help immo clio 1.2 8v

[sebastian]

Hello, I need drum cli 1.2 8v with immo off
S110115000
8200162378
sirius32n

Thank you

Sebastian:help:

[sebastian]

Please it helps with this

[busaman]

what year is the car.

[cammy25]

I have the same

Busaman do you have immo off for 1.2 twingo/clio dump?
year is 1998.

[busaman]

try this guys.and cutt immo wire before you plug in ecu.

[sebastian]

:dontknow:Este fichero que hizo este gran a 0000:help:

[sebastian]

The clio is of the year 2001

[cammy25]

Im sorry Busaman ,but check the file with hexeditor.

Looks like an eeprom of a DCI but pasted in BIG 00000 file.

[busaman]

ive not time to check them today it must have been mixed up somehow try this one.please let me know if this works i must have put it in the wrong folder.

[cammy25]

Its same file again.:dontknow:

[cammy25]

In this thread from Adam i see the immo off files for 1.2 ,but i downloaded the files and could not find any.

http://www.digital-kaos.co.uk/forums/f115/immo-off-virgin-ecu-database-82099/




Renault Clio 1.4 16V SIRIUS 34 - im*o OFF
RENAULT CLIO SIEMENS BVM 7700103733 - im*o OFF
RENAULT CLIO II 1.9 DTI BOSCH 0 281 010 787-im*o OFF
RENAULT Kangoo 1.4 SIRIUS 32 - im*o OFF
Renault Laguna 1,8 SIEMENS BVM - im*o OFF
RENAULT SAGEM TMS374 SAFIR ECU
Renault Twingo 1.2 SIRIUS 32 - im*o OFF

[busaman]

try this as before i have no time to cross check today.

[valty]

Hello ,

This Ecu, you need make inmo emulator . and work fine ..

B.r.

[sebastian]

code para rar.

[busaman]

pass = suzuki

[sebastian]

no Suzuki ................

[busaman]

all lower case.? this has no pass

[hamza338]

I THANK YOU SPEND YOUR TIME; OFF DON't exist put an emulator or prog a new key

[busaman]

Digital Kaos (http://www.digital-kaos.co.uk/forums/attachments/f115/8729d1261989999-renault-scenic-1-6-16v-im*o-off-sirius32n-im*o-off.rar)

found it cut pin 58

[sebastian]

If it cuts pins 58 .

[busaman]

you need to cut the wire to pin 58 immo line

[sebastian]

ok ok ok bien bien funciona:devil::devil::devil:gracias

[busaman]

at last sorry about the mixed up files they are now sorted until the next computer crash.

[sebastian]

I HAVE A PROBLEM WITH THE CLIO ALREADY IT(HE,SHE) STARTS(EXTRACTS) BUT THE FILE I BELIEVE THAT IT IS NOT THE GOOD ONE COMPLETELY THE CAR BACKFIRES A BIT IN FALL EXCUSES FOR MY ENGLIS
SIRIUS 32N
S110115000
8200162378
gracias

[busaman]

was it ok to start with or did you have a problem straight away.

[sebastian]

Hello the car sticks pulls

[busaman]

was it ok to start with if it was then you have another problem are there any fault codes.

[sebastian]

busaman no codes

[busaman]

Hello the car sticks pulls

was it like that after immo off or did it happen later.

[Gallego]

ok ok ok bien bien funciona:devil::devil::devil:gracias


Hello Sebastian ,

Please contact me, i have problem to make inmo this same ecu.

br. to Galicia

[teerak2uk]

Hi does anyone hae the solution for this and is it stored in ecu or bcu

[adam28]

Hi does anyone hae the solution for this and is it stored in ecu or bcu


Its stored in the 29F200 in the ECU for sirius 32n

Cheers

[teerak2uk]

Hi and thanks adam what sort of a job is it to do with xprog-m (have you done it) and does a wire need to be cut?

[adam28]

Hi and thanks adam what sort of a job is it to do with xprog-m (have you done it) and does a wire need to be cut?

you cut wire to pin 58 of ecu plug. I have done it mate,but you wont do it with xprog m. Its a flash eeprom.
Read through this start to finish. You may find it quite interesting.
http://www.digital-kaos.co.uk/forums/f115/immo-off-help-29f200-73302/
Cheers mate

[teerak2uk]

you cut wire to pin 58 of ecu plug. I have done it mate,but you wont do it with xprog m. Its a flash eeprom.
Read through this start to finish. You may find it quite interesting. http://www.digital-kaos.co.uk/forums/f115/im*o-off-help-29f200-73302/

Cheers mate


your link is to main page of forum?

but what will do it going to get can clip as i need it anyway for programming bcu etc but dont think the clip will do this

[adam28]

your link is to main page of forum?

but what will do it going to get can clip as i need it anyway for programming bcu etc but dont think the clip will do this

Clip wont do it mate.

type this im*o off help for 29F200

in the search tab for finding my thread

[racin-snake]

i use renault decoder on all these im*os then put emulator on the coded wire
on 32 it does without but never tried on 32n does it work without decoder on 32n ?
as it would save the money for emulator ?
also does anyone know of a good suplier of emulator in the uk ?
cheers guys

[teerak2uk]

i use renault decoder on all these im*os then put emulator on the coded wire
on 32 it does without but never tried on 32n does it work without decoder on 32n ?
as it would save the money for emulator ?
also does anyone know of a good suplier of emulator in the uk ?
cheers guys

where did you get your decoder from

[adam28]

i use renault decoder on all these im*os then put emulator on the coded wire
on 32 it does without but never tried on 32n does it work without decoder on 32n ?
as it would save the money for emulator ?
also does anyone know of a good suplier of emulator in the uk ?
cheers guys

I done a 32n without emulator and works.You can get emulator from here in UK i have one from here.Renault Repair Renault immo emulator (http://www.tek-tronics.co.uk/product_info.php?cPath=34&products_id=80)
They sell the decoder too.

[racin-snake]

i got my decoder from here
Renault - IMMO (http://www.codecard.lt/immo/renault/cat_19.html)
i also go two emulators but at 50 euros adams choice is far better
thanks for the info Adam ive never done a 32n without
but will try next one

[teerak2uk]

so by the looks of it you need the emuator and the decoder box

[wizz2c]

so by the looks of it you need the emuator and the decoder box


try this file

[teerak2uk]

try this file


what prog did you use to read/write this file and will it still need an emulator

[wizz2c]

what prog did you use to read/write this file and will it still need an emulator


sorry never used this its part of my decode kit from auto ecu.
post pic of the chip or the numbers on the top i can tell you what programmer is ok

[teerak2uk]

sorry never used this its part of my decode kit from auto ecu.
post pic of the chip or the numbers on the top i can tell you what programmer is ok


ok thanks will post it tomorrow but you may be able to advise on other options because the problem is have no driver electric window so got another bcu then all works fine but wont start

[wizz2c]

ok thanks will post it tomorrow but you may be able to advise on other options because the problem is have no driver electric window so got another bcu then all works fine but wont start


ok eeprom is 29f200 44 pin, i would use dataman 48pro as its the only progger i got with enough pins. all depends on what proggers you have.

hope this helps

[teerak2uk]

only xprog-m

[wizz2c]

only xprog-m

Just had a look at the X-PROG software and the manual and there is no mention of this type of prom ,

[nutloose]

I had one of these recently. (Sirius32n)

The immo PIN is stored in the HC05 in the UCH (52 pin QFP)
Zedbull read the removed micro and gave PIN and would make transponder from dump.

The IC in the ECU was a 29f200 and I didn't have anything to read/program it.

I decoded ECU and fitted an emulator, cutting UCH-ECU line on pin 58.

According to someone that knows lots more about this, if you decode the ECU and dont show it a valid immo signal and it still runs the EEPROM is corrupted and will not store fault codes for future problems.

[wizz2c]

I had one of these recently. (Sirius32n)

The im*o PIN is stored in the HC05 in the UCH (52 pin QFP)
Zedbull read the removed micro and gave PIN and would make transponder from dump.

The IC in the ECU was a 29f200 and I didn't have anything to read/program it.

I decoded ECU and fitted an emulator, cutting UCH-ECU line on pin 58.

According to someone that knows lots more about this, if you decode the ECU and dont show it a valid im*o signal and it still runs the EEPROM is corrupted and will not store fault codes for future problems.

thats really interesting , never had to immo off on sirius 32n yet cant wait yo test this out .:jiggin:

[adam28]

ok thanks will post it tomorrow but you may be able to advise on other options because the problem is have no driver electric window so got another bcu then all works fine but wont start

I have 2 tested and working dumps with no emulator needed for 32n. They were used on a 1.4 16v and a 1.2 8v both worked by just cutting the wire that goes to pin 58 of the ecu plug. These were used on clio's
You must cut wire(58) before you put the decoded ecu back in the car.Or all work will be Fcuked.

Cheers

[PierreTheron]

How do you desolder the 29f200 chip on this board.
Will the plastic around the tracks melt?
Thanks in advance
Pierre
Renau clio 1.4 rt 2000model.
Vin vf1bbosof21133812:cheer:
Tried desoldering on stuffed ecu.
A desolder station really worked great here.
No damage to rest of board.
Anyway i found my fault on this vehicle today.
Opened up wiring harness and found acid corroded wire connecting pin 30 on ecu to fuse 3 .
When ecu disconnected still had power on pin 30.
Under load power falls away.