IC88 cards hs 14pin interface. of that you read earlier post where the 6 connecting pins are. (JPG was attached)
I repeat the 6 pins required are:
1) VCC +5volts
3) Reset (rst)
4) SCK (clock)
5) Miso (serial output)
6) Mosi (serial input).
IC88 is AVR MICROs Atmega88 or 88v. Dont need hardware, just use Ponyprog>AVR Micro> Atmega88 to load and read my dump. I hv put flash and eeprom in 1 file, PonyProg will auto detect Flash and Eeprom.