1st thing m8 is you need to download and unrar to your desktop the keymaster application. Get it at link below.
### New Keys are HERE!!! ###
when you run keymaster, take a note of the key numbers, there are 2 of them, one begining 00 and one beginning 01
then on remote.
go to tuxbox commander or file manager
a blue screen appears
using the arrow keys go to var/keys
in that section you need to highlight the file you need to change.
If you are using mgcam, then highlight softcam
If you are using evocam then highlight keylist
look for the key begining 00 and highlight it and enter
change the key to what is in the keymaster app. It works like txting on a mobile phone. You only need to alter the digits after 00
when altered press enter
then go to the 01 key and enter
alter key again to what is in keymaster app.
when finished press enter
press back on remote and press red when prompted.
After its up and running and the keys roll again, just use keymaster to get new keys, it will usually only be one of the keys that change, so just go edit it again.