[Devilfish]

How Do I Use Dreamup?

If, for any reason, your box won't boot, you will have to use Dreamup to flash an image instead of Flash Wizard Pro or any other method. You won't be able to connect via ethernet so no ip address is required. It may be that the process simply hung up during flashing or you accidentally pulled the plug half way through (yes it did happen to me). This will get you back on track.

Required

• Null Modem Cable (this is NOT the same as a serial or rs232 cable, although it looks the same)
  
• Image File (.img)
• DreamUp Program
  

Instructions

• Disconnect all cables from your dreambox, including the power
• Connect the null modem cable to the dreambox and to your PC
• Load Dreamup.exe
• Click Connect and you will see a message like this

• Connect the power and the bootloader should be copied to the box
• The message should now say 'Box attached and Ready'
• Click Flash on the right hand side and select the image to be flashed

• Click Yes or Ya (depending on the version)

Note: If you're flashing a backup image, select NO.

• The image should then be uploaded to the box
• There will be a countdown timer at the bottom of the program

• After the image is uploaded, it will be flashed to memory
• The finished process should look like this:

• Click OK and close down Dreamup
• Power off the dreambox for 30 seconds then power up
• If any errors appear, check all cables are connected properly and repeat the process but do not use the PC while it's running

Good Luck!

[opsmonkey]

cheers DF.. a welcomed addition to the DB sat section..

[alfiezuk]

Hi

Can some one show me how i can upload the Cccam 1.2 files on dm500s.

Many Thanks

[mitchell787]

ive done the dreamup with darkstar2

i connected box to router with ethernet
dloaded cccam2.0.10
then added satanbundle

and alas nothing

im missing something?

[mitchell787]

have you dloaded cccam via addons menu

[rickster1]

hi mate wanering if you can point me in right direction my mate got sky and just bought a dreambox can you tell me what i need to do to it to get channels ive done it for cable no probs not sure if same for sky cheers m8

[dsledge]

Anyone know how i restart the cccam wont give me the option by holding down the info button

[anter]

thank you so much

[Bonesy]

Originally Posted by dsledge Anyone know how i restart the cccam wont give me the option by holding down the info button

If using dk1.1 just hold info button for 3 secs will do it.

[aitbenassil]

Many Thanks

[boolean]

thank,s a lot m8

[Bard]

Hi all!

I flashed E2 (newnigma2) into my box before last weekend, and it worked fine. However it took ages to boot, and I tried a few days ago to flash my "old" Gemini 4.50 image back as that has been working without problems for a long time.

My problem is that the box won't connect to DreamUp. Both lights at the front are on (the red and the green), but it is strange I cannot connect from my pc to the box. When I click the Flash-button and connect the AC, the box don't return any signal, and the connection stops where it says "connection prepared, please switch on the Dreambox". It won't go any further than that.

I hope I haven't done anything wrong, but can anyone shed some light as to what I can do? All help most appreciated. I've spent a few nights trying to sort it, but I can't find anything on the net that helps. Thanks!

Bard.

[ICSD]

thank you

[djuka2009]

Thanx mate, this wake up my dm

[a-nico]

Hi guys , I am trying to upload a new image on my DM500+ with dream up utility and after i do the process the result is always the same Ivalid flash and the dream box will be unusable now . can some body tell me what I am doing wrong .I checked all the cables and all is good
Thanks