im having problems watching one channel while recoding another. i have sky ...
im having problems watching one channel while recoding another. i have sky uk dish with one cable connected to the back. in the config i have set tuner a to sky uk simple and tuner b to loop.
wat about if i get a splitter and put cables into both tuners will that be ok?
m8 it will not work like that you need 2 separate feeds to record different channels at same time what your doing will only let you record what your watching or same transponder
digi you beat me to it
i will let you explain he needs a twin lnb with 2 cables
Last edited by potrobber; 1st May, 2012 at 10:21 PM.
well i cant do that becuase it will mess up our room as we have wooden floors. anyway i just got box for this reason but i may aswel sell it now
You can replace the existing wire with a shotgun cable, which is more or less the same size as a single cable . as said above you will need a dual/quad lnb[5-7£ on ebay]
I spoke to my local sky dish installer and he sed u wil need a new dish as my current one is too old. He sed it wil cost £40 for dish with quad lnb and double cable fitting included
Im sorry mate but most installers are just out to take you for a mug. in almost all cases you will just need to replace the lnb and run dual or shotgun coax in place of the existing single coax.
for example one of my own zone 2 sky minidishes is almost 8 years old and all i did was replace the old single feed lnb with a octo ( 8 feed ) lnb and new coax runs.
there was absolutely no need or a new dish.
it will cost £40 for dish with quad lnb and double cable fitting included
if he is doing all this for 40 quid i would jump at it if i was you
i cant see where he is making any money are you sure thats for all you have said inc fitting?
i know very cheap i phoned him again to confirm and he said everything is included even the fitting so im going to book him when weathers better
Bookmarks