Interface ST10Flasher

[mardude]

Please, someone has the layout of the interface ST10flasher via K-LINE.
Thanks

[evgeniyy]

You need it?

[mardude]

You need it?


This is not used for TX and RX, the right has only LINE-K turned on OBD2.
Thanks for responding.

[Cordobe1]

Hi everyone,

Would have the schematic for the USB?

[Mac Gyver]

use the Kline of VAG KKL cable, the software ST10FLASHER recognizes the K line of this cable.
is necessary to connect resistors in some pins of the ST10Fxxx microcontroller for him to stay in bootloader mode.

[monini64]

can any body share st10flasher for obd? an in wich pin need put a resistance for bootloaders mode ?

[Cordobe1]

can any body share st10flasher for obd? an in wich pin need put a resistance for bootloaders mode ?


The soft is here : http://www.digital-kaos.co.uk/forums/attachments/f68/4871d1252247352-st10fxx-programmer-st10flasher-tool-v2.4b.rar

Say tnks to gezame (http://www.digital-kaos.co.uk/forums/members/72909-gezame/)

The pin is different for each ECU, you have to find the pin for each .-

[Cordobe1]

use the Kline of VAG KKL cable, the software ST10FLASHER recognizes the K line of this cable.
is necessary to connect resistors in some pins of the ST10Fxxx microcontroller for him to stay in bootloader mode.

Thank you very much for helping!

Can I use VAG COM (Chine Clone)? It is necessary to connect +12 & Ground?

[monini64]

http://www.digital-kaos.co.uk/forums/attachments/f68/4871d1252247352-st10fxx-programmer-st10flasher-tool-v2.4b.rar

this link dont work


no funka cordobe

[Cordobe1]

http://www.digital-kaos.co.uk/forums/attachments/f68/4871d1252247352-st10fxx-programmer-st10flasher-tool-v2.4b.rar

this link dont work


no funka cordobe

Hola Monini64,

Puse ese Link para no sacarle los creditos a Gesame, que muy gentilmente subio el soft.-

Aca esta subido a Rapid por Mi RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/339292735/ST10Flasher_tool_V2.4B.rar.html)



I put the link to not steal the credits that are "Gesame", ever so gently ascended the soft .-
Here is uploaded to RapidShare for me
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/339292735/ST10Flasher_tool_V2.4B.rar.html)

[gezame]

Hi
thanks cordobe.
Muchas gracias cordobe.
Regards.

[laszlo]

Where can i download this software?

[Mac Gyver]

http://www.racechips.com.br/arquivos/BOOTSTRAPS_4SF.pdf

a manual in brazilian portuguese on how to connect the resistors on ECU board to let the st10fxxx microcontroller in bootmode.

[Mac Gyver]

this RS232 to K Line interface works with ST10FLASHER software:

ECU to PC (http://www.hotserver.ch/Club-Calibra/pages/calscan01.htm)

[AndyPP]

ST10 - 16-bit Microcontrollers - Technical Literature and Support Files (http://www.st.com/mcu/modules.php?name=mcu&file=familiesdocs&FAM=17)
documentation and flasher tool

[dimitar]

This is excelent program for st10,infineon and micronas mcu. It works with max 232 interface but need to be cracked.It can also program eprom thru flash. Program FLASHit here HSE-Electronics the competence in embedded systems, C166- and CAN-Application.
(http://www.hse-electronic.de/English/Overview/overview.html)

[Cordobe1]

This is excelent program for st10,infineon and micronas mcu. It works with max 232 interface but need to be cracked.It can also program eprom thru flash. Program FLASHit here HSE-Electronics the competence in embedded systems, C166- and CAN-Application.
(http://www.hse-electronic.de/English/Overview/overview.html)

Hi,
In this post is the flashit, with its "crack"
http://www.digital-kaos.co.uk/forums/f104/flashit-9-full-62952/

Thanks for the info!

[Cordobe1]

this RS232 to K Line interface works with ST10FLASHER software:

ECU to PC (http://www.hotserver.ch/Club-Calibra/pages/calscan01.htm)

Tnks lot Mac Giver!

I can use de VAG-COM, Galletto 1260 o KWP2000 to comunicate to ECU?
I say this not to build an interface with MAX232 .- I very much appreciate your help!

[Cordobe1]

Where can i download this software?

Here (is "live" again)
http://www.st.com/mcu/files/mcu/1158679843.zip

:ridinghorse:

[trainiti]

Hi, I'm looking for an interface for st10f275 microcontroller that is implemented in an ECU. I'm trying to read/write in the flash.

[arenasaa]

hello
i am carlos arenas from mexico city

[kinggsm]

this RS232 to K Line interface realy works ?

[Marcio Midasfish]

[QUOTE = Mac Gyver; 426157] esta interface RS232 a K Line trabalha com software ST10FLASHER:

ECU para PC (http://www.hotserver.ch/Club-Calibra/pages/calscan01.htm)[/ Quote]


Hello friend, with this scheme I can read ecu with ST10, for example 4SF?

[TECNICAR345]

hello friends! which is the correct interface to run the software?
someone honest?

[TECNICAR345]

hola cordobes ! fabricaste la interface ? funca? vos tenes la info para conectarla a las diferentes ecu ?

[DiegoAC]

Hey guys, argentinos incluidos. As a general rule of thumb you can access st10 through k line putting pol04 to mass and pol05 +5v. do it through 100ohm resistors. x-progM is suggested.
So look for those pins in the appropriate st datasheet!

Regards...

[yellowstilo]

as requested by marcio1758 because the previous link is dead:

[piticulto]

Hola amigo Diego, yo soy de Chile ,
Grande messi


queria ver si me puedes ayudar con el tema de tratar de leer y escribir en la st10f280 que trae la ecu del siena 4sf.cs.
Por este link sale manual de bootsstarp que no entiendo para que es, lei que tu se?alas que se puede leer con xprog -m que yo tenbgo, buscando en el menu sale la conexion pero no la entiendo, no se donde pinzar en la ecu???'
me puedes ayudar ???
saludos
http://www.digital-kaos.co.uk/forums/images/styles/digital/statusicon/user_online.gif Hola amigo Diego, yo soy de Chile ,
Grande messi


queria ver si me puedes ayudar con el tema de tratar de leer y escribir en la st10f280 que trae la ecu del siena 4sf.cs.
Por este link sale manual de bootsstarp que no entiendo para que es, lei que tu se?alas que se puede leer con xprog -m que yo tenbgo, buscando en el menu sale la conexion pero no la entiendo, no se donde pinzar en la ecu???'
me puedes ayudar ???
saludos
http://www.digital-kaos.co.uk/forums/images/styles/digital/statusicon/user_online.gif Hola Diego che guevara, queria ver si me puedes ayudar a leer con el xprog m una ecu de siena 4fs.cs que trae st10f280. No entiendo el dibujo que trae el xprog, no se donde pinzar en la ecu???
necesito matarle el immo pq ese auto trae esa maldita mascara 1k59h o algo asi que solo lee la omega y genara la tango , maquinas que no tengo por lo costosas.

saludos

pd: para que es el manual de bootstarp brasilero que postearon mas arriba???'

[JUANK]

hola,
no he podido encontrar de donde bajar el st flasher, alguno lo tiene y lo puede subir en algun file server.
I couldn't find st flasher soft. does anyone have it and upload it into any file server
thanks

[JUANK]

couldn't find st flasher do you have it?

[automan]

none of the links for download does not work.can someone upload it please
br

[autoelite]

hi, i have it.

[jarripote]

Thank you very much for the info :top:

[Mulatre]

Guys, i have original flash of ST10F280 in ST10Flasher tool format 1*474*724 bytes.

How can i export flash from it?

It must be 524288 bytes.

[dimitar]

Guys, i have original flash of ST10F280 in ST10Flasher tool format 1*474*724 bytes.

How can i export flash from it?

It must be 524288 bytes.
Read the datasheet you will see the flash location

[brchip]

So, is it possible to use a VAG-COM KKL cable with the ST flasher? In this case, do we need to modify anything?

[kableman]

You need it?
Thank you!!!!!

[brchip]

hi, i have it.

Hello, I built the KL Simple from the diagram above but it didn't work...do we need any drivers or just the regular Windows com port driver?

[elna]

Hi, I'm looking for an interface for st10f275 microcontroller that is implemented in an ECU. I'm trying to read/write in the flash.

[dimitar]

Check this Anbindung an FLASHit (http://www.hse-electronic.de/Deutsch/Produkte/dFLASHit-Developer/dInfineon_MCUs/dScreen-Infineon/dAnschalt-Infineon/danschalt-infineon.html)

[AlbertM]

Check this Anbindung an FLASHit (http://www.hse-electronic.de/Deutsch/Produkte/dFLASHit-Developer/dInfineon_MCUs/dScreen-Infineon/dAnschalt-Infineon/danschalt-infineon.html)
Hy , this work with Flashit? tested , i need to read write st10f269

[tatop]

hi friends, i have proble for reaf ecu 5sf8 with st10flasher
ecu ha ST10F296
i use interface obd
com OK
monitor ok
but when i read dump error
*Dump-->ERROR
Description: LoadExternalFlashMonitor: target Not found
but if i read dump SCREEN SELECTION is ok
if i read with TXT and not with HEX is OK
please help

[brchip]

I'm having a problem with ST10 Flasher 2.4B , I get this message:

I'm using a real COM port laptop, but I'm looking for a circuit version that works with USB, anyone?

[monini64]

I'm having a problem with ST10 Flasher 2.4B , I get this message:

I'm using a real COM port laptop, but I'm looking for a circuit version that works with USB, anyone?
yu can solved your problema, i hve same problema, can you help mi?

[datapage]

Inpa Ediabas OBD2 Interface Ediabas OBDII Interface for BM-W

COM ,FULL ST10F.

[monini64]

i not undertand

[Auto Clinic]

i could not open links ,
any body can attach dumps and software?

[Multipla]

Look here
ST10F296 suppliers and datasheets, find price and where to buy (http://www.digchip.com/datasheets/quote.php?action=search&pn=ST10F296)

[elmassioui]

hello friends
is there anyone using flashit software ?
thank you

[Zmann]

used it sometime ago

[Marek_Spy]

Hello guys
Can you help me read eeprom ST10f280 ? ECU IAW 6LP1.08 . I must immooff or virgin

[Zmann]

What's tool do you have ?

[TheCzopek]

Hi anybode have st10flasher 2.4b ?

[mardude]

Hi anybode have st10flasher 2.4b ?

This link, friend.
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=9594&d=1263584746

[mchelli]

thanks for the info

[NicolasARG]

Hello everybody, some have a circuit to read and write the ST102XX microcontrollers ?

[crossalapante]

hi, can i flash st10f275 using Flashit ? and what interface it should be ?

[crossalapante]

ok, i got it now. ST10Flasher works on windows 10 64 bit.
just provide all dll and ocx in system32 and sywow64 then register it.

now i'm trying to build conection with rs232. i will update soon

[crossalapante]

btw for information, i'm trying read the st10f275 from kia ecu.
using k-tag to clone ecu with the same hardware, but only the engine that cloned. the transmission did not.