Newbie Help - Setting up a 500S for the first time.

**Iekos** · 01:21 PM

Hi Guys,

I just got my 500S from DVBMonkey.com and I need help setting up please. I have a few questions.

I have a 'service' that will give me the 'channels' I want. They require I have CCcam 2.09 installed then edit the CCcam.cfg.

My current setup is a SkyUK dish that the last home owners used.
I have a 500S which has access to the internet.

Where do I start? What image do I install? Everyone always recommends the Gemini 4.50 MaxVar but is this the correct image?

Once I install the image, I can edit the CCcam.cfg which is in var/etc but what else must I do to ensure I get all the channels?

Thanks in advance

**firestorm**

DO NOT PUT gemini on it this will kill your box try nabilo then you can download Cccam via pressing the yellow button twice.To edit your Cccam.cfg file you will need a program called DDC(dreambox control centre)by service i asume to mean cardsharing you must also create a dynamic ip address (no-ip is free just google)also you must open some of your ports in your rooter i think it is against the rule to show you how to c/s here

**Iekos**

Originally Posted by firestorm

DO NOT PUT gemini on it this will kill your box try nabilo then you can download Cccam via pressing the yellow button twice.To edit your Cccam.cfg file you will need a program called DDC(dreambox control centre)by service i asume to mean cardsharing you must also create a dynamic ip address (no-ip is free just google)also you must open some of your ports in your rooter i think it is against the rule to show you how to c/s here

excellent.

Thank you for that.

I Already use Dynip but I need to know what ports to have open on the router. Any ideas?

And yes, service meaning CardShare.

**Curious123**

Most people open 12000 as the default port for C/S.

**Iekos**

Got it working.. It wasn't that bad at all to setup..

Thanks for all your help

PS. DVBMonkey.com also thanks for your help too.

**.: JaCkPoT :.**

Glad youll be going sleep in peace now. Thanks to our helpers firestorm and curious. Now you can help others who need similar help hopefully.

**firestorm**

sorry i could not get back to you i have had internet problems

**bigboy99**

so guys with out starting a new thread i have to get my dm500 install nabilo edit the cfg and bang it works the ip adress its the one that my internet uses its a static one should this be ok

**firestorm**

use the Dynip address you made

**Iekos**

I'm a bit confused..

Where do you insert your static IP or domain? In CCcam.cfg? And if so where?

**firestorm**

On the M line you have only your ip/dyndns and your password. M: { your.dyndns.com { password }}
On the D line you have the peers listen to where you want connect.D: { 192.168.1.5 { 8000 7000 { AAA1234 { A3 A3 }}}}

**Curious123** · 11:36 PM

Guys even though firestorm is doing a great job can I just suggest you go to eurocardsharing.com and checkout the thread 'beginners guide to cardsharing'. There is no way that all your questions about cardsharing can be answered in this thread or this forum.

**cgscott**

Makes interesting reading though!

**firestorm**

totaly agree with you Curious123 he need to go there and do some trial an error who you are shareing with will help you they can even set up your box over the net if you open the right ports

**Curious123**

@firestorm I am glad you agree with me as I didn't want you to feel I was trying to undermine the fine assistance that you were trying to provide to all of these people. I think cardsharing is far too complex for a beginner to understand without some initial reading or research.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
time zone setting problem	arashkhaan	IPBox	4	8th April, 2009 09:51 AM
newbie (again) 500s	mickz	Sat Dreambox	5	31st January, 2009 02:08 AM
Hi From a Newbie (500s)	mickz	Introduce Yourself	1	30th January, 2009 07:12 PM
newbie setting up dm800	mikebuzz	Cable Dreambox	15	21st December, 2008 06:37 PM
Setting Up New 500s	branoox	Sat Dreambox	8	26th August, 2008 05:43 PM

Curious123 V.I.P. Member Join Date: Apr 2008 Posts: 1,503 Thanks: 26 Thanked 335 Times in 293 Posts Downloads: 33 Uploads: 0	Most people open 12000 as the default port for C/S.

Iekos Junior Member Join Date: Mar 2008 Posts: 25 Thanks: 3 Thanked 5 Times in 3 Posts Downloads: 3 Uploads: 0	Got it working.. It wasn't that bad at all to setup.. Thanks for all your help PS. DVBMonkey.com also thanks for your help too.

firestorm DK Veteran Join Date: Jul 2008 Location: home of the pie Posts: 368 Thanks: 50 Thanked 60 Times in 57 Posts Downloads: 43 Uploads: 0	sorry i could not get back to you i have had internet problems __________________ dreambox 7020si, DM8000, 1meter motorized ISS dish,1.5m fixed with a single Invacom 0.3 LNB and feedhorn "God made pot. Man made beer. Who do you trust"

bigboy99 Newbie Join Date: Oct 2008 Posts: 17 Thanks: 3 Thanked 1 Time in 1 Post Downloads: 12 Uploads: 0	so guys with out starting a new thread i have to get my dm500 install nabilo edit the cfg and bang it works the ip adress its the one that my internet uses its a static one should this be ok

firestorm DK Veteran Join Date: Jul 2008 Location: home of the pie Posts: 368 Thanks: 50 Thanked 60 Times in 57 Posts Downloads: 43 Uploads: 0	use the Dynip address you made __________________ dreambox 7020si, DM8000, 1meter motorized ISS dish,1.5m fixed with a single Invacom 0.3 LNB and feedhorn "God made pot. Man made beer. Who do you trust"

cgscott V.I.P. Member Join Date: Jul 2008 Location: In Scotland Age: 27 Posts: 628 Thanks: 38 Thanked 115 Times in 95 Posts Recipes: 1 Downloads: 53 Uploads: 5	Makes interesting reading though!