[juslovingit]

If you have already installed a USB-to-Serial converter and the Florida Probe freezes in the calibration routine, you will need to download this replacement driver file: ser2pl.sys
This file must be placed into the C:\Windows\System32\Drivers folder for Windows XP, ME or into the C:\WINNT\system32\drivers folder for Windows NT, 2000. Windows will ask if you want to replace an already existing file with that same name in the destination folder. It will show that the file you are replacing is smaller than the file downloaded here. Click 'yes' and restart your computer.

[benny/9]

for anyone who needs this info and drivers for a usb to serial converter here are the drivers for both XP and VISTA. make sure you use the correct file for your computer O/S
*******************************************
usb to serial convertor
this is a driver file for a [usb to serial convertor]
this is to enable you to use a [ laptop without a 9 pin com port] . to use a null modem cable to programme your receiver. it says plug and play on these devices, they dont and you need a driver, so if your device came without a driver disc use this it works 100%.
[1] open and run the driver file with the device unplugged
[2] it might ask you to uninstall old drivers [say yes]
[3] re-start your pc after installed.
[4] connect your usb to serial device.
[5] check in the device manager settings
[ prolific usb to serial com port.-com [1].

[norbert]

Flashed my eurovox yesterday, using the guides the only problem was getting my laptop to use the USB serial and nul modem cable.

As this was a cheep cable from flebay it came with no drivers, after searching for about two hours and trying six or seven I foung the one i needed. thought I would share this as the drivers i found on here did not work for me.

The usb port has the numbers HL-340.The driver can be downloaded from-

http://www.winchiphead.com/download/CH341/CH341SER.ZIP.

I hope saves someone some time.

[RTID75]

Thanks. Had one of these for over a month but not tried to use it until tonight!

[Lanxman]

Digital Kaos - Downloads - Maplin serial conveter

[blazesf]

I have the same problem, gonna try a few of these downloads and post back if i can get it working.

Many thanks

[icoman]

I have the same proablem with these kind of driver rs232 but on the cable it is write HL-2303 and none of the drv. from the cd cable won't install on xp (and i am very experinced with installing driver on xp )

[spiderman01]

There is a few posts with drivers. Which one for the maplin usb please?

[Lanxman]

Originally Posted by spiderman01 There is a few posts with drivers. Which one for the maplin usb please?

Her you go mate.
Digital Kaos - Downloads - Maplin serial converter

[SAM87]

hi, evry1, well i bought a HL RS232 CABLE from internet. when i connect to my laptop its says unknow device. i tried to update the driver but it says window already installed good driver..

i tried so many drivers but cudnt sorted out..
i m using window vista 32bit

can anybody help me out..please

thanks..

[sskhaira08@yahoo.co.uk]

Please install the software first and then plug the cable when asked and follow the instructions....

[sskhaira08@yahoo.co.uk]

Hallo every one ,
Please install the software first and then plug the cable when asked.....

[wilf]

Hi there m8, you need to contact a moderator and get you user name changed this will make you traceable to anyone looking in.

[leetay]

Hi all

Yes I need the drivers too, but you have to post first.

Just thought I'd take this opertunity to intyroduce myself

Cheers

Lee

[leetay]

Originally Posted by reddave Here are the drivers I use.

Hi All

I am trying to get the driver you guys have posted, however, the moderators say I cannot get them, Does anyone know why, do you have to post 15 or so times first.

If so couls someone please PM them to me

Cheers

Lee