[icewater]

Hi Guys,

My DM500S is permanently on standby no matter what i try i can't get it to power on.
I can flash/erase firmware with dreamup i can access the box with DCC and also the web interface but when i plug it in to the tv/sat nothing. It just sits with the standby led lit.

I also have a DM600S and i've tried its power supply and still the same.

Any one have any ideas?

oh, its an original DM500S, well according to the MAC address anyway LOL

[.: JaCkPoT :.]

Well im not experienced but it sounds like your boot loader is fcuked..you may need to jtag

[icewater]

Thanks .:|SaDiQ999uK|:. for the reply,

I was afraid i would get this answer, suppose i'll have a read up on jtag while i wait and see if anyone else has a thought.

[Curious123]

If you are able to access the dm500 in any way than I do not think it needs to be jtagged. Try unzipping the file attached and flashing that to your dm500 and then flashing a dreambox image to your dm500.

[.: JaCkPoT :.]

Well i did say im No good with DMs

[Curious123]

You should only jtag your box when all else fails and there is literally nothing you can possibly do to your your box to make it respond to you i.e basically when your box is dead for all intents and purposes.

[icewater]

Originally Posted by Curious123 If you are able to access the dm500 in any way than I do not think it needs to be jtagged. Try unzipping the file attached and flashing that to your dm500 and then flashing a dreambox image to your dm500.

HI Curious123,

I've already tried this and it still didn't work!

Any other Ideas?

Regards

[satfoot]

You wrote that "I can flash/erase firmware with dreamup i can access the box with DCC and also the web interface but when i plug it in to the tv/sat nothing. It just sits with the standby led lit."


If you can communicate with the Box, it means that it lets you complete the set-up, no? So, at what stage after flashing with Dreamup does it go into standby?

[icewater]

As soon as i turn the box on, the red standby led lights up and thats it, nothing! however as of today im having trouble connecting with DCC yet i can still still flash/erase with dreamup???

[satfoot]

Have you been flashing a raw Image or a backup?

[icewater]

I've been flashing a raw image, i don't have a backup image,
lost it when my hard drive failed and forgot to make a new backup!

Silly me!!!

[Curious123]

Silly question but are you flashing the same image all the time or have you tried various dm500 images?

[icewater]

i have tried mediavox-dm500 and i downloaded an official image off dream multimedia website, have also flashed the erase.img but still no luck

regards

[satfoot]

I would try again what Curious suggested in Post #4. For some odd reason, it may not work the first time but may require a second try before it works. And it's the best method that there is. The Dreamup Version which I currently use for my DM500 is V 1.3.3.4.

[icewater]

OK!

Thanks satfoot i done what curious suggested i used his erase.img and flashed pli.img. I think i'm getting somewhere, i can now see the dreambox in my router, i can DCC and Flashfxp into the dm500 and also access the webinterface. But still sitting with standby led on constant.

On the webinterface i went to shutdown and brought up a list shutdown/restart/reboot/standby/wakeup.

Should i click wakeup maybe????

Regards