install evocamd 2.12

**smoggie** · 08:32 PM

just got my 600c .i have got free channels and have copied over service files and files into keys folder/scce folder. i now need to install evocamd. i inderstand that it is sent over to temp folder but when i go to manual install i dont see it to install Is this the correct file to transfer?

**Curious123**

You didn't say which image you are using but most images have a download server from which you can download the cam and install directly onto your box. If you have downloaded the cam of the internet in a 'tar' file than you can ftp it var/tmp on your box and it will then install into the correct directories on dm600c.

**smoggie**

hi,
its the PLI jade image i have on. I have read this thread here Evocamd 2.17c
when i unzip the file and locate in flashxp it shows as a winrar file tbz2. if i transfer this across to temp folder and then on remote go to software management>manual install there is no file to select.
I have tried to connect it to the internet straight to my modem, browsed for ip addy and put that in as gateway but no luck yet.
I am right in asssuming that a X in the box for enable network and dhcp means they are enabled in the network settings??

**cgscott** · 05:58 PM

Evocam 2.17 doesnt work with my box.

Ex tw in edinburgh

**smoggie**

i cant get it installed, to find out if it works for me

**smoggie**

All sorted now,connected to internet through router. wouldnt work at first as the cable i have hard wired from front to back bedroom is for some reason now faulty(never used it for awhile).Took router and connected to modem in front bedroom and connected straight away and downloaded evocam 2.14. transferred services/bouquets etc and made a back up of enigma folder for safe keeping.Just need to back image up to pc now.

them X's do mean enabled, would have made more sense for them to be ticks....or is it just me being thick?

**Curious123**

If you are not too sure about how to connect your dreambox to the internet than it is better to leave the 'x' enabled otherwise you can do it manually if you know what you are doing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Evocamd 2.17c	Devilfish	Cable Dreambox	69	7th February, 2010 12:18 AM
evocamd 2.12	skeel	Dbox2	8	21st January, 2009 05:11 PM
evocamd	smokie69	Cable Dreambox	3	24th December, 2008 10:43 AM
DM500 DW V2.0 & Evocamd 2.12	Dazzonamission	Cable Dreambox	4	16th October, 2008 03:55 PM
evocamd 2.14	thevman2k3	Cable Dreambox	4	4th September, 2008 11:26 AM

smoggie DK Veteran Join Date: Jul 2008 Posts: 346 Thanks: 39 Thanked 57 Times in 52 Posts Downloads: 39 Uploads: 3	install evocamd 2.12 just got my 600c .i have got free channels and have copied over service files and files into keys folder/scce folder. i now need to install evocamd. i inderstand that it is sent over to temp folder but when i go to manual install i dont see it to install Is this the correct file to transfer? Last edited by smoggie; 30th September, 2008 at 08:32 PM.

Curious123 V.I.P. Member Join Date: Apr 2008 Posts: 2,123 Thanks: 39 Thanked 518 Times in 443 Posts Downloads: 46 Uploads: 0	You didn't say which image you are using but most images have a download server from which you can download the cam and install directly onto your box. If you have downloaded the cam of the internet in a 'tar' file than you can ftp it var/tmp on your box and it will then install into the correct directories on dm600c.

cgscott V.I.P. Member Join Date: Jul 2008 Location: Edinburgh Receivers: DM500c DM500s Posts: 1,823 Thanks: 108 Thanked 522 Times in 409 Posts Recipes: 1 Downloads: 104 Uploads: 9	Evocam 2.17 doesnt work with my box. Ex tw in edinburgh __________________ Patience is a virtue. http://www.youtube.com/watch?v=bRgAvCgUdZQ Last edited by cgscott; 1st October, 2008 at 05:58 PM.