[braz13]

Superb guide, faultless
Again always check the hardware, had a dodgey cross over cable took 2 hours to find, once swapped flashed in 10 mins

Thanks thanks thanks

[kievnov]

HI I am new to this ..I bought a dreambox .. i connected it ... it only has the freeview ... I want watch Sky Movies and Sentanta Channel. But I don't know how to update the keys.

I manage to setup the IP onto the dreambox and connect it to the pc via the router and get the FLASHFXP connected.

I need a guide to update the keys step by step .. Please help

thanks

[CHRISTOF]

read tutorials in downloads section bud very helpfull im just waiting for my box to arrive then i am having a go.

[CHRISTOF]

Originally Posted by CHRISTOF read tutorials in downloads section bud very helpfull im just waiting for my box to arrive then i am having a go.

looks like i spoke to soon im strugglng to connect box to pc keep getting time out.

[cheekytaz]

thans for yor help xheers

Originally Posted by Devilfish Great guide thommo, thanks. Remember if you've disabled your AU in the camd_cfg file, you'll need to enable it. # AU # 00 is ignored (default) # 01 enable AU # 02 AU Auto A: { 02 } There's a copy of FlashFXP here... Digital Kaos - Downloads - FlashFXP v3.0.2 ---------------------------- Also here's a wee note regarding ip addresses. Cables - if you are connecting the dreambox direct to the PC, you need a 'crossover ethernet cable'. If you are connecting it via a router, a 'standard', 'patch' or 'crossover' ethernet cable can be used. See the attached pic. The circled areas are called the 'subnet'. Think of this as a street name and the last number of the ip address is the house number. The subnet is basically your network address. If you want each device to talk each other, they need to be on the same network, i.e. have the same subnet. So all your devices need to start 192.168.0 or 192.168.1, you can't have both. Chances are your router ip address will be either 192.168.1.1 or 192.168.0.1. The best and easiest way to connect the dreambox to the internet is to connect it to one of the ports on your router. This way the dreambox has access to the internet even when your PC is switched off. If you want to connect it to the net through an additional nic in your PC, you will have to enable internet sharing so that the 2nd nic connects to the net through the 1st nic. It's a pain in the ass so I suggest connecting the dream to your router, if possible. Let's assume you do this. Go back to the pic, in the Gateway: section, you need to put the ip address of your router in here. Your router will be the dreamboxes gateway to the internet and it needs to know where it is. Forget about the nameserver just now, that's used if you have DHCP enabled. For exmaple... Router - 192.168.1.1 PC - 192.168.1.2 Dream - 192.168.1.3 Laptop1 - 192.168.1.4 Laptop2 - 192.168.1.5 Gaming adapter for 360 - 192.168.1.6 etc etc etc...you get the idea. Each device is a house on your street. If you're not sure what your router ip address is, open your browser and start typing in the following ip addresses one by one. The one that brings up a username and password box is the routers ip address. 192.168.0.1 192.168.1.1 192.168.2.1 If you're conencting the dreambox direct to your PC, you don't need to put anything in the Gateway or Nameserver sections, leave these blank. You only need to make sure that the dreambox and PC are on the same subnet and also have a different last number. For example, Dreambox - 192.168.1.5 PC - 192.168.1.6 To change the ip address of your network, you need to go to: Control Panel Network Connections right click on network adapter and select properties Select the TCP/IP tab and select properties Usually if you use that ethernet port on your PC for the internet, in this page, the 'Obtain an IP address automatically' will be checked. You need to choose the next option down from this 'Assign an IP address'. Enter in the IP address in the example above. Then go to your dreambox and enter in the dreambox example above and reboot the dream. All going well you should now get a connection when you connect using your ftp program. Hope this helps.

[jonnboy]

not really sure what rom files im supposed tb transfering ,help please. so far ive set up the flashfxp,box is up and running im stuck now .(i have the files 10,11,7) 3 times thats why im confused. i think ive transfered them but the channels are still missing ,so maybe ive done it wrong.
thanks Jon

[tech51]

Many thanks, I'll have a good read and attempt to ftp the rom fix to the box. Really new to all this but I did manage to flash an image to the thing just not sure of what I need to do to get all channels, I'll follow your advice and hope I manage.
I can't thank you enough for the info.

Tommy:

[Teddy3943]

Hi m8,
I use the DCC ftp I can see both the box directories and my pc directories, but when I want to transfer a new bin directory in the /var it says: cannot make a new directory. Also when I use telnet and go to /var I don't know how to create a new directory where I could send files into.

And another thing is: how I can add mgcamd to my DM800 HD?

[mr.mojorisin]

stuck..again.
got 2 dm500c boxes.
first one flashed ok with dk1.1 and then ftp'd files over.no probs.
second one flashed ok but can't connect via ftp.
network settings are ok.firewall off.all cables work.
have reflashed twice and also tried other image.same problem.
Any help would be much appreciated
...and someone said this was easy...

[owen7]

*Deleted* i have Flashed ok now!

[hoffmann]

Hi!!
Excellent program!!
sds
hoffmann

[paca]

hi my friends

today i have try flash fxp to do something wrote ip of to receiver user and pass and click nothing happend

what kind of ip. i should give to dreambox.
pc:192.168.2.2 w.router:192.168.2.1 dreambox :? cable 15 m long is this the problem?

thanks

[Novac]

In my eagerness to get on board with the DK image I flashed with dreamup but forgot to back up my cam and emulator. Question: Do I need a specific Cam and Emu to work with DK_V1 or will any cam & emu suffice . I know that instructions exist on the site but could one of you good people point me in the right direction.
Its a Dreambox500c I am trying to sort out
Thanks in anticipation........

........Late breaking news all sorted Start by reading the Guides & tutorials and follow them to the letter.
Thanks go to Shady77 for the Total Spoonfed Newbies guide for putting me on the right track
Thanks to Thommo and Devilfish for their hard work that Shady collimated.

[DanXan]

I just got me dreambox and cant find a null cable anywhere in my house even though i know i got 1 :/

Anyways i conected to it nps following ya guide but in Var there r no keys is that cause its new or .. ? and what do i flash it with iam getting no channels atm both servers come up with nothing found.

TIA

[DanXan]

forget my last post i played about used ya mint dk1 file thing found keys then updated again. Wow first time ive tried and it worked just goes to show all the good work u guys have dun thnx a lot.