Just if anyone has trouble setting up usals, a rough guide below.
In Service Scan, ensure you have...
Bouqet = Satellite-Bouquet
Diseqc = Diseqc 1.2
Fastscan = on
Then "save settings now"
Next, go into Motor Settings.
Ensure you select Use GotoXX = on
Set your lat and long details
Do NOT select anything else, ie leave all the satellites lower down to off
Then select "save settings now".
Then back in service scan menu, select the satellite you want to scan, but DON'T select "save settings now"
Then select scan at the bottom.