New sim2 ssl 84 for dm800(sim201 and sim210 cards)

**mfaraj57** · 28th October, 2011, 01:56 PM

New sim2 ssl 84 for dm800(sim201 and sim210 cards)

Sim2 released new sim2 second stage bootloader for dm800hd within the plan of continuous support for all sim products
The new sim2 ssl 84 enables users to use original images with genuine drivers without modification on all types of sim2 dm800 boxes
Also sim2 annouced that the new sim2 ssl 84 supports both sim2 card types for dm800hd(sim201 and sim201) and this proved all what said about stopping support for sim201 cards are totally wrong.
Although the new ssl gives complete solution for sim2 dm800hd but there are some minor issues not resolved yet such webinterface ,wlan and software managers,however these issue could be fixed easily with available patches.
also expected problems will be with few images like edg nemesis and oozoon images and in this case sim2 advice users to use already patched images.

How to use new sim2 ssl 84

-Flashing original images.
1- load sim2 ssl84 to dreambox in setup mode by dreamup or internet explorer method then reboot the dreambox to setup mode again to activate the new ssl
2- Flash the original image by dreamup or internet explorer methods
3- without rebooting the dreambox flash again the sim2 ssl84 immediatley
4-reboot the dreambox .

-Flashing already patched images with sim2 ssl84
just flash the image with dreamup or internet explorer method without loading sim2 ssl84 whatever the current ssl version loaded to dreambox

-Updating already flashed image with sim2 ssl84
we do not advice to update images in normal cases but for accidental updating we advice installation of new sim2 ssl 84.ipk before restrating the dreambox after finihsing update process

for multiboot backup and osd flash image backup better to use sim2barryallen 4 and TSFlashbackup 4 which be available as soon as possible

sim2 ssl 84 dm800hd should be used with the specified sim2 model,sim2 neither me are not responisble for any damage could occur from improper use.

download

**bobdeville** · 28th October, 2011, 02:58 PM

... just to be 100% sure: I have DM800HD PVR (clone) with SSL82; I can use/upgrade to SSL84?
Thank you in advance!!!

**mfaraj57** · 28th October, 2011, 04:06 PM

Originally Posted by bobdeville

... just to be 100% sure: I have DM800HD PVR (clone) with SSL82; I can use/upgrade to SSL84?
Thank you in advance!!!

if it is sim2 (sim201 or sim210 cards),yes you can

**lombard** · 28th October, 2011, 04:28 PM

Hi i have openpli 2.1 on dm800se and dm800pro, i cant back image up with TSFlashbackup 4 would i be able to back them up ?

Thanks

**bobdeville** · 28th October, 2011, 05:51 PM

thank you for reply.
Yes, my clone is sim 201, SSL 82, model DM800HD PVR.
The only thing that I'm not sure that I really understand is the point 1), from how to use new sim2 ssl 84, how exactly to load the new SSL84 onto my SSL82 box.
Which one of files should be used in step 1), sim201_ssl84.bin or sim201_ssl84.nfi ?
I want to use an original image.
Best regards.

Bob

**sujee776** · 28th October, 2011, 10:37 PM

i have the same question as bobdeville. im on ssl 82 using newengima 2. i noticed that newengima for ssl84 is out so how do i upgrade to that.

2. could you tell me whats the difference its going to make if upgrade thanks in advance guyz

**mfaraj57** · 29th October, 2011, 11:18 AM

Originally Posted by lombard

Hi i have openpli 2.1 on dm800se and dm800pro, i cant back image up with TSFlashbackup 4 would i be able to back them up ?

Thanks

difficult to backup openpli with any tool due to different structure,the only way to use it in multiboot and backup with barry allen or satisfy by save settings if used in flash

**mfaraj57** · 29th October, 2011, 11:21 AM

if you have sim2 image with new ssl84 then flash it normally by internet explorer method and the bootloader will be upgraded to ss84
if you want to flash original image follow the procedure in first post and use nfi file for flashing

**bobdeville** · 29th October, 2011, 11:29 AM

Originally Posted by mfaraj57

if you have sim2 image with new ssl84 then flash it normally by internet explorer method and the bootloader will be upgraded to ss84
if you want to flash original image follow the procedure in first post and use nfi file for flashing

Can I upgrade my box to SSL84, via browser, and let the actual image I use? - will be some improvements?

**mfaraj57** · 29th October, 2011, 11:52 AM

Originally Posted by bobdeville

Can I upgrade my box to SSL84, via browser, and let the actual image I use? - will be some improvements?

you can upgrade to sim2 ssl84 by browser or by installing sim2-ssl84.ipk through the image(TSpanel-addons-sim2 addons-sim2-secondstage)
preferable to use ssl84 with latest original driver to notice difference and improvement

**bobdeville** · 29th October, 2011, 12:51 PM

Confirm: the update to SSL84, worked like a charm (made thru explorer) !!! Great job!!!

If I will flash my box with latest original firmware, "release-DM800-3.2.0", before reboot that SSL84 must be flashed again?
That image (release-DM800-3.2.0) is a good/stable one or you recomend another one?
All I want is to work: cccam213/sbox0047 combination.
Millions of thanks !!!
Bob

**mfaraj57** · 29th October, 2011, 03:14 PM

Originally Posted by bobdeville

Confirm: the update to SSL84, worked like a charm (made thru explorer) !!! Great job!!!

If I will flash my box with latest original firmware, "release-DM800-3.2.0", before reboot that SSL84 must be flashed again?
That image (release-DM800-3.2.0) is a good/stable one or you recomend another one?
All I want is to work: cccam213/sbox0047 combination.
Millions of thanks !!!
Bob

release dm800 3.2.0 has no emu manager to run cccam213 or other cams
release dm800 3.2.0 has different,new system and closed enigma and contain new protection against clones so mostly new sim2 ssl84 will not solve the protection of this image
we have to wait images from other teams after dmm closed the c++ enigma source against clones and image teams

**fahimjan** · 1st November, 2011, 05:15 AM

I also have the same question as bobdeville had , and i also read all posts of this threat.

I have DM800HD pvr with Sim 2.01 !!
Its better to use SSL84 ?

**freck** · 1st November, 2011, 12:05 PM

Same thing over and over guys.....if its not broke dont fix it....or else you WILL break it and cant fix it.
If your not 100% sure on what your doing just chillax and wait for more info or even a sticky to emerge.
Freck

**mfaraj57** · 1st November, 2011, 06:58 PM

Originally Posted by fahimjan

I also have the same question as bobdeville had , and i also read all posts of this threat.

I have DM800HD pvr with Sim 2.01 !!
Its better to use SSL84 ?

no harmful effect from ssl84 if used properly
but as advice do not update the current image with new ssl84
better to use image with ssl84 built in