Flashing DM800 problem!

[reloaded]

Guys

im desperately looking for some advice!

Iiv just tried flashing my dm800 with dreamup V1.3.3.4, as
it stuck on the ''dreambox mulimedia''

once i reach the stage where it says, connection established
please power up dreambox, the following error message is displayed...''IS NOT A VALID INTEGER VALUE''

what does this mean, and what im i doing wrong?

i have a clone dm800 with bl72...

can someone please help me out?

thanks in advance!

[kevin64]

hi
what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help

[westkill]

not 100% sure
this version worked for me on a clone i think lol

[reloaded]

kevin

does this mean my pc will have to be connected to the net aswell???

at the moment its not, as its a very old pc...

can i randomly choose an ip address for teh box?

sorry to sound really silly mate...its the first time im doing this!

[kevin64]

only need dm on net yes you can name your ip only if you do the way i said other wise dm will pick ip for you 192.168 +++ +++

[reloaded]

westkill

iv tried that version still the same old message

''IS NOT A VALID INTEGER VALUE''

keeps popping up...

[westkill]

have you tryed dreamup with network unticked with null modem cable

[reloaded]

yes i have, westkill

im gonna try wat kevin has already told me....

see if i can get it to work...

its so frustrating, honestly... :(

[westkill]

yea m8 just reread what kevin said properly lol
thats worked for me before as well with a clone :)

[kevin64]

TRY THE

Digital Kaos - Downloads - dreambox enforcer (http://www.digital-kaos.co.uk/forums/downloads/other/8/dreambox-enforcer-990/)

read file in there
click connect, a status massage will be displayed saying the connections prepared now switch on the Dreambox.Do this by either switching back on the power at the plug socket or putting the power cord back into the power socket at the rear of your Dreambox.

DONOT put power to dm before you have prepared connect

[reloaded]

Kev

tried the enforcer mate, but now i keep getting ''file too big''
when i select flash to upload the nabilo image....

is my box knackered?

only had it for 2 days! :(

[reloaded]

Kev

u are an absolute star!

followed what you said about the first solution...
about establishing a connection via the null modem cable
and then flashing it via the web portal......it worked perfectly!

got my nabilo image installed, and now just playing around with some settings... :)

thanks to westkill as well!

speak again...soon!

[Hell-o]

Yes man you are a really star and the only that have explain the real guide thank you very very much

[issam]

Yes man you are a really star and the only that have explain the real guide thank you very very much


TRY THE

Digital Kaos - Downloads - dreambox enforcer (http://www.digital-kaos.co.uk/forums/downloads/other/8/dreambox-enforcer-990/)

read file in there
click connect, a status massage will be displayed saying the connections prepared now switch on the Dreambox.Do this by either switching back on the power at the plug socket or putting the power cord back into the power socket at the rear of your Dreambox.

DONOT put power to dm before you have prepared connect

thanks a lot

[flagooner]

Hi please help me I am completely new to this I have read everthing I could about flashing a Dreambox 800 and when I try to flash I get the same problem as Reloaded ie " is not a valid integar value" I don't undrestamd Kevin's instructions clearly I am an idiot but which cable do I connect to the DM800? and select IP is not available.Please can someone help me, thank you

[network-nt]

not 100% sure
this version worked for me on a clone i think lol
It worked a treat! Many thanks!

[av2008]

Hi please help me I am completely new to this I have read everthing I could about flashing a Dreambox 800 and when I try to flash I get the same problem as Reloaded ie " is not a valid integar value" I don't undrestamd Kevin's instructions clearly I am an idiot but which cable do I connect to the DM800? and select IP is not available.Please can someone help me, thank you

Basically open up that software that Kevin has supplied in his second post (Dreambox enforcer). Once you do that you have to connect the DM800 to a pc with a null modem cable (RS232 cable) whilst the DM800 is off. Then click connect on the software and turn on the DM800 from the mains.

The null cable goes into the COM port of a pc, if you have a laptop you can use a null to usb cable.

[francoarab]

thx man i ll try to see if works

[kadnor]

[



















Hi KEVIN,

I would be most grateful if you would kindly study the possibility of helping me in the correct parameters to utilize in order to
get some channels from Sat Eu W2M @ 10*EAST.

The C band channels are 3927 R 8300 5/6 8PSK,
I Can manage from SET UP to Service searching.
4 days struggling to get these channels,I come to the conclusion that my prescan parameters are not correct, they generate a SNR 0 , AGC 93 ( signal not locked)

Wish to have a few tips how to proceed from SET UP in order to do it correctly and receive these channels. Am utilising a SATLOOK for precise pointing of 10*E/ele.

Many thanks in anticipation for your assistance.
Best Wishes,
yours respectfully,

kadnor


















=kevin64;441874]hi
what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help[/QUOTE]

[cirrus]

i have the same problem and i hope it work with me

[enalaprin]

Kev

tried the enforcer mate, but now i keep getting ''file too big''
when i select flash to upload the nabilo image....

is my box knackered?

only had it for 2 days! :(

For me too appears "file too big"
Tell how to solve this problem please??

[richies]

DreamUp Mod recongnises the DM800S and shows that it flashes the box. When I enforce flashing an image afterwards, the progress bar is also indicating that it works fine. But after flashing I always have the same problem:
DM800S strats with "Dream Multimedia", the red lamp switches off after ca. 0.5 sec and thats it - nothing happens. Does anyone had the same problem and found a solution to it?

[abualferas]

same thing but no ethernet light in the back of the receiver

[fish77]

DreamUp Mod recongnises the DM800S and shows that it flashes the box. When I enforce flashing an image afterwards, the progress bar is also indicating that it works fine. But after flashing I always have the same problem:
DM800S strats with "Dream Multimedia", the red lamp switches off after ca. 0.5 sec and thats it - nothing happens. Does anyone had the same problem and found a solution to it?

what image are you trying to flash it with?

[dreamboy]

I am a newbie - tried dreamup 1.3.3.5 on my dm800 clone, shows msg "uploading flash-loader" for about a minute and the OLED says DreamMultimedia. When 100% complete DreamUP shows "upload completed, waiting for acknowledge..." and DM800 restarts but comes back with "No CA found". On Dreamup the Flash button never gets enabled.

pls help!

[bubbles69]

you killed it dreamup is only for repair bad flash you use webshell to flash dm800, you mus use the dreamup patched version i posted a few weeks back, that will put box back in flash mode so you can flash via web shell..

[boogie]

you killed it dreamup is only for repair bad flash you use webshell to flash dm800, you mus use the dreamup patched version i posted a few weeks back, that will put box back in flash mode so you can flash via web shell..
sorry to butt in...
so what if the box just doesnt take the flash(cable is good) and doesnt allow webshell edit?...what then?bad sim?i never got either of the two most usual messages via dreamup: no ca / integer..
the progress bar doesnt move.
any ideas appreciated

[bubbles69]

what happens when you try and connect to dreamup with using the patched version, does it see the dm800?

[boogie]

what happens when you try and connect to dreamup with using the patched version, does it see the dm800?
hi bubbles
yeah,no version of dreamup seems to connect(com ports and cable are fine/tested working).in the bottom status bar it never shows up as connected..pulling hair out !lol

[bubbles69]

have you checked the sim make sure it is in properly, if so remove sim see if it does the same..

[boogie]

have you checked the sim make sure it is in properly, if so remove sim see if it does the same..
tried that bubbles.afaik it isnt fried but how can i test it?
if its not that then what else could it be.as others have said the box only shows DREAMBOX MULTIMEDIA And nowt else....
aaaargh!lol


(furthermore - on a side note - im thinking upgrade to ferrari sim you lot been talking about for weeks.but cant find anywhere)

[bubbles69]

Depends if the box does the same thing with sim in and out, it will just be try and error changing the sim, but you need to find out what make processor you have if buying the sim201

[toto2]

Ive triing all the dreamup version :(

[zeubest]

Hi, i'm also stuck with the "is not a valid integrer value

Can't figure how to solve it.

Any ideas ?

Yks.:hmmmm2:

[zeubest]

Problem found :

DreamUp , with certain dreamboxes, needs to have the IP fields filled, even if you don't use your network to flash.
So, I was using a "dummy" pc to flash, not connected, and I simply had to connect it to make DreamUp work normally, without "is not a valid integer value ...

:ridinghorse:

[zenzen555]

Hi,
I have the same problem,
when i connect my DM800 with connect modem i have 'is... integer'
I forced It with openpli image, the result is "too big file"

Can you help me, i need the process and a good image.

Thanks

[mnmnmn111]

it is a very good discussion i have understand everything about flashing thnx duds

[manu99]

hi
what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help



Hi Kevin,
wat does it means if your db is not rocognized by dreamup??
i connect pc to db with null cable, press connect, then power the db n nothing happens!!!
please help

[kaisun]

I faced the same issue. I removed the lan card from the computer and the problem was resolved. I don't know why but it works for me. First, I tried disable the lan card but it did not work.

[gspeedy]

I had same. but for some reason even when using null com port and use network unticked u still have to plug e-net calble to laptop.
hope this helps someone out..

[slavenjovic]

Stucked with DREAM UP and " is not a valid integer value
Is there any solution? Please help.

I installed the wrong image to my dreambox 800hd clone and trying to solve his with dream up v2009, patched by forhike and natas. I get this message: " is not a valid integer value

[thawab]

I foolishly flashed my genuine DM800 with clone image and now have 'ERROR: NO SIM2xx FOUND".
I will try all remedies above and let you know if I succeed.

Thanks to all in advance

[smirnoff_rules]

u sure its not the other way around ? wot did u pay for your dm800 ? not many spend 3 to 4 hundred on these

[thawab]

Yes mine is genuine. I bought it two years ago. It did cost me close to $400.
And yes your solution here, worked for me.
Thanks to Kevin and all who participated with helpful clues as they try and come back with their findings.

Guys, your all are awesome. Thanks a million.

[waj_uk]

i have the same problem but mine is a clone, i have tried a few dreamups none work the only one that did anything was a forhike and natas patched and when connected it says uploading flash loader and once that is complete it is stuck on "upload complete waiting for acknowledge" what do i do now? dreambox just displays dream multimedia with the red light on
if i disconnect and reconnect goes back to the no sim2xx found error
please help me get it back up and running

[az1982]

hi
what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help

Hi kevin,

I have the same problem. HOw do you mean about in the remote to select a ip you want
thanks in advance

[spacey]

This does not work for me either, selecting an own IP. Trying with the dreambo enforcer now...

[jorgecostacv]

have the same problem give this error " is not a valid integar value"

[rschin]

Can this also with DM800se? that use USB and with the driver you get com6

[seenx]

Downloaded that Dreamup and try to test it :)

[aca2775]

thanks a lot


im having the same problem. what was the problem actual? previously dreamup1.3.3.4 will do.

[DBTraitor]

Web browser flashing is the best for 800HD

[shumi]

Hi guys. I have a D.B.800se HD original. I was flushing a new image and now I get the message on the front OSD saying Ro1: no ca found. My box does not have a nini flushup on the back. tried to use dream up, but doesn't connect, tried even the browser connection and always get the same message, no ca found. Any suggestions please.
Thanks in advance
Arghur

[hakkou]

think you so mush

[dreamboxjohnny]

Hello. I am new user here. I have dreambox 800hd with 1 year i have flashed it a few times but now i have no ca found on front of box. It happen 3 days ago and i trying to fix it since then.

I have followed all the posts downloaded all the different software's and still no good. I downloaded software from here and follwed all steps. But i think my null cable is not connecting to dreambox beacuse when i use the repair part of program that error does not come up on screen.

Has anyone had this problem and solved it. And if i disconnect null modem and press connect it says power on dreambox but i dont have any connection going to box because just to check i untick network also. All help needed please.

[smoggie]

most common problem is down to the wrong drivers if you are using the usb adaptor. Best way is to use a dedicated com port on an old pc/laptop

[dreamboxjohnny]

I tryed using old pc with window 2000 but i could not connect that then to my internet. It is one problem after another

[acex]

i'm the newbie here, my dreambox still have the error "R01: No CA Found in dreambox"
i did read thru all the steps even did try but still unable to get restore .. might my steps wrong im not sure. can anyone here provide the steps by steps gudie .. thanks and really appreciated.

[kengolfer]

What do you do if you have bricked your DM & have no serial port on your box. I've read you camn use the min usb?

Does anyone know how.

Please help.

Thanks

[gsmtech]

What do you do if you have bricked your DM & have no serial port on your box. I've read you camn use the min usb?

Does anyone know how.

Please help.

Thanks

yes on a dm800se you use mini usb and the service port at the back of the box. With a sim2 clone you use sunray flashup software with the usb cable for recovery.

Sent from my GT-I9300 using Tapatalk 2

[yamar1]

i bought a com port card off ebay and installed it into a spare slot on my desktop pc, works a treat with dreamup, around a fiver.

[danijel79]

thank you.it work

[Stardust Dreamer]

Oh! Finally found people chatting about bricked 800HD in English. My box is genuine and work well until it was flash with Nabilosat E2 Black Hole v0.12. My problem appears unique, in that the box worked fine but it would not allow me to connect to the box via the Webinterface. I found this out when I wanted to experiment with other images. And when it was not seen by Dreambox control center E2 {Error 1057 in function Send Socket is not connected} I could download add-ons via the box so it was on the net. Network setup showed that the box saw the router on the network and all parameters were ok. But it acted as if behind a firewall. Then I tried the serial port method, no response. [null modem cable/dreamup 1339] Eliminated cable or dreamup by getting the same setup to work with a DM500c box and Viewsat 2000 box so cables connections are correct.
The shit hit the fan when I connected a hard_drive. It bootup until it got to load enigma2 then just continue to do so with different colours on each reboot.
Never ask if something could get worse, it usually does. Any ideas?

[manutdawy]

I have CA not found problem, and when I use dream up with null cable, it just says "failed flashing (crc 002 error), your dreambox is now unusable, any help please?

[stew86]

found a software called NCF SIM2 v2.5 run software and put your image on it should work

[Stardust Dreamer]

I have used dreamup and other programs flash my 800HD box with the same results. The box doesn***8217;t respond the null-cable at all. My box is an original Dream Multimedia box with S\mcard A2p installed that is glued in by the manufactures. If the cable is attached the screen goes blank and the ethernet lights stays on with out blinking. Dreamup seen to help clone box why not mine an original box?

[dalir]

After "CA not found" I connect my DM800 SE HD clone and get message: "waiting for acknowledge". It is stop on it.
Any help?

[Wolfair]

Got the same issue

[icke123]

same problem here with DM8000. Ill try now with enforcer.

[andy91]

Would help most of you if you started your own thread and forum members would be able to follow the thread instead of posting over other members threads.
All the answers are on the forum if you use the search button.

Andy.