Sprinter immo problem - need dump

[lupu_sandu]

Hi guys,
I need a little help over here.
I have one Mercedes Sprinter from '96.
Problem is that immobox is fu*cked up. I change immobox with other but now car not starting.
I have a dump from immobox (0D62J) and from ECU (24c02) but
Mercedes Start Error don't work, also immotool don't work on this.
Anyone have both working dump for this type?

[adam28]

Did you get a solution mate?
Been trying but cant find them dumps you need anywhere!

Cheers

[lupu_sandu]

I have one clear from one user ( pkucz).
I will try tomorrow and report here.

[PremierD]

Hi guys,
I need a little help over here.
I have one Mercedes Sprinter from '96.
Problem is that im*obox is fu*cked up. I change im*obox with other but now car not starting.
I have a dump from im*obox (0D62J) and from ECU (24c02) but
Mercedes Start Error don't work, also im*otool don't work on this.
Anyone have both working dump for this type?

Do you have the dump from the 24c02 mate ...?

[lupu_sandu]

I have this 2 dumps,
original and cleared by a user (cleared with immotool and mercedes start error not good).

[adam28]

This is virgin dump for Sprinter HC05 im*o
And a modified 24C02 unlocked with cartool
I compared with the one you had cleared and there is a difference Looks pretty good to me

[arvydax]

Hi, send my dump from immo box hc05 and ecu 24c02,maybe hellp

[BRUCEWALES]

Hi guys

Im well up on the CDI Sprinters
But need some help with the older 310/312
Do you need to remove the chip to read it or not, any help greatly appreciated

[eepromRipper]

am pretty good at sprinter and vito, let me know if you still need help.

[Meat-Head]

Hi guys

Im well up on the CDI Sprinters
But need some help with the older 310/312
Do you need to remove the chip to read it or not, any help greatly appreciated

off topic:

If this is the one with the mechanical diesel pump, with a vacum controled stopp solenoid and basic transponder immo?

90% sure you look at the diesel pump and it's looking back at you, on the side of this is a shear-bolt, the (think black) bit at the botom is 'just' a coded solenoid, get an old screwdriver you don't like, tw*t it with a hammer and 90% sure it will 'pop' out, onto the floor, leave the plunger where it lies, and twat the solenoid back in place any deny all knowage

z786opw

[dediegokey]

Hi guys is there is a way to get the in code for prog-key
other than Dealer?
Luis

[darwins]

Hello Friends..

Is there a matched IMMO & ECU set here for a Sprinter 312 I can make a new key for ?

ECU Bosch MSA 25.2 (B58383) = 0 281 001 643 / A 022 545 34 32
IMMO Temic (0D62J) = 020 545 56 32

Thanks in advance.

Darwins

[Meat-Head]

Hello Friends..
Is there a matched IMMO & ECU set here for a Sprinter 312 I can make a new key for ?

ECU Bosch MSA 25.2 (B58383) = 0 281 001 643 / A 022 545 34 32
IMMO Temic (0D62J) = 020 545 56 32

Thanks in advance.

Darwins


iF a set of vito dumps with repaired start error are of any use, ask our man in the shithole place of Neverneverland - Called Neverneverland because you never want to go back to the area

Meat.

[darwins]

iF a set of vito dumps with repaired start error are of any use, ask our man in the shithole place of Neverneverland - Called Neverneverland because you never want to go back to the area

Meat.

Ok, I'm sure your right Meat even If I'm totaly lost LOL..

[Meat-Head]

Ok, I'm sure your right Meat even If I'm totaly lost LOL..


For my summer holiday went to see Obdmaster in Neverneverland, town is a shithole, only part of town that didn't need demolshing was Obdmaster Motors.

I took - as you do on holiday - a Vito immobox and ecu (same van) and we played with it, so IF he has the dumps still, ask him nicly to post them.

(corrupt and good ones)

Meat.