired with car then RADIO PIN = CARPASS?
If your car's VIN is W0L0AHM75A2103116, then pin (security code from carpass) is 8079.
Carpass is the card with VIN, security code, engine type, radio type, key number etc
627290
627291

[xCInstinct]

Hello Guys :) hope that someone is still active here.
Is it necessary that the VIN on the eeprom of the CID and CD70 is the same?
I bought a CD70 and read the Security code and the same with my CID and Changed the Code from the CID to the same as the CD70 but still doesnt work ...

[shooting]

Hello Guys :) hope that someone is still active here.
Is it necessary that the VIN on the eeprom of the CID and CD70 is the same?
I bought a CD70 and read the Security code and the same with my CID and Changed the Code from the CID to the same as the CD70 but still doesnt work ...

Did you replace both Display and radio, give full details

wbr

[xCInstinct]

Did you replace both Display and radio, give full details

wbr


No the CID was installed since release (Astra H Opc 2008 and i got no Car Pass) but i bought the Car with an attachment Radio and i bought a used CD70 without a Security Code.
So i read the eeprom from the CD70 (7609) and CID too (9807 must be the Original Code) and i wrote the eeprom form CID with the new Code from CD70 so both got the 7609 Code.
But i didnt works ... maybe the China Clone Op Com is fault ??

Thanks in advance

[shooting]

No the CID was installed since release (Astra H Opc 2008 and i got no Car Pass) but i bought the Car with an attachment Radio and i bought a used CD70 without a Security Code.
So i read the eeprom from the CD70 (7609) and CID too (9807 must be the Original Code) and i wrote the eeprom form CID with the new Code from CD70 so both got the 7609 Code.
But i didnt works ... maybe the China Clone Op Com is fault ??

Thanks in advance

The fault was yours, code for both need to be 9807, restore original dump to display,
then Virgin radio and pair using 9807...

wbr

[xCInstinct]

The fault was yours, code for both need to be 9807, restore original dump to display,
then Virgin radio and pair using 9807...

wbr

Ohh shit :D I didn´t know that. Okay no Problem i saved the Original .bin from CID but how to Vergin the CD70 ?? Or i just have to change the Code at the CD70 eeprom to 9807 ?

Thanks a lot !!

[shooting]

Ohh shit :D I didn´t know that. Okay no Problem i saved the Original .bin from CID but how to Vergin the CD70 ?? Or i just have to change the Code at the CD70 eeprom to 9807 ?

Thanks a lot !!

Send me your cd70 dump and i'll virgin it for you
or just unregister it from previous car...

wbr

[xCInstinct]

Send me your cd70 dump and i'll virgin it for you
or just unregister it from previous car...

wbr


Here are both files. (Original)

[shooting]

Here are both files. (Original)

................................................

wbr

[xCInstinct]

Here.................

wbr

Okay and now just write the eeprom from CD70 with this file and everthing will work ??

[shooting]

Okay and now just write the eeprom from CD70 with this file and everthing will work ??

Use the file and then you will need to pair using 9807

wbr

[xCInstinct]

Hey :) Your Reset works, EHU is Virgon now, but the China OP COM with Firmware. V1.99 is not able to write the EEPROM. Got another Version (V1.64) with 2010 Op com its the same Problem.
Think i need a Tech2 to marry.