Rang Rover programming skills

[Slem]

Hi .. A Rang Rover Sport 2009 with flip key design .. All keys lost, I need help to know where is the immo data location (some people told me in the internal fuse box ) behind the glove box .. i searched there and found a fuse box with PCB have a Motorola MC9S12DG256, Has 112 pins with Mask 0101Y .. I want to read it with X prog 5.6, the diagram required also if it is secured or not ?. If this is wrong immo data location please direct me to the correct location ..

check the attachments

Thank you
Slem

[bearheroes]

It also has pic controller...keys are there


Sent from my iPhone using Tapatalk

[topclef]

PIC18F6620

[PremierD]

Perchance ...?

[bearheroes]

If this is by chance then start betting...you will be rich... :)


Sent from my iPhone using Tapatalk

[Slem]

Thank you all for the help ..

Now the only devise that make a key for this Range Rover is the TMPRO2 .. Any other devise can do that ?? also what programmer can read the Microchip PIC18F6620
with 100% success ??

Thank you
Slem

[bearheroes]

Tmpro and i think mk3...this is the answer for both questions


Sent from my iPhone using Tapatalk

[Slem]

MK3 original or clone ?

[bearheroes]

is there clone?
I don't have both...but as i know ori works...

[Slem]

Yes there is a clone one with 1000 $ full software without token cost ..

[Slem]

Now please if any one give me a devise can make the lost key situation for this vehicle Range Sport 2009 except TMpro2 and MK3 .. Any help please

Thank you
Slem

[bearheroes]

If you have vvdi prog read and post dump...may someone can help...


Sent from my iPhone using Tapatalk

[lalaina74]

Now please if any one give me a devise can make the lost key situation for this vehicle Range Sport 2009 except TMpro2 and MK3 .. Any help please

Thank you
Slem
One month ago, I have do a key for a discovery 3 all lost key. ( the same as range sport 2009 CEM). I have a vvdi prog to read the CEM and a vvdi2 for create the id46 key with an 7936 chip.

Envoy? de mon SM-A500H en utilisant Tapatalk

[Slem]

OK .. thanks for all how interested in my post .. now the VVDI prog and VVDI2 can do the job with TMPRO2 and MK3 .. Any one test other devise for Rang Rover Sport and Discovery flip key all lost ? waiting for the answer ..

Thank you
Slem

[lalaina74]

OK .. thanks for all how interested in my post .. now the VVDI prog and VVDI2 can do the job with TMPRO2 and MK3 .. Any one test other devise for Rang Rover Sport and Discovery flip key all lost ? waiting for the answer ..

Thank you
Slem
For me , I create the key with 7936 firts with vvdi2 and after I program a flip key (with remote) with a obdstar X300 . Because X300 can't do all key lost but can add flip key via obd if you have a working key

Envoy? de mon SM-A500H en utilisant Tapatalk

[autodiagservices]

Hello guys,

Can anyone give me a link via PM where to purchase VVDI2 for Land Rover key programming.

Thanks in advance.

[bahlawi]

USE TMPRO2 with 100% success

[electromech]

USE TMPRO2 with 100% success

TMPRO2 is way over priced no one can argue its a VERY good tool but with his pricing he leaves very little for us to make ......I have had about maximum of 3 cases for these cars in a All key lost senario...so it would have not paid me back at all

[large12390]

hi
please need help to know if this x5 have adption or losed its
becuse when i do key dont start
regards