[.: JaCkPoT :.]

Guide for the newbies.

Heres how to load the patches.

• Download the relevant patch and extract.
• Download the relevant loader and extract.
• Connect your receiver to the pc via rs232c cable.
• Choose the correct com port.
• Leave the receiver on standby.
• Open the loader and select the software tab.
• Press browse and find the extracted patch.
• Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

• Download the correct patch for your receiver.
• Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
• Insert your usb memory stick in the usb port under the front flap.
• Turn the receiver on ready to load the patch then press the usb button on your remote.
• on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk and Benny/9

[tee23uk]

Originally Posted by Sadiq999uk Guide for the newbies. Heres how to load the patches. Download the relevent patch and extract. Download the relevent loader and extract. Connect your receiver to the pc via rs232c cable. Choose the correct com port. Leave the receiver on standby. Open the loader and select the software tab. Press browse and find the extracted patch. Press ok then start then wait. This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same. Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in. Hope this is found helpful. Sadiq999uk

hi i have the technomate 6900 but all still scrambled im using s/w version 6.53p june 27th on cass menu can you advise me if ive got something wrong thank you

[scubamuppet]

Thanks for the info.

[titian40]

Thanks for help. The AU delay has fooled me before!

[.: JaCkPoT :.]

Originally Posted by titian40 Thanks for help. The AU delay has fooled me before!

i take it your sorted now.

[binpap]

thank you for the info

[dundeejim]

can i use a usb flash pen instead m8?

[.: JaCkPoT :.]

If you got usb receiver then ofcourse.

[dundeejim]

the patch wont go on the pen

[.: JaCkPoT :.]

You have to extract the file first, the box cant unzip or extract. Try that.

[dabba]

what is the difference between patching and softcam ?

there appears to be new for both almost daily, do they need patching daily ?

thanks

[.: JaCkPoT :.]

A patch is firmware/software to help your receiver work which has keys already in it but when they expire they need to be updated to thats what the softcam does.

[dundeejim]

yes when i try to extract say something about cant do it

[dabba]

Originally Posted by dabba what is the difference between patching and softcam ? there appears to be new for both almost daily, do they need patching daily ? thanks

and do the soft cams AU?

how often on average do they req updaing ?

[.: JaCkPoT :.]

Keys au very regularly on some channels and on others after a period of time.