[mattydr67]

Originally Posted by manocao i think they do, my chinese v1.2a is recognized as genuine i think your elm327 is not recognized as genuine 'cos it is bluetooth, so different hardware maybe scanmaster proscan etc are not programmed to recognize bluetooth interfaces as genuine

I think you got right if a lot of peaple will say as you and that it ain't a singular case or it's a general one.

[oztiks]

Originally Posted by manocao previous linked ScanMaster-ELM 2.0.101.652.exe by great ipejasinovic, different from the new one here http://www.digital-kaos.co.uk/forums/f104/automotive-software-collection-65195, works great and dont need activation, crack or serial... just install and run its the one i use myself i hope ipejasinovic dont mind i attach it here dont look for another, this is the best and latest! ps: no password needed to unrar file

Many thanks!

[mboer01]

thanks i hope i get this working with a renault 1.9 dci

[Airvan]

Hi Guys!

I´ve donwloaded different versions of Scanmaster ELM, also the demo version of WG-Soft.
But there is one problem: Everytime I get the message "... Lost Bluetooth Connection" and I can´t read any data.
After starting Scanmaster I can connected to my vehicle but after starting to read data i get this error.

The problem should be located in the software or my PC.
I have an OBD Interface which is wokring well with OBDScope on my Smartphone.

Any solutions?

Thanks and best regards
Grand

[mattydr67]

I had a serial number from gUeRRa for ScanmasterElm.
I've just reinstall my windows xp, and now scanmaster show me a difrrent computer Id.
Nobody has a keygen?

[pyrozzuk]

Thanks! :-)

[gUeRRa]

Nobody has a keygen?

as DK veteran you may ask another key for SM via PM w/o problem

[mattydr67]

Originally Posted by gUeRRa as DK veteran you may ask another key for SM via PM w/o problem

Thanks a lot my dear friend, you're the best.
I didn't want to bother you again because you sent me a key before.
My windows worked slowly and I reinstall it and when i want to use your key i saw that is another Id.
Ok i will sent you a PM, and thanks again.

[mattydr67]

Thanks to gUeRRa who sent me a key for SM again.
THE GREATEST M8

[Persia]

hi
i have an elm 327 interface and Scanmaster 2.0 software
can it connect to gearbox or airbag ecu? and read DTC of them?
or only can read engine ecu DTC?

[mattydr67]

Originally Posted by Persia hi i have an elm 327 interface and Scanmaster 2.0 software can it connect to gearbox or airbag ecu? and read DTC of them? or only can read engine ecu DTC?

just ecu and dtc nothing more till now maybe in the future.

[chon_]

Still havin problems with this device, installed device as recommended here, drivers seems ok, but the software (ScanTool 1.2) still can't recognize the device, says port is not configured.
Any ideas?
Thanx in advance

[mattydr67]

Originally Posted by chon_ Still havin problems with this device, installed device as recommended here, drivers seems ok, but the software (ScanTool 1.2) still can't recognize the device, says port is not configured. Any ideas? Thanx in advance

Go to scantool and configure the com port accordig with you device com port.
I mean if your interface is on com port 1 then configure you sw settings to be on same com port
to see what com port is used by your interface go to the Device Manager.

[manocao]

Originally Posted by chon_ Still havin problems with this device, installed device as recommended here, drivers seems ok, but the software (ScanTool 1.2) still can't recognize the device, says port is not configured. Any ideas? Thanx in advance

com port must be configured the same in scantool as in device manager/com ports/usb serial port

first, read this installing drivers of an interface and this VAUXCHECK FOR YOU ALL

then, use newer software for elm327 (scantool 1.3 and more) here Automotive Software Collection by manocao

[chon_]

Originally Posted by mattydr67 Go to scantool and configure the com port accordig with you device com port. I mean if your interface is on com port 1 then configure you sw settings to be on same com port to see what com port is used by your interface go to the Device Manager.

Did that, but the program says "Interface not found"