Is it possible? With all of its plug-ins and add ons?...
Is it possible? With all of its plug-ins and add ons?
But, I think DreamUp is for flashing an image. I need to back it up !
After you connect you will see a backup button on she right panel half way up on dreamup.
Thanks guys. I have tried with Telnet, but had many problems.
When I type in telnet:
cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot
I get the error:
-sh: eraseall: not found
I will probably give up and use the DreamUp method instead !
revice the syntax again
Newbirth you just need to do the following..
Go to the RUN command in windows..
type telnet 192.168.x.x (replace the x with the rest of your ip address)
log in with user / pass
cat /dev/mtd/3 > /tmp/backup.img
then use your FTP prog to copy the backup.img to your pc hard drive..
the code you were using.
is to flash an image not the code to back upcd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot
No Guys. I did everything using the code
In telnet I get:cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot
-sh: eraseall: not found
My dreambox is the DB 800 HD. I think this is not working for DM 800 because it does not use .img images
Last edited by NewBirth2010; 15th August, 2009 at 07:44 AM.
these telnet and dreamup will not backup enigma2 images
if using barryallen theres an option to backup image of everything in image
or save your settings via software manager to hdd or usb
then every time you reflash it will pick up your settings channels/bouquets/timers/ip setting/not the cams or plugins
Last edited by westkill; 16th August, 2009 at 02:16 PM.
dm800-s=dm7025-sc=dm800 clone=1.1 m triax dish=titanium twin lnb
DIGITAL KAOS BEST SITE ON THE NET
please use the thanks button if someone has helped
how to flash dual unlooper
I do not have a dm800 my box is dm600 but this plugin work fine for me. Try this plugin on your box and see what happens;
I tried it Curious123.
It does not work in DB800.
I lost my null modem serial cable, But I think it is possible to back the DB 800 HD up, using DreamUp.
if i make a back up using dream up cuold i flash this to another box and receive all channells etc and not have to set up the box
Dream up will not back up dm800 image
the only way by using barry allen either from dream or through dcc
You may succeed in taking backup by dream up or by internet explorer in setup mode but no garrante you can restore successfully