View Full Version : Renault Espace ABS Fault
Ashraf6119
7th November, 2009, 04:17 PM
Hi
Basical this car is Renault Espace 2006 model with ABS fault and the fault codes are as follow
1) DF088 Pressure Sensor Circuit Incoherent Information Present.
2) DF088 Pressure Sensor Circuit Electronic Fault in Sensor Present.
Can any one please tell me the location of this Sensor to be.
Or any common thing to check for this fault.
Thanks Ash
MOBILTRONIC
7th November, 2009, 05:22 PM
I think,that pressure sensor must be in circle of Hydro-agregat,integrated part ABS module.Try with Autodata or Workshop find this pressure sensor how look like and electrical proceed to tested.Good luck!
synkrotronic
7th November, 2009, 07:15 PM
If external from abs unit,maybe on central pump to measure pressure when you push brake.
Sorry my technical english
( type ATE ? )
Regards
Meat-Head
7th November, 2009, 07:20 PM
the word from downtown is this is a common fault with lots of abs systems, Vw, audi, vulva, seat etc
the part that fails is currantly not available but somebody somewhere was eating a toffee crisp, whilst somebody somewhere else called three companies about this fault two instantly said 'the same thing' call back in one month and hope the part is available, the third company implied that the world was going to stop turning, but they could make it start again if the abs modulater was sent to them the world would start rotating, even if they were unable to make the thing work.
the three compaines, in no specif order are
www.ecutesting.com (http://www.ecutesting.com) www.bba-reman.com (http://www.bba-reman.com) www.cluster-repairs.co.uk (http://www.cluster-repairs.co.uk)
i can't be arsed to check the links are the correct spelling, so you might have to do some poking on google.
Ashraf6119
7th November, 2009, 07:34 PM
Hi
Thanks Guys
For the reply will have a look and let you know the out come of it.
Thanks Ash
zeca
8th November, 2009, 08:26 PM
Boa Noite
Vais ter de substituir o bloco hidraulico ABS (aconselho completo).Esse sensor faz parte do bloco.
zeca
8th November, 2009, 08:29 PM
Good night
You'll have to replace the ABS hydraulic block (perhaps complete). This sensor is part of the block.
Sorry I translate
Ashraf6119
9th November, 2009, 12:46 AM
Hi
Thanks for the reply :cheers:
Ash
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.