[ukjimmy31]

null modem cable came today, start up dreamup.exe connect to pc and db, click connect, nothing

the green light stays on, after a bad flash. when it loads via tv all it does is load the DK logo and resets, have been told to flash via null modem cable all it says is connection prepared, now switch on dreambox, and doesnt do anything else

any ideas please folks

problem sorted How to kill your dreambox on the first day its all on there

[cgscott]

Try diff com ports.

Dont have your DB powered up when u put the null cable in.

[ukjimmy31]

i only have one

yeah all cables disconnected execpt null, start up dreamup, click connect, put power lead in, light comes on, and dreamup does nothing

[cgscott]

OK thats fine. Start from the start then. Use serial cable and connect to box with it powered off.

Then start dreamup v. whatever.

And communicate with the box..

[bugaloo41]

I note a few people have the same problems when using dreamup. Follow the instructions to the letter and you should be fine. Make sure "use network" option is unchecked.

[ukjimmy31]

only cable i got is the null, any other thing i can do?

[cgscott]

Just untick use network and see what hapens mate.

If you upload make sure you click no to flash erase..

[ukjimmy31]

ok tried all that, is there any other way, or has anyone had the same problem, so i know weather to bin it or not,

[bugaloo41]

Jimmy I am sure you have tried this but make sure you do everything in order

1) Disconnect ALL the cables from your Dreambox
2) Plug one end of the null modem cable into your PC (into a COM port)
3) Plug the other end into the back of the Dreambox
4) Load DreamUp on your PC.
5) If it appears in German, switch the language by pressing Language -> English
6) Select which serial port you are using from the drop-down menu.
7) Make sure “use network” is unchecked
8) Press connect.
9) Now plug the Dreambox into the mains and make sure it is switched on. If
everything is working right you should get a blue progress bar appearing within a
second or two. After the bar finishes, you should have the message “Box attached and
ready” beside status. You are now ready to flash. (one thing to note here is that the
first version of DreamUp I tried did nothing at this point, I had to update to the newer
version for this to work)
10) Press the flash button and select the image you want to flash to the box.
11) Select yes (“Ja”) when asked if you want to perform a flash-erase during the
process
12) The flashing process will now begin

[ukjimmy31]

yeap and again just to make sure

How to kill your dreambox on the first day

ok if you would like to know how to do this check the post above

just doesnt connect mate

[alliv]

on the dreamup prog you should see an option to change serial port [top left]
on the drop down menu try each option. or if you know how to look in device manager to see what comport the null modem cable is on, then change the dreamup option to same.

[ukjimmy31]

there was only 1 option in the box anyway sorted it see How to kill your dreambox on the first day but im sure someone will know a better way of writing it in a sticky thanks for ya help tho matey

PROBLEM SORTED

ps cool i am helping others on my first attempt hehehehehehehehe

[jbvid]

Originally Posted by ukjimmy31 yeap and again just to make sure How to kill your dreambox on the first day ok if you would like to know how to do this check the post above just doesnt connect mate

Hi
Have you looked in device manager to see if, and which Com ports are alloocated?, and if several are, have you tried all these in dreamup's dropdown box? Finally can you try it on another PC with a 9pin Com port?
UPDATE: Sorry alliv, you beat me
jbvid

[jbvid]

Originally Posted by ukjimmy31 there was only 1 option in the box anyway sorted it see How to kill your dreambox on the first day but im sure someone will know a better way of writing it in a sticky thanks for ya help tho matey PROBLEM SORTED ps cool i am helping others on my first attempt hehehehehehehehe

Hi
What was it then jimmy?, got me in suspense now?
jbvid

[ukjimmy31]

dont exactly know, but i tried to flash with dcc, and selected usb as well, so as far as i understand, i flashed it and the box thought there was a usb to boot from, hence got so far and restarted, over and over again.

so like i said i used flashwizard, i did try that before but it didnt work, i think that i might of had the ip wrong,

but anyway thats the end of the problem, time or another