View Full Version : Skoda Symphony 6Y0035156E SKZAZ9E 3748408 2x24c08 need code
krzysiekgsm
16th January, 2018, 11:41 PM
Hi, need code Skoda Symphony 6Y0035156E SKZAZ9E 3748408 2x24c08
oryginal dump from 24c08 left
Raimax
17th January, 2018, 12:17 AM
Upload another. There is no code in this dump
krzysiekgsm
17th January, 2018, 12:38 AM
second 24c08 read is code 0684??
shooting
17th January, 2018, 12:44 AM
second 24c08 read is code 0684??
Yes 0684 ;)
wbr
krzysiekgsm
17th January, 2018, 01:10 AM
still SAFE 0684 not working or blocked counter
smoggy
17th January, 2018, 01:20 AM
still SAFE 0684 not working or blocked counter
I think counter is reset on 00
krzysiekgsm
18th January, 2018, 08:58 PM
How to reset counter ?? Any idea?
bogege
18th January, 2018, 09:19 PM
How to reset counter ?? Any idea?
Please note that code entry is only possible with the ignition switched on, and when " 1 - - - - " is shown in the display. If the display continually shows "SAFE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.
Code Entry as Follows:
Switch Radio On - Display Shows
" SAFE " and then shows " 1000 "
(This May Take A Few Minutes - Be Patient)
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press RH Tuning Button " > " to Enter
krzysiekgsm
18th January, 2018, 11:51 PM
I think code 0684 is wrong generator NYO4/curde205 is for model with 6Y0 035 156D my radio is 6Y0 035 156E
SKODA
SYMPHONY CD SKZAZ9
CODE 0000-1999
6Y0 035 156E
TECHNISAT
M306N5FCTFP 502D
24C08 + 24C08
EEPROM
TDA7454
lucic66
19th January, 2018, 08:38 AM
Hi,this ist corect code500024
I think code 0684 is wrong generator NYO4/curde205 is for model with 6Y0 035 156D my radio is 6Y0 035 156E
SKODA
SYMPHONY CD SKZAZ9
CODE 0000-1999
6Y0 035 156E
TECHNISAT
M306N5FCTFP 502D
24C08 + 24C08
EEPROM
TDA7454
darius89
24th May, 2018, 03:15 PM
hi, does possible to change code ???
my first button not working...... need to make it 1 because it starts 1000
masterskay62
24th May, 2018, 03:22 PM
hi, does possible to change code ???
my first button not working...... need to make it 1 because it starts 1000
Hi. Read 24с08 and put it on the forum
darius89
7th June, 2018, 01:54 PM
Hi, does possible to change code ??? or remove.
My first button not working...... need to make it 1 because it starts 1000
Dekster
7th June, 2018, 01:58 PM
Hi, does possible to change code ??? or remove.
My first button not working...... need to make it 1 because it starts 1000
Hi,
Try.... 1832
534027
iulianp
9th June, 2018, 10:16 PM
Hi, need code SkodaSymphony 6Y0035156E SKZAZ9E 3756620 2x24c08
original dump 24c08 edge
Thanks a lot
Albert G
9th June, 2018, 10:18 PM
Hi, need code SkodaSymphony 6Y0035156E SKZAZ9E 3756620 2x24c08
original dump 24c08 edge
Thanks a lot
Hello,
Try code .. 1004
shooting
9th June, 2018, 10:19 PM
Hi, need code SkodaSymphony 6Y0035156E SKZAZ9E 3756620 2x24c08
original dump 24c08 edge
Thanks a lot
Your code is 1004
wbr
iulianp
9th June, 2018, 10:56 PM
1004 is OK
THANKS A LOT!
gulyasband
16th August, 2018, 12:04 PM
Hi,this ist corect code500024
Hello friend. Would you help me with the program you see in the picture? THX!
getodac
28th October, 2018, 10:38 PM
Hi!
Need code for
symphony 6Y0035156E
SKZAZ9E 3773069
Dump of 24C08:
567786
Thank you in advance!
shooting
28th October, 2018, 10:46 PM
Hi!
Need code for
symphony 6Y0035156E
SKZAZ9E 3773069
Dump of 24C08:
567786
Thank you in advance!
Your code is 0892
wbr
getodac
29th October, 2018, 07:48 PM
Your code is 0892
wbr
I tried it, but it not works. Still SAFE. Why is not working...?
Another question: How do you read 24c08 memory of Symphony car radio? I use an Arduino which reads the 24c08 through I2C. But I can't read second 24c08 and I didn't figured out yet where is the problem. All bytes are read as 0xFF...
getodac
1st November, 2018, 11:14 AM
Finally I was able to unlock my radio. The problem was Arduino which was connected to the 24c08 in the moment when I was entering the 4-digit code. It somehow jammed the I2C bus and Radio wasn't able to read the content of 24c08 at all. I observed that with the help of a USB oscilloscope (Hantek 6002BE) and with the help of sigrok pulseview software (great application for debugging serial buses - https://sigrok.org/).
dogantr
11th January, 2020, 09:10 PM
SYMPHONY CD SKZAZ9 3737318
CODE 0000-1999
6Y0 035 156E
TECHNISAT
M306N5FCTFP 502D
24C08 + 24C08
EEPROM
TDA7454
Hi guys I need code of it. Could you please help me?
masterskay62
12th January, 2020, 04:46 AM
SYMPHONY CD SKZAZ9 3737318
CODE 0000-1999
6Y0 035 156E
TECHNISAT
M306N5FCTFP 502D
24C08 + 24C08
EEPROM
TDA7454
Hi guys I need code of it. Could you please help me?
Hi, read eeprom and post here
lukas SKZAZ6C10
12th November, 2022, 05:43 AM
i need radio code skoda for serial SKZAZ6C1035794
Mankyro
12th November, 2022, 11:02 AM
i need radio code skoda for serial SKZAZ6C1035794
Read 24c08...........
Sava1101
19th November, 2023, 10:13 PM
Hello. I need help. Symphony code SKZ2Z3B1261856 please.
Mankyro
19th November, 2023, 10:15 PM
Hello. I need help. Symphony code SKZ2Z3B1261856 please.
STOP SPAM............
https://www.digital-kaos.co.uk/forums/showthread.php/419492-Symphony-Radio-Code/page3
audiopoint
9th September, 2024, 08:29 PM
help skoda code 2x 24c08
diaz38
9th September, 2024, 08:38 PM
try 0518 ...........
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.