SKODA STREAM BEEPROG 2 HOW TO

[Renodiag]

Hi, I Need help. I have borrowed an Elnec BeeProg2 universal Programmer and want to read a Skoda Stream mp3, Chip first Motorola, now renamed Freescale Semic. Type: MC9S12DP512. The Programmer has an ISP (In System Programming) cable, I Need to use that cause I dont have an Adapter for ZIF-Socket. I got the Pinout for the chip and a Little schematic in the Program for how to connect the ISP, but I dont know how to connect it completely. It would be nice if some pro here could help me. Thx. schematic (Beeprog.rar) and Pinout attached.

Pinout:http://www.datasheetlib.com/datasheet/90665/mc9s12dp512_motorola-semiconductor.html?page=52#datasheet

[Raimax]

Hi, I Need help. I have borrowed an Elnec BeeProg2 universal Programmer and want to read a Skoda Stream mp3, Chip first Motorola, now renamed Freescale Semic. Type: MC9S12DP512. The Programmer has an ISP (In System Programming) cable, I Need to use that cause I dont have an Adapter for ZIF-Socket. I got the Pinout for the chip and a Little schematic in the Program for how to connect the ISP, but I dont know how to connect it completely. It would be nice if some pro here could help me. Thx. schematic (Beeprog.rar) and Pinout attached.

Pinout:http://www.datasheetlib.com/datasheet/90665/mc9s12dp512_motorola-semiconductor.html?page=52#datasheet

A lot of information about it is here. Use the search

[Renodiag]

Yes I can find a lot of "I Need Pincode Skoda stream"

[Raimax]

Code only from dump. Where is it?

[ilen]

https://www.elnec.com/en/device/Freescale+Semic./MC9S12DP512+%5BLQFP112%5D/

or try connect and read MC9S12DP512....?

[Renodiag]

Oh what the ~~~~, I connected te Pins directly to the mcu. xD. I didn't know I had to solder this up this way. I try it.

[Renodiag]

Well, but the problem is also how do I know so, in the ELNEC program is only that I should connect the pins on the MCU, because you can not guess that it is these solder surfaces.

[Renodiag]

Could u please tell me the name of the software where you found the pinout in ? I think I already have it somewhere on my PC ,the resolution is too low to see anything except grnd.

[Renodiag]

Finally. Pls Code.

[kazek123]

Code--0019--

[masterskay62]

Hi.
Try.....0018 or 0011 or 0013 0017 or 0019

[smoggy]

I get 0019

[Renodiag]

kazek 100% thanks

[Renodiag]

After Reading dump and Disconnect cd Drive to geh access i get cd error when powering on the radio. The Connector fits Perfect and the Drive makes normal noises when powering on. The Disk that is still inside wont come out.

[Renodiag]

Solved. Missing CD changer causes this Problem.