View Full Version : code for radio opel cdr 500
doctorelectrical
6th March, 2010, 06:53 PM
I need a radio code for opel
mark philips
Model: CDR500
eeprom 24C16
arturkob
6th March, 2010, 07:08 PM
Hi, code is 3179
zvasile
6th March, 2010, 07:08 PM
-----3179----
doctorelectrical
7th March, 2010, 10:11 PM
thank
the code works perfectly
tarekdj
9th June, 2010, 11:51 PM
anybody can help me with a code for DELCO CDR500 E
1500Y9354913 ?
cfgebel
10th June, 2010, 12:01 AM
read dump and post
Pilot166
14th June, 2010, 06:17 PM
I need a radio code for opel
VDO 326559176
No:24469302
TYPE:CDR 500 (E)
2F4
thank
daveork
14th June, 2010, 09:10 PM
Could anyone supply a code for CDR500 (E), serial number GM 495086337? Would appreciate it...
tomitomass
14th June, 2010, 09:11 PM
tarekdj. Delco cdr500 works with licznik USB4.8 end simpli k-line interface.
nightrider77
9th July, 2010, 06:11 PM
Hi,
On my CDR 500 appears SAFE,
if I start it with AS pressed, appears 7 SAFE
and I can't enter the code.
I kept it ON for about 7 hours for the security timer to reset, but nothing.
Does' somebody know how to reset the security timer to be able to enter the code?
Thank you
Sisvet
4th August, 2010, 08:03 PM
Hi. I need a code for opel.
GM Delco Electronics CDR500
No 09136107
GM 1500Y9390456
Sorry for my mistakes, Im new in this forum.
hersh123
1st December, 2010, 03:16 PM
I need a radio code for opel
fukukum
1st December, 2010, 05:05 PM
anybody can help me with a code for DELCO CDR500 E
1500Y9354913 ?
not serial read tms370 send forum
Fradebo
1st December, 2010, 05:43 PM
FOR NIGHTRIDER
7 SAFE CORRESPONDS WITH ABOUT 30 MINUTES OF WAITING TIME.
PINS 7 AND PIN 4 SHOULD HAVE 12V ALL THE TIME SO LEAVE THE CONTACT ON.
THERE IS NO TRICK TO RESET THE COUNTER ON THE RADIO ITSELF
GRTZ FRADEBO
med79
26th February, 2012, 02:14 PM
hello,i need to decode a cdr 500 (delco) with m27c256 chip and a car 300 (blaupunkt) with a 24c016 chip.I tray the 0000 for cdr 500 and 3420 for the car 300 but no succes.this radious send me to the next SAFE.tanks
zabra
26th February, 2012, 02:56 PM
code is not in eeprom ,read mcu for both radios
bogege
26th February, 2012, 03:39 PM
hello,i need to decode a cdr 500 (delco) with m27c256 chip and a car 300 (blaupunkt) with a 24c016 chip.I tray the 0000 for cdr 500 and 3420 for the car 300 but no succes.this radious send me to the next SAFE.tanks
For car 300 try code 0224 from serial number!!!:stupid:
med79
26th February, 2012, 06:34 PM
ok,i try this tomorrow ,tanks
med79
27th February, 2012, 10:37 AM
indeed,i read the mcu with x prog m,the code is 0224 for the car 300
med79
27th February, 2012, 08:25 PM
This is the bin of both radio
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.