Chrysler,Dodge,Jeep programming key bypass

[ray-ray]

There is a engineering glitch with the system. Can bus hi / low grounding the will put you in programming mode bypassing the pin code. I will make video showing how it’s get done.

[jmcsecurity]

Upload it!

Thanks.

[ray-ray]

Look it coming

[qeso705]

Can you share more details?

[sleepyrz]

Can-bus hi / low grounding this will put you in programming mode bypassing the pin code


what a sentence!


many thoughts

[N54TS]

Good to hear!

[dubb45]

I guess he means to short the pins out like connect them to ground?

[klaudio]

Can you share more details?

From Ray-ray There is a engineering glitch with the system. Can bus hi / low grounding the will put you in programming mode bypassing the pin code. I will make video showing how it’s get done.

patience is a virtue.

[ray-ray]

I’m getting all the facts first, plus I’m check with the dealer wire schematic. It has been reported that it can damage the rf signal on some model. I’ve been hear of these method for over a month. Heard that Kim was going to sell a wire. I’m getting more info from iks also video to prove my findings. Once all is clear I will follow up with a detail post.

[dubb45]

Just a thought I’m guessing bench flashing would be ideal for this with only the single module.

[ray-ray]

You only have 4 wires one's ground one's positive then you have to plug into can high can low either under the dash or behind the cluster by tapping into the two wires.Wires for can low and highCan low is yellow
Can high brown and white

[ray-ray]

I’m getting more info everyday. Order the wire and ask for a video from the maker.

[Freebsd]

if you give a little more info I can tryit tomorrow or day after since I only work Monday threw Friday ,,, the new vehicles in those lines have several can networks , I can do any but question is were ,,,, I can bypass the gw and go straight to the hub ,,,, and info greatly appreciated ,, in box if necessary

[Freebsd]

also for a fact I know I cant talk directly to the hub ,,, ive tried it on bench ...

[sleepyrz]

Yeah I think I just watched a video of it

[ray-ray]

https://www.vag-info.com/category/preview/FIAT?scroll=1797

there 3 videos 2 with the device. Look at the last video there the manual way.

[drugowaz]

So for this need buy device in video?

[Locksmith Hungary]

vag-info.com is just a reseller...do not buy from Voskan !
The device producer is a Italian guy.
You can found it on youtube or ebay - better price.

[qeso705]

Are you 100% sure that whole trick is only grounding can? Rf hub is same as in other FCA models?

[ray-ray]

SmartBox® Update on Chrysler/Jeep/Dodge 2018!
Security Gateway Bypass Cable from SmartBox now available to program the following vehicles:
Chrysler 300 2018 (tel:300 2018)
Dodge Charger 2018
Dodge Challenger 2018
Dodge RAM 2018
Dodge Journey 2018
Jeep Renegade 2018

[sleepyrz]

whoops wrong thing my bad

post deleted

[ray-ray]

2018 Leak how long before the fix? Closed

[godfathertre]

i am sure there will be a software upgrade from fiat that will stop this in the near future .

[sleepyrz]

Well it's apparently been there since 2007.......

So probably never.......

[lpf01]

Well it's apparently been there since 2007.......

So probably never.......

What you talking about is an emergency start system not key programming, not the same tool and method as in the posts before :) dont mix it up :)

[sleepyrz]

sorry meant to post this before instead of the other one. it was late..................






!!! NEW !!! FIAT/ALFA ROMEO Key Programming device - FLA2 (only for Keyless Go keys for ALFA ROMEO Giulia, ALFA ROMEO Stevlio, FIAT 500X and JEEP RENEGADE)
The device will program new blank key with Keyless Go/Proximity fuction to ALFA ROMEO GIULIA, ALFA ROMEO STEVLIO, FIAT 500X and JEEP RENEGADE for the moment. In the future we will add more models. All you need is our special device and one new blank key and in few seconds the key will be programmed. The whole procedure is done via OBD II and works also for model in 2018 year.
NOTE: The device program !!! ONLY !!! Keyless Go keys but not normal fo the two models for now and IT IS NOT DOING IMMO BYPASS.


Models covered:



[*=left] ALFA ROMEO Giulia 2015 - 2018
[*=left] ALFA ROMEO Stevlio 2015 - 2018
[*=left] FIAT 500X 2014 - 2018
[*=left] JEEP RENEGADE 2014 - 2018

[pkeeney]

Look it coming

Abrites beat them to it, already set up and dont have to buy a $300 cable. I haven't tested it yet but i have a 2018 Chrysler pacifica rent-a-car in my possession to try it on. Just need to know where RFH module is located and Can High/Can Low wire colors

[dubb45]

Check out the mopar site, “http://connectors.dcctools.com/home.htm” has all the colors of the pins and everything. My go to site for all the mopar connectors

[keysmith]

Gateway Bypass Cable connection

https://www.youtube.com/watch?v=2v8lRXv6yVo

[sleepyrz]

What's the word on this guys?

[camelgd]

Time to bump this one. Is anyone using cable with APP on a regular basis? Has someone come up with a list of connector locations for different models? I have a 2019 Ram to do this coming week, and seen just one video on you tube that isn't great at explaining location on Ram and other vehicles. Someone please tell me its a piece of cake, even if you have to lie...:itsme:

[sleepyrz]

There's many different methods
But basically I think the idea is to get the gateway to go to sleep or just get bypassed

There's a method where you literally take the gateway out and put in a cable as a jumper then program like normal


For the ram tho
Dodge Ram

Under driver’s side dashboard to the left

Red to Green | Black to Yellow

[camelgd]

That's what I gathered from the one American video. I will have cable Tuesday, Will check it on Wednesday on 2019 Ram older style body with fobik.

[camelgd]

Success! Nice to have something untried go so smoothly. The probes were hard to get in place, not much room left in the connector. I might explore getting a couple of clamp type connectors to just connect to the wires directly, but overall, it was a very good experience.

[sleepyrz]

bend them 90 degrees

[VictorVonDoom]

I found this helpful the other day.

https://www.americankeysupply.com/pages/everything-you-need-to-know-about-the-chrysler-security-gateway

[camelgd]

Is anybody using this? I've used Brute force cable on three Rams, success on all three. I just don't see much solid info on where to insert probes, color of wires seem to be different on each different vehicle. It seems like the manufacturer could provide a little info on how to use tool if they wanted to sell more units. I've seen all videos available, but would really like to see something in print. Anybody got anything? I have two Pacificas that I need to do, I know where Star connector is, but not which pair of wires to probe and I'm sure not just going to guess.

[sleepyrz]

Is anybody using this? I've used Brute force cable on three Rams, success on all three. I just don't see much solid info on where to insert probes, color of wires seem to be different on each different vehicle. It seems like the manufacturer could provide a little info on how to use tool if they wanted to sell more units. I've seen all videos available, but would really like to see something in print. Anybody got anything? I have two Pacificas that I need to do, I know where Star connector is, but not which pair of wires to probe and I'm sure not just going to guess.


there are multiple ways of doing it

you dont need to rely solely on that one way

get the other types of cable to remove gateway completely from circuit like autel 12+8 cable or obdstar 12+8 cable

there is no need to guess anything with that way

[sleepyrz]

As much as the brute force cable makes it easy id say its the most dangerous way out of all the methods......

Touching those two probes together can have bad effects.......

All the other methods are safer?

Zedfull connects to the cluster

Smartpro has a connector on the wire ends for star terminal


Obdstar removes gateway and cables are in place bypassing it

All work

Some are easier on different cars as Well

Depends on component location amd ease of access

[camelgd]

I've connected to star connector on Jeep Wrangler and on the Pacificas- not too hard to do. One thing I do now is put one probe in, then put small piece of tape over bare part of probe, then put in second probe. Also I don't plug in to APP until probes are in place.

[randyrash]

can this work with obdstar x100pros?

[sleepyrz]

Should work