[antgc1973]

Hi guys
Just tried the firmware update which installed fine, BUT I still cannot view premium channels. Any ideas? I have checked the system status and the new firmware is showing. I have deleted all old channels, done a factory reset, scanned channels and still no premiums? Any ideas? I have heard that there are codes which can be entered, but I'd rather avoid this if possible.

[dell_xps]

Originally Posted by antgc1973 Hi guys Just tried the firmware update which installed fine, BUT I still cannot view premium channels. Any ideas? I have checked the system status and the new firmware is showing. I have deleted all old channels, done a factory reset, scanned channels and still no premiums? Any ideas? I have heard that there are codes which can be entered, but I'd rather avoid this if possible.

Turn the code in the menu to on,emu to on.
If you take the time to read all of this thread m8 all is explained within it.

[baldie2]

hi cant get pc to recognise box for update help please

[baldie2]

hi how do i put codes in desperate plse help

[dell_xps]

Originally Posted by baldie2 hi how do i put codes in desperate plse help

menu system setup parental control then i on the remote then 2007.
Why are you using codes m8?

[baldie2]

only one line for codes which are 2 lines bit of a novice

[dell_xps]

Originally Posted by baldie2 only one line for codes which are 2 lines bit of a novice

Go to 00 then press right on the remote you'll now see it changes to the 01 numbers m8,ok.

[tedldoo]

Sorry for being a numpty fellas...just got one of these..done the update...cant get the premium channels...how do i turn the EMU on please?

[dell_xps]

Originally Posted by tedldoo Sorry for being a numpty fellas...just got one of these..done the update...cant get the premium channels...how do i turn the EMU on please?

M8 not wanting to sound rude but the answer is a couple of posts above.

dell_xps Quote:
Originally Posted by baldie2
hi how do i put codes in desperate plse help

menu---- system setup----- parental control----- then i on the remote then 2007,turn EMU to on,Code to on in the menu to.

[tedldoo]

Thanks M8...I did see that post and looked there...but cannot see EMU...is it under another heading?

[dell_xps]

KEY EMU.
HTH

[noel1]

many thanks, i will try to install download now

[kbliverpool]

i have got a pvr starview 3 i put the hard drive in but it is saying on hdd fitted it is in properly but it is not working can you please help thanks

[Tonymc3]

I successfully applied this "TheBoxPVR_v3105_08Dec2008.bin" and after help from forum (many thanks) got all channels again - all fine and dandy. So then I noticed the newer BIOS appear "The Box PVR (Dual Tuner) AU Fix 211208" and applied that via null modem and USB cables and to my surprise when the box rebooted it had reverted to an older BIOS "BoxPVR_E_v4506_15Oct.bin". After checking everything twice I have reverted back to "TheBoxPVR_v3105_08Dec2008.bin" and all is fine again. What am I missing? Anybody got any ideas? I only post this as it may help someone else. Thanks again for assistance. Tony

[dinga]

Tony,
Having the same problem with the xmas eve update,
the epg works much better,but have lost BBC 3/4 and a few others, but it would seem all ppv channels are working.
Like yourself a few ideas would come in handy.